At what point should the storage pool be connected to a replacement DPM server?

I have backed up the DPMDB and SQL DB from our "old" DPM server, removed it from the domain, and installed the same version, DPM 2007, SP1, on a new server with the same FQDN. At what point do I connect the storage pool to the new server?
Before restoring the db, or after restoring the db but before doing a dpmsync? Nowhere in the sea of documentation on migrating and upgrading have I found that little detail mentioned. Please help!

Mike, I'm doing another DPM rebuild and upgrade, and I connected the storage pool too soon. Can I save the situation, or do I need to detach the disks, uninstall DPM, delete the db, reinstall, restore the db from the previous backup, and then attach
the disks and sync? Thank you!

Similar Messages

At What Point Should a MBP SuperDrive Pull in Disc?

Couldn't really find anything specific about this, but title basically says it all: At what point should a MacBook Pro SuperDrive pull in a disc?
I ask because it seems as though I need to basically push it in as far as it can go before it gets sucked in.
Thanks in advance!

It won't pull it in until there's less then 1cm left out (i.e. almost all the way in before it pulls the rest)

What size should the original image be for 100% width so it is responsive?

What size should the original image be for 100% width so it is responsive?

Please check these documents for details :
https://helpx.adobe.com/muse/how-to/muse-optimize-graphics-assets.html
https://helpx.adobe.com/muse/how-to/muse-size-resolution-graphics.html
Thanks,
Sanjit

My sound has disappeared-what position should the toggle switch be in? Also my e-mails sticks a lot of the time.

My sound has disappeared - what position should the toggle switch be in? Also, my e-mail sticks a lot of the time, same old problem, no solutions.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

I am getting the error "Unable to connect to data warehouse management server" when I try to register it DWMS

I have a Data Warehouse Server that appears to be functioning but is running System Center Service Manager 2010 (w/ out SP1), Also have a functioning Configuration Management Server with Reporting Services Point installed the is running System Center
2012. Both systems are VM's running Windows Server 2008 R2 Enterprise w/ SP1 fully patched. Both systems are running SQL Server 2008 R2 as well. When I try to register the Data Warehouse Server via the GUI using the console or in Powershell it errors
out. Particularly on the GUI with the error "Unable to connect to data warehouse management server". I can browse to it, ping it, get the configuration management reports to run and show my AD assets, etc... but it will not register the DWS. I have
tried every suggestion TechNet has to offer and I am hitting a wall. Can someone please, please, please help!?!

unplug modem and router and reboot.
check setting for network, verify password.
sign in. Enter computer information.
let me know if this works.

What Roles should the gwconnector user have in CRM

Hi Guys,
I have setup GWConnector etc and have assigned GWConnector user with full admin rights on the CRM system.
I cannot find any document that tells me what roles this user must have etc?
Could one of you guys either tell me what they should be - or point me to the right documentation as itu2019s not in the groupware setup guide only the AD stuff?
Thanks

Honeslty, that is up to you. I have customers that start off WLC and AP all in the same subnet, but it is not necessary. I also have customers that put the WLC mgmt in the 'server' VLAN, and the AP in their own.
IMHO, I like the WLC to be in 'server' or 'secured' VLAN, then I put the AP in their own VLAN that is locked down to only getting DHCP and talking to the WLC. that way if someone unplugs an AP and connects something they can't get anywhere.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Ipad - how to see what is using the storage?

my ipad has 13.6GB capacity but only 1.0 GB available.
Is there a way to see what is using the capacity?

Connect to your computer.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

What size should the back-up drive be?

I'm using a lacie 1TB External firewire drive to back-up my 250gig iMac, I mostly use the mac for email, photos, home use etc. (The drive is almost full, using 230 gig). (Yes I know that's too full and I plan to put in a 500 gig drive). I upgraded to leopard about a month ago and set up time machine recently. There are 17 backups- "lines" in the time machine "star wars" screen- on the external drive totaling 700 gig of data!!
I have not added any pictures or large files since beginning to use Time machine. Should the time machine backups use that much space? I thought after the initial back-up time machine only keeps record of the changes.? Using CCC I could have cloned the hard drive three times and still have room left!
Does the large amount of HD space used to back-up sound ok for only a 250 hard drive?
Joe

Many users here recommend that your TM volume be about two and a half times the size of the data on your main hard drive. So, if you have 400GB of data to back up, you should give TM a 1GB volume for backing up.
But in my experience, how much space you need really depends on your computer usage patterns. My weekly backups go all the way back to January 2008, when I first started. My main hard drive has 115 GB used of 148 GB total. My TM backups of that disk total 168 GB on a 212 GB partition. So I have never needed to have nearly as much backup space as the 2.5 multiplier recommendation.
I try to manage my computer use so that Time Machine is not backing up files I do not want backed up, and is not backing up stuff twice if I move files to a different location. I rarely work with large files (no photoshop, no Final Cut Pro, etc). When I do have large files, they usually start in my Downloads folder. If I want to keep something I download, I eventually move it to a different location. To prevent TM from backing it up twice and unnecessarily using up space on the TM drive, I exclude my Downloads folder from being backed up. I'll let TM back it up after the download is in its new permanent location.
I don't really consider it a big deal to not have backups of the contents of my downloads folder. I figure that if my hard drive breaks and I lose all of my downloads, I can just download them again.

At what point does the iPhone 5 need to charge?

At what voltage does the iPhone 5 need to charge?

When it gets low, typically at about 10% you get a prompt. It is a good idea to let it go completely flat once a month

On update to 13.1, my catalog only shows what was on the camera that was connected. Where did the rest of my (thousands of) pictures go?

After installing an upgrade from Elements 11 (it would no longer open, even with uninstall and re-installation) to Elements 13, everything was working great. Today I did an update to Elements 13.1, and all that appears in mu catalog are pictures from the camera that was connected at the time of the update. Because I have a small-ish SSD for my OS (Windows 7), the program is installed on the E drive. The Catalog Manager shows only a single catalog, but I have no idea where it is located, nor where to begin to look for an older catalog file that might be somewhere else. How do I find and recover my old catalog file?

juanm66274179 a écrit:
I found the catalog file in my C drive (207mb) with a modified date of today. Can I move the file to another drive? The fact that it is 207mb would indicate that everything should be there- correct? I have 200+ gigs of pictures and 800+ gigs of video.
That seems to be the right folder. You can move or copy the whole folder elsewhere and use the catalog manager to browse to the new location. Alternatively, once the new catalog is moved, you can open the Organizer with it by double clicking on the 'catalog.pse13db' file.
Is there something that changed in the view options to where I am having trouble selecting a "view all" option? All of the folders are listed in the folder view, but my "people" view is now blank. How do I get all folders to be viewed in the "all media" section instead of just my last import?
I have no clue about the 'people' view (I don't use it). By default, only the last import batch is shown. You have a 'sort order' menu on the left of the third line. Choose another sort order. If you are not shown 'All media', you should have a button (arrow shape pointing to the left) on the left of the third line.

What jar contains weblogic.jdbc.pool.Driver connection pool class?

Hi all,
I am trying to use the JDeveloper IDE to generate code that I'll deploy on WebLogic
6.1.
I want to add the necessary files to the JDeveloper classpath so that during development
it can use my
weblogic connection pool. I've looked all over and can't seem to find it. It's
not in weblogic.jar. Anyone know
what file contains weblogic.jdbc.pool.Driver?
Thanks in advance,
Norm

Thanks. I don't know how I missed it in the first place.
"Sree Bodapati" <[email protected]> wrote:
weblogic.jar
sree
"Norm Heske" <[email protected]> wrote in message
news:3ba246c2$[email protected]..
Hi all,
I am trying to use the JDeveloper IDE to generate code that I'll deployon
WebLogic
6.1.
I want to add the necessary files to the JDeveloper classpath so thatduring development
it can use my
weblogic connection pool. I've looked all over and can't seem to findit.
It's
not in weblogic.jar. Anyone know
what file contains weblogic.jdbc.pool.Driver?
Thanks in advance,
Norm

One of the DC can't connect to AD for Windows server 2003

Dear Sir,
We have 2 Domain Controllers in our Domain, DC1 and DC3, which is running on Windows Server 2003 SP2, I found the DC3 failed to connect to AD, and I found the following error message logged in the system event many time
Source: MRxSmb
Type : Error
主瀏覽器從電腦 DC1 收到認為它是傳輸 NetBT_Tcpip_{C1D9AA59-2423-4059-A773 網域主瀏覽器的伺服器宣告。主瀏覽器已中止或已強制選擇。
Source: KDC
Type: warning
找不到事件識別碼 20 (在來源 KDC 中) 的描述。本機電腦可能沒有所需的登錄資訊或訊息 DLL 檔案，因此無法顯示發自遠端電腦的訊息。您可以使用 /AUXSOURCE= flag 來重新抓取這個描述。請參閱 [說明及支援] 來了解詳細資料。以下資訊為事件的一部份: 事件日誌檔已損毀。
Source: Kerberos
Type: Error
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically
named machine accounts in the target realm (Domain name), and the client realm.   Please contact your system administrator.
I have searched on internet, and tried some of the suggestions but still can't fixed the issue, I also can't depromo the DC3, and can't use remote desktop connection connect to DC3
What can I do now, can I just reinstall the DC3 and process the dcpromo again?

Hi Calin,
Here is the log content for your reference:-
Domain Controller Diagnosis
Performing initial setup:
   * Verifying that the local machine DC3, is a DC.
   * Connecting to directory service on server DC3.
   * Collecting site info.
   * Identifying all servers.
   * Identifying all NC cross-refs.
   * Found 2 DC(s). Testing 1 of them.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\DC3
      Starting test: Connectivity
         * Active Directory LDAP Services Check
         * Active Directory RPC Services Check
         ......................... DC3 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\DC3
      Starting test: Replications
         * Replications Check
         [Replications Check,DC3] Inbound replication is disabled.
         To correct, run "repadmin /options DC3 -DISABLE_INBOUND_REPL"
         [Replications Check,DC3] Outbound replication is disabled.
         To correct, run "repadmin /options DC3 -DISABLE_OUTBOUND_REPL"
         ......................... DC3 failed test Replications
      Test omitted by user request: Topology
      Test omitted by user request: CutoffServers
      Starting test: NCSecDesc
         * Security Permissions check for all NC's on DC DC3.
         * Security Permissions Check for
           DC=ForestDnsZones,DC=domain,DC=COM,DC=HK
            (NDNC,Version 2)
         * Security Permissions Check for
           DC=DomainDnsZones,DC=domain,DC=COM,DC=HK
            (NDNC,Version 2)
         * Security Permissions Check for
           CN=Schema,CN=Configuration,DC=domain,DC=COM,DC=HK
            (Schema,Version 2)
         * Security Permissions Check for
           CN=Configuration,DC=domain,DC=COM,DC=HK
            (Configuration,Version 2)
         * Security Permissions Check for
           DC=domain,DC=COM,DC=HK
            (Domain,Version 2)
         ......................... DC3 passed test NCSecDesc
      Starting test: NetLogons
         * Network Logons Privileges Check
         Verified share
\\DC3\netlogon
         Verified share
\\DC3\sysvol
         ......................... DC3 passed test NetLogons
      Starting test: Advertising
         Warning: DsGetDcName returned information for
\\dc1.domain.COM.HK, when we were trying to reach DC3.
         Server is not responding or is not considered suitable.
         The DC DC3 is advertising itself as a DC and having a DS.
         The DC DC3 is advertising as an LDAP server
         The DC DC3 is advertising as having a writeable directory
         The DC DC3 is advertising as a Key Distribution Center
         The DC DC3 is advertising as a time server
         [DC1] LDAP bind failed with error 8341,
         Win32 Error 8341.
         Server DC3 is advertising as a global catalog, but
         it could not be verified that the server thought it was a GC.
         ......................... DC3 failed test Advertising
      Starting test: KnowsOfRoleHolders
         Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
         [DC1] DsBindWithSpnEx() failed with error -2146893022,
         Win32 Error -2146893022.
         Warning: DC1 is the Schema Owner, but is not responding to DS RPC Bind.
         Warning: DC1 is the Schema Owner, but is not responding to LDAP Bind.
         Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
         Warning: DC1 is the Domain Owner, but is not responding to DS RPC Bind.
         Warning: DC1 is the Domain Owner, but is not responding to LDAP Bind.
         Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
         Warning: DC1 is the PDC Owner, but is not responding to DS RPC Bind.
         Warning: DC1 is the PDC Owner, but is not responding to LDAP Bind.
         Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
         Warning: DC1 is the Rid Owner, but is not responding to DS RPC Bind.
         Warning: DC1 is the Rid Owner, but is not responding to LDAP Bind.
         Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
         Warning: DC1 is the Infrastructure Update Owner, but is not responding to DS RPC Bind.
         Warning: DC1 is the Infrastructure Update Owner, but is not responding to LDAP Bind.
         ......................... DC3 failed test KnowsOfRoleHolders
      Starting test: RidManager
         * Available RID Pool for the Domain is 9126 to 1073741823
         * dc1.domain.COM.HK is the RID Master
         ......................... DC3 failed test RidManager
      Starting test: MachineAccount
         Checking machine account for DC DC3 on DC DC3.
         * SPN found :LDAP/DC3.domain.COM.HK/domain.COM.HK
         * SPN found :LDAP/DC3.domain.COM.HK
         * SPN found :LDAP/DC3
         * SPN found :LDAP/DC3.domain.COM.HK/domainHK
         * SPN found :LDAP/34106c30-327d-4d63-ae93-fec48cac2975._msdcs.domain.COM.HK
         * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/34106c30-327d-4d63-ae93-fec48cac2975/domain.COM.HK
         * SPN found :HOST/DC3.domain.COM.HK/domain.COM.HK
         * SPN found :HOST/DC3.domain.COM.HK
         * SPN found :HOST/DC3
         * SPN found :HOST/DC3.domain.COM.HK/domainHK
         * SPN found :GC/DC3.domain.COM.HK/domain.COM.HK
         ......................... DC3 passed test MachineAccount
      Starting test: Services
         * Checking Service: Dnscache
         * Checking Service: NtFrs
         * Checking Service: IsmServ
         * Checking Service: kdc
         * Checking Service: SamSs
         * Checking Service: LanmanServer
         * Checking Service: LanmanWorkstation
         * Checking Service: RpcSs
         * Checking Service: w32time
         * Checking Service: NETLOGON
            NETLOGON Service is paused on [DC3]
         ......................... DC3 failed test Services
      Test omitted by user request: OutboundSecureChannels
      Starting test: ObjectsReplicated
         DC3 is in domain DC=domain,DC=COM,DC=HK
         Checking for CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK in domain DC=domain,DC=COM,DC=HK on 1 servers
            Object is up-to-date on all servers.
         Checking for CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK in domain CN=Configuration,DC=domain,DC=COM,DC=HK on 1 servers
            Object is up-to-date on all servers.
         ......................... DC3 passed test ObjectsReplicated
      Starting test: frssysvol
         * The File Replication Service SYSVOL ready test
         File Replication Service's SYSVOL is ready
         ......................... DC3 passed test frssysvol
      Starting test: frsevent
         * The File Replication Service Event log test
         There are warning or error events within the last 24 hours after the          SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
         An Warning Event occured. EventID: 0x800034C4
            Time Generated: 11/04/2014   15:59:23
            (Event String could not be retrieved)
         ......................... DC3 failed test frsevent
      Starting test: kccevent
         * The KCC Event log test
         Found no KCC errors in Directory Service Event log in the last 15 minutes.
         ......................... DC3 passed test kccevent
      Starting test: systemlog
         * The System Event log test
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:11:27
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was
ldap/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
         An Error Event occured. EventID: 0x00000423
            Time Generated: 11/05/2014   11:11:27
            Event String: The DHCP service failed to see a directory server for authorization.
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:29:56
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was
LDAP/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:29:56
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was domainHK\DC1$. This indicates that the password
used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:43:20
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was cifs/dc1.domain.COM.HK. This indicates that the
password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system
administrator.
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:50:39
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was ldap/dc1.domain.COM.HK. This indicates that the
password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system
administrator.
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:50:41
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was ldap/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK.
This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.
Please contact your system administrator.
         An Error Event occured. EventID: 0x40000004
            Time Generated: 11/05/2014   11:50:41
            Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk. The target name used was LDAP/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK.
This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.
Please contact your system administrator.
         ......................... DC3 failed test systemlog
      Test omitted by user request: VerifyReplicas
      Starting test: VerifyReferences
         The system object reference (serverReference)          CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK and backlink on
CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK          are correct.
         The system object reference (frsComputerReferenceBL)          CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK
and backlink on CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK are          correct.
         The system object reference (serverReferenceBL)          CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK
and backlink on          CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK          are correct.
         ......................... DC3 passed test VerifyReferences
      Test omitted by user request: VerifyEnterpriseReferences
      Test omitted by user request: CheckSecurityError
   Running partition tests on : ForestDnsZones
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
   Running partition tests on : DomainDnsZones
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
   Running partition tests on : Schema
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
   Running partition tests on : Configuration
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
   Running partition tests on : domain
      Starting test: CrossRefValidation
         ......................... domain passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... domain passed test CheckSDRefDom
   Running enterprise tests on : domain.COM.HK
      Starting test: Intersite
         Skipping site Default-First-Site-Name, this site is outside the scope          provided by the command line arguments provided.
         ......................... domain.COM.HK passed test Intersite
      Starting test: FsmoCheck
         Warning: Couldn't verify this server as a GC in this servers AD.
         GC Name:
\\dc1.domain.COM.HK
         Locator Flags: 0xe00003fd
         PDC Name:
\\dc1.domain.COM.HK
         Locator Flags: 0xe00003fd
         Time Server Name:
\\dc1.domain.COM.HK
         Locator Flags: 0xe00003fd
         Preferred Time Server Name:
\\dc1.domain.COM.HK
         Locator Flags: 0xe00003fd
         KDC Name:
\\dc1.domain.COM.HK
         Locator Flags: 0xe00003fd
         ......................... domain.COM.HK passed test FsmoCheck
      Test omitted by user request: DNS
      Test omitted by user request: DNS

I have been getting the message 'could not connect to this iCloud IMAP server" on my OS X 10.8.5 and I haven't changed any settings.

"could not connect to this iCloud IMAP server" How can I find a solution to this message? I haven't changed any settings.

Hey irenes883!
Here is an article that can help you troubleshoot this issue:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Take care, and thanks for visiting the Apple Support Communities.
-Braden

At what level are the records pooled in COSS and COSP Tables

Dear All,
I have a question for you. i wold like to know what is the criteria that is taken into consideration while arriving at the totals in the COSS and COSP Tables.
What are the fields that must be similar for some line items to be pooled and shown as a total record in COSS Or COSP Tables.
For Ex: If i have two records in COEP table, what are the fields that must be equall for them to be shown as one Record in COSS or COSP table.
Best Regards
Kumar.D

Criteria for pooling in COSS/COSP is the following:-
Ledger
Object number
Fiscal Year
Value Type
Version
Cost Element
CO subkey
Bus.Transaction
Partner Object
Source Object
Dr/Cr indicator
Trans. Currency
Period block
should be same
Regards
Sach!n

Removing cluster node what happens to the created pools from thatnode

Hi all,
Reading through the documentation I stumble on:
10.2 Considerations for Working with Shared NSS Pools and Volumes in
the Cluster
To create or modify volumes, home directories, Distributed File
Services junctions, or any other elements that are managed using
eDirectory objects, you must cluster migrate the pool resource back to
the node where it was created before you perform those management tasks.
What does this mean when I removed the node from the cluster? Can I no
longer manage the resource??
regards
KB

I have researched the issue with testing and have an update for you.
There were at least three bugs filed in the past where this problem was reported:
- Bug 77248 - Split/Move / NW65SP3 FCS / NCS - Vol Split only works when the target volume is on the original serv
- Bug 413213 - after migrated NSS pool, getting error when creating volume on that pool
- Bug 444644 - OES2 SP1 BUILD GMC3: Not able to create the user home directory on the cluster enabled volume
What I have learned from working with testing is that the problem occurs only if the server, pool, volume, and cluster objects are in different contexts. The recommended configuration is that they be in the same context, which is why most admins never see the problem. If the objects are in different contexts, eDirectory might not be able to find the information needed to perform the operation and you get an eDirectory error. Whether or not you might run in to this issue depends on how you have set up a cluster and whether you attempt to modify or perform management actions on the pool or volume later that involve an eDirectory object in a different context.
In light of this new information, I am updating the Novell Cluster Services Administration Guide with the following statement. This guide will be re-published the week of August 2, 2010.
10.2 Considerations for Working with Shared NSS Pools and Volumes in the Cluster
http://www.novell.com/documentation/...a/bffygy4.html
The Server, Pool, Volume, Cluster Resource, and Cluster objects should all be all in the same context.
If the objects are in different contexts, you might receive an eDirectory error when you attempt to modify the pool, create or modify the volumes, home directories, Distributed File Services junctions, or any other elements that are managed using eDirectory objects. To resolve the problem, you must cluster migrate the pool cluster resource back to the node where the pool was created in order to perform those management tasks.

At what point should the storage pool be connected to a replacement DPM server?

Similar Messages

Maybe you are looking for