ATG Server Port # and Client Port #?

Can you confirm that the server port # for ATG is 9010 and is there a Client Port #?
TY!
RC

I have been tasked with finding the following information ahead of a server cutover due to company merger:
Application Name | Server Name | IP Address | Server Port # | Client Port #
ATG

Similar Messages

Can i use same Server for server side and client??

Hi,
i m developing webservices in java and using two different server for server side and client.
e.g. i m using one tomcat server on a machine to run webservice and again using one more tomcat server on client side at different machine.
and hence it need two tomcat server.
But i want only one server to run webservice and client.
So please help me out...
Thanks

Hi,
It is always recommended to maintain different servers
REgards,
Ravi.

Server Name and Client Name

Hi Experts,
Need a Function Module which can give me the current Server Name and Client name .
Please help me out.
Thanks
Chandan

Hi,
Check out :
1. "FIND_DB_APPLICATION_SERVER" gives the server name via the export parameter "SERVERNAME" .
2. "TH_GET_ACTIVE_SERVER" gives the server name via the export parameter "SERVER" .
3. "RFC_GET_LOCAL_SERVERS" will give a list containing some info about servers, then you can use the FM "TH_USER_INFO" to get user's host address from the exporting parameter "HOSTADDR". Then you can look-up the list you retrieved by the first FM where the first four characters at the field "HOSTADR" is the same with the user's. The server name is contained at the field "NAME" of the same row.
4. sy-sysid might also be usefull
5. Try this too:
CALL 'C_SAPGPARAM'
ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD ev_server_name.
where ev_server_name is function module export parameter of type BTCTGTSRVR-SRVNAME.
Hope it helps
Best Regards
Sumana

Cannot install Crystal Reports Server 2008 and Client Tools on same machine

I am having trouble setting up Crystal Reports Server 2008 with Client Tools on a new Windows 2003 SP 2 machine. The Server 2008 package installs OK (built-in MySQL server, built-in Tomcat 5.5 server). Reports run okay. But my customer wants to run reports that use Salesforce as a data source, so I tried to install Crystal Reports Server 2008 Client Tools (needed for Salesforce support, apparently). I receive this error:
'Business Objects product detected: cannot continue with install'. Installation of Client Tools immediately terminates.
Oddly enough, when I uninstalled Server 2008, the Client Tools installed successfully. Then I tried installing Server 2008, and I got the same error message as with Server 2008. What the heck?
Any ideas on how I can get Server 2008 and Server 2008 Client Tools to live in harmony on the same machine? We were able to do this with a (otherwise overloaded) Win2K3 server before.
Thank you in advance for any help.

Typically the client tools are installed with enterprise by default. If not then you would want to use add/remove in control panel and select them. The installer thinks you are trying to install enterprise on top of itself and thus the error.
Regards,
Tim

Server 8i and client 9.2 : Caractere problems

Dear all,
We use a software (server and client) and this software is running under Oracle 8i on the server side.
For some reasons, several PC-Client migrated to 9.2 client. But when we launch the Software Client, some fields appeared with Kanji Font, Square and Pipe.
SELECT *
FROM v$nls_parameters
WHERE parameter LIKE '%CHARACTERSET%';
---> NLS_CHARACTERSET UTF8
---> NLS_NCHAR_CHARACTERSET UTF8
The common configuration of the NLS_LANG is AMERICAN_AMERICA.UTF8. This configuration works with Oracle 8i clients.
Well, i'm looking for a solution about this problem.
I have to change something in the server ?
I have to edit some registry keys in Clients ?
Thanks for all,
VLE

Hi,
I have read the followed 2 documents :
"setting Up a Globalization Support Environment"
"Supporting Multilingual Databases With Unicode"
I see the the environment problem and I think that we're in a good way.
But, if I understand well, ma DATABASE is under UTF8, so I used in the NLS_LANG : AMERICAN_AMERICA.UTF8 (for client 8i) and the same for client 9.2. The second one don't work as i told you before.
I have read in the document that oracle 9i use Unicode 3.1, but not oracle 8i. But if I change the NLS_LANG in Oracle 9.2 Client, this client will already use Unicode 3.1 ?
Maybe I wrong.
For me, this is the first way, In a second step maybe this problem is due to the ODBC Oracle 9.2 ?

Client can not connect to Server installed window server 2008 and using 8.8

HI all!
I have a problem when Client log in to server that installed window server 2008.It can not connect to this server even when restart and key in IP or Server name,...
I try disable Firewall of window 2008 in server machine and client can connect to server. But when i disable firewall, it's mean i can not use Remote desktop or terminal service..
Now, how i can do in order to solve this problem.
Thanks!

Hi,
Take a look at the admin guide (Page 75, 119, 159):
[http://service.sap.com/~sapidb/011000358700000150922010E.zip]
If you installed a firewall on the license service computer, make sure that the firewall is not set to port 30000; otherwise, the license service cannot work.
If you are using Port X, make sure that you open Port X and Port (X+1) in the firewall. For example, if you are using port 10000, make sure to also open port 10001.
The default communication port is 1143.
The default port of the SAP Business One license server is 30000 for license communication and 30001 for the license naming service

[jsr82] can a j2me app be a Bluetooth server and client role in parallel?

I want to make my j2me app register a special service channel and listen to it, meanwhile, I also want to start a client to connect to other handset which has the same services. In Bluetooth protocol side, this is obviously OK, but in J2me is this design possible? some people said that in jsr82, the Bluetooth device is exclusive for J2me app, app cannot be both server role and client role at the same time. Can anybody give me a definite answer?

No this design is not possible with JSR 82. Because when the device acts as a server it can't be used as a client as whenever you will run the client code the server mode will disappear.
But what maximum you can do is when you need the client to run close the server and switch into the client mode but I think you don't need this solution.
Shan!!!

Contribute CS3 CPS server and clients

Let's say CS3 and publishing services (one in the same)
reside in server A and client's web site resides in Server B, but
they also have Contribute on thier client machine. Could I set up
the CPS in server A (via ldap) and set permissions for the client
even though their web site is in server B? If I'm not clear, let me
know and I'll try to explain with more real examples. Thank
you.

I guess I didn't see anything from Macromedia that tells me
that CPS works with the new version. I'm not looking for new
features. I just want to make sure there aren't any
incompatibilities, outstanding bugs.

Connecting to DirectAccess server from a client behind proxy with authentication

Hi,
All our DA clients are working fine except those that are working from a client company where a proxy with authentication is used.
Our DA server is running Windows server 2012 and clients are running Windows 7.
I have found similar posts, where it states it is a known issue and it is fixed by a new feature in Windows 2012, however i cannot find more info:
http://technet.microsoft.com/en-us/library/hh831416.aspx
IP-HTTPS runs in a system context rather than a user context. This context can cause connection issues. For example, if a DirectAccess
client computer is located in the network of a partner company that uses a proxy for Internet access, and WPAD auto detection is not used, the user must manually configure proxy settings in order to access the Internet. These settings are configured in Internet
Explorer on a per user basis, and cannot be retrieved in an intuitive way on behalf of IP-HTTPS. In addition, if the proxy requires authentication, the client provides credentials for Internet access, but IP-HTTPS will not provide the credentials required
to authenticate to DirectAccess. In Windows Server 2012, a new feature solves these issues. Specifically, the user can configure IP-HTTPS to work when behind a proxy that is not configured using WPAD and IP-HTTPS will request and provide the proxy credentials
needed to IP-HTTPS request authenticated, and relay it to the DirectAccess server.

Hello,
As far as I know it's a feature of Windows 2012 URA with a Windows 8 client.
Unfortunatelly you will have trouble with proxy authentication with Windows 7 client I think
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/

Server Host and Port for HTTP Client Too

Hi All,
I'm using the HTTP Client tool to connect to XI. How can i find out the ServerHost, ServerPort and Client values.
Thanks,
Sandeep

Hi Michal, Thanks for the response,
But when i use these values and connect. I get the Response - Resource not found . See the HTML below
Result:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
     <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
    <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  404 &nbsp Not Found</b></font></td>
</tr>
<tr bgcolor="#3F73A3">
    <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
    <td height="23"><img width=1 height=1 border=0 alt=""></td>
    <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.45 </b></font></td>
</tr>
<tr bgcolor="#9DCDFD">
    <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
<br><br><br><br><br><br>
<p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  The requested resource does not exist.</b></font></p>
<p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_parent">main page</A> of this application!</PRE></font></td></tr></table></font></p>
</body>
</html>
The interface, service all are correct. Do you think something else is wrong?
Thanks,
Sandeep

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Customizing server.name and server.port in services-config.xml

Hi
How can i find out what does BlazeDs use for server.name and server.port in
url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
can i customize those values?
thank you

Mete
Thank you for your reply
So context.root is resolved at compile time and server & port at runtime
Do you have an example or a link that shows / explain how to create custom tokens replaced by JVM options?
I have an issue where if i install my app on http://www.mydomain.com/mycontext/, it loads but will display the following message when making server call using Safari
FAULT: faultCode:Client.Error.MessageSend faultString:Send failed faultDetail:Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: http://www.mydomain.com/context/messagebroker/amf
Notte that it works on IE7 when accessing http://www.mydomain.com/mycontext/
and that it works great with all browsers on http://localhost:8080/mycontextroot
Would you know what is the best way to debug this issue?
Thank you
matt

OpenVPN IPv6 client, IPv4 server, Port forwarding?

I'd like to use an anonymous VPN with OpenVPN, but my new ISP only gives IPv6 addresses and IPv4 only via DualStack lite (4in6).
As a consequence, my machine is only reachable with IPv6 Port Forwarding.
The VPN-Provider only supports IPv4.
Now the question:
Can I reach my machine through IPv6 Port forwarding with OpenVPN and get a static IPv4 and Port forwarding(v4) from him?
As I see it:
I should be able to establish a connection with the VPN. I get a static address and the provider is forwarding the ports. Because I made the connection TO him it doesn't matter which ports are open on my side. Right?
Or is it the other way around, that both need ports that can be forwarded?

I guess you mean forwarding from WAN (server) to LAN (client) (both static IPs)?
(Server must be your Internet gw/router.)
NAT requires the ipfw firewall running so you need to add these ports (TCP? and/or UDP?) to the "allowed in" list for the server public/WAN IP. Turn on logging of denied packets to see what happens.

What port number for Desktop Sharing using in Lync Server 2013 and Lync Online

Dear All,
My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
I will deny this port on personal firewall each client.
Thank you for your advise.

Hi,
I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
I hope that helps some.
Kind regards
Ben

WCS reports Radius server port 1813 up and down.

Hi all,
Help me on this, please. I use Radius server 172.20.104.253 and .254 port 1812 to authenticate some wireless clients. However, the .254 keep failling, deactivate on port 1813 (this is from the log); resulting some clients can't authenticate. How do I approach this? Why port 1813 fail effect the authentication which is on port 1812 ?
Thanks.

jedubois!
I use Cisco ACS as my radius. For laptops, instead using pre-shared key, I use radius to authenticated the laptop. I create user/password on AD (username is laptop name). On laptop under Intel Proset/Wireless utility, I create a profile with this username. Upon startup, the Proset/Wireless utility authenticates this user this radius server; then gives the laptop wireless connectivity; no pre-shared key needed.
On the WCS event view; radius server is timeout (activated and deactivated) every 2 seconds (like you said; it is default). But is on port 1813 and I config radius server on WCS on port 1812.
My questions are what is ideal timeout on each radius server? and why radius server report timeout on port 1813 instead of 1812?
FYI, I ping -t both of my radius servers. And radius servers are available all the time.
Regards.

ATG Server Port # and Client Port #?

Similar Messages

Maybe you are looking for