ATA 186 needs assistance configuring to work with SIP

Hello. Just got ATA 186. I would like to use it as SIP FXS. I already have FXO with the POTS plugged in. I don't want o use the gateway or the gatekeeper. I would like to configure it to be IP dialing. II am running SIP image ATA030201SIP050616A.zup. Any help is greatly appreciated.
George

Hello, already replied in another thread, please do not open duplicates.

Similar Messages

  • I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

  • Recovery and Applications CD not configured to work with this machine.

    Satellite A215-S4757
    Machine trashed due to virus and want to reset to original configuration.  Using disk 1 of 2 labeled RECOVERY AND APPLICATIONS/DRIVERS SATELLITE A210/215 SERIES WINDOWS VISTA HOME PREMIUM 32 BIT.  When the CD boots an error is displayed.  The error reads:
    "This Recovery and Applications CD is not configured to work with this machine (*).
    This CD is for: Satellite A215, Satellite A210
    Please use the correct Recovery and Applications CD."
    Can you tell me why this is not recognizing the machine correctly?  Thanks for the help.
    R/Jim

    Satellite A215-S4757 
    You need the utility which resets the DMI string for that model. Call Toshiba tech support at 800-457-7777.
    -Jerry

  • Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

    Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
    business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
    The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
    the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
    If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

    "The Ipad is on a short cable to my projector."
    Get a longer cable?

  • Can cisco MSE(mobility service engine) configured to work with non-cisco access points?

    I understand that access points can be configured to forwards all the probe requests to cisco wifi controller. cisco MSE(mobility service engine) gets the probes from wifi controller to find the location of the mobile devices.
    My question, can cisco MSE(mobility service engine) be configured to work with non-cisco access points?

    No and the reason why is the NMSP communication from the MSE to the WLC. Other vendors don't support this so there is no communication happening.
    -Scott

  • I bought the external DVD player/burner for my Macbook.  I tried using it with my Dell laptop but it will not work.  Is it not configured to work with anything but apple operating systems?

    I bought the external DVD player/burner for my Macbook.  I tried using it with my Dell laptop but it will not work.  Is it not configured to work with anything but apple operating systems?

    If you purchased the Apple USB SuperDrive, it will only work with select Apple devices. It won't work, for example, on my Late 2011 model that has a SuperDrive built-in, but it will work with an Air, Retina model, new 'drive-less' iMacs, etc.
    As far as I know, though, you can only hack the drive to work with some other Apple devices, but not with Windows PCs. Which is a shame as other, less expensive DVD/CD devices will work with just about any machine.
    Sorry,
    Clinton

  • I m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    i m coming from linux platform ... now need my g   to work with vim ... how to install g   which supports C  0x ... why does  not it has repository with apple ... its so easy rather than going to UI ...

    tom i have been using ubuntu for c++ project
    i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
    installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
    to compile wanted to have g++ which supports c++0x features ...
    new to MAC (2-3 days) so was in rush to solution
    let me know if you have some suggestion ...
    else will try with eclipse cdt .... 

  • Arch Assistant no longer works with netcfg

    Finally arrived home where I could update Arch.  Now Arch Assistant will not work with the netcfg profiles I set up previously.  I can use netcfg by logging in as root and typing a profile afterwards, but I find this tedious.  How can I get this to work again?
    EDIT: I see that Arch Assistant has been orphaned - unfortunately.
    Last edited by David Batson (2012-06-08 04:48:49)

    http://kde-apps.org/content/show.php/Ar … tent=76760 shows last update as 8th May 2008, so unless someone takes up maintainership....
    Please mark the thread as [solved] (well, it isn't really but you DID find your answer as to why).

  • Newbie in need assistance configuring iChat server (LDAP).

    I needs some assistance in setting up iChat server for our office. I running LDAP and I have the iChat server basics setup and it is working, however my boss wants to set up different domains in iChat for the various departments (i. e. Accounting, Sales, production, etc.). These will not be accessed outside of the building. He states I need to configure additional search bases. It is at this point I am drawing a blank.

    Hi Paul,
    An intersetng one.
    James Weston may be able to post more on this.
    iChat can Chat to other Macs using the Bonjour option
    (Click the Apple/Command key + 2 together)
    Bonjour has to be enabled in the Account section of iChat Preferences.
    All computers have to be in the same subnet
    This is going to be the sticking point.
    Lets say you have one routing device for your local net and it issues all computers and devices with IP Addresses in the range 192.168.1.xxx then all the computers on on the same Subnet as there is only one LAN.
    If you have subsequent routers that change the IP addresses to somethng like 192.168.1.xxx for sales and 192.168.2.xxx fo accounts etc, then you will have subnets. Computers in 192.168.1.xxx will only see other Bonjour/iChat computers in that group and the same for 192.168.2.xxx but not from group to group.
    To show up in the Bonjour window iChat takes the Address Book Me card entry of the MAc user account and broadcasts it to the other computers.
    This would give you an option of using this method to pass out information where people were. The revelant "Sales" or "Accuounts" could be added to their Real Names.
    (Bonjour would have problems if several computers were changed to read just Sales as the Address Book name).
    An alternative would be to set up a VPN and have all computers on the same network for Bonjour independent of any of network they were on.
    James knows more about networks than I do and may have other information that may help.
    Ralph

  • How to install,configure and work with omniportlets

    Hi,
    What are the steps i need follow to install and work with omniportlets.
    What are the softwares in need install. Please give required steps.
    I downloaded.
    1.PDK-Java software, PortalTools (OmniPortlet & Web Clipping), and common libraries
    2.Download the preconfigured OC4J.
    Is there any additional softwares needed.
    I should install Application Server 10g?
    I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
    Thanks.
    NR

    Hi,
    working with omni portlets they given two installation methods.
    1. the preconfigured standalone OC4J with OracleAS PDK.
    2 Iinstall OracleAS Portal as part of the Oracle Application Server release, then most of the configurations are already done.
    I have
    OS: Redhat Linux 4
    Browser:Mozilla firefox 1.5.0.3
    database:Oracle10g.
    I performed 1 method but while openig link   http://172.16.122.249:8888/portalTools/omniPortlet/providers/omniPortlet
    i am getting the error
    Error occurred while rendering Provider Test Page - view the HTML source for more details
    I have to create some demos using omnipotlets which are given in the page url:http://www.oracle.com/technology/products/ias/portal/omniportlet.html
    what installations i need to done.
    Please help me.Thanks
    NR

  • I need help configuring a connection with asdm 5.2 for asa

    Hi All
    I am very much a novice with asdm 5.2 for asa and I urgently need to configure a connection but don’t know how to. I have 2 domains at work and someone is trying to connect their sql client from their pc in one domain to the sql server in the other domain (DMZ).
    When he tries to connect he gets the error
    Cant connect to MySql Server at "IP Address" (10060)
    He is trying to connect on port 3306. Could anyone please give me any tips on how i can resolve this quickly? I know i am
    trying a shortcut on this one but I recently started a new job and thrown in the deep end here and need to learn this asdm 5.2 for asa product from scratch with nothing more than the manual that come with the cd . My Cisco knowledge is from 2001 when i did half of a ccna course.
    Any help would be greatly appreciated

    Hi,
    I'm not a security specialist but here is how I had it set up at home:
    Essentially a NAT and a rule forwarding the port are needed. In this particular case I had an Oracle server running and a person requested remote access. So, for example, the source address was his external IP and the destination was the Oracle's external IP. For the NAT the source was the internal IP of the Oracle server and the interface was Outside.
    Hope this points you in the right direction.

  • How can an ADF Tree be configured to work with varying levels of heirarchy?

    We have a need for a Locations tree that represents the Locations heirarchy for any one of our clients. Depending on the client the number of levels in a location heirarchy could range from 1 to 9.
    I have created 9 different tree bindings and I can change the tree binding in the jsp page - the example below is for a client with 4 location levels.
    <af:tree value="#{bindings.ScdLocs4View1.treeModel}" var="node"
    binding="#{backing_locations.tree2}" id="tree2">
    For a client with 5 location levels, I'd like to programatically change the value to
    #{bindings.ScdLocs5View1.treeModel.  How can I do this?
    I was thinking I could use the setValue method on the tree control in my page's backing bean.  But I have been unable to get a reference to the tree binding.
    I don't see an appropriate method for finding a Tree Binding.  There are methods for finding an Iterator Binding, an Executable Binding, or a Region Binding (whatever that is).  But how do I "find" a reference to a Tree Binding?
    I have also given consideration to using a single Tree Binding with 9 levels (or rules in the Tree Binding Editor) and finding a way to  programatically "start" the rendering at a particular level (or rule) - in effect telling the ADF Tree control to ignore some number of rules and begin with the specified rule.  But I haven't been able to figure out how to do this either.
    Help would be greatly appreciated.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Bill,
    A tree binding is a particular kind of control binding, so you can find it as a control binding and then cast it to the more specific interface to work with it.

  • Need a developer to work with me - FMS/Flex/RTMFP/RTMP etc.

    Hi,
    I already own a video chat website that uses strictly Stratus (RTMFP), as you may already know, the connections between the peers are not always stable, as in people don't always connect to each others.
    From my past programmer's opinion, it was because of Stratus, he is sure his coding is good.
    With the release of FMS 4, which includes RTMFP, my plan is to modify my website so it works with FMS 4 Enterprise Edition, which I will be purchasing.
    I want to combine both RTMP and RTMFP in the connections between the peers.
    There are also a lot of improvements to come for my website, which is all about Flex/FMS/php/MySQL.
    If you want to be the first to take part in a project that's going to be very big because of :
    1. The opportunities that FMS 4 offers us;
    2. The motivation I have, and that you should have!
    3. The resources I have to keep growing effectively.
    So, if you are competent with this type of programming project, please reply and contact me
    Thanks,
    Dany

    http://www.adobe.com/products/flashmediaserver/helpmechoose.html
    If this is correct the RTMFP peer introduction services is available only to the Enterprise version, FMIS support RTMFP and IP unicast only, means communication is only betweend Client and FMIS possible but no peer2peer. I'm not a FMS Guru, but I think you can't replace with FMIS the Stratus service for a application as Webcam chat and if you use FMIS for it without Stratus you need to provide the needed bandwith.
    If I have missunderstand I would be happy, this will save for me many bucks :-)

  • I need a keyboard that works with IOS 7, Any ideas?

    I have tried two different keyboards,one from Belkin and one from logitech...neither one works with IOS 7....I need a keyboard that works...anyone have any ideas?

    I have the apple mini wireless keyboard. Works!

  • WCS does need WLC or can works with stands alone APs

    Hi all, I'm student and curently reading about WCS capacity. I would know if WCS requier AP to pass through a WLC to work with WCS or if WCS can work with multiple "stand alone" APs (without any WLC)
    Thanks.

    WCS can work with standalone APs that you can add in WCS.
    Nevertheless the configuration options are limited.
    The configuration guide is a good resource for more information.
    http://www.cisco.com/en/US/products/ps6305/products_installation_and_configuration_guides_list.html
    Also you can get an evaluation license for WCS for 60 days for 20 APs.
    You can download the software and play with it as well:
    http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=279705270
    WCS general product page:
    www.cisco.com/go/wcs

Maybe you are looking for