Ata software reset..question
I get the error ata1 software reset failed (device not ready) There is a lot of talk
about this bug all over google. Reading the gentoo forums it seems it is an error
with pmp in the kernel which is sata port multiplyer, which allows for daisy chaining sata ports
like you can with a usb hub. If you configure the kernel without this support the error goes away.
So my question is, is there a way to go into the kernel that is installed with installation and do a
make menuconfig on this kernel?? ( didnt have much time to research this just looking for a quick answer
im at work )
No, you'll need to reconfigure and recompile the kernel from ABS.
http://wiki.archlinux.org/index.php/Ker … n_with_ABS
Do you know what to change in the config to disable this feature? I have had ata1 software reset + emask timeout problems with a DVD burner and this may be the solution. And it seems there are several using Arch who are having this problem as well.
Could you post a link to the gentoo thread as well?
Similar Messages
-
hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail
New mail that I want is [email protected]
Alternative to the Old oneFrom King Penguin
If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) -
my password
i have another account and my ipad with this account and the password i forget it and the reset question help me my ipad need active to open and i know my account name
-
Encryption algrothim used for Password reset question and answer
We are trying to write a custom interface to the Password reset service.
The interface is supposed to allow the user to enter a question and answer, then using SAM SDK write the value to the iplanet-am-user-password-reset-question-answer.
The problem is SAM saves the values encrypted, so do any one know the encryption algorithm used and what is key or they are specified.
ThnaksOnly you and Apple know your secret question. See if changing the password via email will allow access to your account.. Then you can chnag yur secret question. See:
http://support.apple.com/kb/HE36 -
Hi everybody,
I'm still relatively green in the computer world, so, I'm sure these questions are way to "rookie" for you. Nevertheless; here they are.
Software Update Questions:
1. What is J2SE 5.0 Release 4, version 4.0 (39.3 MB) and, is it necessary to install?
2. What is X11 Update 2006, version 1.1.2 (51.0 MB) and, is it necessary to install?
In case you need to know, I have Mac OS X (10.4.8) with a Verizon FIOS connection.
Thanks,
Wayhun
iMac Mac OS X (10.4.8)J2SE 5.0 is the latest version of Java. Mac OS X originally ships with Java 1.4 and this gives you the opportunity to upgrade to the latest version.
It's an optional upgrade since there are many changes between Java 1.4 and java 5, so some people might prefer to hold off until they've verified their Java apps work with the new version. For most people, though, it isn't an issue.
X11 (also known as XWindows) is a standard GUI interface for Unix systems. If you're using X11 you'd probably alredy know about it and therefore wouldn't be asking this question. It's not going to cause any problems if you update it, but it won't offer any advantage unless you're running X11-based applications. -
After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset of the phone WITHOUT success. Is there something more to it? If not learn hardly be any more iPhone for me. Really disappointed. Grateful for help!
If you have tried all of the steps in this support document http://support.apple.com/kb/TS1559 and have completed all of the user troubleshooting, restart, reset, restore from backup, restore as new, then make an appointment with the Apple store to have the hardware checked.
-
what should i do if i can't remember my security question's answer because i do not have a safety email for apple to send the reset question/answer link? my safety email got deleted
Your only option will be to contact iTunes Store support and see if they can help you. Click on this link and choose the Account Management option, and create a new case with iTunes Support.
Good luck! -
Restoring apps to iphone 4 after software reset
How do I restore my apps and music after I do a software reset on my iPhone 4. All the other data is there but the music and apps. Where can i get those back from? They did not appear after I restored.
Are your apps in itunes on your computer?
If not, then they cannot be restored as you do not have them on your computer.
Apps/music are not part of the backup that itunes performs when syncing. -
Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?
Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute). -
Do not give up to reset questions
Do not give up to reset questions.
Nuttapon maartlerd wrote:
Do not give up to reset questions.
1) Apple ID: All about Apple ID security questions
If necessary...
2) See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
3) Or Email Here > Apple Support iTunes Store Contact -
i have forgotten my security question answers,i clickthe link to reset questions to my email address(done this about 20 times) no mail sent back by apple i want to make purchases but cannot
Reset security questions
http://support.apple.com/kb/HT5312
If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
https://ssl.apple.com/emea/support/itunes/contact.html -
My Apple ID asks for answers to security questions which I never input. I have searched how to reset my security questions and have found that the option below where your answers are to be input to reset questions does not exist on my iPhone 5c
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114119) -
Zynq(zedboard) Linux Software Resetting Programmable Logic alone
Hi Community,
I am working with the Digilent Zedboard .
I am trying to software reset the whole programmable logic(which uses FCLK_RESET0_N) from Linux.
I found that we can do it through the SLCR(System Level control Registers) and found slcr.c Platform driver(in linux-xlnx/arch/arm/mach-zynq) precompiled in the kernel which has xslcr_reset_periph() function to reset a peripheral.
I can see an entry for the slcr in the device tree and also see it in
/sys/class/xslcr_reset/fpga0_out
/sys/devices/amba.0/f8000000.ps7-slcr/xslcr_reset/fpga0_out/
I dont seem to have an entry in /dev though
How do I use this driver to perform a reset? Can I do it with a simple 'echo ' as shown for the power management driver in http://www.wiki.xilinx.com/Zynq+Power+Management ?
echo enabled > /sys/devices/amba.0/e0001000.serial/tty/ttyPS0/power
echo (rising|falling|both) > /sys/class/gpio/gpio<n>/edge
or Do I need to write a character device driver that communicates to the platform driver for this? ..Thanks in advance !I agree with this completely. The functionality is there, and it seems silly to burn a GPIO pin to recreate it.
The base address to the SLCRs (according to the slcr definition in my devicetree, check yours for 'ps7-slcr') is 0xf80000. According to slcr.c, the offset for the FPGA reset lines 0x240. This gives you some options.
Here are 3 ways to do what you'd like:
1) /sbin/devmem 0xf8000240 32 0xF // resets ALL lines, 0x1 is RESET0, 0x2 RESET1 0x3 RESET0+RESET1
Be sure to write 0xf8000240 to 0x0 to bring it out of reset!
2) mmap /dev/mem and write it in C
3) (untested) change the devicetree "compatible" property to include "uio_pdrv_genirq" with a fake IRQ or modify uio_pdrv.c to read the compatible property. In either case, this lets you use the UIO system to access these registers from userspace (see http://fpgacpu.wordpress.com/2013/05/28/how-to-design-and-access-a-memory-mapped-device-part-two/).
Keep in mind that, at least with 14.7 kernel, you DO NOT need to recompile your kernel unless you modify uio_pdrv.c If you use the "fake" IRQ solution, it already comes in the stock kernel.
Hope this helps!
-
I can't reset my security questions and answers. Every time I try to have the reset link sent to my rescue address all it does is ask me to verify the email. I keep doing this and still it wont give me access to the reset questions. Anyone know what else to try?
Jaisah 2nd gen ipod touch wrote:
... All I want to do is reset my security questions because I created my account about 7 years ago and I cant remember the answers ...
Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers. -
I want reset question security ,NOW.how I can do
I want reset question security ,NOW.how I can do
Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions.
(106589)
Maybe you are looking for
-
Can this new service of itunes/match allow you to retrieve songs from an older style ipod, store them in match, and then download them onto a new computer/itunes? The original computer that contained these songs has since been replaced b/c it broke
-
HT1386 Can I delete an Apple ID from my iPhone and use another one instead?
I have used a family member's Apple ID and now I have my own and would like to sync my iPhone with my new ID. Can I do that and keep the apps I have already downloaded? They are all free apps but I can get them again if needed. I just need to know
-
Silent startup for 2600 Classic
Is there any way to prevent my Nokia 2600 Classic from playing an infurating tune every time I turn it on? I've managed to find set-up functions to eliminate other annoying noises, such as the bip every time I press a key, but failed to find a way to
-
I have a Mac Pro Dual-Core Intel Xeon that tells me its start up disk is full, which was a surprise because I store almost all of my data on external drives. Through 'WhatSize' I discovered that a big chunk of the memory is being used 'asl' logs loca
-
What would be the best way or how would you get a zoom fly-by effect for the text titles seen in the intro video on this page? http://www.apple.com/finalcutstudio/tutorials/