ATE Engineer with LabVIEW Position Open

Moog Aircraft Group Salt Lake Operations has several immediate openings for Test Engineers with the following experience:
6+ years ATE experience, including real-time technologies, as applied to complex component simulation and control solutions.
Working knowledge of National Instruments LabVIEW™.
BSEE or BSCS required.
Previous exp with avionic systems and the various interfaceBSEE, BSCS s between aircraft electronics and actuation hardware (i.e. electro-hydraulic and electro-mechanical actuation systems).
Possess a working knowledge of industrial and avionics bus architectures (e.g. ARINC-429, MIL-1553, RS-422/485, RS-232, USB, IEEE-1394, etc.). Work skillfully with various sensors and transducer signal conditioning (e.g. LVDTs, RVDTs, resolvers, pressure sensors, potentiometers, etc.).
If you are interested in this position, please send resume to [email protected]

Attachments:
CV_Giridhar Rajan.doc ‏50 KB

Similar Messages

Electrical Design Engineer with LabVIEW

Electrical Design Engineer with LabVIEW
q       Skilled with electronic circuit and electrical system design:
o         analog circuitry - detailed circuit analysis and design
o         microprocessors / microcontrollers
o         high performance data conversion circuits ( A/D and D/A converters )
o         digital circuitry - signal integrity, data communication, logic noise
o         power and support circuitry
o         signal conditioning and signal integrity (analog and digital)
o         RF and high-speed designs
o         full design implementation - concept to detailed circuit design to test / debug to production
q       Experience with RF and RF transceiver design.
q       Excellent documentation, specification, test planning, and test report writing skills a must. Must be able to develop and write detailed test requirements, test plans, technical specifications, design descriptions, and project reports.
q       LabVIEW™ and PC-based data acquisition experience. NI Certified Developer or ability to obtain this certification in reasonable period of time.
q       Data acquisition design experience.
q       Knowledge of PCB manufacturing.
Education / Training and Background :
BSEE / MSEE degree in Electrical Engineering
Attachments:
Invisar EE Design Engineer April 2006.pdf ‏50 KB
Invisar Project Engineer 5_2006.pdf ‏30 KB

I AM WORKING IN LABVIEW FROM 6+ MONTHS WIHT PXI.
I AM VERY ENTHUSIATIC TO WORK IN LABVIEW
i am from INDIA
MY EMAIL ID IS [email protected]

Smart Software Engineer with LabVIEW experience (and acoustics a plus) needed in Boston, MA

We've are looking for a staff software engineer to join our company in Boston, MA (near downtown). We have a 3000+ vi application that has been in continuous development by multiple software engineers (currently 4 engineers + 1 intern) for 15 years. Every year we release a new version of the software with significant new features. An engineer with our company needs to be more than just a LabVIEW hacker. We need a software engineering that can go into our large application, modify it, sometimes in very fundamental ways, without breaking existing functionality, and have an eye for how their changes impact the maintainability, scalability, reliability, and readability of our code.
Candidates will likely be LabVIEW Architects or have equivalent experience if they don't have formal certification. We lean towards candidates who have Masters Degrees in such fields as Electrical Engineering, Mechanical Engineering, and Computer Science. Interviews will be conducted over phone, web, and in person by a LabVIEW Architect and will need to be able to discuss topics such as the following:
- coupling and cohesion in software design, how this relates to design paterns such as action engines
- software lifecycle models- state machines, parallel loop architectures, race conditions, data structures, type definitions, Xcontrols,
- Object Oriented design
- importance of documentation, importance and use of source code control
- pseudo code and its usefulness as a design tool, some exercises will require users to read and write pseudo code to solve classic computer science problems
- tradeoffs of various file formats in terms of flexibility for future software changes
- FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
Formal job ad is below:
To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Software Programmer.
Programmer for Audio Test and Measurement software - Boston
Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 15 years and our continued growth has created an opportunity for a software engineer to join our programming team. This is an exciting opportunity to work on an industry leading electro-acoustic test and measurement system used by numerous Fortune 500 companies in the field of loudspeaker, microphone, headphone, telecommunications and audio electronic manufacturing.
This position reports to the Software Manager. Duties include, but are not limited to:
Programming in LabVIEW
Designing and coding new Sound Measurement and Analysis software
Improving, reviewing and de-bugging existing code
Preparing internal and user technical documentation
Testing code
Interfacing with management, sales teams and customers to define tasks
Required skills / education
Bachelor’s degree (Masters preferred) in electrical engineering, mechanical engineering, computer science, physics, or similar subject
Strong background (4+ years) in programming with 1+ years in LabVIEW.
A methodical approach to coding, testing and documentation
The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
Experience in acoustic engineering is a plus. Relevant topics include FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
About Listen
Listen has been in business for over 15 years and our suite of PC & sound card audio test & measurement products is the accepted standard in many blue-chip companies worldwide. We offer the spirit and flexibility of a small company, combined with stability and an excellent externally managed benefits package which includes competitive salary, healthcare, paid vacation, retirement plan and more.
Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.

we're interviewing candidates, but, this position is still available

Electrical Engineer with LabVIEW Experience, Windsor, CO - Start Immediately

National Analytics, Inc. is looking for a talented and motivated Electrical Engineer with a proven electronic hardware design and development background to complement our team of system integration experts. Experience with RF and DC power supplies or high power, high voltage inverters is highly desirable.
Located in beautiful Northern Colorado, National Analytics has become a mainstay in remote monitoring & control, systems integration and engineering solutions. Our services include software engineering, hardware engineering, mechanical and electrical design, contract manufacturing & test, project management and training. Some of our recent customer markets include:
* Government
* Aerospace
* Nuclear, Fossil & Wind Power
* Environmental Remote Monitoring
* Defense
* Medical
* Oil & Gas
* Manufacturing
Eligible candidates must be hard working, eager to learn, and able to adjust to rapidly changing project demands. We provide a fast-paced, fun work environment that promotes personal growth with challenging opportunities.
Requirements:
1. BSEE
2. Proven electronic hardware design and development experience
3. 3 years minimum LabVIEW programming experience required.
4. Experience in analog and digital circuit design, schematic capture, board level PCB layout, design, and validation
5. Embedded microcontroller programming
6. FPGA programming
7. Experience in design and development of automated test equipment for products with analog, digital, and embedded software content
8. Ability to operate a variety of test equipment (oscilloscope, function generator, spectrum analyzer, etc.)
9. Altium or similar electronics design package
10. Demonstrated proficiency with LabVIEW
11. Ability to solve complex technical problems independently
12. Good verbal and written communication skills
13. Ability to work in fast paced, high-pressure environment
Please include professional references and salary expectations.
Due to government contracting requirements, only US Citizens will be considered.
Learn more about us at http://www.nationalanalytics.com
No phone calls please.

Hi Dan,
I am the manager for the Customer Education department for NI Canada. We are looking for Engineers with extensive LabVIEW/LabWindows experienced to become certified as Professional Instructors of our courses. We are currently looking for someone experienced developing Real-Time applications, TestStand and CVI.
We do not offer a full-time position, rather are Contract work.
If you are interested and have the experience, feel free to contact me for further details.
Thanks,
Berenice Tostado
National Instruments Canada
Customer Education Manager

Electrical Engineer with LabVIEW Experience - Needed Immediately - Windsor, CO

National Analytics, Inc. is looking for a talented and motivated Electrical Engineer with a proven electronic hardware design and development background to complement our team of system integration experts. Experience with RF and DC power supplies or high power, high voltage inverters is highly desirable.
Located in beautiful Northern Colorado, National Analytics has become a mainstay in remote monitoring & control, systems integration and engineering solutions. Our services include software engineering, hardware engineering, mechanical and electrical design, contract manufacturing & test, project management and training. Some of our recent customer markets include:
* Government
* Aerospace
* Nuclear, Fossil & Wind Power
* Environmental Remote Monitoring
* Defense
* Medical
* Oil & Gas
* Manufacturing
Eligible candidates must be hard working, eager to learn, and able to adjust to rapidly changing project demands. We provide a fast-paced, fun work environment that promotes personal growth with challenging opportunities.
Requirements:
BSEE
Proven electronic hardware design and development experience
Experience in analog and digital circuit design, schematic capture, board level PCB layout, design, and validation
Embedded microcontroller programming
FPGA programming
Experience in design and development of automated test equipment for products with analog, digital, and embedded software content
Ability to operate a variety of test equipment (oscilloscope, function generator, spectrum analyzer, etc.)
Altium or similar electronics design package
Demonstrated proficiency with LabVIEW
Ability to solve complex technical problems independently
Good verbal and written communication skills
Ability to work in fast paced, high-pressure environment
Please submit your resume via email to [email protected] . Please include professional references and salary expectations.
Due to government contracting requirements, only US Citizens will be considered.
Learn more about us at http://www.nationalanalytics.com
No phone calls please.

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

Full Time Software Engineer with Labview Experience Wanted - NJ

Pentek, Inc. located in Upper Saddle River, New Jersey is an established, high-tech manufacturer of Software Radio and Signal Processing products as well as High-Speed Recording Systems. We are seeking a multifaceted and resourceful Applications Engineer to join our Recording Systems Development Team. As part of this team, you will be responsible for software development, test and support of Pentek's high-speed PC-based recording systems.
Qualifications
Labview development experience
C programming experience a plus
JAVA programming experience a plus
Good verbal and written communication skills
This is a full-time position with 401k, excellent health insurance benefits, vacation/sick/personal days, competitive salary, and a great working environment!
If Pentek sounds like the place for you, please fax, mail or email your resume to:
Pentek, Inc.
Attn: Human Resources Manager
One Park Way 2nd Floor
Upper Saddle River, NJ 07458
Phone: (201) 818-5900
Fax: (201) 818-5692
Email: [email protected]
http://www.pentek.com/

We are looking for someone that can work within our facility, which is located in the U.S.

LabVIEW /ATE Engineer

I have an opening for
an ATE Engineer with Labview. If you
are interested please forward your resume to me at [email protected] . Thank you for your time.
CLA 2014
CCVID 2014

Hi ,
Punit
I am Brijesh patel.
I am CLAD, I am Working With Nutron Systems(Ahmedabad).
We have developed custumise SCADA application using Labview (We didnt Used DSC module) But we developed Such kind
of Scada. Which can aquire data using serial , TCP/IP protocol. As back hand we used Exel as well as sql.
Brijesh Patel
Brijesh Patel
Application Engineer,
Nutron Systems,
Ahmedabad

Labview imaging opening. Milpitas, ca

http://www.fairchildimaging.com/main/careers.htm
Fairchild imaging is a manufacturer of CCD sensors and cameras.
Opening for test engineer with labview experience in
imaging. Click on above link for more info. Please
read posting before applying.
Milpitas, ca
(Please do not respond to this post.)

I am Sreekanth Komatineni from Virginia. Let me know if you still have the requirement for this position.
Here is my Skillset.
Skills: LabVIEW, VB, VC++, C/C++, and Java with good customer interaction.
Experience Summary:
Over 7 years of experience in design and development of customized PC based Embedded Applications, Industrial automations, ARM7TDMI Processor, Module Specific Driver Routines, Bring up of Modules on SOC/FPGA, Silicon Validation Test Cases design and Automation, Power Measurements, Audio Characterization, HDMI Characterization for Compliance Testing, PLL Jitter Measurements, LPC2104, ATMEL and PIC Micro Controller Programming, Programming Hand held terminals, Motion Controller Software’s, Data acquisition and Control Systems using LABVIEW 7.1/8.0/8.2/8.5 and NI DAQ Cards in the defense, manufacturing and telecommunication industries.
Experience with PMD USB Interface cards, GPIB Interface, VISA and Serial I/O Interface, Code Interface Nodes, Call Library Function nodes to interface with third party and custom Dlls, Multi-channel Data acquisition, Software Triggering, Analysis of acquired data with mathematical algorithms, Controlling and Monitoring applications, MODBUS and ASCII, I2C, UART communication programming on PC side as well as on-chip programming.

2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK

2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0      Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0      Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦     Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦     Developing intuitive GUIs.
◦     Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦     Providing timely, accurate and effective solutions to technical problems.
◦     Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦     Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦     Delivering professional and high quality, customer education courses.
◦     Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦     Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦     Working with the business development team to develop proof of concepts for customers.
◦     Travel 50% of the time.
3.0      Qualifications & Requirements:
◦     Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦     Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦     Understanding of object oriented principles.
◦     Ability to pass CLA exam within the year.
◦     Knowledge and experience in instrumentation & control, and industrial automation is required.
◦     Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦     Practical electrical debug experience.
◦     Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦     Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦     Must be able to handle multiple tasks and enjoy working with people.
◦     Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦     Excellent written, oral and presentation skills are key.
◦     Ability to deal effectively with customers to make them successful is essential.
◦     Ability to get along with others and function as a team player as well as work effectively alone.
◦     A proactive/can do attitude is vital and a happy view on life.
◦     Legal right to live and work in the UK. Sponsorship is not available.
◦     Must hold a full clean and valid UK driving license.
4.0      Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0      Reporting:
Systems Engineers will report to the Technical Director.
6.0      Salary:
Competitive salary based on level of experience.
7.0      Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.

Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx ‏18 KB

Open and close multisim contact with LabVIEW

Can I open and close multisim contact with labview and read the receptor estatus (p.e. lamp)?
Thanks.
Attachments:
Dibujo.JPG ‏13 KB

Hi Guddan,
I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
If this needs to be a synchronous call, then you will need to optimize the query to its best.
Regards,
Chen

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

How do I get to open a access's form with LabView?

I know as to send data to access´s table. Now,I would like to open a access´s form with LabView using activeX or other tools.
I would like to receive, if possible, a v.i. as example.
Thank you ...

This is a resource which should help you:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/f763aa1d7cd3c83d862568e8007c51cd?OpenDocument

Can't open the driver written by LabView5 with LabView 8.6

http://www.oinst-software.com/OIRI/docs/LV5drv/lv5drv.htm
I would like to use these drivers for oxford instruments with LabView 8.6. (I have the latest version of LabView, only.) But these drivers are written by LabView 5. So, I cannot open the drivers with the latest version. When opening, the alert occurs "VI version is too early to convert the current LabView version." In this case, is it no way to open these drivers. Does anyone help to convert these drivers for use with the latest version ?

Dear Dennis Knutson,
Thank you for your response.
I need to use immediately the attached two drivers at least.
Magnet Power Supply - IPS/PS
Level Meter - ILM
Is it posible to convert them for ver.8.6 ?
Attachments:
ps.zip ‏2640 KB
ilm.zip ‏2118 KB

Close a notepad window in labview after opening it with system exec

Is there a way to close a notepad window within Labview after opening the window using the System Exec function?
Also can Labview send characters to Notepad so they show up in its window?

You can send a quit message to another window by using one of the VIs in a collection of windows interaction VIs called winutil32 (or something similar), but you will have to know the window name. Try searching for it on this site.
You could probably also use the windows PostMessage function to send characters to another window, but that would require learning how to work with DLLs in LV, reading up on the function at the MSDN site and implementing it. Another, more simple but less secure, way is to use the windows Keybd_Event function to simulate keyboard clicks. If the notepad window has the focus, it will receive those clicks. Try searching this site or google for things like "Keybd_Event LabVIEW" or "simulate keyboard".
Try to take over the world!

Opening a labview 8.5 file with labview 8.21

Hello,
I was working on a project at home with labview 8.21, I nearly finished this project but I addes some stuff at school where they have labview 8.5.
Today I wanted to open the labview file on my computer, but It gave an error:
labview load error 9: Vi version 8.5 is newer then labVIEW version 8.2.1.
Is there any way I can open the file on my computer?
Or can I save the file at school als a 8.2.1 file?
thnx in advance,
Seppe

Hi Seppe,
just save it in school using "Save to previous" from the file menu...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

ATE Engineer with LabVIEW Position Open

Similar Messages

Maybe you are looking for