Atapi.sys related error

Hi, I have a T500, and I've been getting blue screen since last night whenever I wake my laptop from standby. I am able to get rid of it by restarting, but it is still concerning.
It's the same message each time:
Technical Information:
Stop: 0x0000007E (0xC0000005, 0xB9EF6B06, 0xBA507310, 0xBA50700C)
atapi.sys - Address B9EF6B06 base at B9EED000, Datestamp 46122eee
I googled the error and saw different places suggesting an update for BIOS or disabling/removing the atapi driver. I don't know what to do, I don't really know much about computers and this is a bit confusing, what should I do?

Satellite L35-S1054
I get a SYS FADR error not responding on a shut down or restart. Will not shut down.
Have reloaded the O/S a few times and changes the hard drive to a brand new one. Same error.
I doubt you get that error immediately after restoring the hard disk to factory specs. If so, it's due to a hardware failure.
More likley, you've accumulated some unwelcome visitors.
When you restore the hard drive, you must be careful to protect yourself from internet vermin prior to accessing the net for updates. It takes only a few seconds to get infected.
-Jerry

Similar Messages

Certificate Related Error Message/Please Help

Today I received an "Unable to verify SSL server pop.gmail.com" message on my Mail server. I transfer mail from gmail to Mail.
"Mail was unable to verify the identity of this server, which has a certificate issued to "pop.gmail.com". The error was:
The certificate for this server has expired.
You might be connecting to a computer that is pretending to be "pop.gmail.com", and putting your confidential information at risk. Would you like to continue anyway?"
In the lower box, it lists the Version, Serial Number, Issuer Name (which is from Zaire, Western Cape, and lists the organization as Thawte Consulting cc and other info, Subject name is Google Inc, common name is pop.gmail.com, then gives a Signature Algorithm, Parameters, etc.
It won't let me Copy and Paste so I have not hit the Continue button for concern of losing that info for reference.
I went to Help which instructed me to do the following:
I'm getting a certificate-related error message
If you get an error message with the word "certificate" in it, make a copy of the message and contact your Internet service provider (ISP) or network administrator. The error message may help them diagnose your problem.
If your mail server uses a self-signed Secure Sockets Layer (SSL) certificate, each time you open Mail you'll see an error message stating that the certificate is not valid. You can continue, but you'll see the same message every time you open Mail. To stop seeing this message, you can permanently accept the certificate.
To permanently accept a self-signed SSL certificate:
Click the Show Certificate button in the error message.
The certificate appears with a certificate icon in the upper-left corner.
Hold down the Option key and drag the certificate icon to the desktop.
Double-click the certificate icon on the desktop, and choose X.509 Anchors from the pop-up menu. Click Add.
The certificate is permanently accepted.
You must have permission to administer the computer for this procedure to work.
For information about encryption, click "Tell me more."
Instead of asking for the "580 Anchors" , it asked simply "Do you want to add the certificates from pop.gmail.com.cer to a keychain?"
I clicked "Add"
The pop.gmail.com certificate AND Thawte Freemail Member AND Thawte Personal Freemail certificates is now entered in my Keychain.
There are no dates listed under "Created" or "Modified" for those certs under Keychain.
IS THIS OK OR DO I HAVE A PROBLEM SINCE THESE THAWTE CERTS ARE LOCATED IN ZAIRE???
IF IT IS A PROBLEM, HOW DO I FIX/CHANGE/OK/DELETE/MODIFY, ETC. IT? PLEASE BE CLEAR.
CAN I/SHOULD I JUST DELETE ALL THREE/SOME OF THE CERTS NOW IN KEYCHAIN?
WILL I STILL BE ABLE TO GET MAIL AS BEFORE THIS MESSAGE IF DELETE THE CERTS?
I believe this is the first time I have received a message concerning certificates so I am naive concerning this.
THANK YOU.

I had similar gmail/cert problem yesterday - not for the first time!
I deleted the prefs (user/library/preferences), deleted the gmail account (mail prefernces), ran applejack ( http://applejack.sourceforge.net/ ) & added the account from scratch.
Annoying I know, and my inbox was 200+ emails but nobody seems to know what or why this happens (my previous post) http://discussions.apple.com/thread.jspa?threadID=243186&tstart=0
Perhaps this is related to certain emails (an email scam), i run 3 macs & the mail account on the affected machine receives my business email & this is the only machine the gmail/cert problem occurs.

A strange Java related error occured when I tried to install a software

When I tried to install Maple 12 on my PC, I got a Java-related error as follow:
java.lang.NoClassDefFoundError: Could not initialize class javax.swing.UIManager
     at javax.swing.JPanel.updateUI(Unknown Source)
     at javax.swing.JPanel.<init>(Unknown Source)
     at javax.swing.JPanel.<init>(Unknown Source)
     at javax.swing.JPanel.<init>(Unknown Source)
     at javax.swing.JRootPane.createGlassPane(Unknown Source)
     at javax.swing.JRootPane.<init>(Unknown Source)
     at javax.swing.JFrame.createRootPane(Unknown Source)
     at javax.swing.JFrame.frameInit(Unknown Source)
     at javax.swing.JFrame.<init>(Unknown Source)
     at com.zerog.ia.installer.LifeCycleManager.g(DashoA10*..)
     at com.zerog.ia.installer.LifeCycleManager.h(DashoA10*..)
     at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
     at com.zerog.ia.installer.Main.main(DashoA10*..)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.zerog.lax.LAX.launch(DashoA10*..)
     at com.zerog.lax.LAX.main(DashoA10*..)
My OS is Windows XP Professional with SP3. However, I managed to install this version on a virtual machine (which also runs Windows XP SP3) therefore the problem does not come from the installer.
What can I do now to install Maple 12? I really need this software...
Thanks!
Edited by: uhobasa on Sep 28, 2008 6:41 PM

Did you find the solution for this problem? I am experiencing the same behavior trying to run Freemind.

Adcfgclone fails with ORA-04063: view "SYS.DBA_NETWORK_ACLS" error

Hi all,
While running adcfgclone on dbtier if fails with following error
ORA-04063: view "SYS.DBA_NETWORK_ACLS" error
here is the scene:
we are trying to clone a production instance for doing some patching
while running adcfgclone on target (test instance) it fails
our current environment is
application:R12.1.3
db:11.1.0.7
os: rhel 5.6
here is output from
autoconfig file:
SQLPLUS Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Apr 18 09:28:32 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
adcrobj.sh exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 2 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/addbperms.sh
script returned:
addbperms.sh started at Thu Apr 18 09:28:32 IST 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/testoba/db/tech_st/11.1.0
ORACLE_SID : TESTOBA
TWO_TASK :
PATH : /u02/testoba/db/tech_st/11.1.0/perl/bin:/u02/testoba/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/testoba/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
Library Path : /u02/testoba/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/testoba/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/testoba/db/tech_st/11.1.0/ctx/lib
SQLPLUS Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
     Changing permissions for file sqlplus.
     Changing permissions for file extproc.
     Changing permissions for file tkprof.
addbperms.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 3 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/perl/bin/perl -I /u02/testoba/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/testoba/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/testoba/db/tech_st/11.1.0/appsutil/perl /u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/txkConfigDbOcm.pl
script returned:
Configuring OCM on the Database Tier....
Testing database connection...
Database connection test passed.
Response file /u02/testoba/db/tech_st/11.1.0/appsutil/clone/adclnocm.res required to configure OCM does not exists
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 4 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/txkcreateACL.sh
script returned:
You are running txkcreateACL.sh version 120.1
The environment settings are as follows ...
ORACLE_HOME : /u02/testoba/db/tech_st/11.1.0
ORACLE_SID : TESTOBA
PATH : /u02/testoba/db/tech_st/11.1.0/perl/bin:/u02/testoba/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/testoba/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
Executing txkcreateACL.sql ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Apr 18 09:28:33 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
FROM DBA_NETWORK_ACLS
ERROR at line 17:
ORA-06550: line 17, column 8:
PL/SQL: ORA-04063: view "SYS.DBA_NETWORK_ACLS" has errors
ORA-06550: line 16, column 3:
PL/SQL: SQL Statement ignored
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
txkcreateACL.sh: exiting with status 1
.end std out.
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv
txkcreateACL.sh INSTE8_APPLY 1
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: RC-50014: Fatal: Execution of AutoConfig was failed
     at oracle.apps.ad.clone.ApplyDatabase.checkAutoConfigErr(ApplyDatabase.java:3192)
     at oracle.apps.ad.clone.ApplyDatabase.runCVMAndAutoConfig(ApplyDatabase.java:3010)
     at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:649)
     at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
     at java.lang.Thread.run(Unknown Source)
please provide any suitable link or doc id or any workaround
thanks
Zavi

Hi;
Please review:
Adautocfg.Sh Fails With "ORA-01422: " While Executing Txkcreateacl.sh [ID 854746.1]
Database Cloning Failed With txkcreateACL.sh[36]: sqlplus [ID 603297.1]
R12 : Autoconfig script txkcreateACL.sh fails with error ORA-31003: Parent /sys/acls/ already contains child entry OracleEBS.xml [ID 1328458.1]
Regard
Helios

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

Difficult import related error, urgent please help

I have 5(file1, file2...file5) export dump file taken from source database (ABC). Export was taken from user level(say user1, user2...user5)(schema level).
file1 = user1 (contain all the information related to user1 )
exp system/manager file=user1 owner=user1 compress=y
And now I have a new database. In this database I have Create new user corresponding to my source instance.
user1,user2..user5.
The problem is when I try to import(the data is getting imported) in user1, it says some grant related error.
I think this error is related to user2, user3..user5. I think when the import is trying to grant(some priviledge) to user1(during import data to user1) whose object is in user2, it is not able to find those object as those object does not exist in user2.
imp system/password file=file1(belonging to user1) fromuser=user1 touser=user1 log=file.log
Please let me know in this situation what can be done. please tell me the solution.
Message was edited by:
sanora600
Message was edited by:
sanora600

Hi!
First of all you should create all users (user1 through user5) before starting import of user1. This ensures that grants granted from i.e user1 to user5 are executed without errors during import of user1.
However, when importing user1, the import does not include grants given from other users, i.e user2, to user1. Grants are owned by the grantor, and therefore grants given is included in exportfile for the grantor.
Hope this helps!
Cheers!

Jquery related error after Apex 4 upgrade

Hi,
We have upgraded Apex 3.2.1 to Apex 4.0.2 but when run the application it gives Jquery related errors. for example Object doesnt support this method or propert.
I have replaced the older jquery library with Apex 4 jquery-1.4.2.min.js file then the application runs fine. but the APEX 4 functionality is not running.
Can you please help to avoid jquery related error?
Regards,
Faheem Raza

I've executed @apexins SYSAUX SYSAUX TEMP /i/ not apxrtins.
Below is the apex_epg_config.sql /tmp output.
SQL> @apex_epg_config.sql /tmp
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as '/tmp/apex/images'
Directory created.
old 47: if '&IMGUPG' != '' then
new 47: if '' != '' then
old 48: l_mv_folder := '&IMGUPG';
new 48: l_mv_folder := '';
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:02:28.69
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.
SQL>

Trying to connect to PhoneGap Build Service in Dreamweaver CS6 but get a "Temporary Server related error". Help!

I am trying to connect to the PhoneGap Build Service in Dreamweaver CS6 but after about a minute I receive the error "Temporary Server related error. Please try again later.". I have googled, searched and implemented any fix that I could find without any joy. I have fully updated Dreamweaver and all other Cloud services but still am receiving the error.
I can log into build.phonegap.com using my Adobe ID no problem and I have linked a GitHub account to my Adobe ID so I am at a loss as what I can try next.
Any help would be much appreciated.
Many thanks,
Dan

You will likely get better program help in a program forum Dreamweaver support forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

SYS FADR error

I have a satellite model L35-1054 and have had the same error. I get a SYS FADR error not responding on a shut down or restart. Will not shut down. Have reloaded the O/S a few times and changes the hard drive to a brand new one. Same error. HELP !

Satellite L35-S1054
I get a SYS FADR error not responding on a shut down or restart. Will not shut down.
Have reloaded the O/S a few times and changes the hard drive to a brand new one. Same error.
I doubt you get that error immediately after restoring the hard disk to factory specs. If so, it's due to a hardware failure.
More likley, you've accumulated some unwelcome visitors.
When you restore the hard drive, you must be careful to protect yourself from internet vermin prior to accessing the net for updates. It takes only a few seconds to get infected.
-Jerry

ORA-04063: package body "SYS.DBMS_SQLTUNE" error while upgrading

Hi,
i am trying to upgrade oracle database 10.2.0.2 to 11.2.0.1 with dbua tool. While upgrading 'Oracle Server' ORA-04063: package body "SYS.DBMS_SQLTUNE" error has occured.
In oracle server log :
Rem Create the automatic SQL Tuning task
Rem If the task already exists (catproc is being re-run), do not error.
begin
2 sys.dbms_sqltune_internal.i_create_auto_tuning_task;
3 exception
4 when others then
5 if (sqlcode = -13607) then -- task already exists
6 null;
7 else
8 raise;
9 end if;
10 end;
11 /
begin
ERROR at line 1:
ORA-04063: package body "SYS.DBMS_SQLTUNE" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_SQLTUNE"
ORA-06512: at line 8
After unsuccesful upgrade i restore and recover the database. SYS.DBMS_SQLTUNE package and package body were valid. But when i compile them the package body becomes invalid.
I search the error and reach 390221.1 metalink note:
Solution
- Drop synonyms
drop public synonym existsnode;
drop public synonym extract;
But there are no synonyms that is mentioned in this note in my db.
How can i resolve this problem? Thank you.

Have you not read the note ORA-04063: package body "SYS.DBMS_SQLTUNE" has errors - Upgrade From 10G To 11G Fails On Dbms_sqltune ID 1271490.1+ ?
Nicolas.

Tcpip.sys related BSOD in Vista at either wifi/ ethernet network connection with my university

Dear all,
laptop:: Lenovo X61s 3G L7700
OS version: windows Vista business Sp1
tcpip.sys version: 6.0.6001.22167
wifi: Intel 4965AGN. Standard Gigabyte intel ethernet 82566MM
system drivers and BIOS are the most updated driver.
At my 2 homes using ADSL routers, there are absolutely no problems with network connection by wifi or ethernet. However, blue screen occurs when I bring this laptop to university and connect to the network via either ethernet or wifi. This happened to me a few months back. It crashed EVERY TIME when a network connection was attempted. It did not matter whether I updated my drivers on both wifi or ethernet cards. Whenever I bring it to either of my2 homes, no blue screen ever occurs.
It also happens when I attempt to connect to free wifi network in the airport. It crashes again with EXACTLY the same problem. I have to admit that I do not even where to start looking for the problems. System restore did not solve this either. I ran the WinBug analysis. It pointed towards tcpip.sys. My sys ver is at the top of this message.
Would appreciate if someone can point this to the right direction. I am seriously thinking of downgrading this to XP, since it had NEVER happened to XP.
thanks,
VIncent
WinBug analysis:
Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\vincentyip\Desktop\Mini011709-09.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008 Kernel Version 6001 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6001.18145.x86fre.vistasp1_gdr.080917-1612
Kernel base = 0x8200b000 PsLoadedModuleList = 0x82122c70
Debug session time: Sat Jan 17 21:04:50.693 2009 (GMT+0)
System Uptime: 0 days 0:08:18.357
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 1000007F, {8, 803d3130, 0, 0}
Unable to load image dne2000.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for dne2000.sys
*** ERROR: Module load completed but symbols could not be loaded for dne2000.sys
Unable to load image Epfwndis.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Epfwndis.sys
*** ERROR: Module load completed but symbols could not be loaded for Epfwndis.sys
*** WARNING: Unable to verify timestamp for epfw.sys
*** ERROR: Module load completed but symbols could not be loaded for epfw.sys
Probably caused by : tcpip.sys ( tcpip!WfpAuditEventGeneral+1cb )
Followup: MachineOwner
1: kd> !analyze -v
*                        Bugcheck Analysis                                    *
UNEXPECTED_KERNEL_MODE_TRAP_M (1000007f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
        use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
        use .trap on that value
Else
        .trap on the appropriate frame will show where the trap was taken
        (on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 00000008, EXCEPTION_DOUBLE_FAULT
Arg2: 803d3130
Arg3: 00000000
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0x7f_8
CUSTOMER_CRASH_COUNT: 9
DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 8a67c8da to 8203f6c0
STACK_TEXT:
8cf21274 8a67c8da 00000000 8cf21534 00000000 nt!SeReportSecurityEventWithSubCategory+0xe
8cf2154c 8a67cb3f 00003900 8cf216dc 8a67696d tcpip!WfpAuditEventGeneral+0x1cb
8cf21558 8a67696d 8cf21588 00000000 8cf21848 tcpip!KfdAuditEvent+0x38
8cf216dc 8a676709 0000001c 8cf219e0 8cf21848 tcpip!IndicateDropAudit+0x1ac
8cf217e0 8a67cddb 0000001c 0000001d 8cf219e0 tcpip!ShimIndicateDiscard+0x3e
8cf2181c 8a63025b 0000001c 8cf219e0 8cf21848 tcpip!ShimIndicateDiscardGeneral+0x50
8cf219f0 8a696833 00000011 00008900 00008900 tcpip!WfpInspectReceiveControlShimV4+0x2fb
8cf21a80 8a679a9f 00000002 86a52dc0 869ca000 tcpip!ProcessIcmpErrorClassify+0x1cf
8cf21d0c 8a67cf6f 00000001 00000002 00000000 tcpip!WfpProcessInTransportStackIndication+0xe1
8cf21d60 8a618e27 86a52dc0 00000002 00000001 tcpip!InetInspectReceiveDatagram+0xce
8cf21d94 8a618c2e 869d2668 b6aad4c8 a8396220 tcpip!RawBeginMessageIndication+0x35
8cf21de8 8a67657e 869d2668 00000002 00000000 tcpip!RawDeliverDatagrams+0xf9
8cf21e28 8a676105 869d2668 00000000 8cf21e64 tcpip!RawReceiveDatagrams+0x10d
8cf21e38 8a67402b 8cf21e4c c000023e 00000000 tcpip!RawNlClientReceiveDatagrams+0x12
8cf21e64 8a673dee 8a6cd19c 8cf21ec0 c000023e tcpip!IppDeliverListToProtocol+0x49
8cf21e84 8a673d34 8a6cac68 00000101 8cf21ec0 tcpip!IppProcessDeliverList+0x2a
8cf21edc 8a6734ec 8a6cac68 00000001 00000000 tcpip!IppReceiveHeaderBatch+0x20a
8cf21f6c 8a671fe6 879b6c90 00000000 820ee401 tcpip!IpFlcReceivePackets+0xbe1
8cf21fe8 8a67252e 89dfbbe8 89d16bf0 00000000 tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x6e3
8cf22010 8a5400b0 89dfbbe8 89d16bf0 00000000 tcpip!FlReceiveNetBufferListChain+0x104
8cf22044 8a532919 00dfb830 89d16bf0 00000000 ndis!ndisMIndicateNetBufferListsToOpen+0xab
8cf2206c 8a532890 00000000 00000001 87c840e8 ndis!ndisIndicateSortedNetBufferLists+0x4a
8cf221e8 8a47357f 87c840e8 00000000 00000000 ndis!ndisMDispatchReceiveNetBufferLists+0x129
8cf22204 8a5452ba 87c840e8 89d16bf0 00000000 ndis!ndisMTopReceiveNetBufferLists+0x2c
8cf22250 8a53fba0 02c840e8 8cf22294 00000001 ndis!ndisMIndicatePacketsToNetBufferLists+0xe9
8cf2228c 8a565bfc 85756ef8 8796aa54 89dd87c4 ndis!ndisLWM5IndicateReceive+0x31d
8cf222b0 8df0e67a 879b6d10 8796aa54 89dd87c4 ndis!EthIndicateReceive+0x1f
WARNING: Stack unwind information not available. Following frames may be wrong.
8cf22334 8deffa73 89df7020 89dd8778 89dd87c4 dne2000+0x1767a
8cf22360 8a565570 89df7020 89dd8778 89dd87c4 dne2000+0x8a73
8cf223d0 8ebe5f49 c000009a 8cf22400 00000001 ndis!ethFilterDprIndicateReceivePacket+0x2fc
8cf223f8 8ebe6f3b 89dd8778 00000000 87c99008 Epfwndis+0x2f49
8cf2243c 8ebe49cb 830020cc 89b582d8 00000008 Epfwndis+0x3f3b
8cf22488 8a5487fe 87bc3b80 87434d60 87bc3c38 Epfwndis+0x19cb
8cf224a4 8a548938 87bc3b80 87434d60 00000000 ndis!ndisDummyIrpHandler+0x72
8cf22594 820c6fd3 87bc3b80 87434d60 875ac9a8 ndis!ndisDeviceControlIrpHandler+0xe4
8cf225ac 8fd91011 89b0cbdc 875ac9a8 00000000 nt!IofCallDriver+0x63
8cf225d4 8fd91148 875ac9a8 875acffe 89b582d8 epfw+0x7011
8cf225ec 8fd8b1cb 89b0cbdc 8fd99924 830020cc epfw+0x7148
8cf2262c 8fd91bf3 89b0cb18 89b582d8 84e99264 epfw+0x11cb
8cf22640 8fd946a7 89b0cb18 89b582d8 84e99264 epfw+0x7bf3
8cf2268c 8a5a980a 86992548 00000089 876cf3d8 epfw+0xa6a7
8cf227f8 89b9af4e 0000044c 89b0cb18 89b582d8 NETIO!PopulateContext+0x2f
8cf228d0 8a5aa7a4 00000000 89b1bb6d 00002711 0x89b9af4e
8cf22964 8a5ae5ed 8a5d3324 8cf229e4 00000000 NETIO!MatchCondition+0x4b
8cf229ac 823cb5b0 876cf3b8 84916500 00000000 NETIO!KfdAleAcquireEndpointContextFromFlow+0x82
8cf229bc 8cf22a18 876cf3f8 8cf229e8 8a5ae3f7 hal!KfLowerIrql+0x64
00000000 00000000 00000000 00000000 00000000 0x8cf22a18
STACK_COMMAND: kb
FOLLOWUP_IP:
tcpip!WfpAuditEventGeneral+1cb
8a67c8da 5b              pop     ebx
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: tcpip!WfpAuditEventGeneral+1cb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: tcpip
IMAGE_NAME: tcpip.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4812c4ce
FAILURE_BUCKET_ID: 0x7f_8_tcpip!WfpAuditEventGeneral+1cb
BUCKET_ID: 0x7f_8_tcpip!WfpAuditEventGeneral+1cb
Followup: MachineOwner

Per my original post:
"When my ATV is connected via ethernet, and I attempt to play some internet radio stations, some will work just fine while others won't. For example, when connected to my home network via ethernet, some internet radio channels (I can't give a percentage because I haven't tested all of them) will play just fine, however, others won't. The ATV will attempt to connect, but the spinning progress bar just goes and goes and goes until it eventually errors out (no error number is provided, it just says that there was trouble loading the content). The funny thing (or not so funny thing actually) is that if I unplug the ethernet cable, and connect my ATV to the network via wifi, those same stations that didn't play when ATV was connected via ethernet, WILL play when ATV is connected via wifi. So, in short, some stations play just fine when ATV is connected to home network, through wireless router, via either wifi OR ethernet, yet some will only play when ATV is connected to home network via wifi. I have found this to be the same when it comes to downloading or refreshing the photos in my photo stream. If I throw new photos in my photo stream on iCloud, and the ATV is connected via ethernet, they won't refresh to the ATV, however, if I unplug the ATV and connect via wifi they begin to refresh."
There are dozens of original threads out there that report of similar - if not exact, issues. I have contacted "Roy" per his request and not heard back from him (if such a person exists). I have "restored" my ATV and rebooted all equipment to no avail. Until Apple gets with it, acknowledges their problem, and fixes it, I am resigned to just having to deal with switching back and forth from wifi to ethernet, and so on.

An Error Occurred While Processing Your Request We're sorry. While processing your request, we encountered a system-related error. Your request was not processed. Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23

Every time i log out of my Bank email after getting a copy of transactions, I get the following:
An Error Occurred While Processing Your Request
We're sorry. While processing your request, we encountered a system-related error.
Your request was not processed.
Error ID Code: b7bc5afa-ce52-434b-bfb6-3fb086b77a23
If the error continues or you need to contact support, please provide them with the Error ID Code above.
That's what I am doing. contacting support.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Disk related error (-43)

Hey guys, I recently bought an imac G3.
I am trying to install itunes 1.1 on it however i come across a problem.
When i double click on the itunes installer and application called "stuffit"
opens. This says its "decoding macbinary II".
I then get an error message saying:
"sorry, but a disk related error (-43) has prevented the operation from concluding."
Can anyone help me??
thanks, lozzdude.

Have you verified that iTunes will run on Mac OS 9.2?
You should try dragging the iTunes download onto stuffit.
Robert

Expdp with ORA-04063: package body "SYS.DBMS_CUBE_EXP" error

Hi,
I try to use expdp to export all tables from schema BAW, but hit the following error. Oracle version is 11.2.0.2, and the package body "SYS.DBMS_CUBE_EXP" is invalid. Any idea to fix it?
Starting "BAW"."SYS_EXPORT_SCHEMA_01": baw/******** directory=DATA_PUMP_DIR met
rics=yes schemas=baw dumpfile=baw.dmp
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS [
ORA-31642: the following SQL statement fails:
BEGIN "SYS"."DBMS_CUBE_EXP".SCHEMA_CALLOUT(:1,0,1,'11.02.00.02.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 1245
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 8353
----- PL/SQL Call Stack -----
object line object
handle number name
7000004c9656fe0 19208 package body SYS.KUPW$WORKER
7000004c9656fe0 8385 package body SYS.KUPW$WORKER
7000004c9656fe0 12748 package body SYS.KUPW$WORKER
7000004c9656fe0 2546 package body SYS.KUPW$WORKER
7000004c9656fe0 9054 package body SYS.KUPW$WORKER
7000004c9656fe0 1688 package body SYS.KUPW$WORKER
7000004c9659720 2 anonymous block
object line object
handle number name
7000004c9656fe0 19208 package body SYS.KUPW$WORKER
7000004c9656fe0 8385 package body SYS.KUPW$WORKER
7000004c9656fe0 12748 package body SYS.KUPW$WORKER
7000004c9656fe0 2546 package body SYS.KUPW$WORKER
7000004c9656fe0 9054 package body SYS.KUPW$WORKER
7000004c9656fe0 1688 package body SYS.KUPW$WORKER
7000004c9659720 2 anonymous block
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS [
ORA-31642: the following SQL statement fails:
BEGIN "SYS"."DBMS_CUBE_EXP".SCHEMA_CALLOUT(:1,0,1,'11.02.00.02.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 1245
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 8353
----- PL/SQL Call Stack -----
object line object
handle number name
7000004c9656fe0 19208 package body SYS.KUPW$WORKER
7000004c9656fe0 8385 package body SYS.KUPW$WORKER
7000004c9656fe0 12748 package body SYS.KUPW$WORKER
7000004c9656fe0 2546 package body SYS.KUPW$WORKER
7000004c9656fe0 9054 package body SYS.KUPW$WORKER
7000004c9656fe0 1688 package body SYS.KUPW$WORKER
7000004c9659720 2 anonymous block
Job "BAW"."SYS_EXPORT_SCHEMA_01" stopped due to fatal error at 16:07:26
e

The simple solution to this problem is, and its working perfectly with me on 11gR2 resolving the subject error.
To avoid this problem, perform relational exports excluding OLAP's Analytic Workspaces.
1) Remove workspace package from export:
a. Connect sys/password as sysdba
b. create table sys.exppkgact$_backup as select * from sys.exppkgact$;
(Backup package before deleting it)
c. delete from sys.exppkgact$ where package = 'DBMS_CUBE_EXP' and schema= 'SYS';
d. commit;
4) Run the export.

Ora-06502:pl/sql and ora-06512 at sys.owa_util errors

Greetings -
I have just installed APEX 2.2 in my 9.2.0.7 database and am going through the exercises in the "2 Day+ Application Express Developer's Guide." I was making good progress, until I got to Chapter 5, How to Control Form Layout. I created the script "ht_emp", as instructed. Everything in the script works, except for the "create or replace trigger bi_ht_emp" part. It fails with the following errors:
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL", lone 328 ORA-06512: at "SYS.HTP", line 862 ORA-06512: at "SYS.HTP", line 977 ORA-06512: at "SYS.HTP", line 995 ORA-06512: at "FLOWS_020200.WWV_FLOW_SW_API", line 428 ORA-01003: no statement parsed. I have confirmed that nls_length_semantics = BYTE
Any suggestions?
Thanks in advance - Gail

Scott -
Here's the part of the script that chokes --
CREATE OR REPLACE TRIGGER bi_ht_emp
BEFORE INSERT ON ht_emp
FOR EACH ROW
BEGIN
SELECT ht_emp_seq.nextval
INTO :new.emp_id
FROM DUAL;
:new.rec_create_date := SYSDATE;
END;
Thanks fro helping -
Gail

Atapi.sys related error

Similar Messages

Maybe you are looking for