ATA 186 does not support hotline with IP dialing procedure.

In a network without gatekeeper, I make H.323 calls from one ATA to other ATA, dialing in nn**n*n*n*n# format.
When I put the string in DialPlan as hotline number H0nn**n*n*n*n#, it does not work.
Can anyone help?

For one Cisco ATA to access a specific FXS port on another Cisco ATA, you use an IP dialing procedure. The Cisco ATA originating the call must have the following information about the destination Cisco ATA:E.164 phone number of the destination FXS port
IP address of the destination Cisco ATA
To enable the IP dialing procedure, you need to set the IPDialPlan parameter to 1 to instruct the Cisco ATA to look for the destination IP address in the dialed digits
.http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a0080160f6f.html

Similar Messages

  • Keynote does not support exporting with embedded Quicktime Movies

    I hope this helps a few of you out before you run into this problem.
    Keynote does not support export to Quicktime with any slides that contain a quicktime movie.
    Created a 27 page slide show with transitions, music, narrations and 6 Quicktime movies (Actually LiveType Text scrolls)
    When I attempted to export it never finishes the export cutting it short after about 20 pages.
    And the pages with the movies, don't start playing.
    It exports fine as a quicktime movie without the movies inserted though.
    Spoke with Apple Support and they confirmed that quicktime placed files within Keynote playback is only supported from the native Keynote Application.
    I read somewhere on this board that it was an issue with Quicktime version 7.5, not so as I tried the same test on a mac with Quicktime 7.42 and it had the same issue.
    So, beware.
    LJS

    Maybe I didn't understand well what you said but it is possible to export a Keynote file with embedded Quicktime movies to a quicktime movie. Actually, I'm doing it and I works. BUT, the issue I get is that I can't get my embedded videos to loop. Grrr...

  • CSCul50370 - C-Series TC does not send DTMF with secondary dial tone or ringback tone

    This bug has also been confirmed to affect SX20 Quick Sets.

    Hi Jose,
    Firstly is this a UC-500 based CME? I am not aware of a 8.5 version for the UC-500 unless this is a pre-production release, as far as I am aware the UC-500 is only supported up to 8.1 at this stage.
    It would also be good if you could provide a copy of your running configuration (With sensitive data removed like usernames and or passwords and peoples names and numbers), this will help us in understanding the system configuration.
    It also seems that the system has not been configured with CCA as there are no identifying markers in the configuration you posted that would indicated this was a CCA build, which leads me to think that this is a CLI build right??
    I am personally not very ofay with the Portugal carrier setup so I best not post up a configuration of what the Voice-Port looks like as it might not be compatible with your local carrier, but I am curious as to why your FXO ports start at 0/0/0 typically on a UC-500 system they would start at 0/1/0 as the first 4 voice ports are normally reserved for FXS (Unless of course this is different for your region), which again makes me wonder if this is a UC-500 system or maybe an ISR (2800 series or above)??
    Please post up your configuration it will help out a tremendious amount.
    Cheers,
    David.

  • The build specifications does not support VIs with dynamic dispatch terminals

    Why?
    Will it be supported in the near future ?

    pacome wrote:
    I wanted to build a shared DLL.
    The problem occurs when an input Control is a dynamic dispatch terminal.
    "Now that's a horse of a different color!" (Caby, Wizard of Oz, Emerald City Scene).
    Yes the DLL spec never knew about dynamic dispatching.
    Your best option is to wrap the LVOOP stuff up in wrappers and expose the wrappers.
    I'm curious if others have ideas as well.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • TS1416 It seems the latest itunes version does not support sync functions to ipod classic

    I have updated my Itunes to version 11.04 but it seems this version does not support syncing with Ipod classic it seems it only supports the Ipod touch.  Does anyone have any solutions for this problem?

    Device not recognized. Take note of item 5.
    http://support.apple.com/kb/ts1538

  • Does it supports writing with stylus .

    I have a windows tab on which I have installed thunderbird, but it does not support writing with stylus. Pl advise. The MS outlook supports stylus.

    yea same question here, I mean they are supposed to be supporting adobe line and sketch by the end of this year ish I think. But adobe draw is just a much better app imo.
    If there will not be support soon I will have to buy the adonit Jot Touch instead of the Creative Stylus 2

  • Adobe Creative Cloud does not support Bootcamp by Apple IOS operating system, but does work with boot camp Win 8.1 why"

    Adobe Creative Cloud does not support APPLE latest IOS operating system, but does allow Windows 8.1 to be accepted. This seems a shame to me, as
    Apple IOS is the leader in graphics, photography. The advertising states it is usable under both APPLE IOS and Microsoft 8.1 windows operating systems. Adobe Support Chat Sooraj tells me on 02/19/2015 that i must buy two computers to have it operate on both operating systems. Adobe will not support apple's Boot CAMP allowing both operating systems.
    i love the apple product and love the ADOBE Photoshop CC, but it simply does now work with an apple keyboard and a WiN operating system. .[email protected]  Adobe Creative Cloud

    In Thehatters defence, this was initially posted in the MacbookPro forum and then moved to Boot Camp,
    If you have any joy solving your trackpad device driver issue, feel free to post here (there might be a similar fix for my  wireless adapter device)
    Thanks

  • SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

    when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
    OS: Windows Server 2008 Enterprise x64
    IE: 9.0 32bit
    webcient service is runing
    HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
    Anybody knows how?
    Thanks.

    Did you add your site to trusted site list?
    http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
    --Cheers

  • HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  Could not complete backup to media share.  The network backup disk does not support the required AFP feat

    Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive.  "Could not complete backup to media share.  The network backup disk does not support the required AFP features."  What are AFP features and how do I get Time Machine to backup to my current external backup?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

    i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

    Try downloading the trial. It ought to detect that you have a 64-bit system.
    You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

  • Your Client Does not Support Opening this list with Windows Explorer on Windows Server 2012 R2

    I am trying to open a document library in Internet Explorer 11 on a Windows 2012 R2 server and I am receiving Your Client Does not Support Opening this list with Windows Explorer

    Hi,
    According to your post, my understanding is that you wanted to open a document library with the Internet Explorer 11 on a Windows 2012 R2 server. But you received the following error message: Your client
    does not support opening this list with Windows Explorer.
    There can be multiple reasons for it.
    So, I recommend you can check with the following steps:
    Go to the “Server Manager” of “Administrative Tools” > Enable the “Desktop Experience” feature in your environment.
    Go to the “Services” of “Administrative Tools” >
    Ensure the “WebClient” service is started.
    Ensure that your computer has supported Web browser.
    Ensure that Internet Explorer is configured correctly to add
    https://*.sharepoint.com to Local intranet site in the “Security Tab” of “Internet Options”.
    Ensure that
    you have applied the latest updates on the system.
    For more information, you can refer to the following articles:
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    http://mcgeeky.blogspot.com/2010/02/your-client-does-not-support-opening.html
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Your client does not support opening this list with windows explorer - related to multiple uploads?

    Hi folks -
    I've read through some threads regarding "Your client does not support opening this list with windows explorer" and it seems a lot of folks have a lot of solutions throughout the forum posts.  Is there anything official or semi-official regarding
    this? 
    I've tried a lot of the fixes including:
    checking to see if the WebClient service is on
    modifying so-and-so registry (I've since changed them back since they seem to have no effect)
    and changing various settings in Internet Options including making sure the site is in the Local intranet zone.
    I could live without this functionality but just recently my upload-multiple-files functionality in SharePoint 2010 has also gone away (red x instead of directory UI).  I wonder if it's related somehow and could give us a clue.
    If it helps I'm using various browsers but of the IE flavor 8 and 9 32-bit as the base for testing this.

    For SharePoint 2013 (so could apply to 2010 as well), my problem was that I was trying to "Open with Explorer"
    something that probably can't be opened with Explorer. In my case, I just wanted to open my team's Shared Documents with Explorer. I found that when I first log into SharePoint and view the page, I'm presented with those Shared Documents, but also other things
    as well.
    To get "Open with Explorer" to work, I must click "Shared Documents" under the Libraries heading on
    the left. Then, all the other stuff (Links, Getting Started, etc.) go away and I'm focused on my team's shared documents. From there, I can go up to the Library Tools section in the ribbon, choose the Library tab in the ribbon, and click Open with Explorer.
    Works like a champ on Windows 7 64-bit, running IE 9 32-bit.
    Unfortunately that's not what was going on in my case.  One obvious way to check is to see if other people or other computers can Open with Explorer.  In my case it was just this one machine on my desk that had the issue.

  • In SharePoint 2010 Document Library "Open with Explorer" Your client does not support opening this list with Windows Explorer

    Hi.
    I am getting below error "Your client does not support opening this list with Windows Explorer" while click "Open with Explorer" option in document library.
    My system is client machine which is 32 Bit system and
    Web Client service is also running and Window 7 PC.
    Other SharePoint sites "Open with Explorer" option in document library is working fine but specific site is giving error.
    Even it was working fine but not is giving this error.
    Please help me on it. Its making frustrations.
    Thanks & Regards
    Poomani Sankaran

    Hi,
    According to your post, my understanding is that you got “Your client does not support opening this list with Windows Explorer” error.
    Did you enable the both authentication (Windows and FBA) on default zone.
    As far as I remember when FBA is enabled on the same zone when Windows is used, it breaks whole client integration.
    So it will be better if you will recheck your architecture and will use different zones for Windows and FBA.
    There is also another thing to try: use claims based authentication with authentication provider which will work both with Windows and FBA.
    What’s more, you can also check with below steps.
    Use compatibility mode to check whether it works.
    Open IE->Tools->Compatibility View Settings
    Add the site into Trusted sites to check whether it works..
    Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
    In addition, you can also try to enable Basic authentication on the client computer, by setting the BasicAuthLevel registry entry of the following key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters
    For detailed steps, visit the following KB page.
    http://support.microsoft.com/kb/841215/en-us
    There are some similar threads for your reference.
    http://social.msdn.microsoft.com/Forums/en-US/e9a07773-db23-46e9-8d1d-7015cd5aa13b/your-client-does-not-support-opening-this-list-with-windows-explorer?forum=sharepointgeneralprevious
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Trying to open a sharepoint library in Windows Explorer via IE 8 results in the error "your client does not support opening this list with windows explorer"

    I am attempting to connect to a Microsoft Sharepoint library, via the "Actions -> Open in Windows Explorer" option from the Sharepoint page.  When I do so, I get the error message "your client does not support opening this list with windows explorer".  In short, I am trying to get the "drag and drop" functionality of a Sharepoint library.
    I am running Windows 7 64-bit and IE8.  The target Sharepoint environment is a MOSS 2007 EE.  My Windows "WebClient" service is running, and I have no problem connecting to this exact library via a Windows XP computer running IE8.

    Verify that the Webclient is started automatically from the Services.msc
    Verify that your Portal is in the Intranet local security zone (You can reach it from Your Internet Explorer Browser Security Tag) if not add it to the list
    restart the WebClient service if it's work good
    If not you have to create a network share to your portal URL directly not your documents library.
    Open Windows Explorer or My Computer from the Windows Start Menu.
    From the Tools menu, click Map Network Drive…. A new Map Network Drive window opens.
    In the Map Network Drive window, choose an available drive letter from the dropdown list located next to the "Drive:" option. Any drives already mapped will have a shared folder name displayed inside the dropdown list, next to the drive letter.
    Type the name of the folder to map wich is in this case your SharePoint Portal URL (Don't include the documents libraries)
    Click the "Reconnect at login" checkbox if this network drive should be mapped permanently. Otherwise, this drive will un-map when the user logs out of this computer.
    If the remote computer that contains the shared folder requires a different username and password to log in, click the "different user name" hyperlink to enter this information.
    Click Finish.
    I am looking for a suite method :)

Maybe you are looking for