AT300SE - Connect to TV using MHL micro usb to hdmi adapt

Hi,
I recently received the Toshiba Tablet AT300SE. This newer tablet no longer has the HMDI connection port. However it has the micro USB. My question is, can I use this micro USB to connect to my TV using the micro a USB to HDMI adapter?
Has anyone ever done this and made it work?
Thanks,
Nick

Here an interesting info from Toshiba:
+Do the AT100, AT200, AT270, AT300 and AT300SE tablets support Mobile High-Definition Link (MHL)?+
http://aps2.toshiba-tro.de/kb0/FAQ3103FV0000R01.htm
The AT100, AT200, AT270, AT300 and AT300SE tablets *do not* support Mobile High-Definition Link (MHL).

Similar Messages

Micro USB to HDMI adapter support on Encore 2 WT8-B-102

I would like to know, if there is any chance to connect this tablet to TV/Monitor through the micro usb port by attaching a micro usb to HDMI adapter? If yes, is there any specific adapter being compatible with this Tablet device?
Thanks for the support
Alex

First of all it’s not possible to use USB port (micro USB) in order to output the video signal. The USB port does not support such functionality.
According to the tablet's specification page the WT8-B does not support video out interface (HDMI etc..) and therefore it's not possible to connect it directly to the TV device.

Connecting Micro USB and HDMI cables at the same time

I need to be able to use a Micro USB and HDMI cable at the same time to configure ATV to connect to WPA2-Enterprise secure WiFi network. I'm using Apple Configurator to do this. Because of the poor hardware design, it isn't possible to connect both the Micro USB and HDMI cables at the same time. Does anyone have a worrkaround to resolving this issue?
I saw a similar post about this problem in the forums dating back to April 2013 with no real solution. It's been over a year now and I'm hoping someone has found a workaround to this problem. I have a bunch of ATVs that I need to configure for our classrooms.
Thanks!
MG

For what reason do you believe this is necessary?
How to Install a Configuration Profile: http://support.apple.com/kb/ht5437

AT300se...can I connect to TV via the micro USB port?

Hi, I was wondering if I can connect to my TV using the micro USB port on the AT300SE model tablet. This version does not ahve the micro HMDi port so i was wondering if I could use an adapter to conenct to my TV via the micro USB? Thanks, Nikos
Solved!
Go to Solution.

Looking at the specs, this tablet does not have HDMI. So I see no way you can connect it to your TV. Some of the newer TV's may be able so share your network to play files that are on your tablet.

(iPhone4) 30 pin female connector to micro USB male connector adapter

Is there such a thing as a (iPhone4) 30 pin female connector to micro USB male connector adapter, which can transfer audio / music?
My car audio system has a 30 pin male connector for my iPhone4. Would like to use my Android phone as well.

Google it if nothing shows ,it doesn't exist

Micro usb to lightning adapter works in IOS7??

There are plenty of discussion flowing around saying that IOS7 doesn't support 3rd party cable.
However, I have couple of devices that uses micro USB cables and I am thinking about getting the micro usb to lightning adapter (official apple one).
Does anyone know if the micro usb to lightning adapter (official apple one) works with iphone5s with IOS7 on ANY micro usb cable?
Thanks in advance!

I saw the reviews saying it works (they guy bought it in Dec 2013), however, I confirmed that mine APPLE-branded micro USB to lightning adapter doesn't work after I replaced my iphone5 with iphone5s (build-in iOS7). I bought it from apple store on Nov 2012. Going to check with apple store.

Micro usb to lightning adapter on ios7

There are plenty of discussion flowing around saying that IOS7 doesn't support 3rd party cable. However, I have a micro USB cable and I am thinking to buy the micro usb to lightning adapter (official apple one). Will it work on IOS7 without displaying the mesage whcih it does when we use a 3rd party cable?

I confirmed that mine official micro USB to lightning adapter doesn't work (see the unsupported message) after I upgrade to iphone5s (build-in iOS7). I bought it from apple store on Nov 2012. Going to check with apple store.

USB to HDMI adapter for external display in clamshell mode?

Hello.
Does anyone know of a USB to HDMI (or DVI) adapter so that I can connect an external display (with an HDMI or DVI cable) to a USB port on my Macbook air?
I need to run it in clamshell mode, mirroring the Air display. The Monoprice USB to HDMI adapter (which uses DislplayLink drivers) I tried does not work properly in clamshell mode with mirroring (though it works in arrangement mode). I know I can use the Thunderbolt port, but I need to leave this free for a Firewire device.
Thanks.

Unfortunately, I have the same problem, but using USB devices and Displaylink software. I know there are issues with Displaylink software as they say the problem is with Apple. I have three external monitors with a late 2008 I Macbook Pro which gives me four screens. I was able to get two to work + the Macbook, but there were so many issues, like you described, that I have given up and I am just using the Mini Display port which gives me one external and the Macbook. Looks like we will just have to wait until Apple does something. I have found no other solutions at this point - hardware or otherwise.

Triple monitor with intel and SenseVision Club 3d usb to hdmi adapter

Hi,
I have an all in one machine with a single intel VGA:
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
I also have an external monitor which works fine. I would like to use a third monitor through the SenseVision Club 3d usb to hdmi adapter (Chipset: DL-195).
http://www.club-3d.com/index.php/produc … apter.html
I'm using the udlfb module with the option: fb_defio=1
The monitor attached to the usb to hdmi adapter turns green when the machine starts.
The problem is that I'm able to use only one adapter at the time. So I can use the integrated monitor and the external one attached to the intel VGA or the monitor attached to the usb to hdmi adapter but not all of them together.
Here is my xorg.conf:
Section "Device"
Identifier "intel"
Driver "intel"
# BusID "PCI:0:2:0"
EndSection
Section "Device"
Identifier "dl1"
Driver "fbdev"
# BusID "PCI:0:3:0"
Option "fbdev" "/dev/fb1"
EndSection
Section "Monitor"
Identifier "monitor0"
EndSection
Section "Monitor"
Identifier "monitor1"
EndSection
Section "Monitor"
Identifier "monitor2"
EndSection
Section "Screen"
Identifier "screen0"
Device "dl1"
Monitor "monitor0"
#DefaultDepth 16
#DefaultDepth 24
EndSection
Section "Screen"
Identifier "screen1"
Device "intel"
Monitor "monitor1"
#DefaultDepth 16
DefaultDepth 24
EndSection
Section "Screen"
Identifier "screen2"
Device "intel"
Monitor "monitor2"
#DefaultDepth 16
DefaultDepth 24
EndSection
Section "ServerLayout"
Identifier "multihead"
Screen 0 "screen0" 0 0
Screen 1 "screen0" LeftOf "screen1"
Screen 2 "screen1" LeftOf "screen2"
Option "Xinerama" "on"
EndSection
Switching the screen0 and screen1 positions in the xorg.conf makes work the intel vga. The current configuration enables only the usb monitor. The screen2 is discarded by the xorg stating that none monitor is attached to the device.
I also tried to tinker with the BusID values. Specifying BusID "USB" makes the xorg crash.
Is it possible at all to use three monitors at the time with the current state of art? Any success story with this setting?
Could you please share your working xorg.conf if you have any?
Any suggestion?
Thank you very much.
Last edited by ArchArael (2013-02-28 09:52:05)

Apparently yes,
According to the thread:
To restore to the old behaviour, put this in your ~/.drirc:
<driconf>
<device screen="0" driver="i915">
<application name="Default">
<option name="vblank_mode" value="0" />
</application>
</device>
</driconf>
But I don't come back to the same perfs as before (tested with eternal lands).
I noticed that in my /var/log/Xorg.0.log:
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00020202 to 0x00020000
(WW) intel(0): PIPEBSTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VBLANK_INT_ENABLE
There seem to be some problem with mtrr
I found this problem which seems related but I only have 2GB of memory
Last edited by sebcactus (2008-11-30 21:20:22)

I have a macbook pro 5,3 white I am trying to hook up to a samsung hdtv. I have used a mini dv to hdmi adapter but I get no sound on my tv. What can I do to get sound?

I have a macbook pro 5,3 white I am trying to hook up to a samsung hdtv. I have used a mini dv to hdmi adapter but I get no sound on my tv. What can I do to get sound?

The Mini DisplayPort-to-HDMI adaptor will only pass video in most cases. You will need to run a separate audio cable along with it. Likely a 3.5mm (male-to-male) cable. Or a 3.5mm (male) to red/white RCA (male) cable. Just depends on what audio input ports your TV has dedicated to the HDMI input.

External monitor will not sleep using 2012 MacBook Air and HDMI adapter

I am running a HP 27xi (27" display) using the apple thunderbolt to HDMI adapter, and using a HDMI cable.
ISSUE:
I run my 2012 macbook air in "clamshell mode", and solely use the 27" display, which works great. Problem, is when the macbook goes to put the display to sleep, or sleep for the laptop, the display starts to go into power save mode, then flips back on... goes back into power save mode, repeats forever. I called HP, and they said the HDMI signal is not being turned off, hence why the screen keeps going ON, then power save, then repeat. If I shutdown the laptop, then the monitor goes off just fine.
Anyone else ran into an issue with an external monitor NOT going to sleep when plugged into the HDMI adapter? Someone suggusted that I purchase a DVI-D adapter, and use that cable... but that sounds ridiculous. The HDMI adapter should absolutely work.
My temporary fix is to turn off the monitor everytime (if i remember) otherwise the display is in this never ending loop of trying to shut down.
And yes, the Macbook Air is 100% up to date with updates. DRIVING ME CRAZY!!!
Joe

Hello Joe,
I definitely understand your concern regarding your external display not going to sleep and endlessly looping into power save mode when your MacBook Air is asleep.
I found an article with steps to troubleshoot issues with displays. This article is for internal and external displays, so you can skip any steps referring to the internal display. The following steps specifically stands out to me for the situation you are experiencing:
Reset the system
You can reset the Mac's parameter RAM and SMC.
You can find the full article here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thank you for using Apple Support Communities.
Best,
Sheila M.

Displayport /USB to HDMI adapter compatibility under the Bootcamp

I read that the Displayport/ USB to HDMI adapter works well with Apple but has anyone tested within Windows environment under Bootcamp? Are there drivers that support the adapter already?

Usually, A *[USB to HDMI Adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in MacBook/Windows OS.. You just need to download the usb display adapter driver.. But i have on idea that a *[usb hdmi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in Bootcamp. Maybe it's OK.

Displayport/ USB to HDMI adapter within Windows 7 under the Bootcamp

I read that the Displayport/ USB to HDMI adapter works well with Apple but has anyone tested it within Windows 7 under Bootcamp? Are there drivers that support the adapter already?

Usually, A *[USB to HDMI Adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in MacBook/Windows OS.. You just need to download the usb display adapter driver.. But i have on idea that a *[usb hdmi adapter|http://www.espow.com/wholesale-usb-multi-display-adapter-for-computer-a dd-on-a-second-monitor.html]* can work in Bootcamp. Maybe it's OK.

HT1600 at the end of a recent apple tv update, a picture appeared suggesting a connection using a micro usb connection to i believe Itunes. the apple tv did not come with a micro usb connection. What to do.

At the end of a recent apple tv update, a picture appeared showing a connection - micro usb - to apple itunes. I don't have this micro connection. I now can't watch apple tv. what is going on?

Many newer cameras have the Micro USB cable you can use.
Otherwise, you will need to buy one to restore your Apple TV.

Charging connection from tablet stuck in micro usb port

hello this problem, that many appear to have, i need a response if anyone has found a solution to getting pictures off of the tablet. Help Please

Hey @kaussie ,
Welcome to the HP forums.
I understand your tablet has the micro-USB cable stuck in the micro-USB port.
Does your tablet still have enough power to back up your data onto an micro-SD card? You can also transfer files via network storage with apps like ES File Manager, if you have a network drive or shared folder on your network. You can also use cloud storage options like Dropbox.
If your tablet does not boot up, the only recoverable data would be what is on the micro-SD card.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

AT300SE - Connect to TV using MHL micro usb to hdmi adapt

Similar Messages

Maybe you are looking for