Atapi Dvd A DH16AASH Driver registry corrupted

I have a Gateway DX Series DX4320-19 Phenom II X6 with Windows 7 Home Premium. The optical drive stopped working and the Device Manager gives the msg Windows cannot start this hardware device
because its configuration information (in the registry) is incomplete or damaged. (Code 19)
How do I correct this?

Click Start
click All Programs.
Click Accessories, and then click Run.
Type regedit, and then click OK.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
In the navigation pane, locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step
8.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
In the right pane, click LowerFilters.
Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
When you are prompted to confirm the deletion, click Yes.
Exit Registry Editor.
Restart the computer

Similar Messages

  • Satellite A205-S6808 corrupted DVD/CD-ROM Driver - Code 39

    My driver is corrupted for my CD-ROM/DVD player.
    There is absolutely no support for my model on the Toshiba homepage.
    I tried to download the drivers for the L series L505 since my tech friend said it should have worked. It did not.
    The device shos up, but I get a driver missing/corrupted message from windows.
    I am running win 7 32 bit and the DVD player is the same one that came installed when I bought the laptop.
    This is the message I get "Windows cannot load the device driver for this hardware.
    The driver may be corrupted or missing. (Code 39)"
    CAN ANYONE HELP??

    Hi
    Im a little bit confused how you have managed to download the CD/DVD driver for the internal ODD (optical disk drive).
    The point is that all Windows operating systems contain own Microsoft ODD driver which controls the CD/DVD drive.
    Therefore its not necessary to load/install any drivers for CD/DVD drive.
    In my personal opinion its a registry issue.
    You should firstly go to the device manager and should remove the CD/DVD drive from the system.
    Next step is registry cleaning.
    Start regedit and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    After that reboot the unit
    Should work
    Greets & Good luck
    PS; This is an US notebook model and all drivers can be found on Toshiba US page.

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • I have a DVD-RAM Drive(ATAPI DVD A DH16AYH) It Can't read dual layer DVD's.

    Hello Sir,
    I have a DVD-RAM Drive(ATAPI DVD A DH16AYH) which can't read dual layer DVD's also has problem in writing DVD's.
    When i burn a single layer DVD at last i.e, at 100% or just before finishing i get error DVD writes Fail "Disc write fails to write Disc-at-Once".
    What Should I do? 

    i have the exact same disc drive,it has Never worked.nobody at hp would talk to me about a warrenty replacement unit.ever

  • CD ROM driver is corrupted. Tried to uninstall and download to install again. Error message says

    CD ROM driver may be corrupted.  Tried to uninstall on Device Manager and boot up again to re-install.  CD ROM comes back up but has a yellow triangle with a 1 in it.  CD ROM drive still does not work.

    Hi,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager.  Click to open the IDE ATA/ATAPI Controllers.  Right click on the first channel and select uninstall.  Do not delete drivers if asked.  When uninstalled repeat the process for each channel.  Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.
    Reboot the PC and let Windows reinstall the devices.  Check the drive again.
    If it still isn't working, run the automated fixit from Microsoft on the link below again.
    Windows 7
    Vista
    Next, from the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • DVD/CD optical drive is recognized only occasionally and temporarily

    Hi, I recently bought an ASUS Essentio desktop model CG8350 running Windows 7 Home Premium 64-bit. My DVD/CD optical drive is not consistently being recognized. I've made few changes to the computer and have even tried reinstalling Windows (system recovery, factory settings), but no luck. The curious thing is that after booting up I can occasionally temporarily see the D:\ optical drive listed under My Computer or under Device Manager, but after a few seconds or about a minute after restarting or trying to read a disk, this disappears and the optical drive is no longer shown. I would take it back to Best Buy I bought it for repair, but unfortunately that was in the U.S. and I've since moved to Canada. It's frustrating that Best Buy Canada won't honor service warranties for items bought from Best Buy U.S. If there's something I can try in order to avoid shipping it off to ASUS or back to Best Buy U.S. (at my expense, and potential loss of PC for a few weeks), I would much prefer that. These are the things I have tried so far: 1) opening it up and checking/re-plugging the power cable to the optical drive and the data cable between the optical drive and motherboard. All cables seemed fine. The drive ejects and spins a little bit when a disk is inserted, but neither a blank CD/DVD nor a commercial CD are recognised after insertion. 2) looking at the registry to try the "delete UpperFilters" and "delete LowerFilters" trick that I've seen posted several times. Since the computer had Windows 7 from the start (was not upgraded), these entries were not visible under the suggested registry subkey. 3) under boot options, I've selected "Disable Driver Signature Enforcement" and have booted up. The optical drive showed up under My Computer and/or Device Manager for a few seconds or a minute, but then vanished. 4) disabled integrity checks: I've pasted "bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS" into the Run window. After restarting, the optical drive is again occasionally visible, but only for a short period after which it disappears. 5) following a tip on one website, I tried shutting off and unplugging the data cable between optical drive & motherboard, restarting the computer so Windows could "see" there was actually no optical drive connected, then shutting off and connecting the data cable again and restarting. no luck. 6) I've run the Microsoft Support Fixit executable under "Your CD or DVD drive can't read or write media". The first time I ran this, it ran for about 5-10 minutes, but didn't diagnose a problem. The second time I tried to run it (after the Windows 7 re-install), is said my CD/DVD drive was not detected, so didn't run. 7) I've tried built-in Windows diagnostics and ASUS diagnostics, but they didn't help much. 8) I've updated ny BIOS to the most recent version. I've now run out of ideas and can't find any other suggestions on previous troubleshooting searches. The observation of the drive occasionally being seen for a few seconds/minute after start-up before disappearing seems like it might be a good clue, but I'm not sure how to interpret this. I did get it to play an audio CD a couple hours ago, but after trying to use my drive for something else after that, it's right back into the situation of not being consistently recognized, except sometimes immediately after booting up and then only for a short period. Any help or suggestions you have will be very very welcome -- thank you.

    Honestly since it was recalled due to the sandy bridge recall anyways, it is going to have to go to asus eventually so I would just have them fix both in one shot. The Canada and U.S. support number is the same and I'm sure they could fix both issues at once to save you time: 1-866-625-9873
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • Cannot install DVD/CD ROM drive after upgrading from Windows 7

    I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
    ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

    Hi,
    The error code 31 means that Windows cannot load the drivers required for this device.
    Considering that this issue mostly can be caused by compatible issue.
    Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
    mode to install.
    If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
    dvi:             Rank         - 0x00000000
    Then, corresponds the score in this link:
    Identifier Score
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
    The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
    The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
    Thanks for your understanding.
    Kate Li
    TechNet Community Support

  • T61 DVD/CD-RW drive fails to read and crashes

    Hello Everyone, I hope people still visit this area of the forums!
    I've highlighted and bolded the symptoms to make them easier to find.
    I recently purchased a T61 6457-C15 on eBay, and have been in the proccess of setting up and customizing it to suit my tastes. When I recieved the laptop, it looked as though Windows had been restored to original factory state, plus some free software, so I proceeded under that assumption. First I used Windows Update to download all the updates that it could find including IE8. I wanted to have an anti-virus program running on my computer before I used a browser to access the internet. I ran IE8 and went straight to the Microsoft Security Essentials website and downloaded the Install program. At this point I tried to remove the pre-installed and expired Norton Internet Security using the built-in uninstall, but it failed. A message box popped saying that I needed to put the Norton installation disc in the CD-ROM drive so that the uninstall program could find a Norton support file. My computer did not come with any discs, but my mothe had bought Norton 2008, so I took that disc and put it in the drive. The drive started spinning right away, and the uninstall program found the file it was looking for in a few seconds. The support file directed me to the Norton website to get their removal tool, which removed Norton from my system in short order. Afterwards, I ran the Microsoft Security Essentials install program and got MSE running on my computer before doing anything else.
    Then I went to the Lenovo support website and had it auto-detect my system. That took me to the support page for my system, where I went to the "Downloads and Drivers" page. I downloaded Access Connections and ThinkVantage Toolbox for Vista 32-bit (my OS is Vista Business 32-bit). I then used Lenovo System Update to retrieve all the updates it deemed neccessary from Lenovo, including those for itself and system components, both software and firmware. There were 35 or more updates suggested, and I trusted the software, so I started downloading them all. I'm not sure, but I think that a DVD/CD-RW drive update was included in the list, but I can't remember if it was auxiliary software, drivers or firmware. After Lenovo System Update was convinced that it had all the neccessary updates, I downloaded Revo Uninstaller and set about removing uneccassary and unwanted programs from my computer and trimming the startup list. I did not touch any Windows or ThinkVantage components, and I searched each program online, so I'm sure that I did not delete or disable any drivers or system files, or anything from Lenovo. I mainly removed Apple products and non-functional software from my system, including an integrated camera driver (my system does not have an integrated camera) and third-party programs that were already missing files or otherwise inoperable when I got my computer. Up to this point I had been using a gigabit ethernet connection to download software; I had not used the DVD/CD-RW drive except for the one time I specified earlier.
    Now that I had my system set up to my liking, including personalization and power settings, I started to install my first program: Command & Conquer the First Decade from a DVD-ROM. When I put the disc in the drive and closed it, it took a few seconds for the drive to spin up, and once it did, it was constantly running at high speed and I could hear the reader constantly moving back and forth quickly. After a few minutes the disc's install menu finally appeared, so I clicked on the install button. I waited several minutes but nothing happened, so I tried to view the contents of the drive by going to My Computer > DVD/CD-RW drive (D, right clicking and selecting explore from the menu options. When I did that, the address bar of the My Computer window started to fill up with a dark gray progress bar and said "loading (D", I think with the drive or disc name after it. After it took several minutes to fill completely, nothing happened. I waited a few more minutes to see if anything would change, (nothing did,) I clicked on the X button in the top right corner of the window to close it. A few minutes and clicks later, the My Computer window was labeled as (not responding), and the window itself became grayed-out. I started Task Manager and tried to close the My Computer window, but the entire Windows Desktop disappeared along with it, saying that it would attempt to restart. Even Task Manager became non-responsive and quit after closing My Computer. After a few minutes of staring at my background (and nothing else), I ejected the disc, and Windows Desktop reappeared immediately and acted as if nothing had ever been wrong.
    I checked Device Manager, but neither the DVD/CD-RW drive nor any of the ATA controllers were flagged; in fact they all said they were working properly with up-to-date drivers. I ran the ThinkVantage Toolbox diagnostics on the drive using a data CD, a music CD and a different DVD-ROM, but in each case the drive failed the tests and a message box popped-up saying that the discscould not be read because they were scratched or there was a hardware problem. I checked the discs both before I put them in and after I took them out, and they were not scratched; also, all of the discs are publisher-manufactured from a software or music company. I restarted my computer, booted the Rescue and Recovery option and Ran PC-Doctor from there. I ran the same drive read tests with the same failure results. The entire time the drive was behaving the same way it had when it first failed to read a disc. Next I removed and cleaned the drive both inside and out with a can of compressed air; I also cleaned the ultrabay itself. Finally I tried fixing the problem with Microsoft Fix It, but when it automatically ejected the drive and i put a disc in, the disc became trapped in the drive and Windows froze up like before. I had to restart Windows twice (once with a BSOD) in order to get the disc out. When the disc was removed the computer went back to normal operation once again.
    Please help me, my DVD/CD-RW drive is a Matshi ta UJDA775, my operating system is Windows Vista Business and my T61's model number is 6457-C15. I have tried all the troubleshooting fixes and none have worked. I have tried updating drivers and using diagnostic software and they have not worked. I have tried disabling drag-to-disc burning and it has not worked. I have treid removing and cleaning the drive and that has not solved my problem. I did notice that the driver for the "Intel(R) ICH8M-E/M SATA AHCI controller" is the only related driver that can be rolled back, so maybe that might fix it. I'm also wondering if a firmware change caused this, and if so, if there is any way I can undo that. The only other fix I've heard of that I haven't tried is editing the registry, but I'm hesitant to do that. I haven't tried booting from the CD drive because I have no bootable CDs and I'm worried that my computer might get stuck in that mode. I'm hoping that someone can tell me what I can do to try to fix this problem, preferably without wrecking my computer. Thank you for taking the time to read my post.
    P.S. Just adding a note; I went through both the Microsoft and Lenovo Update histories and the only related updates I could find were: ThinkPad BIOS update, Easy Eject utility, Intel Matrix Storager Manager driver for Windows (32-bit), and maybe one of the two Intel Chipset Support for Vista updates. I tried rolling back the AHCI driver but it had no effect.
    Solved!
    Go to Solution.

    Well, my problem is fixed, and here's how. I had some trouble figuring out how to contact Lenovo technical support; online options directed me to the IBM support website, which was clearly designed for businesses. Selecting the "Call technical support" option on the Lenovo support website and then choosing my country gave me a 24/7 hotline number. After waiting about five minutes on hold, a nice young fellow by the name of "Tyrese" answered (I maybe misspelling his name), but the connection was so bad that we could barely hear each other. Although he semed eager to help, when I told him my problem the first things he suggested were simple, like cleaning the drive, However, when I told him all of my efforts, described above, to fix the problem myself and read him the log from the Rescue and Recovery diagnostic program, after he checked the error codes against his computer database he promptly replied that the only fix was to send out a new drive. I was happy to have gotten such a successful resolution to a support call in less than fifteen minutes; apparently, all the work I had done trying to solve the problem myself had paid off in a way. Unfortunately, although I had tried to spell out my address for him, some of it got left off of the address label, which caused some trouble in receiving the new drive. Once I got it, I installed it using the uninstall & remove (old drive), shut down, start up, insert & install (new drive) method that I referenced earlier in this topic. I've been using the new drive since then without any trouble, so I guess that the only fix was to replace the drive. Also, I noticed that the new drive was a Hitachi, perhaps a T400/410 or T500/510 Ultrabay Slim drive, which should help me avoid the problems that other users were having with the older Matshi-ta drives. I hope this description helps anyone else having a problem with the optical drives on the T61/61p.

  • Satellite A660 DVD/CD-ROM drive does not detect discs

    Hi there,
    I have a Toshiba Satellite A660 with a MAT****A BD-CMB UJ141ES DVD/CD-ROM drive. It is about 18 months old and recently I have noticed that it does not recognise any CDs/DVDs. It makes a couple of noises once inserted but then stops spinning and nothing happens or changes in My Computer view.
    Please note there seems to be no apparent problems with the drive:
    - It is present in My Computer
    - The device is working properly in device manager
    Things I have already tried:
    - Run Microsoft FixIt and CD-ROM/DVD Troubleshooter - both said it could not recognise media
    - Deleted upper filter in the registry as per many suggestions (no lower filter present)
    - Updated driver
    I don't know what else to do. Please help as this is frustrating for a relatively new notebook which never is moved from my desk (don't expect many damaged parts).
    Cheers

    As I said: clean the laser lens
    If you open the CD/DVD drive you will see the small laser lens.
    Use cotton wool tip and alcohol
    > Or at least provide a link?
    Dont know any

  • Hard drive is corrupt after i repair it

    My hard drive reads corrupt after I repair it.  I restart it, hit C, and open it with a startup disk, then repair and restart it.  After a while, when I verify my disk, it says that is corrupt, AGAIN!!
    Please help
    I'm running a mac pro dual core 2 2.66 intel xeon processor, with 16GB of memory  My operating system is  10.6,8

    So you should have already made a couple backups, always have a spare bootable system drive, and in some cases zero it all - takes couple hours, and not use it except as spare extra backup.
    Getting files off your drive now but don't use it,, install OS to a new drive (pull the old one in fact temporary) and you may want to use checksum on all file copies, and for any files not on backup sets try best you can and if you still need help, then turn to Data Rescue 3.
    I would not use a DVD to do repairs, even if it is 10.6.0 or 10.6.3. I would use a clean small system drive with 10.6.8 (takes less than 30GB, even down to 16GB if careful) "emergency boot drive" used only for system maintenance and repairs.
    And if you had Lion, you don't, but, I would use Recovery Mode AND have that also cloned to another drive, using Carbon Copy Cloner (CCC).

  • Satellite P105 - DVD/CD ROM drive does not work

    The DVD/CD ROM drive on my P105 does not work at all.  I've tried the registry fix for the upper/lower limit thing - didn't fix the problem.  The drive does have power, does spin a disk, but it is not recognized by the system.  It doesn't show up in the device manager at all.  I need to get this working and I'm hoping it doesn't need a new drive as this machine is out of warranty (of course!).  Thanks for any and all suggestions on hot to fix this problem.

    Howdy folks. This thread has a lot more views than the one I posted to, but go here to the following message for a possible solution to your CD/DVD Drive issue:
    http://laptopforums.toshiba.com/tshb/board/message​?board.id=brd_gen&message.id=3357&query.id=176774#​... 
    Cheers!
    D.Lex

  • T42 DVD/CDRW Combo drive not reading CDs. System Folder Icon changes. XP Pro SP2.

    Device manager shows correctly 'Ma**bleep**a UJDA755zDVD/CDRW'.
    System Folder icon shows 'DVD/CD-RW Drive (D'
    If I insert a CD, the System Folder icon changes to 'CD-ROM' and displays 'Please insert a disk into drive D:'
    If I insert a DVD, the System Folder icon changes to 'DVD-ROM' and displays 'Please insert a disk into drive D:'
    Am able to burn a CD, but as shown above cannot read. Disabling the drive in device manager, rebooting and re-enabling will make drive read once, rebooting again and it cannot read.
    Using RegEdit to remove LowerLimit and UpperLimit does not help.
    Have updated drive to latest firmware and run (to no avail) Microsoft AutoRun fix.
    Drive works flawlessly  under Ubuntu 8.04.1, seems to be an XPP registry issue, but where?
    Lost at this point, would appreciate any pointers...

    I am having the exact same issue with a brand new T400.  When I insert a CD or DVD into the drive, no spin up occurs.  When I double click on the DVD-ROM/CD drive in My Computer, Windows tells me to insert a disc.
    I've disabled the Automatic Power Savings for the optical drive.  I've also installed the latest firmware and made the regedit changes suggested by Microsoft (UpperFilter/LowerFilter).
    I can't determine whether this is a software bug or hardware failure.  Does anyone have any insight?

  • Settings Dependencies Registry Corrupted

    I was trying to fix some issues with the power management Metro app, and I tried to install the Settings Dependencies driver downloaded directly from Lenovo's website. I did not uninstall the version that was already installed, and it seems that that caused the registry for the driver to be corrupt. Now Solution Center is telling me Lenovo PM Device is disabled, which Device Manager says is because of registry problems. 
    Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
    I have tried uninstalling then deleting the registries in HKLM\System\CurrentControlSet\Control\Class\{[deviceGUID]} and then reinstalling, but the registry issue is still there. 
    Can somebody offer some insight?

    Hey there Huzuodian,
    Have you tried using the system restore function to get back to a point prior to the install and registry corruption? By restoring back before this, the registry will be reset to what it was at that time.
    This article on Microsoft Windows site than can give some insight on the different recovery processes that may provide some options. Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • A library on my hard drive became corrupted, so I over-wrote it from an external hard drive.  When I access the library now on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time.  Ideas to correct this?

    A library on my hard drive became corrupted, so I over-wrote it from an external hard drive.  When I now access the library on my hard drive, many of the images are vertical, and cannot be rotated other than one at a time.  Ideas to correct this?

    You had already done "Repair" and "Rebuild"?  These usually takes scores of minutes or hours.
    Does the Library on your external drive work from the external drive?  Navigate to it in Finder and double-click the name.
    If it does, delete the problem Library, empty the System Trash, reboot, Verify your system disk using Disk Utility (and might as well repair permissions while you're at it), reboot, test the external drive Library once more to confirm it works properly, then close it and copy the Library to your system drive.  When the copying is done, double-click the Library (now on the system drive) and see what you get.

  • T61 no longer recognizes DVD super-multi drive

    My T61 for some reason has stopped recognizing my DVD super-multi drive (GSA-U10N).  I do not use the optical drive often, so I am not sure when during the past couple of months this occured.  I have tried finding it using Lenovo System Toolbox and Device Manager.  I have tried restarting.  I have tried physically removing the drive and putting it back in.  No matter what I try, my T61 says that there is no optical drive.  The little green light next to the drive slot remains on all the time.
    My T61 is a 7662 CTO, Core 2 Duo T7500, 4 GB ram, 100 GB HD, NVIDIA Quadro NVS 140M running Windows Vista Ultimate, 64-bit, SP2.
    Any help or suggestions would be greatly appreciated.

    you should try to run a linux live cd, and see whether the drive is detected. If it is not, then either the cd drive or the motherboard is having a hardware problem. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for

  • DBMS_PROPAGATION_ADM.CREATE_PROPAGATION not available in Oracle 8i

    Hi, I need to propagate message from queue in Oracle 8i to queue in Oracle 9i. From Oracle 9i, I am able to propagate message by creating subscriber and creating propagation by DBMS_PROPAGATION_ADM.create_propagation. I am using same steps to propaga

  • MDNSResponder problem / network traffic reduction measures in effect

    [Part I in a series of "Why Does My Machine Randomly Shut Down And Related Oddities" :-D ] Below you can see a bunch of log output which seems to show a network problem. My connection is not too fast, which I've blamed on my low tier of U-Verse, but

  • Iphone and droid group message problem

    I recently got the iphone 6.  I have a group text comprised of iphone and non iphone users.  If the discussion is just between the non iphone users the messages send properly (as a sms).  However, when an iphone user responds it automatically convert

  • An efficient means of n naming and organizing Groups in the address book

    Hello, First, I hope you are having a nice day. If not, I hope it gets better soon! Next, I would like to provide the following before explaining: Here is an article regarding a novel means of uploading pictures with descriptions from a Mac to Flickr

  • Dead pixel mac book pro retina !!! Im very frustrated

    I'm from Brazil and I bought a mbp retina 13 2 month ago. I have now 2 dead pixels in my screen, and when I called to the apple assistance here in Brazil they told me that they can not fix the problem because I just have 2 dead pixel !!! I can not be