ATC: compliance screening
hi,
when i create delivery note, a message pop up. But the delivery note still able to process, pls advice
ATC: compliance screening
communication failure with compliance engine
no compliance blocks were set
delivery should be checked manually
My guess is that someone has been toying with Foreign Trade config OR GTS integration. You may wish to refer to your on site SAP consultant for the settings they have made.
Similar Messages
-
Dear Experts,
I am getting below error while doing f111.
Company codes 1100/1100 do not appear in proposal 29.05.2011 00008R; correctMessage no. FZ003
In the LogNo check can be made in SAP GTS in an automatic payment processMessage no. FIPAY_GTS001Run is continued. System writes entries for subsequent checkMessage no. FIPAY_GTS006?
Is there something related with GTS i am doing testing in Ides.
Thanks in Adv.
SN.NOORIEYes, this is related to SAP GTS. I think you have GTS (Compliance screening) activated for your FI payment through ECC or R/3.
Check these two note for further information and touch base with your GTS consultants.
1. Note 850365
2. Note 1027403
From your error message, it seems the organizational setup is not proper.
Cheers,
Abir -
GTS 7.2 - Error with account assigned purchase order without material
All,
I am creating an account assigned purchase order without any material master in the feeder system (ECC 5.0) and it a standard SAP functionality.
I am getting the following GTS related pop up message and documents are posted to technically incomplete documents in GTS 7.2.
"Legal Control: Custs Prod. Mast. Required
Material "
Any ideas on how get rid of this error message
Edited by: James Puzon on Oct 3, 2008 9:32 PMJames,
Even though material numbers are not mandatory on POs in the feeder system (ie in ECC) they ARE mandatory in SAP-GTS.
This means that every line item (PO, SO, delivery) that is sent to GTS for compliance screening or Customs processing MUST have a material number in the feeder system. You have a couple of options to resolve this:
1. Always use a material number on all transactions that you enter in your feeder system if they are exports or imports (ie relevant for GTS). You can create service materials or "dummy" materials in ECC for items such as user manuals, warranties or installation services that are part of a particular shipment.
2. You can add logic in the interface for GTS to always transfer a particular material number to GTS if the material number is blank on the line item of the feeder system document. Ideally you would want to link this custom logic to a custom maintenance table in ECC so that you can easily change the material number that is sent to GTS without having to change the code.
3. Override the error message by changing the message type to a warning or informational message (not recommended because this would require a small code modification because I don't think the message type is configurable for this error). Even if you did make this code change you would likely run into more issues in GTS because license determination and other GTS services need a material number to function properly.
Hope this helps.
Sascha -
Required this 'dd.mm.yyyy HR:MM:SS'
Hi,
i am writng a syntax below. my requirement is date and time should be in dd.mm.yyyy HR:MM:SS' format.
How to do it??
data:l_header type string.
concatenate 'HDR' 'AEB Compliance Screening' '3.1' SY-DATUM SY-UZEIT
into l_header separated by ';'.
append l_header to gt_lfa1.hi,
Please try this:
data:l_header type string.
data w_date type char10.
data w_time TYPE char8.
Write sy-datum to w_date.
write sy-uzeit to w_time.
concatenate 'HDR' 'AEB Compliance Screening' '3.1' w_date w_time
into l_header separated by ';'.
Append
Regrads,
Komal
Edited by: Komal Lakhwani on Feb 9, 2010 7:26 PM
Edited by: Komal Lakhwani on Feb 9, 2010 7:26 PM -
ADA Fixes for Robohelp: Frames & CSS Issues
Fellow Robohelpers:
I am attempting to resolve a set of major issues within Robohelp 8
a) Frames are not properly named in Robohelp 8. Is anyone aware with which files to change (post generation or pre-generation of outputs) to rename Frames so the visually impaired user is clearly informed which frame they are on
b)When you disable CSS, the navigational elements (frames) become a jumble. They do not function correctly (TOC, Index, Search) since Robohelp is heavily CSS dependent and hides objects (text fields, the various left hand navigational elments) behind CSS.
Any reccomendations how to resolve these, or insights as to how to make Adobe aware of this! I have been reaching out to them about this for quite some time! I am hoping capturing a workaround for at least a) will make the tool one step closer to ADA compliance (screen reader compliance)
Thanks
YaseenHi,
I guess your output is WebHelp. First, try to create 'Section 508 compliant' output or pure HTML output. This may solve quite a bit of your problems.
If you don't want that output, this is what I think:
a) RH nests a lot of frames, but start looking at the launch file, the csh.htm file, whskinfrmset01.htm and whskin_frmset010.htm. Note that if you change the names of frames, this may cause some scripts to stop functioning...
b) As for the CSS issues, the only way to make that work is to manually sort out all problems and amend the javascripts.
If you want to let Adobe know your wish, use the wish form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
Greet,
Willam -
Hi All,
My requirment may sound a bit vauge but i want to know what all are the scripts a Oracel DBA must have?
Scripts which are releated to monitoring,maintenance and performance realetd.
Kindly shre the same, if you have the same.
BR
Sphinxhi sphinx,
that is like asking a cook to tell you all the receipts and tools for his favourite dishes.
Although there are common tasks, everyone (I believe) has his own scripts and issues to monitor.
depends on your tasks.
I would suggest that you define your responsibilities, and from there look for, build, or ask for specific scripts or help for speciific tasks.
your tasks may involve:
- db space monitoring
- os space monitoring
- performance issues
- backup monitoring, execution
- user creation
- lock problems.
- error solving
For most of them you can use Grid Control for an overview, or alerts.
You can use the compliance screen (even though some violations may be difficult to correct due to current processes).
contribution (checks tablespace total and free space in MB):
Select d.tablespace_name ,sum(d.bytes/1024/1024) totalMB,sum( s.bytes/1024/1024) freeMB from dba_data_files d, dba_free_space s where s.tablespace_name=d.tablespace_name group by d.tablespace_name;now adjust it for percentages (more useful).
br,
pinela.
Edited by: Pinela on Aug 28, 2012 11:01 AM -
Canadians, Post your GSP gripes on US ebay, it's now 'Selling'
Heaven or Lithium alone knows why the old thread suggesting this was both bumped and locked, but the point remains valid. Go to the US 'selling' board and post your gripes there, and keep posting them because amalgamating half a dozen boards makes posts vanish of the front page in a few hours. The thousands of posts in the pinned threads if posted where sellers might have some chance of seeing them would satnd more chance of being an eye opener to the often unaware US sellers using this program.
I am a US seller and if not for my International Buyers posting on the US site I would hae had no clue as to this GSP program for two reasons:
1. I do not use it and never will so when it came out I never even paid attention to the program
2. I was only reading US Sellers complaints on occasion. What perked my interest was the "confiscating" and reselling of items that the GSP center was deeming undeliverable or items that could not be shipped to another country that I knew could be.
I was shocked to discover "Art" or Guitars" or Certain clothing with Fur was being confiscated and resold on eBay by a company that is partnered with PB and eBay
I was shocked to hear packages were being opened and repacked?
I was shocked to READ that fees some buyers were paying for duties, taxes and tariffs appeared to not only be unrequired in many cases, but also possibly not being paid to the entities the money was being collected for when those taxes or customs fee's were not required?
Then after digging around and reading the buyers terms and conditions pages on your ebay sites because I do not see the buyers terms and conditions on the US site I was shocked even further at all the legal mumbo jumbo and the talking in circles...they cover themselves legally every way they can and the buyer is really the one eating it.
This program is nothing exceot a profit making service. It would not exist if profits were not had to be made plain and simple. Shipping as a small seller, heck shipping period should never be a profit making scheme. If my buyer pays me and for some reason shipping comes to less I refund the difference. I have felt guilty in the past when postage was even 50 cents less!
To boot why would any buyer pay double shipping costs? You buyers are paying for the cost of us US sellers to shlp your item to the US center...that's one postage fee, then you pay again to FedX for the international shipping costs and all the other fee's they tack on that cover the following costs for PB and GSP:
International priority shipping" (or "Shipping"): this Program Fee consists of charges associated with the parcel processing and shipping services described above and is comprised of the following variable amounts: your Seller's shipping charges to ship your order to the U.S. Shipping Center; third party international shipping charges to ship your order from the U.S. Shipping Center to your designated delivery address;
fuel surcharges; charges for selling, general, and administrative expenses, hardware, software development and licenses, operations, and hosting by Pitney Bowes;
charges from third party parcel processing service providers and for the management of the parcel processing service providers and related software systems;
charges relating to the management of insurance for lost or damaged items; charges for operational expenses associated with short-term loss recovery and the management of variances between the quoted Shipping amount and actual costs; and any referral fees paid by Pitney Bowes to eBay for referring you to the Program.
"Import charges": this Program Fee consists of charges associated with the customs service described above and is comprised of the following variable amounts: sales, goods and services, and value added taxes, duties, tariffs, excise taxes, and other amounts assessed or levied by any government authority in connection with the importation of goods into the applicable country of importation
(but excluding income taxes) ("Commodity taxes"); third party brokerage fees (including advancement and disbursement charges and customs brokers handling and filing fees); penalties
(but excluding any customs duties, taxes, surcharges, fines, penalties, or other charges which may be imposed on you by customs or tax officials after a GSP Item has successfully cleared customs and been delivered to, or made available for pickup at, the delivery address that you specify); classification charges associated with the assignment of a Harmonized System ("HS") classification code;
charges for export compliance screening and verification and the assignment of an Export Control Classification Number (ECCN); and operational expenses associated with short-term loss recovery and the management of variances between the quoted Import charges and actual costs.
Note: at eBay's discretion, applicable classification and export compliance charges, third party brokerage fees, and operational expenses may instead be included within the Shipping amount that is quoted to you. -
508 compliance--Playback control shortcuts and screen readers
Reference to 508 compliance. If you publish the SWF file to
include the playback control bar what keyboard shortcuts work
and/or can you program them? What will screen readers programs do
with the playback control buttons?Hmmm, so if I'm understanding the situation correctly, the
ideal response would work like this?
User types some text and is SUPPOSED to press Enter to
evaluate the text. Instead, they press Tab. Immediately upon
pressing Tab, they might see a message of some sort advising the
action is incorrect and further advising that Enter is the correct
action.
I could see this possibly happening a couple of different
ways.
1. You could insert a click box configured with a Success
caption containing the advisory information. Then set the shortcut
keystroke for the click box object to be Tab. End result should be
that the user presses Tab, sees the success caption (which looks
like a failure caption, since they didn't do what was expected) and
the action of the click box would result in re-displaying the slide
with the Text Entry box. (You do this by pointing at a .1 second
slide immediately preceding the slide with the Text Entry box.)
2. You could possibly configure the Text Entry box so that
either Enter or Tab will serve as the shortcut. You do this by
modifying the Text Entry box properties so it includes a Button as
the trigger. The trick is to assign the Enter key to the Text Entry
box itself and the Tab key to the button. (or vice-versa) Then you
configure the button so it's invisible.
Hopefully one of these helps... Rick -
Screen Reader/508 Compliance - Robohelp
Hello Fellow Robohelpers!
I wanted to see if any of you great minds could assist me
with a pending issue.
I need to verify with my client that RH truly is "508"
compliant. They would like to know how to:
- ensure that the text size changes in RH when you change the
font size for your browser (smallest to largest) - currently, RH
text does not change in size
- how do you tab away from 'drop lists' or 'pop-ups' in RH
without using a mouse
Apparently, there are other 508 complianec requirements as
well too. I did review the documentation Adobe provides, but it
does not provide specific keystrokes to verify their
allegations/proof.
Hope you can help or direct me where I can find such useful
information!
Thanks!In HTML at least, changing font sizes in the browser has more
to do with the styles than with RH's 508 compliance. Current
standards are to style text using percentages rather than fixed
point or pixel values for sizes. So this is up to the help author
rather than being something RH will manage automatically.
Apparently, browsers contain settings that allow the viewer to
override text and color settings (see
this W3C page). But
its nice to not force them to do that.
When it comes to resizing text on skins or in the HTML Help
interface, someone else would have to comment on that, as well as
the rest of your question.
--Ben -
Limit to Custom Screen Reader Text for 508 Compliance
I am converting forms for a government Agency. The forms must be Section 508 compliant. Some pages of the forms are full pages of instructional text. I am using a single field to contain all of the accessibility text so that I can control the flow of information through the tab order with limited additional tabbing from the original version. I am adding all of the text in a Jaws friendly format into the Custom Screen Reader Text field under the Accessibility tab in the Object window. When I test the form, Jaws stops reading the Accessibility text about 980 characters in. The only way to get it to read the text in its entirety is to use the down arrow key, which forces the Jaws reader to read it line by line. This is not desirable. Has anyone else experienced this? Why is there a seemingly arbitrary limit to how much Accessibility text that can be passed to Jaws?
I am using Livecycle 7.1 and testing in Acrobat Professional 7 and Adobe Reader 8 with Dynamic PDF 7.0.5.An associate in the field told me this is not a problem with Adobe's product. Rather it is a problem with Jaws. Apparently he has the same problem with Jaws and IBM Workplace Forms.
-
Appearing blank screen in compliance calibrator url
hi
i have recently installed java front end part of SAP GRC patches on a sap java server. and i have crated jco connections to connect to backend sysems. but after that , when i see with following url
http//<server_name>:5<instance>00/webdynpro/dispatcher/sap.com/grc~ccappcomp/Compliance
Calibrator
i can see the above heading as SAP GRC and all, but no content i can see.
did any body face this kind of problem--- please help
thanks
AkhilHi Akhil,
You need to upload all the Standard UME roles provided by SAP onto the UME of GRC Server. You can find all these roles in VIRSAACCNTNT.sar files in the GRC AC package. When you'll un-car this file it will extract files having all the AC roles and you need to upload them in UME and assign users with all the necessary roles.
The files would be re_ume_roles.txt; cc_ume_roles.txt and ae_ume_roles.txt.
All the best!
Cheers!
Aman
GRC RIG -
Blue screen of death on Toshiba P755-S5375 with ADOBE ENCORE CS6
I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring.
Unfortunately, although the computer and software works fine for video capture and editing, I am unable to author a blu-ray. For authoring, I am using Adobe’s Encore CS6. After checking and previewing my creation, I attempt to build to disc using Encore. About 2 seconds after clicking the build disc in Encore, I get the “blue screen of death” (BSOD). This happens every time I try to build to blu-ray (only blu-ray has this issue; I am able to build to a DVD). I am using an external blu-ray drive on USB 3.0.
I am using Encore version 6.0.0.492
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
Manufacturer: Toshiba
Manufacturer Part Number: PSAY1U-05U027
Product Line: Satellite
Product Series: P755
Product Model: P755-S5375
Product Name: Satellite P755-S5375 Notebook
Product Type: Notebook
Processor Manufacturer: Intel
Processor Type: Core i7
Processor Model: i7-2670QM
Processor Speed: 2.20 GHz
Processor Core: Quad-core (4 Core)
Cache: 6 MB
Chipset Manufacturer: Intel
Chipset Model: HM65 Express
Standard Memory: 4 GB
Memory Technology: DDR3 SDRAM
Memory Standard: DDR3-1333/PC3-10600
Number of Total Memory Slots: 2
Hard Drive Capacity: 500 GB
Screen Size: 15.6"
Display Screen Type: Active Matrix TFT Color LCD
Aspect Ratio: 16:9
Screen Mode: WXGA
Backlight Technology: LED
Screen Resolution: 1366 x 768
Graphics Controller Manufacturer: Intel
Graphics Controller Model: HD 3000
Graphics Memory Capacity: 1.65 GB
Graphics Memory Accessibility: Shared
Ethernet Technology: Fast Ethernet
Wi-Fi: Yes
Wi-Fi Standard: IEEE 802.11b/g/n
Webcam: Yes
Operating System: Genuine Windows 7 Home Premium with SP1
Operating System Architecture: 64-bit
Pointing Device Type: TouchPad
Number of Cells: 6-cell
Battery Chemistry: Lithium Ion (Li-Ion)
Width: 15.0"
Depth: 9.8"
Weight (Approximate): 5.40 lb
Package Contents:
Satellite P755-S5375 Notebook
Lithium Ion Battery
AC Adapter
Green Compliant: Yes
Green Compliance Certificate/Authority: RoHS
Installed programs:
Name Version
Microsoft Application Error Reporting 12.0.6015.5000
Microsoft Office Click-to-Run 2010 14.0.4763.1000
Microsoft Office 2010 14.0.4763.1000
Windows Live Essentials 15.4.3502.0922
Apple Application Support 2.1.7
Windows Live Writer 15.4.3502.0922
Microsoft_VC90_MFCLOC_x86 1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application 2.0.3.3
Windows Live Messenger 15.4.3538.0513
Microsoft_VC90_CRT_x86 1.00.0000
Google Toolbar for Internet Explorer 1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU] 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 10.0.40219
Toshiba Online Backup 2.0.0.31
TOSHIBA ReelTime 1.7.21.64
Windows Live Remote Client Resources 15.4.5722.2
Windows Live SOXE Definitions 15.4.3502.0922
Adobe AIR 3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections 15.4.5722.2
Windows Live Communications Platform 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
Apple Software Update 2.1.3.127
Windows Live UX Platform Language Pack 15.4.3508.1109
Windows Live Photo Gallery 15.4.3502.0922
bl 1.0.0
Windows Live Mail 15.4.3502.0922
Java(TM) 6 Update 25 6.0.250
MSVCRT_amd64 15.4.2862.0708
TOSHIBA Face Recognition 3.1.17.64
ph 1.0.0
Adobe Widget Browser 2.0.348
Windows Live Writer 15.4.3502.0922
Mesh Runtime 15.4.5722.2
TOSHIBA Supervisor Password 1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch 10.1.1
Adobe Reader X MUI 10.0.0
TOSHIBA Media Controller Plug-in 1.0.7.5
Windows Live Photo Gallery 15.4.3502.0922
Windows Live Photo Common 15.4.3502.0922
Label@Once 1.0 1.0
PDF Settings CS6 11.0
Toshiba Book Place 2.2.7530
Windows Live PIMT Platform 15.4.3508.1109
TOSHIBA Wireless LAN Indicator 1.0.5
D3DX10 15.4.2368.0902
Utility Common Driver 1.0.52.3C
Junk Mail filter update 15.4.3502.0922
Windows Live Movie Maker 15.4.3502.0922
TOSHIBA HDD/SSD Alert 3.1.64.9
Windows Live Remote Service 15.4.5722.2
Toshiba App Place 1.0.6.3
Windows Live Mesh 15.4.3502.0922
Windows Live Language Selector 15.4.3538.0513
QuickTime 7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver 2.0.34.0
TOSHIBA Value Added Package 1.6.1.64
Microsoft_VC80_CRT_x86 8.0.50727.4053
Google Update Helper 1.3.21.111
TOSHIBA HDD Protection 2.2.2.15
7-Zip 9.20 (x64 edition) 9.20.00.0
TOSHIBA PC Health Monitor 1.7.9.64
Windows Live Mail 15.4.3502.0922
Adobe Help Manager 4.0.244
MSVCRT 15.4.2862.0708
Windows Live Remote Client 15.4.5722.2
Blackmagic ATEM Switchers 3.0.1.0
Microsoft_VC90_MFC_x86 1.00.0000
Windows Live Photo Common 15.4.3502.0922
Windows Live ID Sign-in Assistant 7.250.4232.0
Microsoft Visual C++ 2005 Redistributable 8.0.61001
Windows Live Messenger 15.4.3538.0513
Windows Live Mesh 15.4.3502.0922
Windows Live Writer 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 9.0.30729
TOSHIBA Hardware Setup 1.63.1.37C
Microsoft Silverlight 4.0.50401.0
PlayReady PC Runtime x86 1.3.0
Intel(R) WiDi 2.1.41.0
Windows Live MIME IFilter 15.4.3502.0922
TOSHIBA Flash Cards Support Utility 1.63.0.12C
TOSHIBA eco Utility 1.3.5.64
Windows Live UX Platform 15.4.3502.0922
TOSHIBA Wireless Display Monitor 1.0.1
Debugging Tools for Windows (x64) 6.12.2.633
Windows Live Remote Service Resources 15.4.5722.2
Windows Live Writer Resources 15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17 9.0.30729
Intel(R) PROSet/Wireless WiFi Software 14.01.1000
Windows Live Installer 15.4.3502.0922
TOSHIBA Disc Creator 2.1.0.11 for x64
PlayReady PC Runtime amd64 1.3.0
Windows Live SOXE 15.4.3502.0922
Java Auto Updater 2.0.4.1
TOSHIBA Bulletin Board 1.6.08.64
Crash details:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1041
Additional information about the problem:
BCCode: d1
BCP1: 0000000000000001
BCP2: 0000000000000002
BCP3: 0000000000000008
BCP4: 0000000000000001
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\090312-28516-01.dmp
C:\Users\xxx\AppData\Local\Temp\WER-62696-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
DMP file details
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03048670
Debug session time: Mon Sep 3 02:27:16.190 2012 (UTC + 9:00)
System Uptime: 0 days 0:06:50.096
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1, 2, 8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000001, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000001, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b2100
0000000000000001
CURRENT_IRQL: 2
FAULTING_IP:
+6130613031313361
00000000`00000001 ?? ???
PROCESS_NAME: System
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: fffff80000b9c740 -- (.trap 0xfffff80000b9c740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80000b9c801 rbx=0000000000000000 rcx=fffffa8004586618
rdx=fffff80000b9c8d8 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000001 rsp=fffff80000b9c8d0 rbp=0000892fc0ba4327
r8=fffff80000b9c8d0 r9=0000000000000000 r10=0000000004216094
r11=000000005e040600 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
00000000`00000001 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002e82769 to fffff80002e831c0
FAILED_INSTRUCTION_ADDRESS:
+6130613031313361
00000000`00000001 ?? ???
STACK_TEXT:
fffff800`00b9c5f8 fffff800`02e82769 : 00000000`0000000a 00000000`00000001 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff800`00b9c600 fffff800`02e813e0 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c740 00000000`00000001 : 00000000`00000000 00000000`5e040600 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8d0 00000000`00000000 : 00000000`5e040600 00000000`00000000 00000000`00000000 00000000`080e8118 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+260
fffff800`02e813e0 440f20c0 mov rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
Followup: MachineOwnerSatellite A215-S7422
We need to know the Stop code on the blue screen. If there is a file name mentioned, we want that too.
You can prevent the rapid disappearance of the blue screen during a normal boot by choosing this at the F8 Startup menu.
Disable automatic restart on system failure
-Jerry -
ADA 508 Compliance Workflow Overview (tab key for navigation / WebAim Toolbar)
Hi,
I've been assigned to update interactive training for a State agency..... with of course, an emphasis on ADA / 508 compliance.
So, before I pinpoint my two questions/scenarios, here is a basic, initial attempt at providing an overview of ADA compliance workflow in Captivate and beyond.
PS - useful Captivate forum urls are at the end of this post. I'm using Captivate v.6
ADA Compliance Workflow Overview:
1. All assets need an alt tag and conceivably a description > highlight the asset, like a pic, and click the Accessibility button under Properties.
2. Create slide notes for each slide > load slide, highlight no assets and click the Accessibility tab under Properties. Copy and paste your notes > for screen readers.
3. Need closed captioning for video/audio content > I use Camtasia for CC and will use the JW player for screen reader of video content.
4. Interactivity needs to be accessible via the tab and enter keys.
What else am I missing?
Question 1
My question targets how to get the enter key to initiate after a successful tab. To be clearer.... I hit tab and I can navigate through all the buttons in the correct order, but hitting enter provides no action. I am gettining the yellow highlights around buttons when I tab through. Everything works very well when using the mouse, but blind users don't use mice.
I did create my own animation buttons in Flash and imported them in as animations. I then placed a Click Box behind the button animation to engage the rollover action. Could this be causing problems? The prebuilt (and clunky looking) buttons on the quizzes do work (ie) tabbing to them and hitting enter provides effective navigation.
I'm opting not to use the playback control skin, only my Flash nav bar.
Question 2 (Scenario 2)
I have downloaded the WebAim Toolbar feature designed for FireFox, used to check ADA compliance issues.
I am getting this error message:
A frame does not have a title attribute or value. Okay... I bet I can fix this via the .html file or via the standard.js file??
and these warnings:
Alert: Javascript in head - A javascript element is present in the page head section.
Alert: Flash - A Flash object is present.
Does anyone know if these alerts are worth fixing?
Obviously Captivate is going to pump out, or rather publish... javascript elements, but is this bad in the page head section?
And..... of course a Flash object is present...Captivate produces Flash / Shockwave files.
I'll obviously ask the programmers at WebAim for guidance as well. As always any help would be appreciated and Tanks in advance.
http://forums.adobe.com/message/117985#117985
http://gneil.blogspot.com/2008/09/target-6-million-settlement-is-your.html
http://kb2.adobe.com/cps/403/kb403160.html
http://forums.adobe.com/message/3515968#3515968
Screen grabs are attached.
Thanks, Calif Dreamin'Hi,
Attached is my zipped project file. I did create my own buttons in Flash - this might be the problem. I have only been problem solving with navigation on the first four slides.
To clarify, hitting the Enter key does engage navigation, however I’m having difficulty controlling the navigation so that it goes to the correct location.
I’m using Captivate v.6 / publishing SCORM 1.2 / Using IE to deliver via the SyberWorks LMS.
Here is question 1:
Question 1
My question targets how to get the enter key to initiate after a successful tab. To be clearer.... I hit tab and I can navigate through all the buttons in the correct order, but hitting enter provides no action. I am getting the yellow highlights around buttons when I tab through. Everything works very well when using the mouse, but blind users don't use mice.
I did create my own animation buttons in Flash and imported them in as animations. I then placed a Click Box behind the button animation to engage the rollover action. Could this be causing problems? The prebuilt (and clunky looking) buttons on the quizzes do work (ie) tabbing to them and hitting enter provides effective navigation.
I'm opting not to use the playback control skin, only my Flash nav bar.
Thanks for reaching out!!
Thanks,
Bill Farrell (aka Calif Dreamin’) -
When I connect my external screen ( iiyama vision master pro 410 ) to my macbook via the mini dvi to vga connector the screen of the iiyama is blurred. ( not just the text, everything ) It is on it's native resolution, and if i hook up any other pc to it, it's fine.
If I use a mini dvi to dvi connector and hook the macbook up to a different monitor, the image is ok, still slightly blurred, but workable.
any ideas ??
tnx !
MauritsFirst, I would make sure your Iiyama's "tuning" is correct. Refer to the Iiyama's user guide for how to adjust the clock phase (tuning).
Second, understand that VGA has limitations. Apple may have put heavy filtering on the video outputs to help with EMI compliance. This will cause video to appear blurry. Of the GMA950 might not have great bandwidth. People have complained about the same thing with the Mac mini, which also uses the GMA950. -
iTunes says it needs to be restored to default to connect. When I restore it nothing changes. I get the same behavior. Below is my deivce log from the iPhone Config Utility. Hopefully someone can tell me if the phone is a wash.
==== Attached at 7/23/2012 11:56:40 PM ====
Jul 23 23:21:03 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:03 unknown configd[44] <Notice>: Captive: en0: Not probing 'can haz netz' (good signature)
Jul 23 23:21:03 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:04 unknown wifid[13] <Error>: WiFi:[364792864.449884]: Client itunesstored is background application
Jul 23 23:21:04 unknown ptpd[185] <Notice>: PTP interface has been activated at high speed.
Jul 23 23:21:06 unknown kernel[0] <Debug>: launchd[192] Builtin profile: syncdefaultsd (sandbox)
Jul 23 23:21:09 unknown configd[44] <Notice>: Captive: en0: Not probing 'can haz netz' (good signature)
Jul 23 23:21:09 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:09 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:21:09 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:21:09 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=0036ab00
Jul 23 23:21:09 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:21:09 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:21:09 unknown kernel[0] <Debug>: DEPCTL DEPINT DEPTSIZ DEPDMA
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51dd700c
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f97068
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4a03100c
Jul 23 23:21:09 unknown kernel[0] <Debug>: EP04 80088200 00000000 02008000 42011000
Jul 23 23:21:10 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:21:10 unknown UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 1
Jul 23 23:21:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jul 23 23:21:10 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:21:10 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:21:10 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:21:11 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received time 07/24/2012 03:21:13-0-.-0-0 -f-r-o-m -"-N-I-T-Z-"
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:21:13 from NTP because time is unchanged
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Want active time in 31.52hrs. Need active time in 114.85hrs.
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received network time zone "NITZ" with 364792873.00 -240 DST 1 in 310
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Searching in DST time zone map for offset -240 and MCC 310
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "NITZ"
Jul 23 23:21:13 unknown timed[194] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Jul 23 23:21:15 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:21:15 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:21:15 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00131c00
Jul 23 23:21:15 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:21:15 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:21:15 unknown kernel[0] <Debug>: DEPCTL DEPINT DEPTSIZ DEPDMA
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51dd700c
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f97068
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4a03100c
Jul 23 23:21:15 unknown kernel[0] <Debug>: EP04 80088200 00000000 02008000 42011000
Jul 23 23:21:16 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::setLinkQualityMetricGated: Setting link quality metric to 100
Jul 23 23:21:16 unknown timed[194] <Notice>: (Note ) CoreTime: Want active time in 31.52hrs. Need active time in 114.85hrs.
Jul 23 23:21:21 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:21:45 unknown profiled[183] <Notice>: (Note ) profiled: Idled.
Jul 23 23:21:45 unknown profiled[183] <Notice>: (Note ) profiled: Service stopping.
Jul 23 23:25:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 1
Jul 23 23:26:21 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:21 unknown lockdownd[26] <Notice>: 2ff90000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:26:21 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x1273b0 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x127460 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x1274a0 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x127ec0 [0x3f71b650]>{contents= "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x127ef0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x1274e0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x127510 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x127530 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x127ef0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x1275a0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x1274a0 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:26:21 unknown lockdownd[26] <Notice>: 2ff90000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:26:22 unknown atc[199] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:23 unknown wifid[13] <Error>: WiFi:[364793183.480799]: Client itunesstored is background application
Jul 23 23:26:24 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:26:45 unknown lockdownd[26] <Notice>: 2ff90000 _receive_message: walk away - non-SSL 1
Jul 23 23:35:09 unknown configd[44] <Notice>: network configuration changed.
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! prot::handleReadData: Dumping 27.010 buffer (8 bytes):
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! prot::handleReadData: frameStart = 0, address = 31
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: length 8
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: chunk 0 (8/0xd07b5804):
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! buff(3260)::__log: 0000 7D 01 EF A1 0D 0A 2B 58 }.....+X
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(eng)::fatalError: fatal error: kASMFatalErrorInvalidChannel (8): channel was 31
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(eng)::changeMuxStateGated: state change: Engaged -> Error
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::bsdIoctl: Fatal error code=kASMFatalErrorInvalidChannel(8)
Jul 23 23:35:09 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::validateAndGetMuxBsdInterface: Cannot perform Receive on Bypass when state is Error
Jul 23 23:35:09 unknown CommCenter[55] <Notice>: CSI state dump requested: AppleSerialMultiplexer Fatal Error: Code kASMFatalErrorInvalidChannel (8): channel was 31: snapshot: RESET_DET: Dunno, SPCLKCON 0x1, SPCON 0xd405a, SPSTA 0x160410, SPCNT 0x128, SPTDCNT 0x127 - Protocol: MRDY Low, SRDY High(Select Exception)
Jul 23 23:35:10 unknown kernel[0] <Debug>: AppleSerialMultiplexer: !! mux-ad(err)::validateAndGetMuxBsdInterface: Cannot perform Receive on Bypass when state is Error
Jul 23 23:35:10 unknown CommCenter[55] <Error>: kDataAttachStatusNotification sent, wasAttached: 1 isAttached: 0
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 lookup_baseband_info_old: The SIM status has changed
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 load_activation_records: Could not extract ICCID from record
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 load_activation_records: This is a wildcard record
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No unlock record. Looking for a care flag.
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No care flag. Looking for a record that matches the SIM.
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: Looking up the record for ICCID 89014104254188303245
Jul 23 23:35:10 unknown lockdownd[26] <Notice>: 3ec2cd98 copy_activation_record: No record for the SIM. Looking for wildcard.
Jul 23 23:35:10 unknown SpringBoard[50] <Error>: mms: ***** isMmsConfigured = 1
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Received source unavailable from "NITZ"
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:35:11 from NTP because time is unchanged
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from NITZ
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Want active time in 31.28hrs. Need active time in 114.62hrs.
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: This device is a phone. It supports factory activation.
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The original activation state is WildcardActivated
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: SIM status: kCTSIMSupportSIMStatusNotReady
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: No ICCID in the activation record
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The record contains a wildcard ticket
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 deliver_baseband_ticket: SIM is not in operator locked state. Ignoring activation ticket
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 3ec2cd98 determine_activation_state_old: The activation state has not changed.
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 00299000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:35:11 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x11b710 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x11b7c0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x145d20 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x11b6e0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x1393a0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x11b470 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x1329f0 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x11b4a0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x1393a0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x11b4d0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x145d20 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:35:11 unknown lockdownd[26] <Notice>: 00299000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Received timezone "America/New_York" from "Location"
Jul 23 23:35:11 unknown timed[205] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from Location
Jul 23 23:35:11 unknown kernel[0] <Debug>: AppleBaseband::resetDetectInterrupt with 1
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: Baseband reset:
Jul 23 23:35:13 unknown CommCenter[55] <Error>: _ReInitThrottleTimer(): Clearing throttle timer on context ID [0xffffffff] at 364793713.503971
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: START LOCATION UPDATE
Jul 23 23:35:13 unknown CommCenter[55] <Notice>: STOP LOCATION UPDATE
Jul 23 23:35:14 unknown timed[205] <Notice>: (Note ) CoreTime: Want active time in 31.28hrs. Need active time in 114.62hrs.
Jul 23 23:45:20 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 23 23:45:20 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Jul 23 23:45:20 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jul 23 23:45:21 unknown CommCenter[55] <Notice>: CSI state dump requested: No response from modem
Jul 23 23:45:21 unknown SpringBoard[50] <Notice>: MultitouchHID: device bootloaded
Jul 23 23:45:21 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->0
Jul 23 23:45:21 unknown kernel[0] <Debug>: set_crc_notification_state 0
Jul 23 23:45:43 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Jul 23 23:45:43 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:46:43 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:46:43 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:46:43 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:46:43 unknown profiled[212] <Notice>: (Note ) profiled: Service starting...
Jul 23 23:46:43 unknown profiled[212] <Notice>: (Note ) profiled: Locking device
Jul 23 23:46:44 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:46:44 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(nr)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Jul 23 23:46:54 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:47:24 unknown timed[213] <Notice>: (Note ) CoreTime: Want active time in 31.08hrs. Need active time in 114.41hrs.
Jul 23 23:47:34 unknown timed[213] <Notice>: (Note ) CoreTime: Not setting system time to 07/24/2012 03:47:34 from NTP because time is unchanged
Jul 23 23:47:34 unknown timed[213] <Notice>: (Note ) CoreTime: Not setting time zone to America/New_York from Location
Jul 23 23:47:43 unknown profiled[212] <Notice>: (Note ) profiled: Idled.
Jul 23 23:47:43 unknown profiled[212] <Notice>: (Note ) profiled: Service stopping.
Jul 23 23:53:50unknown notification_proxy[198] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:53:50 unknown notification_proxy[198] <Error>: Could not receive message
Jul 23 23:54:38 unknown iapd[38] <Warning>: ERROR - /SourceCache/iapd/iapd-813.55.20/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 271 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jul 23 23:54:38 unknown notification_proxy[200] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:54:38 unknown notification_proxy[200] <Error>: Could not receive message
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_on even though we are not in it, doing nothing
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Jul 23 23:54:38 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Jul 23 23:54:38 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_on even though we are not in it, doing nothing
Jul 23 23:54:38 unknown ptpd[185] <Notice>: PTP interface has been deactivated.
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Jul 23 23:54:38 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 0
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: device bootloaded
Jul 23 23:54:38 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->0
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:39 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
Jul 23 23:54:39 unknown kernel[0] <Debug>: USB mux: 276 reads / 0 errors, 464 writes / 0 errors
Jul 23 23:54:39 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
Jul 23 23:54:39 unknown kernel[0] <Debug>: set_crc_notification_state 0
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:54:39 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:39 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:40 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:44 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Jul 23 23:54:44 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model Number: 4
Jul 23 23:54:58 unknown iapd[38] <Warning>: MFG:
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model:
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:54:58 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model Number: 4
Jul 23 23:54:58 unknown iapd[38] <Warning>: MFG:
Jul 23 23:54:58 unknown iapd[38] <Warning>: Model:
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 0
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType Detached
Jul 23 23:54:59 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBCableDisconnect
Jul 23 23:54:59 unknown iapd[38] <Warning>: ERROR - /SourceCache/iapd/iapd-813.55.20/IAPPortManager.mm:-[IAPPortManager availableCurrentFromAccInMa] - 271 IOAccessoryManagerGetUSBCurrentLimitBase failed 0xe00002d9
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_charging even though we are not in it, doing nothing
Jul 23 23:54:59 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_asleep even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing
Jul 23 23:55:05 unknown aggregated[49] <Warning>: PLAggregateState Error: Leaving state pluggedin_screen_off even though we are not in it, doing nothing
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableDetect 1
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleD1815PMUPowerSource: AppleUSBCableType USBHost
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:55:06 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
Jul 23 23:55:06 unknown UserEventAgent[12] <Warning>: DEBUG: Changing powered state: 1
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:07 unknown lockdownd[26] <Notice>: 2ff90000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt copyMobileEquipmentIdentifier: No MEID in CT mobile equipment info dictionary - <CFBasicHash 0x11c730 [0x3f71b650]>{type = mutable dict, count = 5,
entries =>
1 : <CFString 0x11b890 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentSubscriberId"} = <CFString 0x132890 [0x3f71b650]>{contents = "310410418830324"}
2 : <CFString 0x11c700 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoCurrentMobileId"} = <CFString 0x139db0 [0x3f71b650]>{contents = "012417009917339"}
4 : <CFString 0x11c760 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoICCID"} = <CFString 0x11a9b0 [0x3f71b650]>{contents = "89014104254188303245"}
11 : <CFString 0x11b8d0 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMEI"} = <CFString 0x139db0 [0x3f71b650]>{contents = "012417009917339"}
12 : <CFString 0x134970 [0x3f71b650]>{contents = "kCTMobileEquipmentInfoIMSI"} = <CFString 0x132890 [0x3f71b650]>{contents = "310410418830324"}
Jul 23 23:55:07 unknown lockdownd[26] <Notice>: 2ff90000 copy_meid: MobileGestalt failed to provide an MEID but returned no error (?)
Jul 23 23:55:07 unknown ptpd[218] <Notice>: PTP interface has been activated at high speed.
Jul 23 23:55:07 unknown kernel[0] <Debug>: launchd[218] Builtin profile: ptpd (sandbox)
Jul 23 23:55:07 unknown lockdownd[26] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:08 unknown atc[224] <Error>: libMobileGestalt computeUniqueDeviceID: total time for bb to return imei: 0
Jul 23 23:55:08 unknown wifid[13] <Error>: WiFi:[364794908.966216]: Client itunesstored is background application
Jul 23 23:55:13 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:55:13 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:55:13 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00191900
Jul 23 23:55:13 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:55:13 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:55:13 unknown kernel[0] <Debug>: DEPCTL DEPINT DEPTSIZ DEPDMA
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51e5700c
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f78238
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4b4d900c
Jul 23 23:55:13 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42009000
Jul 23 23:55:18 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::endpointIOTimerExpired : IO stuck for endpoint 81, killing it
Jul 23 23:55:18 unknown kernel[0] <Debug>: GINTSTS=04008028 GINTMSK=a00c3800 GNPTXSTS=00080010 DAINT=00000000
Jul 23 23:55:18 unknown kernel[0] <Debug>: DAINTMSK=0015002b DCFG=00000010 DCTL=00000000 DSTS=00357b00
Jul 23 23:55:18 unknown kernel[0] <Debug>: GRXFSIZ=0000021b GNPTXFSIZ=0010021b DPTXSIZ(1)=0040022b
Jul 23 23:55:18 unknown kernel[0] <Debug>: GAHBCFG=0000002b, GUSBCFG=00002c08, GRSTCTL=80000000
Jul 23 23:55:18 unknown kernel[0] <Debug>: DEPCTL DEPINT DEPTSIZ DEPDMA
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP80 00008000 00000080 00000000 419c5004
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP00 80028000 00000000 20080040 419c4000
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP81 80888200 00000000 20080000 51e5700c
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP83 004e8040 00002090 00000000 7617e65e
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP85 00c98200 00002010 20000000 41f78238
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP02 000a8200 00002010 00380ff4 4b4d900c
Jul 23 23:55:18 unknown kernel[0] <Debug>: EP04 80098200 00000000 02008000 42009000
Jul 23 23:55:28 unknown notification_proxy[223] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:55:28 unknown notification_proxy[223] <Error>: Could not receive message
Jul 23 23:55:36 unknown notification_proxy[222] <Error>: Could not receive size of message: 0 Invalid argument
Jul 23 23:55:36 unknown notification_proxy[222] <Error>: Could not receive message
Jul 23 23:55:52 unknown lockdownd[26] <Notice>: 015da000 copy_phonenumber: CTSettingCopyMyPhoneNumber() returned NULL
Jul 23 23:55:52 unknown mc_mobile_tunnel[233] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:55:52 unknown mc_mobile_tunnel[233] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:55:52 unknown mc_mobile_tunnel[234] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:55:52 unknown mc_mobile_tunnel[234] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:55:52 unknown lockdownd[26] <Notice>: 015da000 set_response_error: handle_start_session SessionActive
Jul 23 23:56:06 unknown SpringBoard[50] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=0
Jul 23 23:56:06 unknown SpringBoard[50] <Notice>: MultitouchHID: detection mode: 0->255
Jul 23 23:56:06 unknown kernel[0] <Debug>: ALS: [AppleCT700] setPropertiesGated: requested ReportInterval=0 turn OFF sensor
Jul 23 23:56:06 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 1
Jul 23 23:56:06 unknown profiled[237] <Notice>: (Note ) profiled: Service starting...
Jul 23 23:56:06 unknown profiled[237] <Notice>: (Note ) profiled: Locking device
Jul 23 23:56:07 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock change
Jul 23 23:56:07 unknown mc_mobile_tunnel[239] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Jul 23 23:56:07 unknown mc_mobile_tunnel[239] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Jul 23 23:56:16 unknown kernel[0] <Debug>: AppleSerialMultiplexer: mux-ad(nr)::dormancySetIntervalGated: Setting dormancy interval to 2500 ms with mask 0x1700
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:timer fired
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(0)
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:Removing timer
Jul 23 23:56:17 unknown kernel[0] <Debug>: AppleKeyStore:Sending lock changeObviously your phone was damaged by the fall. Take it in for evaluation, servicing and/or replacement at an Apple store or authorized service provider.
Since it is out of warranty you will, most likely, have to pay.
Maybe you are looking for
-
How about some more Samsung products in the auctions ? I really don't want to bid on those crappy ipads. How about a better mix of product lines or at least some of your "new" digital coupons geared towards Samsung products????
-
Weblogic portal server as web server
How can i use weblogic portal server as my web server and another weblogic domain as my application server and link between the two? I mean the frontend of the application on the portal server which interacts with the backend which is on the applicat
-
Workflow giving error at execution
Hi all, I am referring Ginger Gatling blog to create simple workflow https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bbdb3c-d640-2a10-d3b2-e4d9b90536a6 After activating my workflow (workflow is to display material asking user ac
-
Trigger Event Structure Case on Startup
Hello, Within my project, I am controlling a linear actuator via Modbus TCP, with an event structure within a loop. I control its velocity, acceleration ... etc. It works beautifully, but I must change the values of the mentioned parameters to trig
-
Speaker and headphones stop working on mac book pro?
Why does my speaker and headphones randomly stop working on my mac book pro? It wont work again until I restart my computer.