ATA-186 can be registered with CUCM v10.5

Hello guys ;
Please confirm me that ATA-186 can work with CUCM v10.5 ? .
Regards;
Shib

Loaded the latest firmware into CM, then manually on ATA firmware using this process as CM didn't change it:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/186_188/3_0/english/administration/guide/sccp/sccp3_0/sccpaapc.html#wp1011450
I followed this link from another post regarding ASA not registering for an older issue.
http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/3_0/english/administration/guide/sccp/sccpaape.html#wpxref59054
Follow the part that mentions setting the SID0 & SID1 to "." no quotes. I did this and my ATA registered to CM. Screen caps attached.
I have a Cisco ATA 186 running on 10.5.1 and it shows to be registered. I can make calls on it. Not sure how it will do for faxes. HTH Please rate.

Similar Messages

How many devices can you register with a personal dev account

can anyone tell me how many udids can i register with a personal account as i have a team of testers i would like to add , would i need a company dev account for this thanks or will my personal one be ok for this

Still the same. Maximum 100 per year for testing. Individual Developer Account, person or company.
Enterprise Account is for distribution to employees, not via the App Store.

Can CUBE register with two CUCM clusters?

We have two CUCM clusters - one is in US and one is in Australia. Currently CUBE is registered with US Cluster with the settings below -
sccp local GigabitEthernet0/0
sccp ccm 10.10.1.21 identifier 2 priority 2 version 7.0
sccp ccm 10.10.1.20 identifier 1 priority 1 version 7.0
sccp
Now we need CUBE to communicate with Australia CUCM. Should we set sccp up for Australia CUCM cluster (version 6.0)?
Thanks,
Jessica Wang

I think you are refering to registering media termination points / transcoders on the same router to two different CUCM clusters, correct?
If yes, we can do it by creating separate sccp ccm groups.
Example :
sccp ccm identifier 1 version 7.0
sccp ccm identifier 2 version 7.0
sccp ccm identifier 3 version 7.0
sccp ccm identifier 4 version 7.0
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 1 register Transcoder1
sccp ccm group 2
associate ccm 3 priority 1
associate ccm 4 priority 2
associate profile 2 register Transcoder2
dspfarm profile 1 transcode
codec g729r8
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 5
associate application SCCP
dspfarm profile 2 transcode
codec g729r8
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 5
associate application SCCP
Arun

Cisco Jabber for Mac 9.2.1: slow to register with CUCM

Hi,
We have this specific problem on our Jabber for Mac 9.2.1 client only: the client takes 60 to 70 seconds to connect to CUCM (running 8.6.2) when it starts.
After Jabber registers with CUCM, there is no issue, it's just very slow to register.
Anybody getting the same behaviour? We have no such issue on previous versions of Jabber for Mac version 8 or Jabber for Windows version 9.
Thanks,
Fabrice

For those interested, I have the answer to my own question: if one of your configured DNS servers is not responding, Jabber 9.2.1 will delay registration to the phone services. This behaviour is seen only in this specifc version of Jabber, hopefully it will be fixed in the next release. Watch out if one of your DNS server goes offilne.
Fabrice

Can not register with verizon

I have a new verizon wireless internet service. I can not register to view my bill because I need a cell phone number and I do not have a verizon cell phone. How can I pay my bill? I have emailed verizon about this problem and never received a reply, so don't know what to do now, I sure don't want my bill to be late. Thanks for any help you can give me.

Hi my name is Leslie. Broadband cards come with a 10 digit mobile number it is located on bill or on receipt when account opened. To complete registration will need to have device plugged in and your VZ Access Manager up. If you are using windows there is a "TXT" option to click on to receive temporary password. When you have 10 digit mobile number click on Forgot password on sign in page on www.vzw.com . Next page will ask for 10 digit mobile number, then will request for you to send temporary password.

Can LAP1242s register with DNS?

We have a need for some 1242s that are connected to a controller to be pingable by DNS name.
Is it possible to get the APs to register with DNS when they get an IP address? I don't recall seeing it as an option - if it can how do I do it?
Thanks in advance

Thanks, Robert.
The scenario is that we have some APs that we want to move from site to site for training. We will prime them for the WLC, but let DHCP allocate the IP addresses.
Just want an easy way to find them.

Client Can't register with inContext

I am having a frustrated client: [email protected] trying to register to edit there site.
When i sent him the invitation he said he never got it. I deleted him, added him again and clicked on copy me on the invitation. I then forwarded him the invitation and he has had no luck registering. It is telling him that there is an account already with that email.
Please help, i really don't like giving our clients the runaround on this, i also haven't received a confirmation email from adobe for his account.
Thanks in advance! Marcus

I have also verified that our client is getting the email verification from adobe. However, once it says congratulations, it is saying to login. Once he does that, it says you aren't a registered user.
here is the email below........
Hello,
To verify your use of this e-mail address [email protected] with InContextEditing.com, please click on the below link.
https://incontextediting.adobe.com/services/redirect.php?url=1ab2babf8bdd7daf71551ccf6c924 4dab17b21f9&ev=2J513FWQFJJB6AA44ZZK67K07R
If you cannot access the link above, please copy and paste the link into your browser.
If you are not currently registered with Adobe InContext Editing, please disregard this message.
Sincerely,
The Adobe InContext Editing team
http://incontextediting.adobe.com

Hey.i would like to know who can i register with my ipod touch warranty?

hey.i would like to know whether i need to register with my ipod touch warranty?if yes.please guide me.thanks;)

Try working through the steps in this Knowledge Base article and see if that doesn't help...this assumes you are using a PC but would be similar for a Mac.

Remote C2901 MGCP gateway won't register with CUCM

Hi, all,
We have a central call manager, we are setting up a remote office with a C2901 voice gateway that has a T1 PRI, this gateway is being configured as a H.323 gateway, everything worked fine. Now I want to get SRST working such that when WAN goes down, employees can still make outbound calls and take inbound calls. I followed SRST documentations when configuring CUCM and C2901, I would say the documentations are clear and easy to follow -- only thing is there is no adequate explanation of why those commands need to be there and I can not get SRST to work.
1), First, a basic concept question, why do we need to configure "ccm-manager fallback-mgcp"? or any MGCP related configuration on C2901? how does MGCP play the role in SRST? the router is configured as a simple voice gateway, when WAN is intact, we use H.323 protocol, when WAN goes down, we still don't need MGCP ...
2), Assuming that we needed all those SRST related MGCP configuration, I would expect C2901 to register to call manager, but I could not get this device to register as a MGCP gateway, debug mgcp packets shows:
*Sep 5 16:52:47.571: MGCP Packet sent to 10.128.181.5:2427--->
RSIP 201356931 *@voicegw-remoteoffice.local.domain MGCP 0.1
RM: restart
<---
*Sep 5 16:52:47.631: MGCP Packet received from 10.128.181.5:2427--->
500 201356931
<---
I verified the domain name is exactly the same as the name configured on CUCM, I tried multiple time toggling ip domain name on C2901 also, somehow CUCM does not like RSIP message from C2901, I don't have knowledge to get debug information from CUCM side of why CUCM does not like the MGCP message sent by C2901
3), When the communication is blocked from C2901 to central call manager (by using a simple ACL on C2901's default gateway device), I can still make the inbound call to an IP phone, which means, phones were correctly registered to C2901 when communication to call manager is broken, but I can not make outbound call, phones always get quick busy beeps, test call from C2901 itself (by using "csim start") is fine, which means dial-plan and ISDN/PRI is fine.
I believe we are just doing very very basic configuration and this is a common scenario, what could I do wrong?

You dont need the mgcp related commands if you are using H323. The commands that you need are:
application
global
service alternate default
call-manager-fallback (or) telephony-service and the relevant commands under it.
Also make sure that SRST reference has been added to the DP and the phones reset after the change made. This is what tell the phone to register to the SRST gateway when the WAN is down. The IP specified in the SRST reference should match whats configured under call-manager-fallback.

Can't register with itunes with a credit card from outside the USA

Who do I write to, to complain that because I don't live in one of
the countries listed in the drop down list on the Itunes store, I
cannot register my credit card OR purchase from Itunes ?
I am trying to register to buy online with ITUNES. However the
system does not seem to allow me to change the country from the
United States to Argentina where I live and where my Bank of America credit card is registered !
Come on guys, I thought Apple was better than this and recognised
that there is a world outside Bill Gates' USA ! How can I change the
country ?
[email protected]

Unfortunately, if your country doesn't have it's own store, you are out of luck. Content providers such as record companies require a CC with a billing address from the country that you use. The content providers require this rule as they do not care for cross-border sales, so it really is not Apple's fault.

Can't register with CWM on device

Hi,
I've been trying to register my 5800XM (latest firmware) with CWM Australia for days now, but I just can't get it to work. I've tried both the house WLAN (which the phone is correctly set up for - no problems web browsing/VoIP/podcasts/etc) and 3G as the net connection.
I run the "Nokia Musi Store" app on the phone, and get a browser-like screen where I select my country (Australia). It then does one of two things:
1) most of the time, it does nothing for several seconds and then pops up "Music Store: Unable to perform operation"
2) much less frequently, it instead goes to a screen where I can enter information including the CWM PIN. If I then press "Join", it rejects anything I got wrong (eg. non matching password fields) and I have to do it again. If I didn't get anything wrong, though, it just does nothing for a few seconds (the 'Join' button is inaccessable during this), then the Join button comes back, but absolutely nothing else changes - no error message, no new screen, no UI changes at all in fact - it just looks like I never pressed "Join".
And because of this, I'm not going to be able to register within the 2 month limit (phone was a present, so sat with someone else for a while) despite starting well in time.
This is just not acceptable. And I won't even go into all the other problems I've had with both Nokia device and PC software in the last months. Suffice to say I'm a software developer, and I'd be embarrased if it were me.
Does anyone know a Nokia number in Australia where I can get someone to sort this out?
Thanks!

(I'm keeping a log of the events here, as I suspect it will be needed)
Still no call back by Wednesday Feb 24th so tried calling them again (1300 366 733 #4 #2).
Got through the menu system, the "we are very busy - consider calling back later" warning, and the lengthy queue wait to a man who was impossible to understand (partly because of the extremely **bleep** call quality).
I explained I called three days ago and hadn't received the promised "24-48hr" follow up call. He asked for the case reference number, which of course I was neither given nor knew about. No problem, he found it from my return phone number. He went off to check, put me on hold, and I'm cut off. I waited 15 mins for a callback (he knew my number after all) but nothing.
So I called again. After another "we are very busy - consider calling back later" warning, and a lengthy queue wait I got a woman, who was a bit easier to understand. She looked me up from my phone number and found the problem report.
After putting me on hold for a few minutes, she very unsurely informed me that Comes With Music in Australia was "having a system update" and "not working at the moment".
I didn't believe that. I'd been having the same problems with the same behaviour, whether trying to register on the device or PC, for several weeks. Nothing ever seemed any different. I had once got a message about CWM/Ovi Music not being online when running Ovi Player, but not recently.
Furthermore I had, at one point last Sunday, tried another "clean" PC and phone just to see what happened. That is, I installed Ovi Music, connected up another 5800XM (a UK one, that time) and tried to register. That time it did actually do something, for once, returning with an error message that the connected phone wasn't a CWM device (true). But as soon as I went back to my own PC/phone, it behaved exactly the same again. Even after a complete reinstall.
So I asked how long it had been offline for, but she "didn't have access to that information". I asked how long it was going to be offline for, she ddidn't have access to that information either. I asked if she could confirm it had been offline since the previous Sunday, same answer.
I gave my reasons why it didn't seem a likely explaination to me, but was told she couldn't help and I should continue to wait for the "12 to 24 hour" elevated support return call, however long it took. I expressed doubt I'd get one at all, and reiterated my concern about the 2 month CWM registration limit, and got a vague (and hardly confidence inspiring) "oh that'll be alright".
So I will continue to wait. I might do some googling to see if this problem is related to the 40.0.005 firmware version, which both phones were upgraded to as I've found that that creates all sorts of other problems.

Can not register with my primary e-mail or change e-mail

Hello, I'm new on this forum (just registered)
At first, sorry for my English, I'm Ukrainian, and don't know English well.
When I try to register on this forum with my primary e-mail edio [@] ukr.net , I get a message, that this mail is banned. Can it be fixed?
Because e-mail, that I had entered during registration I use only for my college. This helps me to organise my mail.
Thanks in advance

neotuli
Thank you. Now my e-mail is changed.
sand_man
I just tried to write my first post best It is hard for me to understand and remember that cobweb of times in English, and writing without mistakes takes a lot of time.

I can't register with nokia ovi suite!!

Hi guys,
I am having problems registering my account with Nokia Ovi Suite. It is not allowing me to enter my UK mobile number, specifying international format.
I am using +44 (0)........Is this the correct way to format it? It is not allowing this code. I have also tried using 0044 07.....but it's not allowing that either. What is the correct way to format my number so that I can complete my registration?
I would like to save photos from my phone on to my pc. How do I do this?
Thank you.
Sunil.

Hi i noe this is like a year post thread. But im having the same problem as well. The thing is im fro Australia! so lets say my mobile number is 0432654765
so its tells me to put +61 ...
so i put +61432654765, and it didnt work
so again i put +6132654765
and it didnt work...
so again +61654765
and nah dah!
PLEASE HELP, what do i dooo?

VG224 MGCP can´t register to CUCM 8.6.2-20000-2

I have tried to register cisco VG224 to CUCM 8.6 like MGCP gateway but it fail to register, any idea why this issue?

Yes I have configure the FQDN of the gateway in CUCM.
Debug logs Are:
VGALP01(config)#
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcpapp_process_sys_msg(208):[lvl=0]MGCP sys msg: (EXTERNAL_EVENT)
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/xlate_mgcp_sys_ev(69):[lvl=0]xlate sys msg: (EXTERNAL_EVENT, 63FE0988)
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcpapp_process_sys_msg(217):[lvl=0]sys msg values: (INVALID MGCP EVENT, 0, , 3647, CALL_IDLE)
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_handle_cmapp_event(442):[lvl=0]process
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_get_by_ifn(1330):[lvl=0]Entered
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_get_tree_link_by_ifn(1149):[lvl=0]Entered
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_compute_key(198):[lvl=0]type -1 slot FFFFFFFF subunit 0000
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_get_tree_link_by_ifn(1161):[lvl=0]computed key 0xF0000000
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_cmapp_send_rsip(407):[lvl=1]Send-RSIP: Sending gw host is VGALP01.volcan.com, endpt is *
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_root_get_profile(1905):[lvl=0]Entered
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_send_rsip_msg(737):[lvl=0]Entered
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_packet(864):[lvl=0]Entered
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_estimate_msg_buf_length(496):[lvl=1]328 bytes needed for header
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_estimate_msg_buf_length(785):[lvl=1]344 bytes needed after checking parameter lines
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_estimate_msg_buf_length(808):[lvl=1]344 bytes needed after cheking SDP lines
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_parameter_lines(9499):[lvl=0]Entered
*Mar 1 01:59:49.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_val_mandatory_parms(13005):[lvl=0]Entered
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_restart_method(12063):[lvl=0]Entered
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_restart_method(12085):[lvl=0]SUCCESS: Building Restart Method (RM:) OK
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_parameter_lines(9802):[lvl=0]SUCCESS: Building MGCP Parameter lines is OK
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_packet(1018):[lvl=1]SUCCESS: MGCP message building OK - END of building
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/MGCP_NEDB_get_next_addr(1211):[lvl=1]
NOTIFY ENTITY = 10.24.130.11
next->10.24.130.11
*Mar 1 01:59:49.931: MGCP Packet sent to 10.24.130.11:2427--->
RSIP 957884407 *@VGALP01.volcan.com MGCP 0.1
RM: restart
<---
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_endpt_record_rsip(615):[lvl=0]Entered
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_send_rsip_msg(882):[lvl=1]Manually recroding RSIP method
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_endpt_record_rsip(615):[lvl=0]Entered
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_enq_retx_rsip_msg(396):[lvl=0]Entered
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_add_trans_id_rec(1137):[lvl=1]Add trans id (957884407, 646D36B8) record
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_stw_timer_start(393):[lvl=0]timer type 0, duration 500
*Mar 1 01:59:49.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_stw_timer_start(393):[lvl=0]timer type 15, duration 20000
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_count_active_mgc_msg_stat(239):[lvl=1]MGC stat - 10.24.130.11, total=47, succ=0, failed=46
*Mar 1 01:59:49.935: MGCP Packet received from 10.24.130.11:2427--->
500 957884407
<---
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcpapp_process_mgcp_msg(3536):[lvl=0] :
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_parse_packet(312):[lvl=0]call mgcp_parse_header
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_parse_packet(316):[lvl=0]out mgcp_parse_header
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_parse_packet(326):[lvl=1]SUCCESS: - MGCP Header parsing was OK
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_parse_packet(344):[lvl=2]SUCCESS: - END of Parsing
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_msg_ack(6687):[lvl=0]Entered
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_count_active_mgc_msg_stat(239):[lvl=1]MGC stat - 10.24.130.11, total=47, succ=0, failed=47
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x640982F8 pkt->mgcp_parm_lines 0x00000000)
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_check_for_redirection(6548):[lvl=1]endpt * was not redirected
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_msg_ack(6759):[lvl=1]Removing msg : RSIP 957884407 *@VGALP01.demo.com MGCP 0.1
RM: restart
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_msg_ack(6831):[lvl=0] Received ACK for RSIP, setting the restart method to NONE
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_check_and_send_pending_rsip(2116):[lvl=0]Entered
*Mar 1 01:59:49.935: //-1/xxxxxxxxxxxx/MGCP/mgcp_check_endpt_ext_and_free_rsip_info(3320):[lvl=0]Entered
*Mar 1 01:59:49.939: //-1/xxxxxxxxxxxx/MGCP/mgcpapp_process_socket(3647):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcpapp_process_sys_msg(208):[lvl=0]MGCP sys msg: (EXTERNAL_EVENT)
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/xlate_mgcp_sys_ev(69):[lvl=0]xlate sys msg: (EXTERNAL_EVENT, 63FE099C)
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcpapp_process_sys_msg(217):[lvl=0]sys msg values: (INVALID MGCP EVENT, 0, , 3647, CALL_IDLE)
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_handle_cmapp_event(442):[lvl=0]process
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_get_by_ifn(1330):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_get_tree_link_by_ifn(1149):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_compute_key(198):[lvl=0]type -1 slot FFFFFFFF subunit 0000
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/xgcp_endpt_get_tree_link_by_ifn(1161):[lvl=0]computed key 0xF0000000
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_cmapp_send_rsip(407):[lvl=1]Send-RSIP: Sending gw host is VGALP01.volcan.com, endpt is *
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_root_get_profile(1905):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_send_rsip_msg(737):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_packet(864):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_estimate_msg_buf_length(496):[lvl=1]328 bytes needed for header
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_estimate_msg_buf_length(785):[lvl=1]344 bytes needed after checking parameter lines
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_estimate_msg_buf_length(808):[lvl=1]344 bytes needed after cheking SDP lines
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_parameter_lines(9499):[lvl=0]Entered
*Mar 1 02:00:19.927: //-1/xxxxxxxxxxxx/MGCP/mgcp_val_mandatory_parms(13005):[lvl=0]Entered
*Mar 1 02:00:19.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_restart_method(12063):[lvl=0]Entered
*Mar 1 02:00:19.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_restart_method(12085):[lvl=0]SUCCESS: Building Restart Method (RM:) OK
*Mar 1 02:00:19.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_parameter_lines(9802):[lvl=0]SUCCESS: Building MGCP Parameter lines is OK
*Mar 1 02:00:19.931: //-1/xxxxxxxxxxxx/MGCP/mgcp_build_packet(1018):[lvl=1]SUCCESS: MGCP message building OK - END of building
*Mar 1 02:00:19.931: //-1/xxxxxxxxxxxx/MGCP/MGCP_NEDB_get_next_addr(1211):[lvl=1]
NOTIFY ENTITY = 10.24.130.11
next->10.24.130.11
*Mar 1 02:00:19.931: MGCP Packet sent to 10.24.130.11:2427--->
RSIP 957884409 *@VGALP01.demo.com MGCP 0.1
RM: restart
<---

I am buying an ipad 2 off my friend and is only 6 mths old. How can I register with Apple that I am the new owner of the Ipad2?

Do I login and rename the product as mine?

Hello henry lfrommiami,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
Update your iPhone to the latest version of iOS.
Turn airplane mode on and then off again.
Restart your iPhone.
Check for a carrier settings update. Go to Settings > General > About. Install any available update.
Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
Restore the iPhone.
If you still see the issue, contact Apple support.
If you see 'No SIM' alert on iPhone
Cheers,
Alex H.

ATA-186 can be registered with CUCM v10.5

Similar Messages

Maybe you are looking for