At what temp does the P4's start to Throttle

hi.
at what temperature does the P4's start to throttle down? my P4 3.0 ghz is about 54-55 degrees celsius at idle and about 57-58 in load mode, is it a chance that it starts to throttle at this temps?
the temps are in windows mode and mesaured in MotherBoard Monitor

70C is the figure I have seen.

Similar Messages

At what temp does the fan hit 100%? NX8800GT OC 512mb

It says in Rivatuner that it's set at 29% auto control, at what point does it speedup? BTW is it safe to follow this fan speed guide? Link here: http://www.guru3d.com/article/article/449/1/
Thanks.

I have the same problem: the card shows freaking squares during games randomly.
Setting up the speed manually to 50% solves the problem.
I touched the surface of the cooler before that: it gets really hot close to the DVI-Ports, that is where the issues are.
Anyways, that was reason enough for me to modify a BIOS.
The BIOS in the attachment is the newest by eVGA, which adjusts the fan speed. I just adjusted the clocks, and the vendor IDs and stuff, so it is shown as MSI card.
The BIOS Version is: 62.92.24.00.01 compared to MSI's 62.92.16.00.04!
Google for the flash procedure! You will void the warranty, and I am not responsible if you mess this up! I tested the BIOS and it solved my problems.
In the rar-file you'll find the original eVGA and MSI BIOS, NiBiTor and the MSI_new.rom, which is the modified file.
CHeck the BIOS and compare them, if you don't trust me, which I totally understand!
Handle with care, this might kill your card!
http://rapidshare.com/files/88071553/MSI_NEW.rar

What temp does the fan turn on at?

Yeah my comp was just up to 73c before i put a book under it to prop it up and I heard no fan. Is this normal?

From reading these boards in the past week, i believe the fan begins to kick on at 70 degrees C
Correct me if i'm wrong of course.
I'm curious as to what temperatures are tooooo high, and warrant attention immediately

What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?

What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?
The workflow manager configuration wizard crashes with the below error when used a domain account (setup account with full prvilige on sql and server). It requires some specific permissions on AD ? I couldnt see any documentation stating what permission
it requires.
Can anyone help ?
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: AUTRTV22OQMI5JWSVNDSSNCH0E5DQ2L1
Problem Signature 02: 1.0.20922.0
Problem Signature 03: 505e1b30
Problem Signature 04: System.DirectoryServices.AccountManagement
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa5bda
Problem Signature 07: 3ef
Problem Signature 08: 348
Problem Signature 09: KCKGYE1NBUPA2CLDHCXJ0IFBDVSEPD1F
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1044
Additional Information 1: 8e7b
Additional Information 2: 8e7b3fcdf081688bfcdf47496694f0e4
Additional Information 3: c007
Additional Information 4: c007e99b2d5f6f723ff4e7b990b5c691
Log Name:      Application
Source:        Application Error
Date:          27.08.2014 11:47:54
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OSS01-MAP-226.global.corp
Description:
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x23a0
Faulting application start time: 0x01cfc1dbe703a8ac
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 36f30eb4-2dcf-11e4-9415-005056892fae
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
    <EventRecordID>7471545</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OSS01-MAP-226.global.corp</Computer>
    <Security />
</System>
<EventData>
    <Data>Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
    <Data>1.0.20922.0</Data>
    <Data>505e1b30</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.2.9200.16864</Data>
    <Data>531d34d8</Data>
    <Data>e0434352</Data>
    <Data>0000000000047b8c</Data>
    <Data>23a0</Data>
    <Data>01cfc1dbe703a8ac</Data>
    <Data>C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
    <Data>C:\Windows\system32\KERNELBASE.dll</Data>
    <Data>36f30eb4-2dcf-11e4-9415-005056892fae</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>
Log Name:      Application
Source:        .NET Runtime
Date:          27.08.2014 11:47:54
Event ID:      1026
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      OSS01-MAP-226.global.corp
Description:
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
   at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
   at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
   at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
   at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
   at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
   at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
   at System.Windows.UIElement.Focus()
   at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
   at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name=".NET Runtime" />
    <EventID Qualifiers="0">1026</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
    <EventRecordID>7471544</EventRecordID>
    <Channel>Application</Channel>
    <Computer>OSS01-MAP-226.global.corp</Computer>
    <Security />
</System>
<EventData>
    <Data>Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
   at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>,
System.String, System.DateTime)
   at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
   at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
   at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
   at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
   at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
   at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
   at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
   at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
   at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
   at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
   at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
   at System.Windows.UIElement.Focus()
   at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
   at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
   at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
   at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
   at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
   at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
   at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
   at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
   at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
   at System.Windows.Application.RunInternal(System.Windows.Window)
   at System.Windows.Application.Run()
   at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
</Data>
</EventData>
</Event>

Hi Karthik,
You could refer to the series of videos below to install and configure workflow manager in SharePoint 2013:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
The Episode 2 describes the necessary account in AD with right permission in the installation process:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx#episode2
Regards,
Rebecca Tu
TechNet Community Support

What exactly does the global switch command line do ?

Hello All
Just foraging in the dark world of APP-V. I have a question which I cannot find answer for through google.
There are powershell commands to publish an APP-V application globally. What exactly does the global switch do ?
I understand it makes the application available to everyone on the machine for anyone who logs onto that machine.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
Thanks

Correct, the global switch makes the application accessable for all users logging on to that system.
This feature is required for some packages, like Office. But it is ofter used for applications used by everyone, like Adobe Reader.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
A package can be added to the system but until it is published a user cannot start it. They won't see any shortcuts in their startmenu/desktop/etc.
So after you added the package to the system, it must be published to a user or globally (every user) to start it.

HT4854 What size does the recovery partition need to be for Lion or Mt Lion?

What size does the recovery partition need to be for Lion or Mt Lion?

Maybe I'm approaching the problem the wrong way. My problem is that I installed a new HDD in my laptop after cloning it to a backup drive, and I wanted to install the OS after formatting the drive using Disk Utilities from my desktop machine. Since I had Lion installed from the App Store as a paid download, I thought I'd start with a freshly downloaded install of Lion, but I can't access the internet directly with my laptop since it has no OS or apps. So I'm downloading Lion to my desktop machine hoping to install it on my laptop as a Target HD. Is that possible? Does the App Store download allow choosing which drive to install on?

In what QOS does the receiver SOAP adapter work BE or EO?

Hi,
In what QOS does the receiver SOAP adapter work BE or EO?
My guess is that it is by default EO, if so how do i make it work like synchronous?
There is no option to set it explicitly.
Thanks]
Shakthi

Siva,
In receiving adapter you can't set the status. The receiving QOS is set in the pipeline by using the Sender Comm.channel QOS.
So for example in SOAP to SOAP scenario, if you set the Sender comm.channel as BE, then through out the Pipeline till it reaches the Receiver Comm.channel the QOS will be considered as BE only( Even though you didn't explicitly said to the Receiver comm.channel).
Hope it helps!
raj.

What exactly does the Radio Beacon Indicate

I have seen cases where the Radio Beacon is black and when it is gray. When it's black you may or may not be able to go through the wireless router to the modem and then to the internet. When it is gray, you cannot really do anything except be in a local mode. However there are instances when the Radio Beacon is black, rather than gray, and you still cannot access the internet. So, what exactly does the activated Radio Beacon Indicate, i.e., that the wireless network is working and the modem is down, or something else entirely ?

Assuming you're referring to the Airport icon in the menu bar, 'clear/empty' means Airport is turned off, gray bars means Airport is on but not connected to a network, and black bars means Airport is on and connected to a network. Other possible icon states are solid gray with a little computer inset, meaning you're connected to a computer-to-computer created on the Mac, and gray bars with an exclamation point (10.6 only), meaning connected to a network but not authenticated (e.g. wrong password for an 801.2X corporate/university network).
To your question, it's perfectly possible to be successfully connected to a network (black icon) and unable to access the internet. Situations like that would include the network requiring a proxy server, for which you haven't set up the details on in Network Preferences, or you're connected to an open network that requires you to enter information or agree to terms (e.g. a hotel network, where you need to put in your room number and agree to the charges before you can connect to the internet).

What "exactly" does the Brightness setting in Print do?

What "exactly" does the Brightness setting in the Print module do?
I know it's a controversial button, especially now that there are proofing options available. Also, since you're using it "blind" it's impossible to know how much or what it's really doing.
Does anyone know if it's e.g.. the same as going to quick develop and going up on "exposure", or "brightness", or "shadows"... How exactly is it brightening the image, and is +100 a full stop or how is it calibrated?
Thanks,
Alan.

Ooops,
Obviously there is NO brightness control in LR...is the print adjustment similar to an exposure adjustment or more like moving the "shadows" and "whites" adjustments (which if I understand corrrectly, moves tones above or below mid tones, but not highlights or blacks)?

What exactly does the Work Offline option do in a shared review hosted on an internal server?

Hi,
What exactly does the Work Offline option do in a shared review hosted on an internal server?
I *think* it simply disconnects you from the review server. I'm not sure why one would want to do this.
I'm trying to recommend an offline workflow for reviewers who may not be able to access a shared review hosted on our internal server (for example, while traveling). These reviewers would like to be able to comment on an offline version of the review PDF and then publish their comments when they can again connect to the Internet/internal server.
It doesn't seem like "Work Offline" is the right fit for this scenario. Instead, should reviewers save a local copy to their hard drive, comment on it, and then, when reconnected to the Internet, open the local copy, click Reconnect to Server, and then click Publish Comments?

Thanks, Dave. So for my hypothetical traveling reviewer, it would be reasonable to suggest the following steps for an offline workflow?
1. Connect to the shared review.
2. Choose Work Offline from the Server Status menu.
3. Close and save the review PDF locally.
4. Comment while traveling.
5. When back in the office, open the local copy of the review PDF.
6. Click Reconnect to Server.
7. Click Publish Comments.

In Mac's PAINTR application, what exactly does the "Splash" function do?

n Mac's PAINTR application, what exactly does the "Splash" function do?

You might also post your question over in the Mac App Store section of the Community, where you might have a better chance of running into someone else using the Paintr App.
Mac App Store: Apple Support Communities
Dennis

What exactly does the M7 coprocessor do in the iPad air, and what apps can use it?

I've been trying a few 3rd party apps which use the m7 in the iPhone 5s. None of them work. Also there seem to be no apps both built in motion activity under the privacy menu in settings.
My question is, what exactly does the M7 coprocessor in the ipad air?

http://en.wikipedia.org/wiki/Apple_M7
http://www.imore.com/apple-m7
http://www.tuaw.com/2013/10/10/seven-apps-that-take-advantage-of-the-m7-motion-c oprocessor-in-t/

What exactly does the colaece option do in TOAD software

Hi,
What exactly does the colaece option do in TOAD software.
Regards,
MuruguPandian P

Coalesce will take ADJACENT free space and coalesce it into one larger free chunk.
A free extent in a dictionary-managed tablespace is made up of a collection of contiguous free blocks. When allocating new extents to a tablespace segment, the database uses the free extent closest in size to the required extent. In some cases, when segments are dropped, their extents are deallocated and marked as free, but adjacent free extents are not immediately recombined into larger free extents. The result is fragmentation that makes allocation of larger extents more difficult.
You should often use the ALTER TABLESPACE ... COALESCE statement to manually coalesce any adjacent free extents. To Coalesce a tablespace give the following command
SQL> alter tablespace ica coalesce;
Source: http://www.oracle-dba-online.com/tablespaces_and_datafiles.htm
Regards
Asif Kabir

What features does the Dreamweaver extension Business Catalyst have?

What features does the Dreamweaver extension Business Catalyst have?
I am looking to create an e-commerce website and wonder if the business catalyst extension is useful.

Thank you so much for all your help
Just a few last things:
I have good web-designing abilities and with dreamweaver, but are there any books or extra help on how to create proffesional websites using Dreamweaver CS5.5 - as this is for my business (retail-jewellery) and I want it to be really interactive and user friendly.
Also what are the best adobe suites to create a professional e-commerce website?
Does the After Effects CS5.5 the only adobe software that lets you have moving graphics and text?

HT1657 If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start? Do I have 48 hours from the download date or when I first watch the movie?

If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start? Do I have 48 hours from the download date or when I first watch the movie?

You have 30 days from when you download it, but when you then start watching it you have 48 hours (24 if your account is US based) to finish watching it before it expires.

At what temp does the P4's start to Throttle

Similar Messages

Maybe you are looking for