ATA-186 with overhead paging systems

Since the ATA-186 supplies 600 Ohms, would I need a seperate device such as a Bogen TAM-B to supplie the audio for overhead paging, or could I just use the ATA-186?

ATA-186 can be used as an audio source.

Similar Messages

  • CUCM mulitiple paging via ATA and third party paging system

    We have several campuses in our school district that use an ATA connected to a third party paging system.  A couple of the Schools are merging...and they wanted to know if we could in some way "link" the two paging systems so that they only have to call one extension when they page.  We are currently using CUCM v 8.6.1
    Thanks,
    Greg

    Yeah, that won't work, plenty of people had already tried that to simulate a paging system, you only get the connection to the device that answers the call.
    The only possible way I can think of, assuming they're in the same physical area, is to actually fork the cable from the ATA to the paging system.
    If not, they'll have to live with two DNs for paging.

  • Configuring FAX on ATA 186 with CME 3.4

    Hi,
    I have an ATA 186 connected to my network, I have configured CME for auto assign extensions & I got an extension as well, when I connect analog phone it works fine but when I connect FAX Machine I cannot send & recieve fax. Do I need to change any configurations in ATA???? Please check the screen shot attached

    Try this link for more information on configuraing FAX on ATA
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml

  • ATA 186 with External Bogen Night Ringer

    Using Call Manager, I am using an ATA with and External Bogen Night Ringer. It works when I call the ATA extension and the Speakers Ring out but when I call forward a ip phone to the ATA DN the speakers do not output anything. My goal is to call forward the main DN of the receptionist to the ATA hooked up to the Bogen TPU-100B paging unit that has the night ringer functionality. I thought it might be some sort of gateway issue but the call forward does not work from IP Phone Calling another IP Phone that is call forwarded to the ATA with the Night Ringer. Does anyone have any ideas.

    http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=Video%20over%20IP&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.ee944f1/3
    I think the ring voltage is not suffecient enough from the FXO being passed to the ATA, I think I need to viking RG-10A to sit inline and boost increase power on the line. The Bogen requires 90V.

  • Ata 186 with Polycom MGC 100

    I'm trying to setup an audio conference on a Polycom MGC100 with a Cisco Ata186. I can dial out to the Ata using the IP address and the Ata will answer but it disconnectes after 30 seconds. Has anyone else tried this and if so what were your results? Thanks.

    I have the same problem as well with CM 6, however my calls last about 30 minutes then disconnect.
    Has anyone found a solution?

  • Problem to register ATA 186 with CME 7.0

    Hello,
    I have to two ATA connected into switch that are connected with Cisco 2851.
    The first ATA was connected in the past and it works well, now I need to connect another ATA  but I don't be able to register in CME.
    Both ATA have the same version of firmware, and got ip by the dhcp.
    I've checked the ports in switch where are connected the ata's and have the same configuration.
    To register the new ATA I go into CME portal and when I try to add a new phone I receive a message that say "no new phone to add".
    Please help me to fix it
    Thanks
    Regards

    Hello,
    thanks for the answers.
    I solved the new ATA was registred automaticaly in cme with a randon telephone number, for this reason I wasn't able to find it.
    With the command show ephone register I checked all the phones registered with the number and I finded the new ata.
    Thanks for your help,
    Regards

  • Overhead Paging with Callmanager

    I am finding all sorts of information about setting up paging through phones on CallManager Express. What about CallManager? I can't find anything on this. I've found commands such as ephone-dn, but this doesn't apply to a 2800 series router or CallManager. Any advice would be greatly appreciated!

    We install a paging system mainly for our warehouses using the following equip.:
    1 ata-186
    1 Valcom paging control
    x paging horns w/volume controls and powered by a Valcom power adapter.
    This works very good. The ata is configured with a DN (cti route point). I'm pretty sure you could have multiple zones configured.
    A different way that I learned last week is to use 7960 phones and assign 2 dn for paging, where 1 is the paging ext. # and the 2nd is set to autoanswer. Drawback: you need 7960s all over the place.
    Also I'm looking into the possibility of using one of Valcom's IP speakers PoE (vip-410) to replace the paging control adapter+ata. Berbee has another IP speaker but it's more expensive ($750).
    I hope this helps.
    Elliott Bujan
    Initial Tropical Plants

  • Configuring Paging system to interface with an FXO port

    Hello
       Wanted to see if there is some good documentation on configuring my fxo port on my gateway to interface with a paging system?
    Thank you for your help

    Hi Joseph,
    It really depends on the type of overhead paging system you're intending to use.   The documentation for the paging system being used usually specifies exactly what type of circuit is required.
    Kind regards,
    Craig

  • Overhead Paging with Cisco Berbee InformaCast - Caller ID when paging

    Hello, I'm using Cisco Berbee InformaCast with a Bogen overhead paging system. I have Call Manager 6.1.4 and would like to know if there is a way to broadcast the name/number of the IP Phone from which the page originated. If anyone knows of a means of achieving this I would greatly appreciate your assistance.
    Thanks,
    Dave

    Well, not sure why I haven't received any suggestions from anyone. I find it
    hard to believe that there isn't anyone else who has the same need. After going from TAC to SingleWire Support here's what I have:
    there is a way to have InformaCast display within message text the extension that sent a page.  The only catch we were running into with your current implementation was ReliCast.  If you're using a ReliCast dial pattern to page, then all InformaCast would display is the ReliCast CTI port that "called" InformaCast to make the page. It was my hope that there was a way to have the source of that trigger displayed in the reporting feature of InformaCast 7.  Unfortunately InformaCast would produce the same Information.  It would see the calling device as the ReliCast CTI port and log/report that information.
    A possible solution to this issue, a panic button.  You could setup one of the line appearance buttons on a users phone as an emergency live all page.  Then, we can just add a bit of "script" to it that would display the time, day, and source device that made the page.
    For example, you can create a new page type using a combination of Text and Live Audio.  In the Short Text section of the message you could place the following:
    "Panic Button Triggered at ${time} on ${date} by ext ${senderInfo.directoryNumbers}"

  • ATA 186 for FAX With CME

    Hi,
    I have ATA 186 connected to my network when i connect a phone it works but when I connected fax machine i cannot recieve or send faxes...do I need to do any configurations in ATA...please check the attachment..

    you'll need dial peer(s), on your CME router, that enable FAX passthrough as well as a few other pieces.
    please see the following link for Config/Troubleshooting ATA-186 with FAX:
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml#task2

  • ATA 186 - Faxing with sccp on CCME

    Is there any specific config required to get a fax working with an ATA 186 with sccp, both in the ATA settings and ccme config ?
    Any useful links or example configs would be a great help
    Thanks in advance

    Hey Mark,
    Here are some good ATA - Fax related docs;
    Field Notice: Fax Passthrough Limitations on ATA 186
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_field_notice09186a0080094af7.shtml
    Configuring the Cisco ATA for SCCP
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00801e0e0c.html
    Configuring and Debugging Fax Services
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00801e0dff.html
    Hope this helps!
    Rob

  • Use Call Manager to play media over a paging system.

    We have a Bogen overhead paging system and would like to play some music from the Cisco system. It would be for playing Brahms Lullaby when a baby is born. We currently use the phone system to access the paging via a LS port on the back of our 2821 router. We use a PCM2000 w/zones for paging. Have you all ever had to setup anything like this?

    One option would be to setup an on hold source with a .wav file of Brahm's Lullaby. You could then assign this MOH to a DN, call the paging system from the DN and press Hold. You could also set this up using an IPCC auto attendant script.
    Hope this helps.
    Brandon

  • Troubleshooting an ATA 186

    How can I tell what digits are being passed from a phone plugged into an ATA 186?
    We have an ATA 186 with a credit card machine plugged into it that is failing to place calls. When I monitor the call with a butt set I hear dial tone, then 1 digit being dialed and then an error from callmanager basically telling me to check the number. The call never gets past that first digit. If I use a butt set to place a call everything works fine. I'm concerned the digit being passed is not the access code of 8, and I want to verify that. I have also included the 9001.log from the prsrev.exe I just don't know how to read it.

    Hi,
    It look to me like the ATA isn't configured properly in CCM?
    There's a lot of messages in the log stating "RegRej[1]:Error: DB Config", which I think means the device isn't registering properly.
    Have you checked the ports are configured properly?
    Here's a troubleshooting guide which may also help:
    http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a0080094adf.shtml
    Please rate if useful...

  • Overhead Paging with a Hosted VOIP system using Linksys SPA942 phones

    Anybody have any experiance with providing Overhead Paging with a Hosted VOIP system using Linksys SPA942 phones?  I currently use a hosted service called Vocalocity and need to  now provide overhead paging to one of our sites.

    I don’t think this is possible since usually this paging opting is used with accordance with the registration from the SPA9000. I am not quite certain if this will be able to work with certain VoIP providers but if it does they should have paging capability and the paging code might also change. I suggest contacting your VoIP provider and Cisco Tech support to further look into your concern. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support: 
    http://forums.linksysbycisco.com/linksys/board/message?board.id=Switches&message.id=4273&query.id=27...

  • ATA 186 needs assistance configuring to work with SIP

    Hello. Just got ATA 186. I would like to use it as SIP FXS. I already have FXO with the POTS plugged in. I don't want o use the gateway or the gatekeeper. I would like to configure it to be IP dialing. II am running SIP image ATA030201SIP050616A.zup. Any help is greatly appreciated.
    George

    Hello, already replied in another thread, please do not open duplicates.

Maybe you are looking for