AT300SE working with Internet stick via USB?

Usually, I go online with my Tablet AT300SE when logged in to a WiFi-Network. For the rare cases where there's no WiFi available, I'd like to go online via a USB-Internet-Stick (AT300SE supports USB host-functionality, cable mini-USB <-> USB A exists). I got a stick Huawei173 (configured and working without problem on an old WIN XP Notebook) which is told to work with Android devices, too. My Android 4.1.1 "settings" shows WLAN and Bluetooth, but does not detect the Huawei-Stick.
Should I use another stick? Is this a problem of my Android-Version? Does it work at all?
Thanx a lot for helping me, best regards
Knobelix

In my opinion such stick would not work but its my personal opinion.
I guess the usage of external 3G USB sticks is not supported and such external UMTS sticks are not compatible
However, please report your results (if you have tested any other sticks)

Similar Messages

Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet??

Getting this messg on Factime "could not sign in, check your network connection", but I have Wifi activated and working with internet?? what can I do?

Usually it's because you are not making internet connection via wifi. Open Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Why does my Web Handler work with Internet Explorer, but not with Firefox

I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
var WebHandler = "Example.xml"
tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
/GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
that returns the XML that it is supposed to.
I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
Thank you, Robert.

Problem solved. The issue: Content Type was not correct.
Visual Studio creates the web handler with dummy code like this: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
context.Response.ContentType = "text/plain"
context.Response.Write("Hello World")
End Sub
I wrote a database query that set a string variable to the XML I wanted: -
Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
Dim Outstring as string
' my logic to fill Outstring with XML
context.Response.ContentType = "text/plain"
context.Response.Write(Outstring)
End Sub
This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
context.Response.ContentType = "text/plain"
should be
context.Response.ContentType = "text/xml"
It now works with IE, FF, and Chrome, and presumably all others.

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

My Google search autocomplete me in Firefox does not work anymore. However, it still works with Internet Explorer. How can I fix this so Google gives me search suggestions again?

My Google search autocomplete me in Firefox does not work anymore. However, it still works with Internet Explorer. How can I fix this so Google gives me search suggestions again?

Solution update: Disabled XULRunner 1.9.1 extension from Add-ons > Extensions. Problem solved.

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

What's the product name please?

Working with internet explorer

I know mac no longer supports internet explorer. I need to access applications from my place of employment at home that apparently only work with internet explorer.
I can partially access the website using firefox, safari, netscape,and the latest internet explorer for macs (5.2), but can't do anything with it. The IT guy at my place of employment tried to help me configure the internet explorer, but says it's old & he couldn't do it. Am I out of luck?

Just a question: is your work computer a PC? If it is, I recommend biting the bullet and signing up for "Go to My PC" if you haven't already. I assume if you're a Mac user you probably have broadband internet at home and at work. If you use GTMPC you can operate your PC right from your home Mac, and process your stuff from home, save it on your work PC, and you're good to go! It's only $19.95 a month for unlimited usage; $14.95 a month if you sign up and pay for a whole year. It works great - it basically uses your browser at home to extend your home keyboard to your work PC. Your work PC does all the work, not your Mac - but you get to watch. It's as much fun as PC computing can be!

IPhone 5c not working with internet apps such as tumblr and instagram?

We had a tiny router issue for a couple minutes but got it working quickly. Then my iPhone simply stopped working with internet apps as i said in the title. It says it has 3 bars of wifi, i tried data, restarted it, tried everthing but it wont work. Please help

Nevermind I got it fixed.

Working with remote site via FTP - getting html only

I''m using DW to remotely work with the website via FTP. Is
it possible to make it NOT download all the assosiated files with
the html, that I'm edtiting? I switched on the prompts in getting
and putting stuff, but it still tries to download or upload
additional stuff. I need it to deal only with html.
Thanks for any clues.

> It works good, it is just disturbing, that it is trying
to upload
> everything
> besides pages.
Works good? Make one silly mistake and you are toast.
Use a version control system instead. DW has a primitive one
in
Checkin/Checkout, but it may be all you need.
I would NEVER do what you are doing in a multi-user
environment....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"simterra" <[email protected]> wrote in
message
news:fpki1l$2ci$[email protected]..
> hmm, because several people work with my site on the
same documents, it
> generates a mess if they deal with editing local pages
and uploading them
> to
> the server. Working directly with pages from the server
solve this
> problem -
> they're always getting the last version (given that time
they work with
> them is
> largely different).
>
> It works good, it is just disturbing, that it is trying
to upload
> everything
> besides pages.
>

Problems with sharing internet connection via usb

I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
PS I have unliited cellular data and iPhone is my only internet connection at home,

Mark,
There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
If I remember correctly (book is on loan)
1: System Preferences>Network>Show>network port configurations (click unlock)
2: Click>Built in Firewire and drag to the top of the list (why I forget why)
3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
anyway play with it, you'll figure it out. if someone doesn't get to you.

IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0

Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).

I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks

Samsung Fascinate, problems with playing music via USB port on car stereo

Before the update, I could play the music files on my Fascinate via the USB port on my Kenwood stereo, and control basic functions such as skip, pause etc. Now, my stereo does not recognize the device, and cannot read the files. I went to local Verizon store where a sales rep tried to connect it in here new Kia Soul and it didn't recognize the device either. It will play via the AUX jack, but I lose player control and the phone does not charge via the AUX cable. She did a hard reset which did not resolve the problem. We tried one of the other employee's Fascinate in my car, which did not work either.
So, after hoping to be able to stream music via Pandora, Jango etc thru the USB port after the update, now it seems its primary function is for charging.
Also, the ALL SHARE function, which I used to get the music on my phone originally, does not work now.
Anyone else have this issue with music player and USB connection?

txgopher- I have personally never used my Fascinate to listen to music via USB via stereo however, I can see why it would be frustrating for you to no longer be able to do so when it was never an issue prior to the update.
It sounds as though you and the store rep already did some troubleshooting by trying to duplicate the problem with another car, stereo and even doing the final troubleshooting step which is a master reset.
Since you have done all of the necessary troubleshooting steps to no avail, it most definitely appears as though the software update has interfered with that USB connection in some way.
What I have done is forwarded the information you have provided to Samsung in order for them to look into this concern as well as come up with a way to get this resolved.
Please stay tuned because as soon as we hear back from Samsung we will be sure to update this forum with the results/findings.

Contacts created on iPhone won't sync with exchange, only via USB

When I create a new contact on my iPhone from within the phone app, it doesn't get synced to my exchange server, in fact it doesn't show up anywhere in the contacts app or under contacts in the phone app. If I create a new contact from the contacts app it only allows me to create it in my exchange contacts folder but it does sync properly. When I create a contact from within the phone app I am not given a choice of group at all and unless I have a recent call from that contact, it is nowhere to be found on my phone or computer. So the question is how do I get new contacts created on my phone from within the phone app to sync with exchange? The only way I have been able to sync contacts created within the phone app thus far has been with iTunes via USB which works fine but I want to sync contacts bidirectionally via exchange ota.
Thanks for any help

I have more information to share.
When you launch the Contacts app on the iPhone, hit the "Groups" button in the top left. What I see on that page are these 3 sections:
All Contacts >
From My Mac
All From My Mac >
Group A >
Group B >
Group C >
etc
Foobar (Exchange)
Foobar Global Address List >
After many hours of trial and error, I have come to the understanding that the iPhone Contacts app has potentially multiple data stores which seem to correspond to each sync source configured (eg AddressBook, Exchange, etc.) Refering to my example above, I have enabled Contacts syncing with my AddressBook (via iTunes) and an Exchange mail account, so my iPhone shows 2 separate sections with the generic "All Contacts" appearing as the first section at the top.
Entering the contact listings page via the "All Contacts" button will show an integrated list of contacts from all sync sources (in my case, two: contacts from AddressBook on my Mac and contacts from my Foobar Exchange account).
If you click the "+" button to add a new contact when you have entered the listing page via "All Contacts", it seems the record is only stored on the iPhone and does NOT get sync'd. Specifically, it does not get synced to the Mac AddressBook nor to the Exchange account.
However, if you have entered the listings page via any group in the "From My Mac" section or "Foobar (Exchange)" section, and create a new contact via the "+" button there, that contact DOES get sync'd to the appropriate sync source (AddressBook or Exchange in my case).
Furthermore, if you enter the listings page via a specific group in the "From My Mac" section (eg "Group A") and create a new contact from in there, it will appear in "Group A" in AddressBook after sync. If you enter the listings page via the generic "All From My Mac" button, then the new contact will be added to whatever group you have specified in iTunes (under the iPhone Info tab etc. as mentioned in the prior post).
All up, I guess, there may not be a bug here after all. I must simply always remember to add new contacts when I am in the "All From My Mac" section, if I want them to be synced to my Mac.
However, I do think that it's a confusing and poor user experience (and may lead to loss of data) if you add new contacts from the generic "All Contacts" entry point, because they will NOT be synced as you'd expect them to. I am guessing this also might only happen when you have multiple sync sources defined, simply because the app doesn't know which sync source to associate them with: AddressBook or Exchange? But, at the point of adding that new contact, the app should prompt you for the sync source to use, or at least WARN you that your contact is going to be an orphan record solely residing forever more on your iPhone. If you ever reset your iPhone those contact records would be lost forever.

Internet sharing via usb

I use my iphone as a modem and its been working until i got the new iphone 5.
Now, i can't use the phone as a modem via usb. My computer cant find the phone as a modem, but itunes and iphoto starts up as usual so theres nothing wrong with the usb-gate.
i can surf with wifi without problem, but dont like to do that because all the battery that goes away. I really like to be able to surf via usb.
whats wrong?
i tried to restart the phone and the computer several times.
sorry for the poor english :-P

Short answer: no.
It is possible via bluetooth using a piece of software called GnuBOX, but it is far from trivial to set up. And now that I think of it, GnuBOX was for S60v3 so I'm not sure it'll work on an S60v5 device such as the 5800.
Going WiFi will save you alot of trouble further down the line.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

AT300SE working with Internet stick via USB?

Similar Messages

Maybe you are looking for