AT1 field not display in MIGO and J1IEX

Hi Experts,
i am using Secondary higher cess amount it will display AT1 Field wise configured. but i do not get this field in MIGO and J1IEX.
what i am doing
Reg
Kishore

Check Note 926707.It will hopefully solve your issue
Regards,
Indranil

Similar Messages

Excise Invoice Tab is not display in MIGO for Cancelled document

Hi,
We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
As per my understanding the excise tab should come for cancelled doucment also.
Regards
Rajev

Hi,
You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
but it will come for 101
.But it is not coming for 101
can you explain your statement ?
If it is not coming for 101 movement type
check following point
1) tax code in PO ,all excise condition should be there
2) Maintain chapter ID material combination in J1ID
3) Maintain Vendor and Plant excise details in J1ID
Regards
Kailas Ugale

Firefox page images do not display only text and links

New desktop (not this one) with windows 8.1 Pro, Firefox 29, Norton Internet security. When I go to many of the Firefox pages images do not display, only text and links. This is true for the "get add-ons" page. I can search for add-ons, but when I try to install one, the installation fails. Is there a security setting in windows or NIS that is blocking Firefox images and installations? The Firefox installation went smoothly without error. Other sites do not have this problem.

Wow! I never would have thought of that! My time settings were incorrect when I set up the PC, and I thought I set them. I did have the day, date, and time set correctly. But I did not have AM/PM set right. So, I was off by 12 hours. I corrected it and, voila, all works well.
I'm so happy now, because I can now get all the security extensions I've grown to love:
- NoScript
- Ghostery
- Better Privacy
- Adblock Plus
You guys are great! Thank you so much for your help.

Page not displaying in Safari and Internet explorer but showing up in Mozila

Hi,
I bought this pre-made template which I would like to use for my website. When I upload it to my website and try to open the pages like "Contact us", "News", "Team members" and so on, they are not displaying in Safari and Interner Explorer, but they DO show up in Mozilla. Also, the pages I created myself do show up in all browsers. I really need to fix this problem as I already put a lot of effort to create my web site and now it is not working online. I would really appreciate some help. Here is the link to the original template:
www.opremadoma.si
Thanks,
Anne

The tag should read "myself" (no quotes) not "_self".
http://www.apple.com/quicktime/tutorials/embed2.html
For cross OS browser compatibility (and no "embed" tag code) you should consider using javascript:
http://developer.apple.com/internet/ieembedprep.html
With all of my skills I could not get your "hotspot" to open a new html page:
http://www.30fps.com/mov/aboveCristallina02VREn.mov

Service Manager Portal not displaying VM console and related details

Hi All,
We have deployed private cloud with system center products using Cloud Services Process Pack and we have deployed Service Manger portal for VM provisioning in Cloud
The Service Manger portal does not display VM console and VM details
I have following queries
How to take remote console of VM deployed by end user through service manager portal
How will user come to know quota limit utilized in cloud under his account
The VM are deployed through SCSM portal are in shutdown state how to auto start the VM after provisioning
Please help since we are not able to find any solution for the above
Appreciate if any workaround is available for the same
Thanks
Manzoor Ahmed

The component of System Center that is capable to give console access to your VMs, is App Controller.
Once the user are logged in here, they should see their quota, limits and resources available.
Yes, the VMs are powered off by default when using the CSPP. You can edit the runbooks and add a task that will start them after provisioning.
For your information:
Many things has changed since the release of Cloud Service Process Pack. A new set of tools are provided with Windows Azure Pack to have a streamlined Infrastructure as a Service offering within the enterprise. Windows Azure Pack will leverage VMM (in the
same way as SCSM does) but in conjunction with SPF (component within Orchestrator) to give you a framework that is identical to Windows Azure (Microsoft's own cloud) running on-premise.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

"File Path and Name" field not displaying correctly

Post Author: DaveWoo
CA Forum: General
Hello,Here's my situation: I'm currently upgrading from Crystal Reports for Visual Studio .NET 2003 to Crystal Reports for Visual Studio 2005. I have several reports (programmatically generated using VB.NET) that use the "File Path and Name" special field. Now, in the old version of Crystal Reports (2003), the field properly displayed the original file path and name; however, in the new version (2005), the field displays as "C:\DOCUME1\Username\LOCALS1\Temp\Filename{F2459406-3719-4C8B-917C-4A7055A18C76}.tmp" - in other words, the location of the temporary .rpt file.How do I get the "File Path and Name" field to correctly display the path & name of the original file, like it did in the prior version?- Dave

This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
Ludek

Mail merge fields not displaying properly - Dollar signs and percentages

Hi folks,
I don't know much about mail merging, so I have a question. I have most things working on my merge, but need help with a couple of minor items (I hope). I have an Excel 2010 spreadsheet that we use for merging to a Word 2010 document.
It has various fields such as name, address, city, etc. It also has a field for a dollar amount formatted to two decimal places and showing the $ sign in Excel (ex. $67,000.00), but when it gets merged into the Word document, it displays as 67000.
It doesn't pull the $ nor the decimal point and cents.
I also have the same thing with a percentage (Ex. 6.00%), displays in the Word document as .006.
I think I have everything else working, but can't figure out how to format these items in the Word document to display properly. Any advice?
Mike

If you insert the fields
{ MERGEFIELD Total_NB_Premium_away_from_Plan }
and
{ MERGEFIELD Total_Premium_of_Team_Sales_Target }
directly in your mail merge main document, outside an IF field, not nested in an { = } field, with no formatting switches, what results do you see?
Word will only apply a numeric format to things that it decides are numeric (broadly speaking, that includes numeric and currency amounts that it can recognise). It will leave anything else unformatted. So if you have something that looks a bit like a number
like "$-164,209.00", the chances are that Word will leave it exactly as it is.
When Word does not recognise something as being a number or a valid numeric expression, it will generally display one error or another when you try to put it in an { = } field. So, e.g.
{ =$-164,209.00 } would give you the syntax error that you are seeing. (Assuming "$" is set up as the currency symbol in your COntrol Panel's regional options. If the regional currency symbol was £, you would see a different syntax error.)
The problem in this case probably originates in something that has happened in Excel. Normally, things that are numeric/currency in Excel come through as things that Word treats as numeric. But if for example, someone has entered a number formatted as text
in a column that has texts rather than numbers above it, Word may receive something that it does not think is numeric. You may have to fix your sheet before Word will "see" the numbers correctly.
When you have got to the point where WOrd sees the numbers correctly, you should be able to use
{ MERGEFIELD
Total_NB_Premium_away_from_Plan} \#$,0.00 }
(and the negative numbering formats if you want) without nesting the { MERGEFIELD } inside an { = }
Peter Jamieson

J1IJ SeCess field not displayed

Dear All,
Issue is regarding the Depot Excise Invoice J1IJ.
Unable to get the SHe Cess in VF01 for Depot Invoice. However, J1IJ been created w.r.t Respective Delivery document no. & Parent Invoice (J1IIN). In the initial screen of J1IJ I am able to view the SHe Cess as TAX1, but in the detailed screen SHe Cess column is not displayed. May be due to this reason its not fetched to VF01.
Similarly, in MIGO initially SHe Cess was not captured, but after activating it in Program SAPLJ1IEXGM and Screen 0220 could able to achive at MIGO level. Now the same is occurred at J1IJ transaction.
Inputs will be of great help and request you to revert at the earliest.
Thanks n regards,
Vijayashree

Dear All,
Issue is solved. this was due to condition type JA1X not been maintained in tax procedure to AT1 condition in Tax on Goods movement option in IMG.
Thanks n regards,
Vijayashree

Master-detail: detail field not displayed after changed by master field

I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team

KOMK Fields not displaying values in sales order.

Hi all,
I have created an additional tab for VA01,02 and 03. I have added fields from VBAP table and KOMK structure.
Now fields added from KOMK structure are displaying empty fields(no value). The fields areVAT REG NO (KOMK-stceg) and Tax Code (KONP-MWSK1).
i have added fields with same name, so i have not coded anything. Do i need to code something for these fields?
Please suggest the possible solution.
Thanks in advance for your suggestions.
Regards,
NarsiReddy cheruku.

Hi Edgar Soares,
Thanks for your reply,
Yes you are right, i am using BADI_SLS_ITEM_SCR_CUS.
now i have added KNA1-STCEG to screen and in PBO module i coded as follows.
(In top include i declared Tables kna1 and Tables VBAK.)
data vat type kna1-stceg.
data wa type kna1.
SELECT SINGLE * from kna1 INTO wa.
vat = wa-stceg.
But it is not displaying Vat reg num on screen only displaying empty field.
Please suggest where i went wrong.
Thanks & Regards,
NarsiReddy Cheruku.

Custom fields not display in SRM5.5 Basic Data Frame

Hello Everybody,
      I am working on SRM5.5 Server which i have to add two custom fields in Basic Data Frame..
     No field is display in basic data frame After I added those fields in INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF.
    I added these fields by help of 672960 OSS notes..
   Add also when i execute the program BBP_DYNPROS_GENERATE where I entered the program name as SAPLBBP_PDH_CUF and execute but non of them is working fine..
Is there anything else do i need to display custom fields in basic data frame??
I have one more question..
When you logon through SAPGUI and goto BBPSC01 t.code where you see lots of fields in basic data frame such as unloading point and all.. But those all fields does not display when you logon through WebURL..
I checked is there any BAdi such CUF or Screenvarient or some Badi has been actived but non of the Badi has been implemented..
To display all the fields which are display in GUI Mode also should display in URL..
To bring this functionality , What do i need to do?
I appreciate if you answer these questions..
Thanks,
John.

Hi Disha,
We are trying to add custom fields to the Shopping Cart Header. We are using SRM 5.0. We added the fields to the structures "INCL_EEW_PD_HEADER_CSF_SC" & "INCL_EEW_PD_HEADER_CSF". We are able to see the custom fields. But the issue is , we are able to see the custom fields in the Shopping Cart one step shop scenario. Whereas when we run the wizard which is a 3 step scenario, we are not able to see the custom fields.
Technically speaking, the custom fields are visible for the ITS BBPSC01 & BBPSC03 , where as these custom fields are not visible for the ITS BBPSC02.
Please let me know, if we need to append the fields to some other structure to be able to see them in the Shopping cart wizard also.
I will be gald to provide any kind of info.
Thanks in advance...

Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.

Dear All,
Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents.
I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541
and after that i have created a Subcontracting Challan with the reference of the above created transfer posting
material document.
Now i need the Sub contracting challan number to be displayed in the Excise Tab of the transfer posting material document.
But if i display the Transfer posting material document in MIGO, the Excise Tab is not getting displayed.
Kindly help on this so that i can view the Sub contracting challan number in the display of the respective Trasfer posting material document in MIGO.
Thanks & Regards.

Pls confirm if you are following the SC process sequence :
u2022     Creation of Subcontracting PO, here in conditions tab maintain the price (Subcontracting charge) (ME21N)
u2022     Transfer Posting of Components to Subcontractor ( Movmt Type - 541) (MB1B/ME2O/MIGO)
u2022     Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01) - This challan will have the details normally company needs, in case client need more ... ABAPer have to develop customized smart form
u2022     Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
u2022     Reconciliation of Subcontracting Challan (J1IFQ)
u2022     Completion of Subcontracting Challan (J1IF13)
u2022     Generation of Annexure IV (J1IFR

Excise Tab not display in MIGO

Hi,
I had prepare import PO mentioning all custom duty (CVD),
While doing MIGO, excise tab is not displaying it in.
Please help me, its urgent matter
thank's in advance
Parag Lute

Hi,
It means Manufacturing plant setting is not done in SPRO and DC plants have been configured.
Follow following Menu path
SPRO> Logistics General> Tax On Goods movement> India> basic Settings-->Maintain Plant settings
Enter manufacturing plants here and delete the DC plants existing over there.
Reward if helpful

Maintenance View - Fields not Displaying

Hi experts,
I created a Maintenance View for a table. But when i go and see in the Maintenance View Overview, the integer field-columns in the table are not displayed in the view.
can u ppl suggest me why this happens? whether maintenance view will not support integer fields ? And how to over come this problem.
with regards ,
James...
Valuable answers will be rewarded...

the problem might be you used two screens while creating table maintaince.
so use one screen in table maintaince then you will get everything.
even now you will get all fields ,just double click on one column,it will give detailed,there you can see the all the fields.
Thanks
Seshu

"Define query parameters" popup in Dataset properties - Refersh field, not displayed for Sps in SSDT 2010 (Works fine in BIDS)

When we upgraded our SSRs projects to 2012, we are facing an issue in Data tools environment.
When we click REFRESH FIELDS button in Dataset properties, With query type as SP (For all our sps), the "Define query parameters" popup is not displayed.
When we checked the SQL Profiler for queries executed at back end , NULL values are used for parameters.
But when we Used the QUERY DESIGNER button, and clicked execute for sp, the popup comes.
For User defined Functions, the Popup comes correctly.
In BIDS, still we can open the RDLs and do the operations correctly
Please advice

Dear Wendy Fu
My Scenario is different.
In Query Designer, Every thing is fine (Parameter Popup is coming, and fields are populated under data set)
But what we need to do is
1, Select Query Type As SP
2, Select the required SP
3, Click Refresh Button
4, A "Define
query parameters" window popsup
5, Provide values and click Ok
6, Fields will be populated under the dataset
The issue we face is that, we are not getting the Define query parameters popup,
Hence NULL values are passed to execute the sp, to retrieve the fields set.
The Work around we are using now is editing the sp, and use
set @Parameter = Value
for each parameters in sp, and then we get the fields populated under dataset, when we click refresh.
The issue exists in both MSDT for
Visual studio 2010 & MSDT for Visual studio 2012.
But every thing is fine in BIDS with VS 2008 Shell for the same RDL

AT1 field not display in MIGO and J1IEX

Similar Messages

Maybe you are looking for