ATA186 with fax and "poor line condition"

I have been getting reports from users of some fax machines (mostly on ATAs, but also on VG248s) that they are getting a report of "poor line condition" on their fax machine which causes the fax to a) not complete the send b) not go through at all.
has anyone seen this and know of any possible causes and/or solutions?
i have tested faxes to and from the machines (usually only one page) but they have come through.
any suggestions would be appreciated.
scott

Hi Scott,
Ask your telco if they have an automated fax testing facility. In Oz we had an online diagnostics test. You fax the number and it faxes you back a report of how well your fax is setup.
Most fax problems I've had are volume level related, either on the trunk to the PSTN, the ATA port or the fax itself.
Other possible causes could be if you were routing the fax across an IP network and compressing it.
Cheers,
Tim.

Similar Messages

How to add a JPanel with label and border line

hi,
I want a Jpanel with label and border line like this.Inside it i need to have components.Is there a resuable component to bring this directly??
Any solution in this regards.???
Label-----------------------------------------------------------
| |
| |
| |
| |
| |
|________________________________________ |

[url http://java.sun.com/docs/books/tutorial/uiswing/misc/border.html]How to Use Borders

Pdf files print with horizontal and vertical lines

All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines. I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result. It is not just that one pdf file either, I have tried multiple files. HELP. Does anyone have any ideas?

It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

CRXIR2 - A chart with horizontal and vertical lines?

Good morning,
Is it possible to create a chart with horizontal and vertical lines?
I have a chart where the Y-Axis show the percentage and the X-Axis shows a timeline.
The horizontal line shows the percentage for the points in time.
Now I would like to mark some special points in time on the X-Axis with a straight vertical line.
Is there a way to do that?
Thank you very much in advance
Christoph

Hello Usama,
unfortunatelly I couldn't find that that feature in the basic chart features.
Also the webpage www.3DGraphics.com doesn't exist and I had no luck to google for 3DGraphics.
It's a little strange, that it seems to be possible to draw one additional horizontal line with the basic features, but no additional vertical line.
for example.
If the main chart would be y=3x+1
It seems to be possible to draw e.g. y=5
But I see no chance to draw x=5
In addition, to make it a little more complicated, I would need to have that dynamically, based on the values of a sql-statement.
thx
Christoph

Using Logic 9 with mixer and audio line in on Mac Book Pro.

Hello, I Just began studio recording, and am making the switch from garage band to logic 9.
I do not know how to make my instruments play through logic 9 using a mixer and a Line In connection to the mac like I could with garage band.
Please scroll down to the bold underline text for tl;dr
I am self taught, and never thought I would love working with sound, and I spent over a year touring the US doing live sound for concerts and am now helping out with live studio recordings, and projects on my own.
It started as something to do to fight boredom and to help, basically making sure nobody touched the mixer or to unplug it if things caught on fire.
By the end of the year I had been helping "Others" with live sound, and I learned a lot about the features and trims on the analog mixer that are more complex than "mixing the volume of each track" lol.
So please be patient with me. I do not know many of the terms, I just "feel" when something is not right and know where to go to in order to fix it or make it better, I dont have much practice when it comes to the technical side with computers and sound.
so I will try my best to understand your help.
Anyway's, I looked up online, and I cannot figure out how to get logic 9 to playback instruments set up on my mixer.
I currently have Male L/R 1/4inch to 8th Inch cables coming from main into the Line In port on the mac.
I know this setup is called "stereo" (I think?) and Im limited with only two separate tracks to record, so I have my selected tracks panned right and left for two separate inputs on the program.
I know everything works because I had it all setup on garage band, I changed nothing for logic, but all I can find are MIDI tutorials and I am using analog to line in, not MIDI.
Please let me know what I have to do to bring up two separate tracks, and also be able to hear them wile I play before recording.

Kudos to figuring it out yourself.
Yes, Logic is geared to the professional user, you will need to set up the program to your particular way of working, Logic was well developed for professional use long before Apple purchased it, it's not an Apple program per se. It's complex and offers a myriad number of choices so that it can be configured to many styles of working, there's often 3 or 4 ways to perform the same function.
Logic insists the user educate themselves... which is a good thing.
Here ya go!
http://documentation.apple.com/en/logicpro/
"Exploring Logic Pro" is a good one to start with.
Also in the main manual... "Setting Up Your System"

Screen turns green with pink and white lines thru it,frozen,wont turn on or off

I was using an app on the 4th Generation Ipod Touch and all of a sudden the screen froze for about a minute and then turned a light green color with many small white lines through it. Also we cannot get the Ipod to turn off or on... Help?

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

How to email purchase order along with body and subject line

hi experts,
i have to email the purchase order along with the body and subject line. I am able to send the purchase order as a pdf attachment, but i have still not got a solution how to add body and subject line to this mail.
plz help me out.

Hi Santosh,
if you investigate a little bit the PO output, you can find following information in SRM output customizing:
POs are edited by methode PROCESS_BBP_PO_MAI from class CL_PD_PO_PROCESSING_BBP.
Subject, body and attachments are handled here.
So create your own class and method, and assign them in this customizing point (SRM Server --> Cross-Application Basic Settings --> Set Output Actions and Output Format --> Define Actions for Purchase Order Output).
Rgds
Christophe
PS: please reward points for helpfull answers

Problem with Fax and ATA

Hi,
i do not have problem to send Fax to the PSTN, but when I try to receive a fax on the fax machine in port1 of the ATA, the machine never give fax signal.

Hi Leonardo,
Have a look at the following;
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SCCP) (2.15.ms, Rev B0)
Configuring and Debugging Fax Services
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00800c4d1e.html#1016012
Configuring and Troubleshooting the Cisco ATA 186 with Fax
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml
Configure Fax Detection Method on the Cisco ATA 186
Use a web browser and go to http:///dev (for example, http://172.16.104.117/dev) in order to configure the Cisco ATA 186 using the web interface.
You must configure these parameters in order to configure the Cisco ATA 186.
Audio Mode
bit 2 (18)=0 Enable detection of FAX CED (answer) tone and switch to FAX mode for the rest of the call if the tone is detected.
Hope this helps!
Rob

Reply opens with indent and vertical lines. How to avoid them for good.

In TB when I click reply, a message that I am replying to opens with vertical blue lines on the left and right (indent vertical lines) and with a heading like this:
On 05/12/14 11:21 AM, [email protected] wrote:
Is there an easy setup to avoid getting the lines forever and always get senders' headers in my replies like this:
From:
To:
Sent:
Subject:
I honestly spent almost 3 hrs but found some rather complicated and uncertain solutions. In my mind it should be as simple as putting or removing a check mark in some set up tabs.
if you can help, pls give detailed step-by-step info so even I can manage to do it.
thx a lot

Matt. thank you
you are right, those vertical lines have disappeared but I got
>
>
>
instead.
Is there an easy setup to avoid getting the lines and/or > > on each line of recipient email forever and always get full senders' headers in my replies like this:
From:
To:
Sent:
Subject:
I was a happy user of outlook express, but now I got a new PC with windows 8 which does not support OE.
I am a Thunderbird newbie and it is extremely strange and frustrating.
Why not to offer all possible choices, options, and settings to make it adaptable and easy for each user with particular needs or preferences?
I would gladly pay $50 or $100 instead of wasting 20 or 30 hours trying to find a way to bypass weird (to me) restrictions or missing settings.
If OE resolved the problems, it should be possible to resolve for Thunderbird creators too.
I am grateful anyway for the free app but I may need to waste even more days experimenting with other email clients.
Trying to solve the problems I found that other Thunderbird users have been looking for the same solutions on the internet for over 8 years or so!!!
Another huge problem of the TB is difficulty of getting a full HTML source, editing it and easily switching to text mode back and forth.
And finally why not make every piece of text in any spot of the entire TB copy-able (let us copy any words or text anywhere in the TB and then paste it to a message). For example I can set up and see all headers ( view ... headers..... all ) but I can not copy/paste them into the message from which they were removed (why?).
If Thunderbird creators ever read this, here is an offer or kind request. Pls create a better Thunderbird version with features and options given above, consult other users, search the Internet to accommodate a few wishes of many others. And offer a paid version of the Thunderbird. I think hundreds of thousands of unhappy users would buy a better mousetrap, or in this case, a better Thunderbird. The news will spread like a thunder all over ....
It is a win-win-win opportunity to make everybody happy, cut wasted time, improve experience and satisfaction, and make $$$$$$$ at the same time!

Table data needs to be displayed with horizontal and vertical lines

Hi,
I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
Can you let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
Regards
Senthil

well it is possible but quite tricky.
All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
- calculate those variables during runtime
- add box-statements with those variables.
to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
regards

Dyanamic table is SAP Script with horizontal and vertical lines

Hi,
I need to display the data of the table in the SAP script which is having both horiziontal and vertival lines.
the out put needs to looks as it in Excel...where there are multiple records with 5 fixed coulmns each seprated from one another by horizonalt and vertical lines..
I thinking about useing the Box with XPOS and YPOS who value changes dynamicaaly..
But again as the number of pages might be more than one..i think there will issues,
Can you let me know how to proceed in SCRIPT ,,,, where the number of records might vary ..and also ..it might continue to second page..
Regards
Senthil

well it is possible but quite tricky.
All you got in SAP-SCRIPT to achieve this is the BOX-Statement.
The BOX statement works with variables for XPOS, YPOS, WIDTH and HEIGHT. what you need to do is:
- calculate those variables during runtime
- add box-statements with those variables.
to calculate those variables you need to count used lines and so on. i hope i showed you a way, rest is a lil brainwork then.
regards

How can I prevent my screen getting covered with black and white lines while working on the internet which only happens with firefox and only go when I 'go back' or go down a page?

It happens as I surf - horizontal black and white lines particularly when I scroll down and only goes if I can go to a new page or go back a page. It is driving me crazy and only happens with firefox. I have disabled all plug ins but it still happens.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Ipod touch 4 has a black screen with white and green lines across it and wont turn off

My sons ipod touch has a black screen with sometimes white lines and then flashes to colored lines. Also when i try to turn it off it turns right back on and has the apple symbol but then goes back to black screen with lines. what to do?

- Try:
iOS: Not responding or does not turn on
- If not successful let the battery fully drain. After charging for at least an hour try again.
- If still problem time for an appointment at the Genius Bar of an Apple store.

Problem with CDATA and new line character

I parse a xml document with org.w3c.dom, the document contain a CDATA section in which there are more lines of text, each line is terminated with the new line character (\n).
Example:
<nota>
<[CDATA[
first line
second line
third line
]]>
</nota>
When a parse this node:
Text txt_nota=(Text)elm_nota.getFirstChild();
String nota=txt_nota.getData();
the value returned is one string with no new line characters, example:
"first linesecond linethird line"
what's wrong?

Because i use the string nota into a jsp page and i print the string nota into a textarea and the text is with no newline, example:
<textarea name="nota" rows="4" cols="60"><%= nota %></textarea>
the text into textarea is:
first linesecond linethird line
but i want that the text displayed into textarea is equal the text into the CDATA section:
first line
second line
third line

HT201412 My ipod screen is black with white and gray lines all over; i need help please!My ipod also won't respond to any button pressing and nothing shows/syncs on itunes

I was using my ipod when the screen froze,then it went black/gray with messedup pixels and lines everywhere.I already tried plugging it in and connecting it to my computer,but nothings shows up in itunes, and my ipod doesn't respond to any buttons.Plus it won't go off.Someone please help; i don't want to have to replace it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

ATA186 with fax and "poor line condition"

Similar Messages

Maybe you are looking for