ATA100 drives on the ATA66 interface???
Hi - I'm sure this has been asked, but could not find a definitive answer either within the forum or by Googling....
Can you put an ATA100 hard drive in the front bay that is supported by ATA66 interfaces?
I made the assumption you could and had success on drive recognition, formating, and limited usage. What I mean by limited is that I think this drive is causing my system to crash and sometimes the drive just drops off. Plus - lots of weird 'drive' noises are coming from the computer. The drive is old, so it could be dying, but wanted to eliminate the 66 vs 100 theory.
Thanks
jc
John,
There's shouldn't be any issues. Drives are nearly always backwards compatible with the older standards.
But check that the drive is connected properly and securely, and that it is configured properly. Master, Slave, or Cable Select ? Where is it on the ribbon ? on the middle connector ? or end connector ? Is there another drive on the ribbon ?
How old is the drive ? Is it ATA/100 ? we could make an educated guess from the capacity.
Similar Messages
-
I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?
In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary. -
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
5 second delay when bringing up the SATA interface (HP dm1-3100ev)
Hello everyone,
I am using ArchLinux on a HP dm1-3100ev (aka dm1z). This little machine is equipped with an 80GB Intel X25-M SSD (2nd gen) and boots and runs nice and fast.
However, I just noticed a curious issue, where the SATA interface takes 5.3 seconds to appear. According to dmesg:
dmesg wrote:[ 1.510296] Switching to clocksource tsc
[ 6.856991] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.857578] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 6.857585] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.858264] ata1.00: configured for UDMA/133
[ 6.858756] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 6.871132] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 6.871271] sd 0:0:0:0: [sda] Write Protect is off
[ 6.871276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.871320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.872158] sda: sda1
[ 6.873464] sd 0:0:0:0: [sda] Attached SCSI disk
This is on linux 2.6.39. Anyone have any ideas why this is and how I can reduce this delay? This is by far the slowest part of the boot sequence right now!
Full dmesg log below:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 6 22:37:55 CEST 2011
[ 0.000000] Command line: root=/dev/disk/by-uuid/3e8701ef-e777-4352-a42c-83dd9f68240a ro nomodeset quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfa3f000 (usable)
[ 0.000000] BIOS-e820: 00000000dfa3f000 - 00000000dfabf000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfabf000 - 00000000dfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
[ 0.000000] BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000187000000 (usable)
[ 0.000000] BIOS-e820: 0000000187000000 - 000000019f000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dm1 Notebook PC /1611, BIOS F.12 04/26/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x187000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFEBD000 mask FFFFFF000 uncachable
[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000019f000000 aka 6640M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dff00000 page 4k
[ 0.000000] kernel direct mapping tables up to dff00000 @ dfefd000-dff00000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000187000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 0187000000 page 2M
[ 0.000000] kernel direct mapping tables up to 187000000 @ 186ffe000-187000000
[ 0.000000] RAMDISK: 37e47000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000dfef5120 00064 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000dfef4000 000F4 (v04 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000dfee7000 0972F (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000dfc96000 00040
[ 0.000000] ACPI: HPET 00000000dfef3000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000dfef2000 00084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000dfef1000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000dfee6000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000dfee5000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000dfee4000 003DE (v01 HP INSYDE 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dfee2000 012FA (v02 HP INSYDE 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000187000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000187000000
[ 0.000000] NODE_DATA [0000000186ff9000 - 0000000186ffdfff]
[ 0.000000] [ffffea0000000000-ffffea00055fffff] PMD -> [ffff880180c00000-ffff880185bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00187000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfa3f
[ 0.000000] 0: 0x000dfef6 -> 0x000dff00
[ 0.000000] 0: 0x00100000 -> 0x00187000
[ 0.000000] On node 0 totalpages: 1468888
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 897665 pages, LIFO batch:31
[ 0.000000] Normal zone: 7560 pages used for memmap
[ 0.000000] Normal zone: 545400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfa3f000 - 00000000dfabf000
[ 0.000000] PM: Registered nosave memory: 00000000dfabf000 - 00000000dfebf000
[ 0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef6000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880186c00000 s83136 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1446987
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/3e8701ef-e777-4352-a42c-83dd9f68240a ro nomodeset quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5715728k/6406144k available (4022k kernel code, 530592k absent, 159824k reserved, 3332k data, 724k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 47185920 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.101 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.21 BogoMIPS (lpj=5320336)
[ 0.003347] pid_max: default: 32768 minimum: 301
[ 0.003562] Security Framework initialized
[ 0.003572] AppArmor: AppArmor disabled by boot time parameter
[ 0.005092] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012089] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014996] Mount-cache hash table entries: 256
[ 0.015789] Initializing cgroup subsys ns
[ 0.015797] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.015802] Initializing cgroup subsys cpuacct
[ 0.015866] Initializing cgroup subsys memory
[ 0.015901] Initializing cgroup subsys devices
[ 0.015905] Initializing cgroup subsys freezer
[ 0.015908] Initializing cgroup subsys net_cls
[ 0.015911] Initializing cgroup subsys blkio
[ 0.016009] tseg: 00dff00000
[ 0.016014] CPU: Physical Processor ID: 0
[ 0.016016] CPU: Processor Core ID: 0
[ 0.016019] mce: CPU supports 6 MCE banks
[ 0.018003] ACPI: Core revision 20110316
[ 0.026713] ftrace: allocating 15966 entries in 63 pages
[ 0.030133] Setting APIC routing to flat
[ 0.030496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064116] CPU0: AMD E-350 Processor stepping 00
[ 0.066663] Performance Events: AMD PMU driver.
[ 0.066663] ... version: 0
[ 0.066663] ... bit width: 48
[ 0.066663] ... generic registers: 4
[ 0.066663] ... value mask: 0000ffffffffffff
[ 0.066663] ... max period: 00007fffffffffff
[ 0.066663] ... fixed-purpose events: 0
[ 0.066663] ... event mask: 000000000000000f
[ 0.083498] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.110105] Booting Node 0, Processors #1
[ 0.110114] smpboot cpu 1: start_ip = 9a000
[ 0.206704] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.213374] Brought up 2 CPUs
[ 0.213387] Total of 2 processors activated (6386.16 BogoMIPS).
[ 0.213856] devtmpfs: initialized
[ 0.217207] PM: Registering ACPI NVS region at dfabf000 (4194304 bytes)
[ 0.218611] print_constraints: dummy:
[ 0.218770] NET: Registered protocol family 16
[ 0.219087] Extended Config Space enabled on 0 nodes
[ 0.219123] ACPI: bus type pci registered
[ 0.220109] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.220115] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.230714] PCI: Using configuration type 1 for base access
[ 0.231511] bio: create slab <bio-0> at 0
[ 0.234922] ACPI: EC: Look up EC in DSDT
[ 0.237245] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.241929] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.253590] ACPI: Interpreter enabled
[ 0.253602] ACPI: (supports S0 S3 S4 S5)
[ 0.253650] ACPI: Using IOAPIC for interrupt routing
[ 0.294296] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.294593] ACPI: No dock devices found.
[ 0.294598] HEST: Table not found.
[ 0.294604] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.303828] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304172] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.304177] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.304182] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.304186] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.304190] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.304194] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.304198] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.304202] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.304206] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.304210] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.304214] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.304218] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.304222] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.304226] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.304230] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.304234] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.304238] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xffffffff]
[ 0.304265] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.304322] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.304337] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.304347] pci 0000:00:01.0: reg 14: [io 0x3000-0x30ff]
[ 0.304357] pci 0000:00:01.0: reg 18: [mem 0xf0200000-0xf023ffff]
[ 0.304404] pci 0000:00:01.0: supports D1 D2
[ 0.304435] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.304448] pci 0000:00:01.1: reg 10: [mem 0xf0244000-0xf0247fff]
[ 0.304506] pci 0000:00:01.1: supports D1 D2
[ 0.304585] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[ 0.304645] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.304651] pci 0000:00:04.0: PME# disabled
[ 0.304684] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.304743] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.304748] pci 0000:00:05.0: PME# disabled
[ 0.304811] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.304838] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f]
[ 0.304852] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127]
[ 0.304866] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117]
[ 0.304880] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123]
[ 0.304893] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f]
[ 0.304907] pci 0000:00:11.0: reg 24: [mem 0xf024e000-0xf024e3ff]
[ 0.304971] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.304990] pci 0000:00:12.0: reg 10: [mem 0xf024d000-0xf024dfff]
[ 0.305084] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.305790] pci 0000:00:12.2: reg 10: [mem 0xf024c000-0xf024c0ff]
[ 0.309643] pci 0000:00:12.2: supports D1 D2
[ 0.309653] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.309661] pci 0000:00:12.2: PME# disabled
[ 0.309703] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.309726] pci 0000:00:13.0: reg 10: [mem 0xf024b000-0xf024bfff]
[ 0.310052] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.310717] pci 0000:00:13.2: reg 10: [mem 0xf024a000-0xf024a0ff]
[ 0.314283] pci 0000:00:13.2: supports D1 D2
[ 0.314293] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.314302] pci 0000:00:13.2: PME# disabled
[ 0.314343] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.314451] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.314483] pci 0000:00:14.2: reg 10: [mem 0xf0240000-0xf0243fff 64bit]
[ 0.314560] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.314567] pci 0000:00:14.2: PME# disabled
[ 0.314600] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.314701] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.314764] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.314784] pci 0000:00:16.0: reg 10: [mem 0xf0249000-0xf0249fff]
[ 0.314878] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.315565] pci 0000:00:16.2: reg 10: [mem 0xf0248000-0xf02480ff]
[ 0.319593] pci 0000:00:16.2: supports D1 D2
[ 0.319602] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.319611] pci 0000:00:16.2: PME# disabled
[ 0.319653] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.319704] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.319747] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.320021] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.320088] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.320131] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.320174] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.320216] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.320338] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.320359] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.320392] pci 0000:01:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.320412] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.320466] pci 0000:01:00.0: supports D1 D2
[ 0.320470] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.320477] pci 0000:01:00.0: PME# disabled
[ 0.326731] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.326751] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.326762] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.326771] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.326884] pci 0000:02:00.0: [1814:539f] type 0 class 0x000280
[ 0.326908] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf010ffff]
[ 0.333424] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.333437] pci 0000:00:05.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.333445] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.333454] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.333600] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.333607] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.333615] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.333622] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.333627] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.333631] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.333636] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.333640] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.333645] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.333649] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.333653] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[ 0.333657] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.333662] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.333666] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.333670] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.333675] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.333679] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.333683] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.333688] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.333692] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.333696] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
[ 0.333730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.333965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.334034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.334166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.334455] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.334981] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.346082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346353] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346488] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346714] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346789] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.347047] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.347068] vgaarb: loaded
[ 0.347225] PCI: Using ACPI for IRQ routing
[ 0.347231] PCI: pci_cache_line_size set to 64 bytes
[ 0.347435] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.347439] reserve RAM buffer: 00000000dfa3f000 - 00000000dfffffff
[ 0.347444] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
[ 0.347447] reserve RAM buffer: 0000000187000000 - 0000000187ffffff
[ 0.347671] NetLabel: Initializing
[ 0.347675] NetLabel: domain hash size = 128
[ 0.347677] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.347700] NetLabel: unlabeled traffic allowed by default
[ 0.347731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.347738] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.349771] Switching to clocksource hpet
[ 0.349869] Switched to NOHz mode on CPU #1
[ 0.350046] Switched to NOHz mode on CPU #0
[ 0.357491] pnp: PnP ACPI init
[ 0.357525] ACPI: bus type pnp registered
[ 0.357763] pnp 00:00: [bus 00-ff]
[ 0.357768] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.357772] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.357777] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.357781] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.357785] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.357789] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.357793] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.357797] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.357800] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.357804] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.357808] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.357811] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.357815] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.357818] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.357822] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.357826] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.357829] pnp 00:00: [mem 0xfc000000-0xffffffff window]
[ 0.357833] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.357945] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.358035] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.358039] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.358135] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.358141] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.358147] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358359] pnp 00:02: [irq 0 disabled]
[ 0.358392] pnp 00:02: [irq 8]
[ 0.358396] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.358441] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.358562] pnp 00:03: [io 0x0000-0x000f]
[ 0.358566] pnp 00:03: [io 0x0081-0x008f]
[ 0.358570] pnp 00:03: [io 0x00c0-0x00df]
[ 0.358574] pnp 00:03: [dma 4]
[ 0.358630] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.358647] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.358671] pnp 00:04: [irq 13]
[ 0.358734] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358812] pnp 00:05: [io 0x0070-0x0071]
[ 0.358869] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358889] pnp 00:06: [io 0x0060]
[ 0.358892] pnp 00:06: [io 0x0064]
[ 0.358901] pnp 00:06: [irq 1]
[ 0.358958] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.358979] pnp 00:07: [irq 12]
[ 0.359045] pnp 00:07: Plug and Play ACPI device, IDs SYN1e3b SYN1e00 SYN0002 PNP0f13 (active)
[ 0.359066] pnp 00:08: [io 0x0010-0x001f]
[ 0.359069] pnp 00:08: [io 0x002e-0x002f]
[ 0.359072] pnp 00:08: [io 0x0072-0x0073]
[ 0.359075] pnp 00:08: [io 0x0080]
[ 0.359078] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.359081] pnp 00:08: [io 0x0092]
[ 0.359084] pnp 00:08: [io 0x0400-0x04cf]
[ 0.359088] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.359091] pnp 00:08: [io 0x04d6]
[ 0.359094] pnp 00:08: [io 0x0680-0x06ff]
[ 0.359097] pnp 00:08: [io 0x077a]
[ 0.359100] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.359102] pnp 00:08: [io 0x0c14]
[ 0.359106] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.359109] pnp 00:08: [io 0x0c6c]
[ 0.359111] pnp 00:08: [io 0x0c6f]
[ 0.359114] pnp 00:08: [io 0x0cd0-0x0cdb]
[ 0.359216] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.359221] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.359225] system 00:08: [io 0x04d6] has been reserved
[ 0.359230] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.359234] system 00:08: [io 0x077a] has been reserved
[ 0.359238] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.359242] system 00:08: [io 0x0c14] has been reserved
[ 0.359246] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.359251] system 00:08: [io 0x0c6c] has been reserved
[ 0.359255] system 00:08: [io 0x0c6f] has been reserved
[ 0.359259] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 0.359265] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359348] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.359353] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.359450] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.359456] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.359462] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.361159] pnp 00:0a: [irq 23]
[ 0.361298] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.361323] pnp: PnP ACPI: found 11 devices
[ 0.361326] ACPI: ACPI bus type pnp unregistered
[ 0.369286] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.369294] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.369300] pci 0000:00:04.0: bridge window [mem disabled]
[ 0.369307] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.369315] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.369318] pci 0000:00:05.0: bridge window [io disabled]
[ 0.369325] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.369330] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.369337] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.369340] pci 0000:00:14.4: bridge window [io disabled]
[ 0.369362] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.369368] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.369400] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.369408] pci 0000:00:04.0: setting latency timer to 64
[ 0.369422] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.369428] pci 0000:00:05.0: setting latency timer to 64
[ 0.369440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.369444] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.369448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.369452] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.369456] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.369460] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.369464] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.369468] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.369472] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.369476] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.369480] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.369484] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.369487] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.369491] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.369495] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.369499] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.369503] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xffffffff]
[ 0.369507] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.369512] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.369516] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.369520] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.369524] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.369528] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.369532] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.369535] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.369539] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.369543] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.369547] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.369551] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.369555] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.369559] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.369562] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.369566] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.369570] pci_bus 0000:03: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.369574] pci_bus 0000:03: resource 18 [mem 0x000ec000-0x000effff]
[ 0.369578] pci_bus 0000:03: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.369582] pci_bus 0000:03: resource 20 [mem 0xfc000000-0xffffffff]
[ 0.369723] NET: Registered protocol family 2
[ 0.370245] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.373075] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.378850] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.379526] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.379531] TCP reno registered
[ 0.379569] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.379687] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.380300] NET: Registered protocol family 1
[ 0.380331] pci 0000:00:01.0: Boot video device
[ 0.460342] PCI: CLS 64 bytes, default 64
[ 0.460446] Unpacking initramfs...
[ 0.505657] Freeing initrd memory: 1700k freed
[ 0.506819] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.506828] Placing 64MB software IO TLB between ffff8800dba3f000 - ffff8800dfa3f000
[ 0.506832] software IO TLB at phys 0xdba3f000 - 0xdfa3f000
[ 0.506921] Simple Boot Flag at 0x44 set to 0x1
[ 0.507647] audit: initializing netlink socket (disabled)
[ 0.507672] type=2000 audit(1308931391.506:1): initialized
[ 0.509016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.513968] VFS: Disk quotas dquot_6.5.2
[ 0.514241] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.514554] msgmni has been set to 11166
[ 0.515475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.515770] io scheduler noop registered
[ 0.515778] io scheduler deadline registered
[ 0.515922] io scheduler cfq registered (default)
[ 0.516411] ERST: Table is not found!
[ 0.516539] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.740924] Linux agpgart interface v0.103
[ 0.741073] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.747470] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.747529] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.747687] mousedev: PS/2 mouse device common for all mice
[ 0.747867] rtc_cmos 00:05: RTC can wake from S4
[ 0.753544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.767132] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.767186] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.767213] cpuidle: using governor ladder
[ 0.767217] cpuidle: using governor menu
[ 0.767576] TCP cubic registered
[ 0.767581] NET: Registered protocol family 17
[ 0.767593] Registering the dns_resolver key type
[ 0.767764] PM: Hibernation image not present or could not be loaded.
[ 0.767778] registered taskstats version 1
[ 0.768843] rtc_cmos 00:05: setting system clock to 2011-06-24 16:03:12 UTC (1308931392)
[ 0.768918] Initializing network drop monitor service
[ 0.771516] Freeing unused kernel memory: 724k freed
[ 0.771916] Write protecting the kernel read-only data: 6144k
[ 0.772631] Freeing unused kernel memory: 56k freed
[ 0.777964] Freeing unused kernel memory: 784k freed
[ 0.815303] udevd[59]: starting version 171
[ 0.987592] SCSI subsystem initialized
[ 1.022258] libata version 3.00 loaded.
[ 1.036343] ahci 0000:00:11.0: version 3.0
[ 1.036385] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.036532] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.036539] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.037084] scsi0 : ahci
[ 1.037252] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 19
[ 1.510277] Refined TSC clocksource calibration: 1596.003 MHz.
[ 1.510296] Switching to clocksource tsc
[ 6.856991] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.857578] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 6.857585] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.858264] ata1.00: configured for UDMA/133
[ 6.858756] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 6.871132] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 6.871271] sd 0:0:0:0: [sda] Write Protect is off
[ 6.871276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.871320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.872158] sda: sda1
[ 6.873464] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.051357] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.707862] udevd[230]: starting version 171
[ 7.759090] ACPI: acpi_idle registered with cpuidle
[ 7.766584] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 7.766662] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 7.766699] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 7.766703] powernow-k8: 2 : pstate 2 (800 MHz)
[ 7.798328] rt5390 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.798437] rt5390 0000:02:00.0: setting latency timer to 64
[ 7.798971] <-- RTMPAllocAdapterBlock, Status=0
[ 7.860369] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.860383] ACPI: Power Button [PWRB]
[ 7.860558] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 7.861604] ACPI: Lid Switch [LID]
[ 7.861751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.861761] ACPI: Power Button [PWRF]
[ 7.897248] vboxdrv: Found 2 processor cores.
[ 7.897357] VBoxDrv: dbg - g_abExecMemory=ffffffffa0276360
[ 7.897405] vboxdrv: fAsync=0 offMin=0x35d offMax=0xcf6
[ 7.897484] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 7.897488] vboxdrv: Successfully loaded version 4.0.8_OSE (interface 0x00180000).
[ 7.932205] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 7.934073] ACPI: AC Adapter [AC] (off-line)
[ 7.934370] wmi: Mapper loaded
[ 7.961127] acpi device:02: registered as cooling_device2
[ 7.961272] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 7.961285] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.003256] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 8.003495] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 8.014954] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20110316/nspredef-456)
[ 8.014969] ACPI: [Package] has zero elements (ffff88017c138cc0)
[ 8.014973] ACPI: Invalid active0 threshold
[ 8.025488] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.025495] ACPI: Thermal Zone [THRM] (52 C)
[ 8.044849] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 8.044866] ACPI: Battery Slot [BAT0] (battery present)
[ 8.076882] hp_accel: laptop model unknown, using default axes configuration
[ 8.109541] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.112918] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.112984] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.113075] r8169 0000:01:00.0: setting latency timer to 64
[ 8.113083] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[ 8.113141] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 8.113883] r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc90000c34000, 68:b5:99:e1:fa:b1, XID 0c200000 IRQ 40
[ 8.145250] usbcore: registered new interface driver usbfs
[ 8.145307] usbcore: registered new interface driver hub
[ 8.146258] usbcore: registered new device driver usb
[ 8.147469] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.211672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.211773] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.211870] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 8.211878] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 8.211930] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 8.226790] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 8.226839] QUIRK: Enable AMD PLL fix
[ 8.226874] ehci_hcd 0000:00:12.2: debug port 1
[ 8.226916] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf024c000
[ 8.236710] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 8.237083] hub 1-0:1.0: USB hub found
[ 8.237094] hub 1-0:1.0: 5 ports detected
[ 8.237272] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.237336] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 8.237342] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 8.237361] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 8.246722] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 8.246777] ehci_hcd 0000:00:13.2: debug port 1
[ 8.246803] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf024a000
[ 8.255280] [drm] Initialized drm 1.1.0 20060810
[ 8.256809] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 8.257138] hub 2-0:1.0: USB hub found
[ 8.257148] hub 2-0:1.0: 5 ports detected
[ 8.257353] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.257432] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 8.257438] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 8.257456] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 8.266735] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 8.266794] ehci_hcd 0000:00:16.2: debug port 1
[ 8.266822] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0248000
[ 8.280083] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 8.280419] hub 3-0:1.0: USB hub found
[ 8.280429] hub 3-0:1.0: 4 ports detected
[ 8.299920] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 8.368162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.368219] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.368296] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 8.368303] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 8.368334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 8.383583] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf024d000
[ 8.438348] [drm] VGACON disable radeon kernel modesetting.
[ 8.439661] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.439670] pci 0000:00:01.0: setting latency timer to 64
[ 8.440157] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.440162] [drm] No driver support for vblank timestamp query.
[ 8.440168] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
[ 8.441308] hub 4-0:1.0: USB hub found
[ 8.441368] hub 4-0:1.0: 5 ports detected
[ 8.441720] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.441833] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 8.441841] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 8.441860] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 8.456856] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf024b000
[ 8.477927] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.477937] Disabling lock debugging due to kernel taint
[ 8.514652] hub 5-0:1.0: USB hub found
[ 8.514713] hub 5-0:1.0: 5 ports detected
[ 8.514902] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.515007] HDA Intel 0000:00:01.1: irq 41 for MSI/MSI-X
[ 8.515044] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 8.534738] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.534853] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 8.566706] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 8.583897] [fglrx] Maximum main memory to use for locked dma buffers: 5393 MBytes.
[ 8.583979] [fglrx] vendor: 1002 device: 9802 count: 1
[ 8.584734] [fglrx] ioport: bar 1, base 0x3000, size: 0x100
[ 8.584748] pci 0000:00:01.0: setting latency timer to 64
[ 8.585495] [fglrx] Kernel PAT support is enabled
[ 8.585539] [fglrx] module loaded - fglrx 8.86.5 [May 24 2011] with 1 minors
[ 8.598000] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 8.614292] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 8.614454] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 8.614783] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.614861] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 8.614869] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 8.614900] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 8.623464] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0249000
[ 8.681124] hub 6-0:1.0: USB hub found
[ 8.681137] hub 6-0:1.0: 4 ports detected
[ 8.892947] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 8.940407] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 9.016651] lis3lv02d: 8 bits 3DC sensor found
[ 9.403986] Linux media interface: v0.10
[ 9.420636] Linux video capture interface: v2.00
[ 9.429080] uvcvideo: Found UVC 1.00 device HP Webcam-101 (174f:112b)
[ 9.455290] input: HP Webcam-101 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input10
[ 9.455419] usbcore: registered new interface driver uvcvideo
[ 9.455423] USB Video Class driver (v1.0.0)
[ 9.460103] usb 2-2: new high speed USB device number 3 using ehci_hcd
[ 9.960350] usb 6-1: new full speed USB device number 2 using ohci_hcd
[ 10.246250] Bluetooth: Core ver 2.16
[ 10.246292] NET: Registered protocol family 31
[ 10.246295] Bluetooth: HCI device and connection manager initialized
[ 10.246300] Bluetooth: HCI socket layer initialized
[ 10.246303] Bluetooth: L2CAP socket layer initialized
[ 10.250254] Bluetooth: SCO socket layer initialized
[ 10.265755] Initializing USB Mass Storage driver...
[ 10.265954] usbcore: registered new interface driver usb-storage
[ 10.265957] USB Mass Storage support registered.
[ 10.270760] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.271722] usbcore: registered new interface driver btusb
[ 10.288479] scsi1 : usb-storage 2-2:1.0
[ 10.288755] usbcore: registered new interface driver ums-realtek
[ 10.293708] usbcore: registered new interface driver uas
[ 10.430407] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
[ 10.430745] Registered led device: hp::hddprotect
[ 10.430769] hp_accel: driver loaded
[ 10.526540] EXT4-fs (sda1): re-mounted. Opts: discard
[ 11.289737] scsi 1:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.290445] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 11.312911] fuse init (API version 7.16)
[ 11.519361] r8169 0000:01:00.0: eth0: link down
[ 11.527370] KH: Use High Memory for Beacon
[ 11.531213] <-- RTMPAllocTxRxRingMemory, Status=0
[ 11.588181] <==== rt28xx_init, Status=0
[ 11.588301] 0x1300 = 00064300
[ 12.021213] sd 1:0:0:0: [sdb] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 12.023162] sd 1:0:0:0: [sdb] Write Protect is off
[ 12.023168] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 12.023172] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 12.025360] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 12.027256] sdb: sdb1
[ 12.031613] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 12.031628] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 12.486029] fglrx_pci 0000:00:01.0: irq 42 for MSI/MSI-X
[ 12.486918] [fglrx] Firegl kernel thread PID: 779
[ 12.486999] [fglrx] Firegl kernel thread PID: 780
[ 12.487080] [fglrx] Firegl kernel thread PID: 781
[ 12.487290] [fglrx] IRQ 42 Enabled
[ 12.612000] [fglrx] Gart USWC size:1280 M.
[ 12.612007] [fglrx] Gart cacheable size:508 M.
[ 12.612017] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 12.612021] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 12.612025] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 25.342715] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
[ 39.000090] NET: Registered protocol family 10
[ 39.001989] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.648846] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.Hello everyone,
I am using ArchLinux on a HP dm1-3100ev (aka dm1z). This little machine is equipped with an 80GB Intel X25-M SSD (2nd gen) and boots and runs nice and fast.
However, I just noticed a curious issue, where the SATA interface takes 5.3 seconds to appear. According to dmesg:
dmesg wrote:[ 1.510296] Switching to clocksource tsc
[ 6.856991] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.857578] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 6.857585] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.858264] ata1.00: configured for UDMA/133
[ 6.858756] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 6.871132] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 6.871271] sd 0:0:0:0: [sda] Write Protect is off
[ 6.871276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.871320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.872158] sda: sda1
[ 6.873464] sd 0:0:0:0: [sda] Attached SCSI disk
This is on linux 2.6.39. Anyone have any ideas why this is and how I can reduce this delay? This is by far the slowest part of the boot sequence right now!
Full dmesg log below:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 6 22:37:55 CEST 2011
[ 0.000000] Command line: root=/dev/disk/by-uuid/3e8701ef-e777-4352-a42c-83dd9f68240a ro nomodeset quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfa3f000 (usable)
[ 0.000000] BIOS-e820: 00000000dfa3f000 - 00000000dfabf000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfabf000 - 00000000dfebf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
[ 0.000000] BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000187000000 (usable)
[ 0.000000] BIOS-e820: 0000000187000000 - 000000019f000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dm1 Notebook PC /1611, BIOS F.12 04/26/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x187000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFEBD000 mask FFFFFF000 uncachable
[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000019f000000 aka 6640M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dff00000 page 4k
[ 0.000000] kernel direct mapping tables up to dff00000 @ dfefd000-dff00000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000187000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 0187000000 page 2M
[ 0.000000] kernel direct mapping tables up to 187000000 @ 186ffe000-187000000
[ 0.000000] RAMDISK: 37e47000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000dfef5120 00064 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 00000000dfef4000 000F4 (v04 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000dfee7000 0972F (v01 HP INSYDE F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000dfc96000 00040
[ 0.000000] ACPI: HPET 00000000dfef3000 00038 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000dfef2000 00084 (v02 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000dfef1000 0003C (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000dfee6000 00028 (v01 HP INSYDE 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000dfee5000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000dfee4000 003DE (v01 HP INSYDE 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000dfee2000 012FA (v02 HP INSYDE 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000187000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000187000000
[ 0.000000] NODE_DATA [0000000186ff9000 - 0000000186ffdfff]
[ 0.000000] [ffffea0000000000-ffffea00055fffff] PMD -> [ffff880180c00000-ffff880185bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00187000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfa3f
[ 0.000000] 0: 0x000dfef6 -> 0x000dff00
[ 0.000000] 0: 0x00100000 -> 0x00187000
[ 0.000000] On node 0 totalpages: 1468888
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 897665 pages, LIFO batch:31
[ 0.000000] Normal zone: 7560 pages used for memmap
[ 0.000000] Normal zone: 545400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfa3f000 - 00000000dfabf000
[ 0.000000] PM: Registered nosave memory: 00000000dfabf000 - 00000000dfebf000
[ 0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef6000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880186c00000 s83136 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1446987
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/3e8701ef-e777-4352-a42c-83dd9f68240a ro nomodeset quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5715728k/6406144k available (4022k kernel code, 530592k absent, 159824k reserved, 3332k data, 724k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 47185920 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.101 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.21 BogoMIPS (lpj=5320336)
[ 0.003347] pid_max: default: 32768 minimum: 301
[ 0.003562] Security Framework initialized
[ 0.003572] AppArmor: AppArmor disabled by boot time parameter
[ 0.005092] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012089] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014996] Mount-cache hash table entries: 256
[ 0.015789] Initializing cgroup subsys ns
[ 0.015797] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.015802] Initializing cgroup subsys cpuacct
[ 0.015866] Initializing cgroup subsys memory
[ 0.015901] Initializing cgroup subsys devices
[ 0.015905] Initializing cgroup subsys freezer
[ 0.015908] Initializing cgroup subsys net_cls
[ 0.015911] Initializing cgroup subsys blkio
[ 0.016009] tseg: 00dff00000
[ 0.016014] CPU: Physical Processor ID: 0
[ 0.016016] CPU: Processor Core ID: 0
[ 0.016019] mce: CPU supports 6 MCE banks
[ 0.018003] ACPI: Core revision 20110316
[ 0.026713] ftrace: allocating 15966 entries in 63 pages
[ 0.030133] Setting APIC routing to flat
[ 0.030496] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064116] CPU0: AMD E-350 Processor stepping 00
[ 0.066663] Performance Events: AMD PMU driver.
[ 0.066663] ... version: 0
[ 0.066663] ... bit width: 48
[ 0.066663] ... generic registers: 4
[ 0.066663] ... value mask: 0000ffffffffffff
[ 0.066663] ... max period: 00007fffffffffff
[ 0.066663] ... fixed-purpose events: 0
[ 0.066663] ... event mask: 000000000000000f
[ 0.083498] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.110105] Booting Node 0, Processors #1
[ 0.110114] smpboot cpu 1: start_ip = 9a000
[ 0.206704] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.213374] Brought up 2 CPUs
[ 0.213387] Total of 2 processors activated (6386.16 BogoMIPS).
[ 0.213856] devtmpfs: initialized
[ 0.217207] PM: Registering ACPI NVS region at dfabf000 (4194304 bytes)
[ 0.218611] print_constraints: dummy:
[ 0.218770] NET: Registered protocol family 16
[ 0.219087] Extended Config Space enabled on 0 nodes
[ 0.219123] ACPI: bus type pci registered
[ 0.220109] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.220115] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.230714] PCI: Using configuration type 1 for base access
[ 0.231511] bio: create slab <bio-0> at 0
[ 0.234922] ACPI: EC: Look up EC in DSDT
[ 0.237245] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.241929] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.253590] ACPI: Interpreter enabled
[ 0.253602] ACPI: (supports S0 S3 S4 S5)
[ 0.253650] ACPI: Using IOAPIC for interrupt routing
[ 0.294296] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.294593] ACPI: No dock devices found.
[ 0.294598] HEST: Table not found.
[ 0.294604] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.303828] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304172] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.304177] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.304182] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.304186] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.304190] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.304194] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.304198] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.304202] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.304206] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.304210] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.304214] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.304218] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.304222] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.304226] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.304230] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.304234] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff]
[ 0.304238] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xffffffff]
[ 0.304265] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.304322] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.304337] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.304347] pci 0000:00:01.0: reg 14: [io 0x3000-0x30ff]
[ 0.304357] pci 0000:00:01.0: reg 18: [mem 0xf0200000-0xf023ffff]
[ 0.304404] pci 0000:00:01.0: supports D1 D2
[ 0.304435] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.304448] pci 0000:00:01.1: reg 10: [mem 0xf0244000-0xf0247fff]
[ 0.304506] pci 0000:00:01.1: supports D1 D2
[ 0.304585] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[ 0.304645] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.304651] pci 0000:00:04.0: PME# disabled
[ 0.304684] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
[ 0.304743] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.304748] pci 0000:00:05.0: PME# disabled
[ 0.304811] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.304838] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f]
[ 0.304852] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127]
[ 0.304866] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117]
[ 0.304880] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123]
[ 0.304893] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f]
[ 0.304907] pci 0000:00:11.0: reg 24: [mem 0xf024e000-0xf024e3ff]
[ 0.304971] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.304990] pci 0000:00:12.0: reg 10: [mem 0xf024d000-0xf024dfff]
[ 0.305084] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.305790] pci 0000:00:12.2: reg 10: [mem 0xf024c000-0xf024c0ff]
[ 0.309643] pci 0000:00:12.2: supports D1 D2
[ 0.309653] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.309661] pci 0000:00:12.2: PME# disabled
[ 0.309703] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.309726] pci 0000:00:13.0: reg 10: [mem 0xf024b000-0xf024bfff]
[ 0.310052] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.310717] pci 0000:00:13.2: reg 10: [mem 0xf024a000-0xf024a0ff]
[ 0.314283] pci 0000:00:13.2: supports D1 D2
[ 0.314293] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.314302] pci 0000:00:13.2: PME# disabled
[ 0.314343] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.314451] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.314483] pci 0000:00:14.2: reg 10: [mem 0xf0240000-0xf0243fff 64bit]
[ 0.314560] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.314567] pci 0000:00:14.2: PME# disabled
[ 0.314600] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.314701] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.314764] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.314784] pci 0000:00:16.0: reg 10: [mem 0xf0249000-0xf0249fff]
[ 0.314878] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.315565] pci 0000:00:16.2: reg 10: [mem 0xf0248000-0xf02480ff]
[ 0.319593] pci 0000:00:16.2: supports D1 D2
[ 0.319602] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.319611] pci 0000:00:16.2: PME# disabled
[ 0.319653] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.319704] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.319747] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.320021] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.320088] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.320131] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.320174] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.320216] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.320338] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.320359] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.320392] pci 0000:01:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.320412] pci 0000:01:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.320466] pci 0000:01:00.0: supports D1 D2
[ 0.320470] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.320477] pci 0000:01:00.0: PME# disabled
[ 0.326731] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.326751] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.326762] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.326771] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.326884] pci 0000:02:00.0: [1814:539f] type 0 class 0x000280
[ 0.326908] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf010ffff]
[ 0.333424] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.333437] pci 0000:00:05.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.333445] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.333454] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.333600] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.333607] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.333615] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.333622] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.333627] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.333631] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.333636] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.333640] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.333645] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.333649] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.333653] pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[ 0.333657] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.333662] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.333666] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.333670] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.333675] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.333679] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.333683] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.333688] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.333692] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode)
[ 0.333696] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xffffffff] (subtractive decode)
[ 0.333730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.333965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.334034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.334166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.334455] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.334981] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.346082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346217] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346353] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346488] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346714] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346789] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.346863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.347047] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.347068] vgaarb: loaded
[ 0.347225] PCI: Using ACPI for IRQ routing
[ 0.347231] PCI: pci_cache_line_size set to 64 bytes
[ 0.347435] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.347439] reserve RAM buffer: 00000000dfa3f000 - 00000000dfffffff
[ 0.347444] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
[ 0.347447] reserve RAM buffer: 0000000187000000 - 0000000187ffffff
[ 0.347671] NetLabel: Initializing
[ 0.347675] NetLabel: domain hash size = 128
[ 0.347677] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.347700] NetLabel: unlabeled traffic allowed by default
[ 0.347731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.347738] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.349771] Switching to clocksource hpet
[ 0.349869] Switched to NOHz mode on CPU #1
[ 0.350046] Switched to NOHz mode on CPU #0
[ 0.357491] pnp: PnP ACPI init
[ 0.357525] ACPI: bus type pnp registered
[ 0.357763] pnp 00:00: [bus 00-ff]
[ 0.357768] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.357772] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.357777] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.357781] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.357785] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.357789] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.357793] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.357797] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.357800] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.357804] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.357808] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.357811] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.357815] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.357818] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.357822] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.357826] pnp 00:00: [mem 0xe0000000-0xf7ffffff window]
[ 0.357829] pnp 00:00: [mem 0xfc000000-0xffffffff window]
[ 0.357833] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.357945] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.358035] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.358039] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.358135] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.358141] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.358147] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358359] pnp 00:02: [irq 0 disabled]
[ 0.358392] pnp 00:02: [irq 8]
[ 0.358396] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.358441] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.358562] pnp 00:03: [io 0x0000-0x000f]
[ 0.358566] pnp 00:03: [io 0x0081-0x008f]
[ 0.358570] pnp 00:03: [io 0x00c0-0x00df]
[ 0.358574] pnp 00:03: [dma 4]
[ 0.358630] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.358647] pnp 00:04: [io 0x00f0-0x00fe]
[ 0.358671] pnp 00:04: [irq 13]
[ 0.358734] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358812] pnp 00:05: [io 0x0070-0x0071]
[ 0.358869] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358889] pnp 00:06: [io 0x0060]
[ 0.358892] pnp 00:06: [io 0x0064]
[ 0.358901] pnp 00:06: [irq 1]
[ 0.358958] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.358979] pnp 00:07: [irq 12]
[ 0.359045] pnp 00:07: Plug and Play ACPI device, IDs SYN1e3b SYN1e00 SYN0002 PNP0f13 (active)
[ 0.359066] pnp 00:08: [io 0x0010-0x001f]
[ 0.359069] pnp 00:08: [io 0x002e-0x002f]
[ 0.359072] pnp 00:08: [io 0x0072-0x0073]
[ 0.359075] pnp 00:08: [io 0x0080]
[ 0.359078] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.359081] pnp 00:08: [io 0x0092]
[ 0.359084] pnp 00:08: [io 0x0400-0x04cf]
[ 0.359088] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.359091] pnp 00:08: [io 0x04d6]
[ 0.359094] pnp 00:08: [io 0x0680-0x06ff]
[ 0.359097] pnp 00:08: [io 0x077a]
[ 0.359100] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.359102] pnp 00:08: [io 0x0c14]
[ 0.359106] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.359109] pnp 00:08: [io 0x0c6c]
[ 0.359111] pnp 00:08: [io 0x0c6f]
[ 0.359114] pnp 00:08: [io 0x0cd0-0x0cdb]
[ 0.359216] system 00:08: [io 0x0400-0x04cf] has been reserved
[ 0.359221] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.359225] system 00:08: [io 0x04d6] has been reserved
[ 0.359230] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 0.359234] system 00:08: [io 0x077a] has been reserved
[ 0.359238] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.359242] system 00:08: [io 0x0c14] has been reserved
[ 0.359246] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.359251] system 00:08: [io 0x0c6c] has been reserved
[ 0.359255] system 00:08: [io 0x0c6f] has been reserved
[ 0.359259] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 0.359265] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.359348] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.359353] pnp 00:09: [mem 0xffe00000-0xffffffff]
[ 0.359450] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.359456] system 00:09: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.359462] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.361159] pnp 00:0a: [irq 23]
[ 0.361298] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.361323] pnp: PnP ACPI: found 11 devices
[ 0.361326] ACPI: ACPI bus type pnp unregistered
[ 0.369286] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.369294] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
[ 0.369300] pci 0000:00:04.0: bridge window [mem disabled]
[ 0.369307] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.369315] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.369318] pci 0000:00:05.0: bridge window [io disabled]
[ 0.369325] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.369330] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.369337] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.369340] pci 0000:00:14.4: bridge window [io disabled]
[ 0.369362] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.369368] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.369400] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.369408] pci 0000:00:04.0: setting latency timer to 64
[ 0.369422] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.369428] pci 0000:00:05.0: setting latency timer to 64
[ 0.369440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.369444] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.369448] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.369452] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.369456] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.369460] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.369464] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.369468] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.369472] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.369476] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.369480] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.369484] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.369487] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.369491] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.369495] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.369499] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.369503] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xffffffff]
[ 0.369507] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.369512] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.369516] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.369520] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.369524] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.369528] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.369532] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.369535] pci_bus 0000:03: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.369539] pci_bus 0000:03: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.369543] pci_bus 0000:03: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.369547] pci_bus 0000:03: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.369551] pci_bus 0000:03: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.369555] pci_bus 0000:03: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.369559] pci_bus 0000:03: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.369562] pci_bus 0000:03: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.369566] pci_bus 0000:03: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.369570] pci_bus 0000:03: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.369574] pci_bus 0000:03: resource 18 [mem 0x000ec000-0x000effff]
[ 0.369578] pci_bus 0000:03: resource 19 [mem 0xe0000000-0xf7ffffff]
[ 0.369582] pci_bus 0000:03: resource 20 [mem 0xfc000000-0xffffffff]
[ 0.369723] NET: Registered protocol family 2
[ 0.370245] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.373075] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.378850] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.379526] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.379531] TCP reno registered
[ 0.379569] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.379687] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.380300] NET: Registered protocol family 1
[ 0.380331] pci 0000:00:01.0: Boot video device
[ 0.460342] PCI: CLS 64 bytes, default 64
[ 0.460446] Unpacking initramfs...
[ 0.505657] Freeing initrd memory: 1700k freed
[ 0.506819] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.506828] Placing 64MB software IO TLB between ffff8800dba3f000 - ffff8800dfa3f000
[ 0.506832] software IO TLB at phys 0xdba3f000 - 0xdfa3f000
[ 0.506921] Simple Boot Flag at 0x44 set to 0x1
[ 0.507647] audit: initializing netlink socket (disabled)
[ 0.507672] type=2000 audit(1308931391.506:1): initialized
[ 0.509016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.513968] VFS: Disk quotas dquot_6.5.2
[ 0.514241] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.514554] msgmni has been set to 11166
[ 0.515475] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.515770] io scheduler noop registered
[ 0.515778] io scheduler deadline registered
[ 0.515922] io scheduler cfq registered (default)
[ 0.516411] ERST: Table is not found!
[ 0.516539] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.740924] Linux agpgart interface v0.103
[ 0.741073] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.747470] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.747529] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.747687] mousedev: PS/2 mouse device common for all mice
[ 0.747867] rtc_cmos 00:05: RTC can wake from S4
[ 0.753544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.767132] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.767186] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.767213] cpuidle: using governor ladder
[ 0.767217] cpuidle: using governor menu
[ 0.767576] TCP cubic registered
[ 0.767581] NET: Registered protocol family 17
[ 0.767593] Registering the dns_resolver key type
[ 0.767764] PM: Hibernation image not present or could not be loaded.
[ 0.767778] registered taskstats version 1
[ 0.768843] rtc_cmos 00:05: setting system clock to 2011-06-24 16:03:12 UTC (1308931392)
[ 0.768918] Initializing network drop monitor service
[ 0.771516] Freeing unused kernel memory: 724k freed
[ 0.771916] Write protecting the kernel read-only data: 6144k
[ 0.772631] Freeing unused kernel memory: 56k freed
[ 0.777964] Freeing unused kernel memory: 784k freed
[ 0.815303] udevd[59]: starting version 171
[ 0.987592] SCSI subsystem initialized
[ 1.022258] libata version 3.00 loaded.
[ 1.036343] ahci 0000:00:11.0: version 3.0
[ 1.036385] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.036532] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.036539] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.037084] scsi0 : ahci
[ 1.037252] ata1: SATA max UDMA/133 abar m1024@0xf024e000 port 0xf024e100 irq 19
[ 1.510277] Refined TSC clocksource calibration: 1596.003 MHz.
[ 1.510296] Switching to clocksource tsc
[ 6.856991] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.857578] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 6.857585] ata1.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 6.858264] ata1.00: configured for UDMA/133
[ 6.858756] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 6.871132] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 6.871271] sd 0:0:0:0: [sda] Write Protect is off
[ 6.871276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.871320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.872158] sda: sda1
[ 6.873464] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.051357] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.707862] udevd[230]: starting version 171
[ 7.759090] ACPI: acpi_idle registered with cpuidle
[ 7.766584] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 7.766662] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 7.766699] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 7.766703] powernow-k8: 2 : pstate 2 (800 MHz)
[ 7.798328] rt5390 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.798437] rt5390 0000:02:00.0: setting latency timer to 64
[ 7.798971] <-- RTMPAllocAdapterBlock, Status=0
[ 7.860369] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.860383] ACPI: Power Button [PWRB]
[ 7.860558] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 7.861604] ACPI: Lid Switch [LID]
[ 7.861751] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.861761] ACPI: Power Button [PWRF]
[ 7.897248] vboxdrv: Found 2 processor cores.
[ 7.897357] VBoxDrv: dbg - g_abExecMemory=ffffffffa0276360
[ 7.897405] vboxdrv: fAsync=0 offMin=0x35d offMax=0xcf6
[ 7.897484] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 7.897488] vboxdrv: Successfully loaded version 4.0.8_OSE (interface 0x00180000).
[ 7.932205] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 7.934073] ACPI: AC Adapter [AC] (off-line)
[ 7.934370] wmi: Mapper loaded
[ 7.961127] acpi device:02: registered as cooling_device2
[ 7.961272] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 7.961285] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.003256] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 8.003495] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 8.014954] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20110316/nspredef-456)
[ 8.014969] ACPI: [Package] has zero elements (ffff88017c138cc0)
[ 8.014973] ACPI: Invalid active0 threshold
[ 8.025488] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.025495] ACPI: Thermal Zone [THRM] (52 C)
[ 8.044849] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 8.044866] ACPI: Battery Slot [BAT0] (battery present)
[ 8.076882] hp_accel: laptop model unknown, using default axes configuration
[ 8.109541] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.112918] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.112984] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.113075] r8169 0000:01:00.0: setting latency timer to 64
[ 8.113083] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[ 8.113141] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 8.113883] r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc90000c34000, 68:b5:99:e1:fa:b1, XID 0c200000 IRQ 40
[ 8.145250] usbcore: registered new interface driver usbfs
[ 8.145307] usbcore: registered new interface driver hub
[ 8.146258] usbcore: registered new device driver usb
[ 8.147469] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.211672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.211773] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.211870] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 8.211878] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 8.211930] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 8.226790] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 8.226839] QUIRK: Enable AMD PLL fix
[ 8.226874] ehci_hcd 0000:00:12.2: debug port 1
[ 8.226916] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf024c000
[ 8.236710] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 8.237083] hub 1-0:1.0: USB hub found
[ 8.237094] hub 1-0:1.0: 5 ports detected
[ 8.237272] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.237336] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 8.237342] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 8.237361] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 8.246722] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 8.246777] ehci_hcd 0000:00:13.2: debug port 1
[ 8.246803] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf024a000
[ 8.255280] [drm] Initialized drm 1.1.0 20060810
[ 8.256809] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 8.257138] hub 2-0:1.0: USB hub found
[ 8.257148] hub 2-0:1.0: 5 ports detected
[ 8.257353] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.257432] ehci_hcd 0000:00:16.2: setting latency timer to 64
[ 8.257438] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 8.257456] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 8.266735] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 8.266794] ehci_hcd 0000:00:16.2: debug port 1
[ 8.266822] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0248000
[ 8.280083] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 8.280419] hub 3-0:1.0: USB hub found
[ 8.280429] hub 3-0:1.0: 4 ports detected
[ 8.299920] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 8.368162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.368219] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.368296] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 8.368303] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 8.368334] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 8.383583] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf024d000
[ 8.438348] [drm] VGACON disable radeon kernel modesetting.
[ 8.439661] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.439670] pci 0000:00:01.0: setting latency timer to 64
[ 8.440157] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.440162] [drm] No driver support for vblank timestamp query.
[ 8.440168] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
[ 8.441308] hub 4-0:1.0: USB hub found
[ 8.441368] hub 4-0:1.0: 5 ports detected
[ 8.441720] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.441833] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 8.441841] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 8.441860] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 8.456856] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf024b000
[ 8.477927] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 8.477937] Disabling lock debugging due to kernel taint
[ 8.514652] hub 5-0:1.0: USB hub found
[ 8.514713] hub 5-0:1.0: 5 ports detected
[ 8.514902] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.515007] HDA Intel 0000:00:01.1: irq 41 for MSI/MSI-X
[ 8.515044] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 8.534738] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.534853] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 8.566706] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 8.583897] [fglrx] Maximum main memory to use for locked dma buffers: 5393 MBytes.
[ 8.583979] [fglrx] vendor: 1002 device: 9802 count: 1
[ 8.584734] [fglrx] ioport: bar 1, base 0x3000, size: 0x100
[ 8.584748] pci 0000:00:01.0: setting latency timer to 64
[ 8.585495] [fglrx] Kernel PAT support is enabled
[ 8.585539] [fglrx] module loaded - fglrx 8.86.5 [May 24 2011] with 1 minors
[ 8.598000] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 8.614292] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 8.614454] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 8.614783] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.614861] ohci_hcd 0000:00:16.0: setting latency timer to 64
[ 8.614869] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 8.614900] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
[ 8.623464] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0249000
[ 8.681124] hub 6-0:1.0: USB hub found
[ 8.681137] hub 6-0:1.0: 4 ports detected
[ 8.892947] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 8.940407] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 9.016651] lis3lv02d: 8 bits 3DC sensor found
[ 9.403986] Linux media interface: v0.10
[ 9.420636] Linux video capture interface: v2.00
[ 9.429080] uvcvideo: Found UVC 1.00 device HP Webcam-101 (174f:112b)
[ 9.455290] input: HP Webcam-101 as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input10
[ 9.455419] usbcore: registered new interface driver uvcvideo
[ 9.455423] USB Video Class driver (v1.0.0)
[ 9.460103] usb 2-2: new high speed USB device number 3 using ehci_hcd
[ 9.960350] usb 6-1: new full speed USB device number 2 using ohci_hcd
[ 10.246250] Bluetooth: Core ver 2.16
[ 10.246292] NET: Registered protocol family 31
[ 10.246295] Bluetooth: HCI device and connection manager initialized
[ 10.246300] Bluetooth: HCI socket layer initialized
[ 10.246303] Bluetooth: L2CAP socket layer initialized
[ 10.250254] Bluetooth: SCO socket layer initialized
[ 10.265755] Initializing USB Mass Storage driver...
[ 10.265954] usbcore: registered new interface driver usb-storage
[ 10.265957] USB Mass Storage support registered.
[ 10.270760] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.271722] usbcore: registered new interface driver btusb
[ 10.288479] scsi1 : usb-storage 2-2:1.0
[ 10.288755] usbcore: registered new interface driver ums-realtek
[ 10.293708] usbcore: registered new interface driver uas
[ 10.430407] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
[ 10.430745] Registered led device: hp::hddprotect
[ 10.430769] hp_accel: driver loaded
[ 10.526540] EXT4-fs (sda1): re-mounted. Opts: discard
[ 11.289737] scsi 1:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 11.290445] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 11.312911] fuse init (API version 7.16)
[ 11.519361] r8169 0000:01:00.0: eth0: link down
[ 11.527370] KH: Use High Memory for Beacon
[ 11.531213] <-- RTMPAllocTxRxRingMemory, Status=0
[ 11.588181] <==== rt28xx_init, Status=0
[ 11.588301] 0x1300 = 00064300
[ 12.021213] sd 1:0:0:0: [sdb] 3987456 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 12.023162] sd 1:0:0:0: [sdb] Write Protect is off
[ 12.023168] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 12.023172] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 12.025360] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 12.027256] sdb: sdb1
[ 12.031613] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 12.031628] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 12.486029] fglrx_pci 0000:00:01.0: irq 42 for MSI/MSI-X
[ 12.486918] [fglrx] Firegl kernel thread PID: 779
[ 12.486999] [fglrx] Firegl kernel thread PID: 780
[ 12.487080] [fglrx] Firegl kernel thread PID: 781
[ 12.487290] [fglrx] IRQ 42 Enabled
[ 12.612000] [fglrx] Gart USWC size:1280 M.
[ 12.612007] [fglrx] Gart cacheable size:508 M.
[ 12.612017] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 12.612021] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 12.612025] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 25.342715] EXT4-fs (sda1): re-mounted. Opts: discard,commit=600
[ 39.000090] NET: Registered protocol family 10
[ 39.001989] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.648846] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. -
Cannot open nib - The application Interface Builder quit unexpectedly
Just installed the iPhone SDK and installed sample code. The Interface Builder will not start. At startup, the following message is displayed: "The application Interface Builder quit unexpectedly."
I've tried the standard Xcode SDK and it has the same problem. I've repaired permissions on the disk, to no avail. I'm stumped on this. Thanks for any suggestions.
Here's the first section of the crash report, showing the builds for Interface builder and Mac OS X (10.5.6).
Process: Interface Builder 8090
Path: /Developer/Applications/Interface Builder.app/Contents/MacOS/Interface Builder
Identifier: com.apple.InterfaceBuilder3
Version: 3.1.2 (677)
Build Info: InterfaceBuilder-6770000~1
Code Type: X86 (Native)
Parent Process: launchd 137
Date/Time: 2009-01-03 19:29:24.618 -0700
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000011
Crashed Thread: 0
Thread 0 Crashed:
0 com.apple.CoreFoundation 0x910272b4 CFRetain + 36
1 com.apple.HIToolbox 0x911ff566 TThemeFont::SetCTFont(__CTFont const*) + 62
2 com.apple.HIToolbox 0x911ff4f4 TThemeSpecifiedFont::Init(THIThemeTextInfo const*) + 32
3 com.apple.HIToolbox 0x9110ccb3 ThemeFontCreate(THIThemeTextInfo const*) + 239
4 com.apple.HIToolbox 0x9110cb85 TThemeText::ConstructThemeFontWithFontID(__CFString const*, THIThemeTextInfo const*) + 79
5 com.apple.HIToolbox 0x9110ca49 TCoreTextEngine::Init(void const*, THIThemeTextInfo const*) + 159
6 com.apple.HIToolbox 0x9110c781 TThemeTextCache::Create(void const*, THIThemeTextInfo const*) + 177
7 com.apple.HIToolbox 0x9110c659 ThemeTextCreate(void const*, THIThemeTextInfo const*) + 33
8 com.apple.HIToolbox 0x9110c3b5 DataEngine::GetTextDimensions(void const*, float, HIThemeTextInfo*, float*, float*, float*) + 289
9 com.apple.HIToolbox 0x9110c250 HIThemeGetTextDimensions + 202
10 com.apple.HIToolbox 0x912abbad HIClockView::CalculateTextDimensions() + 133
11 com.apple.HIToolbox 0x912abd82 HIClockView::GetOptimalSizeSelf(CGSize*, float*) + 118
12 com.apple.HIToolbox 0x9114852d HIView::SendGetOptimalBounds(CGRect*, float*) + 151
13 com.apple.HIToolbox 0x9114846d HIView::GetOptimalSize(CGSize*, float*) + 53
14 com.apple.HIToolbox 0x9119bd85 GetBestControlRect + 105
15 ...terfaceBuilder.CarbonPlugin 0x162f127a IBWindowForHostingCarbonControls + 9638
16 ...terfaceBuilder.CarbonPlugin 0x162f1b1f IBWindowForHostingCarbonControls + 11851
17 ...terfaceBuilder.CarbonPlugin 0x162f2766 IBWindowForHostingCarbonControls + 14994
18 ...terfaceBuilder.CarbonPlugin 0x162f37c8 IBWindowForHostingCarbonControls + 19188
19 ...terfaceBuilder.CarbonPlugin 0x162eb17a 0x162e5000 + 24954
20 com.apple.InterfaceBuilderKit 0x002c65e0 -IBLibraryObjectTemplate classesOfPasteboardObjects + 194
21 com.apple.InterfaceBuilderKit 0x002c64b9 -IBLibraryController typeSummaryForObjectTemplate: + 106
22 com.apple.InterfaceBuilderKit 0x002c5fc4 -IBLibraryController createAssetForTemplate:inNamespace: + 554
23 com.apple.InterfaceBuilderKit 0x002c4fe3 -IBLibraryController createAssetsFromTemplatesInNibNamed:forPlugin: + 746
24 com.apple.InterfaceBuilderKit 0x002c499e -IBLibraryController loadLibraryObjectsForPlugin: + 287
25 com.apple.InterfaceBuilderKit 0x002c414e -IBPlugin didLoad + 480
26 ...terfaceBuilder.CarbonPlugin 0x162ea66f 0x162e5000 + 22127
27 com.apple.InterfaceBuilderKit 0x002c389f -IBPluginController loadPluginAtPath:error: + 2809
28 com.apple.InterfaceBuilder3 0x00002345 0x1000 + 4933
29 com.apple.AppKit 0x91f983a3 -NSApplication run + 83
30 com.apple.AppKit 0x91f658a4 NSApplicationMain + 574
31 com.apple.InterfaceBuilder3 0x00004eca 0x1000 + 16074Thanks for asking. It happens when I click the "Interface builder.app" name in finder and when I double-click an .xib file name in finder.
As I mentioned, I have repaired permissions on the drive to no avail. I have also read older posts on the web referring to various preference plist files but those don't exist with this build of xcode.
I have also had older builds of xcode on this mbp and worked thru a couple of tutorials. Interface Builder from those older builds worked. I'm not sure were to get them, now, and I doubt they would have the iphone sdk included. -
How to access my hard drive over the internet?
Hi,
I would like to be able to access my hard drive while I am away from my desk. I am not running OS X Server. How can I do this?
Also, I am behind an Airport Base Station. Which ports would I need to open up?
Besides my Firewall and my Administrator password, how else can I secure the access?
thank you....VPN does not allow you to control your computer remotely, you are probably thinking of VNC. A VPN essentially extends your local network so that you can access it remotely. You can control your host computer to more than you can control any other computer by accessing it over your LAN.
I still think a VPN is the best option, but it's not easy to install (MacOS X server has a VPN with a GUI built in). OpenVPN is a great option, and there are several GUI interfaces for it (look for these on www.versiontracker.com). This is best because it is secure and will allow you to access your entire hard drive.
Like I said in the last post, WebDAV is also an option. This is what a .Mac iDisk is. This will only allow you access a specific folder (or set of folders) that reside in the Apache (var/www) directory. Although you can always make an alias to the apache directory and keep it in your Documents folder.
A third option that I didn't state before because it's probably the least best is to use NFS to access your home computer. This will allow you to access your entire hard drive. The downside to this is that there is no encryption, nor a password. For security, it uses IP or domain addresses. So this is not an option unless you will to accessing your hard drive from a computer (or a few computers) with (a) static IP address(es). -
Can you share a hard drive with the current airport extreme
Hey all!
I read that you can share USB drives with the new airport extreme. Can you do that with the current ones?
Thanks,
BMassi65, Welcome to the discussion area!
You really should start a new thread since your question is about the new square AEBS and the thread started with a question about the previous AEBS.
With either AEBS you could wirelessly gain access to a hard drive by one of these 3 methods:
Use a hard drive with wireless networking capabilities. The drive would connect to the wireless network like any other wireless client.
Use a hard drive with an Ethernet interface. Connect the drive to the AEBS's LAN port.
Connect a hard drive via FireWire or USB to another Mac and then share the drive from that Mac.
The new square AEBS offers a new possibility. You can connect a USB drive directly to the new AEBS and share it to devices connected to the AEBS's network.
What performance could I expect?
No one can answer this directly since no one has any of these devices to try. -
Having issues after installing Essbase V9.3.1,configuring the SQL interface
I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
.odbc.ini
[ODBC Data Sources]
DOLU003=IBM DB2 ODBC DRIVER
[DOLU003]
Driver=/home/db2inst1/sqllib/lib/libdb2.a
Database=DOLU003
[ODBC]
Trace=0
TraceFile=odbctrace.out
InstallDir=/home/db2inst1/sqllib/odbclib
[Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
Received Command [SQLRetrieve] from user [Olapadm]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
Connection String is generated
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
Connection String is [DSN=DOLU003;UID=...;PWD=...]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
= 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
--------------------------------------------------------------------------------------------------------------------------------------------I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
Once I opened the 32 bit driver interface directly and set it up the errors went away. -
Why does the sensing interface flap or frequently go to the down state in IDS ?
Hi all,
this is the answer I found in Cisco website, but according to this, I didnot make any updates or any configuration changes, but stilll my sensing interface is going down. I'm not even getting the error messages which they have mentioned at the end.
Ans: During a signature update and reconfigurations, sensorApp stops to process packets as it processes the new signatures in the update. The network driver detects that sensorApp has stopped and pulls any new packets from the buffer. So the network driver does different things, which depends on the configuration and sensor model:
Promiscuous Interface—It brings the link down on the interfaces, and brings the link back up once sensorApp starts to monitor again.
Inline Interface or Inline Vlan Pair—It depends on the Bypass setting:
Bypass Auto—The driver keeps the link up and begins to pass packets through without analysis. It then reverts back to sending the packets through sensorApp once sensorApp starts to monitor again.
Bypass Off—The driver brings the link down on the interfaces, which is the same as in promiscuous mode, and brings them back up once sensorApp starts to monitor again.
So, if sensor app does not pull packets from the buffer, which possibly occurs because there is no interface configured to process packets, then the driver can put the interface in a down state.
These logs are seen when the sensing interface flaps:
28Jun2011 09:03:09.483 6050.885 interface[409] Cid/W errWarning Inline databypass has started. 28Jun2011 09:03:13.639 4.156 interface[409] Cid/W errWarning Inline databypass has stopped. 28Jun2011 09:19:23.922 970.283 interface[409] Cid/W errWarning Inline databypass has started. 28Jun2011 09:19:27.486 3.564 interface[409] Cid/W errWarning Inline databypass has stopped.It is possible you are overloading that little 4215. If that is the case you should also be seeing "missed packet percentage" messages in your events.
How much traffic is your 4215 getting? Those sensors will start to drop packets for inspection at about 30 Mb/s.
- Bob -
How to change the Ethernet Interface name in Solaris 10
I have to install Oracle 10G RAC on three nodes with different ethernet cards, but the ethernet interface name must be the same which is the precondition for Oracle RAC installation.
So I want to know how can I change the ethernet name in Solaris.
For example, the ethernet name in the OS is "ce0", how can i change the interface name "ce0" to "e1000g0".
bash-3.00# dladm show-dev
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 100 Mbps duplex: half
ce2 link: unknown speed: 100 Mbps duplex: half
ce3 link: unknown speed: 100 Mbps duplex: half
ce4 link: unknown speed: 100 Mbps duplex: half
ce5 link: unknown speed: 0 Mbps duplex: unknown
Thanks in advance.s-wilson wrote:
You can't. The ce or e1000g refers to the driver as well as the adapter itself. The only exception I am aware of is: the ipge and e1000g which both refer to the Intel Pro 1000.I'm pretty sure I've renamed a driver in the past (and all references to it in name_to_major, path_to_inst, driver_aliases, and minor_perm) and had it function just fine after 'plumb'ing it up. However I just tested this by trying to turn a 'pcn' driver into a 'foobar' driver on a vmware box. It looks like everything works except some internal bits of the driver continue to create one file with 'pcn' in the name instead of 'foobar'. And since this is Solaris 10, the /devices filesystem is dynamic and read-only. I can't seem to force the change.
So while this may be possible with some drivers (and maybe only on older versions of the OS), it doesn't seem to be generally possible for all drivers on Solaris 10.
Darren -
Getting the network interface up in solaris 10
Hi,
I am a solaris newbie and am trying to get the network interface up on solaris 10. I have set the required details in
/etc/hostname.if
/etc/hosts
/etc/inet/ipnodes
/etc/inet/netmasks
/etc/defaultrouter
yet on the startup i get a message "failed to bring up IPv4 interfaces : interfacename"
And when the server starts up after giving the command "ifconfig if up"
the network interface comes up.
I need to get the interface up on the startup itself.
can anyone help me on this ?????
Thanks in advance,... and of course, you need compatible hardware.
But you failed to tell anyone what Ethernet adapter you're trying to use.
Is it on the HCL ? http://www.sun.com/bigadmin/hcl/
If it requires third party driver software, did you install that as well ?
You failed to tell anyone whether you're installing to Solaris x86 or to Solaris SPARC.
( For example, a PeeCee NIC will generally just not work in a SPARC system. ) -
How to modify capabilities for the ethernet interfaces in a Solaris 10 x86
Hello.
Does anybody know how to configure the ethernet capabilities in a interface in a X86 server? I have read that NDD command is not supported for this kind of servers and I cannot find how to do that.
My root problem is that the IPMP is not working and my first clue is the configuration for cap_pause parameter in the involved interfaces, that they are active for both IPMP interfaces.
How can I modify cap_pause for the interfaces in this server: X4170 with Solaris 10.
Thanks in advance
Regards,
Luis.Not familiar with the X4170 but you might want to look for a config file in /kernel/drv that matches your interface. There are some configuration parameters you can set there if the device driver supports the .conf file.
-
Am I using my drives in the best way in terms of performance?
I want to make sure I'm using my iMac and drives in the way that will give me the best FCPX performance.
I have a mid-2010 iMac 2.93 GHz i7 core with 32 GB of RAM running OS 10.7.5. It has an ATI Radeon HD 5750 1024 MB graphics card. My iMac has two internal drives: a 256 GB flash drive (my "Macintosh HD"), and a 2 TB standard drive (my "Macintosh HD2"). I also have an external 2 TB drive from OWC/Macsales connected with Firewire 800. I can't find the specifics on this OWC external drive, but I know I bought it as a video editing drive (it is not just for backing-up). Though they introduced soon after my iMac, mine does not have a Thunderbolt port.
As things stand now, my OS and FCPX are on the main internal hard drive (it's my understanding that that is where they are automatically), which is the 256 GB flash drive labeled "Macintosh HD." And I have my FCP event libraries and my projects on the second internal drive, which is the 2 TB internal drive labeled "Macintosh HD2." Right now I'm only using the OWC 2 TB external firewire 800 drive for storing the video I upload from my cameras.
Does this sound like the best way to go in terms of performance? I mean, is it better to use the internal 2TB drive for my events and projects? Or would they be better on the OWC 2 TB external firewire 800 drive? Or should the projects be on one and the events on the other?T'bolt SSD or T'bolt RAID will be faster than your internal spinning disk drive. For sure.
Larger drives are faster than smaller drives, mechanically. But the data throughput is the same. The differences are so small no one can notice in real world work. But you get so many advantages with larger drives.
See, a hard drive encoluser has more than one platter in it. A single 4 TB drive can have 4 platters in it. so it access data, "mechanicaly" faster than a smaller drive with only 1 or 2 platters. BUT when that data hits the controller card, the interface protocol (FW, USB, SATA, etc), it all shuts down to the same speed. The platters and read/write heads are physicall MUCH faster than what the interface and controller card can handle. So all that matters is how it gets connected. USB 2 suck, FW is minimal for video, eSATA and SATA are pretty darned good, 6GB SSD is awesome, as is T'bolt.
Let me put it this way. spinning disks are slower than SSDs in terms of internal "data access" (read/write) speed. Both have to deal with the same "bandwidth" issues when they hit an interface such as USB or FW or T'bolt. Two mechanically different things, but the work together to give you the total sum of a drives ultimate real world performance.
Now, a single SATA drive internally will be very slightly slower than a SATA drive in a T'bolt encoluser. Because T'bolt has greater bandwidth than SATA. But, the differences are so small, in daily real world operations no one would notice, and the price of the T'bot SATA enclosure would just be expensive.
That is why you see T'bolt enclosures with SATA drives always as RAIDs, 2 or more drives. That's were SATA drives and T'bolt really shine. T'bot really shines with SSD RAIDs, but their super expensive and super limited capacity.
But directly to your question, hard drives are the opposite of automobiles; bigger is always faster. -
The interface type is valid, but the specified interface number is not configured
Hi
I'm all new to using LabVIEW, which I have to use for a project. I'm trying to make a setup with a Keithley 2000 multimeter and an Agilent U2722A SMU. But I can't figure out how to get these instruments to communicate with LabVIEW. I can see and send commands to the Keithley 2000, but not the Agilent U2722A, with Agilent Connection Expert. But when I use LabVIEW I can't see any of them, and if I use the drivers I've found with "NI Instrument Driver Finder - Configure Search" I pops up with an error message saying
"Error -1073807195 occurred at VISA Open in Keithley 2000.lvlib:Initialize.vi->Keithley 2000 Read Multiple.vi?
Possible reason(s):
VISA: (Hex 0xBFFF00A5) The interface type is valid, but the specified interface number is not configured.?"
I've read all the threads I could find about this problem, but none of them helped. I've checked that the NiVi488.dll is checked in MAX under the VISA options. When I open the VISA Interactive Control I see an ASRL1>>ASRL1::INSTR and ASRL10>>ASRL10::INSTR. I don't know why it says ASRL, when I'm using an USB/GPIB interface, but the Keithley 2000 have 10 as the address. (the Agilent U2722A is connected directly by USB)
Assume I know nothing.
ThanksI'm using the GPIB-USB-HS. I also used this on the development PC when I exported the hardware configuration.
This shows up in my MAX config and when I scan instruments, all of them show up. I can query them in MAX no problem.
My installer includes all the .exe's from my project. As I said, I've done this with my previous 2009 installer without any issue. I upgraded my installer since I upgraded my project for version 2013. The error only happens when I run my code.
-
I am trying to control a Tektronix 370B curve tracer using LabView via a GPIB interface. However, there are no drivers available for download for the 370B. There is one available for the 370A, but it is not compatible with the 370B and I have been unable to figure out how to modify it to make it work with the 370B. Does anyone know how to modify this driver, or know of an existing driver that works with the 370B? Thanks!
Hi S _Bracht,
Yeah, unfortunately, the Tektronix 370B does not currently have an instrument driver and the driver for the 370A is not supported by National Instruments (it is just posted on our website as a courtesy) - so I am afraid that there is not really any more information on the differences that might exist between the two available from National Instruments. As an alternative, you can always develop your own driver using the VISA and 488.2 drivers + a copy of the user manual for the Tektronix 370B. Otherwise, you may consider speaking with Tektronix or getting ahold of a User Manual for the 370A and comparing some of the settings - there are likely some differences in your configuration options at the very least. Or, if someone out there has tackled this before and shares their knowledge...
Good luck!
Regards,
Anna M.
National Instruments
Maybe you are looking for
-
Hi guys,I have (in details) File1: public class Node { int key; public Node(int k) { key = k; File 2: ArrayList list = new ArrayList(30); Then i do list.add(l) l is an Object Node and the compiler says warning: [unchecked] unchecked call to add(E) as
-
"disk cannot be read from or written to" -- help, please.
this started in perhaps the last week or so - i tried updating my mini and it took ages. so i decided i would restore it instead, and as it was doing so, a message popped up and told me that the restore process could not take place because the "disk
-
Backing up imported photos to an external hard drive
I've searched for an answer to my question, but came up blank. So, here goes. First I guess I should say that I'm using mac OS 10.5 Leopard and have Lightroom 1.4.1 When I import photos, at the same time I also back them up to an external hard drive.
-
Setting Document Headers in Appleworks 6
How do I fix a letter so the first page has my letterhead and all following pages have a header with a page number? I found how to insert a header and put a page number and date in it, but can't figure how to make that NOT appear on the first page. T
-
Hi, As we are doing manual recover through BPEL console by selecting the waiting instances. can any one please tell me whats the funda behind that.. 1. how many threads are there for handling these waiting instances 2. average response time after cli