Atheros ar5b95 generates 104 Error: incompatib​le wireless device detected

The intel wireless card failed in CQ61 - 425SA. So i ordered an Atheros AR5B95 that is listed as compatible here at the HP site and at the manufacturer's site. 
Unfortunately, the machine won't boot with the card inserted, generating error message 104: Incompatible Wireless Device Detected. 
I had a look at the BIOS but it's up to date (F.23) and there appears to be no place in the setup menu where I can indicate a different wireless card. I tried installing new drivers but, of course, if the machine won't book I can't install the drivers for the card. 
 The card is imprinted with the AR5B95 identity and Atheros branding, so I presume it's genuine. 
Any  help would be greatly appreciated. 

hp implement whitelisting of wifi cards in BIOS, your original intel would of had hp part number that matched with allowed numbers in the BIOS thus boot without 104 error > your current atheros is a generic atheros card & the BIOS sees no matching part number so flags 104 error.
You have 2 choices, 1: buy a correct hp branded card that is supported by your BIOS , 2: install a no whitelist BIOS so you can use any wireless card .
No whitelist bios link below >
http://www.bios-mods.com/BIOS/index.php?dir=Whitel​ists%2F&download=sp51527_NWL_EISTUlk_MoreOptions_B​...
You may need tape pin 20 on the atheros card with some scotch tape & use windows 7 mobility centre to toggle wifi on/off
Like my post? Click Kudos (thumb+) to show appreciation.

Similar Messages

  • DV7 - Error 03F0 - No Boot Device Detected - Passes both Memory and HDD Test

    Hi there, 
    My DV7 will not boot up at all.  When powered on, I see the HP loading screen briefly, then into "dos type" font saying "No Boot Device Detected - Error 03F0"
    I have run both the memory test and hard drive test from the diagnostic menu and both come back ok.  
    A little more history on the Device/Problem; 
    2 months ago it was shutting itself off due to overheating - After a good cleaning, the temps cooled down enough that it was no longer shutting off.
    I am currently in India, plugging directly into outlets (230v power) using an adapter.  10 days ago there was a small spark at the outlet leaving a very small spot on one of the prongs of the adapter.  There was no power flicker, and it wasn't a surge, just almost like a bad connection sparking.  This "spark" seemed to have killed my charger immediately.  I used the battery until nearly dead, purchased a new charger, but when I returned and tried the new charger, it would not charge, nor power on.  When plugged in, at this point, the power/charging light on the side was lit, but not on the front.  I used a pin to open the CD drive, and the front light lit up, but it still would not power on.
    I took it to a repair shop here in India, and they managed to get it so it would power on (not sure how), but that has only brought me to where I'm at right now with the Error.  They said "It worked, and then we tested again and it didn't work and now it no work".
    My current BIOS edition is F.46.
    Essentially I'm wondering if I'm screwed - and if I'm not, then what can I do to trouble shoot/fix it?  
    P.S.  Finding parts in India that are specific to my computer will be near impossible with the technology differences.  Also, dealing with local techs is extremely difficult so I'll need to know 
    P.S.S.  I just tried to power it on again to double check the accuracy of my post and it will not power on, nor can I get the CD drive open again....

    Is the unit still in warranty?
    Based on the description of the behavior, it does sound a hardware issue beyond the hard drive.
    Was the AC adapter that was purchased an HP adapter? I know you said it is difficult to get the right parts in your area, but I want to confirm if it is an HP adapter or aftermarket.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • 104 unsupported wireless device detected

    I replaced my motherboard with the exact model and now it does not recognize the wireless card.  if i take it off the machine boots and i insert the card and it works fine. 
    OS Name Microsoft® Windows Vista™ Business
    Version 6.0.6000 Build 6000
    Other OS Description  Not Available
    OS Manufacturer Microsoft Corporation
    System Name AMY-PC
    System Manufacturer Hewlett-Packard
    System Model HP Pavilion dv6000 (RR723EA#UUW)
    System Type X86-based PC
    Processor AMD Turion(tm) 64 X2 Mobile Technology TL-60, 2000 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date Hewlett-Packard F.43, 3/22/2010
    SMBIOS Version 2.4
    Windows Directory C:\Windows
    System Directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume1
    Locale United States
    Hardware Abstraction Layer Version = "6.0.6000.16386"
    User Name Amy-PC\Amy
    Time Zone Eastern Standard Time
    Total Physical Memory 3,070.00 MB
    Available Physical Memory 2.05 GB
    Total Virtual Memory 6.18 GB
    Available Virtual Memory 5.31 GB
    Page File Space 3.29 GB
    Page File C:\pagefile.sys
    the wireless card is AR5XB63-H part number 459339-01.
    I have flashed the bios, reset bios to default, updated card drivers, reinstalled the o/s and no luck.. please help..
    Dlo

    Hi,
    Can you you please find something from Amazon.com? As I can return, if does not work for my laptop? (Anything sold by Amazon or in Amazon-Marketplace are return warranted). But eBay is not. Please note I have AC and N type Router bandwidth.   Please find only a AC or N type card as I have AC router.
    I found couple of them in Amazon.com as follows:-
    This is a N type:
    http://www.amazon.com/dp/B002OB0FPI/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1FAGLY8FX8L7J&coli...
    This one is AC & N Type:
    http://www.amazon.com/dp/B00IOS19E6/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=1FAGLY8FX8L7J&colii...
    This HP Part I Purchased and did not work for me..  ! Gave me "104-Unsupported.."
    http://www.amazon.com/gp/product/B009GAJ3YY/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

  • Wireless devices cannot detect my airport connection on imac

    Why can't wireless devices detect my airport connection on imac

    Ensure the media share features and USB drive support is enabled on the router after it's connected. 

  • My pavillion dv2410us stops at an error message 104 unsupported wireless network device detected.

    error at start for hp dv2410us stops at black screen with the next error message
    error 104 unsupported wireless network device detected. System halted. remove device a start

    Hi:
    Did you just install a wireless card?  You get that error if you install an unsupported wireless card. If you did not make any changes to your PC then I don't know what to tell you.
    Paul

  • NWDS is generating IndexedStore Errors when I do reload +rebuild

    Hi All,
    I am working on a Java Webdynpro application in NWDS V7.0.13 with Eclipse 2.1.2. When I am trying to RELOAD + REBUILD NWDS is generating some errors which are not source code related.
    I would like to know why I am getting those errors whenever I rebuild my project. And if I go to the Project Explorer and do DC rebuild and refresh sometimes the errors are gone after 7 to 8 rebuilds.
    I would appreciate if I get any help here as I am working on a critical project.
    The error log shows below errors:
    Error Wed Apr 02 19:25:53 CDT 2008 Apr 2, 2008 7:25:53 PM    com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse  [Thread[ModalContext,5,main]] Error: Refresh of resource C:/Documents and Settings/mkosuri/.dtc/0/DCs/deloitte.com/home/enrolment/_comp/gen_wdp/packages/com/deloitte/component/enrollment/OpenEnrollmentComponent.java fails (org.eclipse.core.internal.resources.ResourceException: Indexed store transactions did not commit properly: C:\Documents and Settings\mkosuri\Documents\SAP\workspace\.metadata\.plugins\org.eclipse.core.resources\.projects\NWP_ESSTRK4_Dhomeenrolment~deloitte.com\.properties.)
    org.eclipse.core.internal.resources.ResourceException(C:/Documents and Settings/mkosuri/Documents/SAP/workspace/.metadata/.plugins/org.eclipse.core.resources/.projects/NWP_ESSTRK4_Dhomeenrolment~deloitte.com/.properties)[272]: IndexedStoreException:Error committing the indexed store.
    org.eclipse.core.internal.indexing.ObjectStoreException: Cannot store page in page store.
         at org.eclipse.core.internal.indexing.IndexedStore.commit(IndexedStore.java:139)
         at org.eclipse.core.internal.properties.IndexedStoreWrapper.commit(IndexedStoreWrapper.java:86)
         at org.eclipse.core.internal.properties.PropertyStore.commit(PropertyStore.java:449)
         at org.eclipse.core.internal.properties.PropertyManager.setProperty(PropertyManager.java:173)
         at org.eclipse.core.internal.resources.Resource.setPersistentProperty(Resource.java:1190)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceNew(GenerationEclipse.java:1344)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.access$1000(GenerationEclipse.java:76)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse$11.run(GenerationEclipse.java:1386)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceInBatch(GenerationEclipse.java:1391)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:268)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:307)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visitComponent(GenerationVisitor.java:297)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visit(GenerationVisitor.java:127)
         at org.eclipse.core.internal.resources.Resource$2.visit(Resource.java:106)
         at org.eclipse.core.internal.resources.Resource$1.visitElement(Resource.java:50)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:76)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.iterate(ElementTreeIterator.java:119)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:60)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:104)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:82)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:99)
         at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:427)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:125)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:181)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:191)
         at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:151)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:165)
         at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:265)
         at org.eclipse.core.internal.resources.Project.build(Project.java:85)
         at org.eclipse.ui.actions.BuildAction.invokeOperation(BuildAction.java:156)
         at org.eclipse.ui.actions.WorkspaceAction.execute(WorkspaceAction.java:122)
         at org.eclipse.ui.actions.WorkspaceAction$1.execute(WorkspaceAction.java:279)
         at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
    org.eclipse.core.internal.indexing.ObjectStoreException: Cannot store page in page store.
         at org.eclipse.core.internal.indexing.ObjectStore.commit(ObjectStore.java:183)
         at org.eclipse.core.internal.indexing.IndexedStore.commit(IndexedStore.java:137)
         at org.eclipse.core.internal.properties.IndexedStoreWrapper.commit(IndexedStoreWrapper.java:86)
         at org.eclipse.core.internal.properties.PropertyStore.commit(PropertyStore.java:449)
         at org.eclipse.core.internal.properties.PropertyManager.setProperty(PropertyManager.java:173)
         at org.eclipse.core.internal.resources.Resource.setPersistentProperty(Resource.java:1190)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceNew(GenerationEclipse.java:1344)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.access$1000(GenerationEclipse.java:76)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse$11.run(GenerationEclipse.java:1386)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceInBatch(GenerationEclipse.java:1391)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:268)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:307)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visitComponent(GenerationVisitor.java:297)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visit(GenerationVisitor.java:127)
         at org.eclipse.core.internal.resources.Resource$2.visit(Resource.java:106)
         at org.eclipse.core.internal.resources.Resource$1.visitElement(Resource.java:50)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:76)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.iterate(ElementTreeIterator.java:119)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:60)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:104)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:82)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:99)
         at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:427)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:125)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:181)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:191)
         at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:151)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:165)
         at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:265)
         at org.eclipse.core.internal.resources.Project.build(Project.java:85)
         at org.eclipse.ui.actions.BuildAction.invokeOperation(BuildAction.java:156)
         at org.eclipse.ui.actions.WorkspaceAction.execute(WorkspaceAction.java:122)
         at org.eclipse.ui.actions.WorkspaceAction$1.execute(WorkspaceAction.java:279)
         at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
    org.eclipse.core.internal.indexing.PageStoreException: Error occurred opening transaction log file.
         at org.eclipse.core.internal.indexing.LogWriter.open(LogWriter.java:39)
         at org.eclipse.core.internal.indexing.LogWriter.putModifiedPages(LogWriter.java:26)
         at org.eclipse.core.internal.indexing.PageStore.commit(PageStore.java:209)
         at org.eclipse.core.internal.indexing.ObjectStore.commit(ObjectStore.java:181)
         at org.eclipse.core.internal.indexing.IndexedStore.commit(IndexedStore.java:137)
         at org.eclipse.core.internal.properties.IndexedStoreWrapper.commit(IndexedStoreWrapper.java:86)
         at org.eclipse.core.internal.properties.PropertyStore.commit(PropertyStore.java:449)
         at org.eclipse.core.internal.properties.PropertyManager.setProperty(PropertyManager.java:173)
         at org.eclipse.core.internal.resources.Resource.setPersistentProperty(Resource.java:1190)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceNew(GenerationEclipse.java:1344)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.access$1000(GenerationEclipse.java:76)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse$11.run(GenerationEclipse.java:1386)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceInBatch(GenerationEclipse.java:1391)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:268)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:307)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visitComponent(GenerationVisitor.java:297)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visit(GenerationVisitor.java:127)
         at org.eclipse.core.internal.resources.Resource$2.visit(Resource.java:106)
         at org.eclipse.core.internal.resources.Resource$1.visitElement(Resource.java:50)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:76)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.iterate(ElementTreeIterator.java:119)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:60)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:104)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:82)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:99)
         at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:427)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:125)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:181)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:191)
         at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:151)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:165)
         at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:265)
         at org.eclipse.core.internal.resources.Project.build(Project.java:85)
         at org.eclipse.ui.actions.BuildAction.invokeOperation(BuildAction.java:156)
         at org.eclipse.ui.actions.WorkspaceAction.execute(WorkspaceAction.java:122)
         at org.eclipse.ui.actions.WorkspaceAction$1.execute(WorkspaceAction.java:279)
         at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
    java.io.FileNotFoundException: C:\Documents and Settings\mkosuri\Documents\SAP\workspace\.metadata\.plugins\org.eclipse.core.resources\.projects\NWP_ESSTRK4_Dhomeenrolment~deloitte.com\.properties.log (Access is denied)
         at java.io.FileOutputStream.open(Native Method)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
         at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
         at org.eclipse.core.internal.indexing.LogWriter.open(LogWriter.java:37)
         at org.eclipse.core.internal.indexing.LogWriter.putModifiedPages(LogWriter.java:26)
         at org.eclipse.core.internal.indexing.PageStore.commit(PageStore.java:209)
         at org.eclipse.core.internal.indexing.ObjectStore.commit(ObjectStore.java:181)
         at org.eclipse.core.internal.indexing.IndexedStore.commit(IndexedStore.java:137)
         at org.eclipse.core.internal.properties.IndexedStoreWrapper.commit(IndexedStoreWrapper.java:86)
         at org.eclipse.core.internal.properties.PropertyStore.commit(PropertyStore.java:449)
         at org.eclipse.core.internal.properties.PropertyManager.setProperty(PropertyManager.java:173)
         at org.eclipse.core.internal.resources.Resource.setPersistentProperty(Resource.java:1190)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceNew(GenerationEclipse.java:1344)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.access$1000(GenerationEclipse.java:76)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse$11.run(GenerationEclipse.java:1386)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.refreshResourceInBatch(GenerationEclipse.java:1391)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:268)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationEclipse.generatePersistentComponent(GenerationEclipse.java:307)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visitComponent(GenerationVisitor.java:297)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationVisitor.visit(GenerationVisitor.java:127)
         at org.eclipse.core.internal.resources.Resource$2.visit(Resource.java:106)
         at org.eclipse.core.internal.resources.Resource$1.visitElement(Resource.java:50)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:76)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.doIteration(ElementTreeIterator.java:80)
         at org.eclipse.core.internal.watson.ElementTreeIterator.iterate(ElementTreeIterator.java:119)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:60)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:104)
         at org.eclipse.core.internal.resources.Resource.accept(Resource.java:82)
         at com.sap.ide.webdynpro.generation.eclipse.GenerationBuilder.build(GenerationBuilder.java:99)
         at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:427)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:125)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:181)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:191)
         at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:151)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:165)
         at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:265)
         at org.eclipse.core.internal.resources.Project.build(Project.java:85)
         at org.eclipse.ui.actions.BuildAction.invokeOperation(BuildAction.java:156)
         at org.eclipse.ui.actions.WorkspaceAction.execute(WorkspaceAction.java:122)
         at org.eclipse.ui.actions.WorkspaceAction$1.execute(WorkspaceAction.java:279)
         at org.eclipse.ui.actions.WorkspaceModifyOperation$1.run(WorkspaceModifyOperation.java:71)
         at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
         at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:85)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
    Thanks for your time and consideration!
    Madhavi

    Solution:
    http://jira.pentaho.com/browse/BISERVER-5282
    Short Fix using find und sed:
    http://jira.pentaho.com/browse/BISERVER-5282?focusedCommentId=91528&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel#action_91528

  • "Open Vi Reference" generates a Error 7

    Hello,
      I am getting "Error 7" from the "Open VI Reference" vi, the name of the vi is wired vi path input. The "Error 7" means that the vi cannot be found. So I went to "Tools ===> Options ===> Paths" and modified the Path so that Labview can find it. But for reasons I do not understand the vi I want to get a reference for cannot be found. So it leads me to beleive that the "Open vi Reference" does not use the path option to find a vi. Any ideas what is going on?
    Regards,
    Kaspar
    Solved!
    Go to Solution.

    Hello,
      Thanks for getting back to me. I have attached a file fo the screenshot of the Block diagram. The "Open Vi Reference" is in the upper left hand corner, which generates a error when I have updated the path options to point to where the file exists.
    Regards,
    Kaspar
    Attachments:
    vi_error.GIF ‏21 KB

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I recently got a new computer because my old one wouldn't let me open creative suite 3 after it generated a error and now I can't deactivate the key to activate it onto my new account.

    I recently got a new computer because my old one wouldn't let me open creative suite 3 after it generated a error and now I can't deactivate the key to activate it onto my new computer. Any help would be appreciated. Thank you.

    You are allowed to have two activted installations, so if the first machine is the only machine with an activated installation there is nothing prohibiting you from installing and activating on the new machine.
    You can contact Adobe Support thru chat to have the old installation deactivation.
    Serial number and activation support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Generate an error message that Adobe Reader 8 or later is required

    Afternoon all,
    I have created a form (in Acrobat 10 Pro) with a lot of scripts and we have determined that they do not all work as desired in Adobe Reader 7 and earlier.
    Is there a way to generate an error message if a user opens this form with Adobe 7 or earlier?
    We would like a message to pop up advising the user that Adobe 8 or later is required for this form.
    It does not have to lock them out or anything, we just want to advise them.
    Thanks much,
    Steve

    Thanks,
    This is how my bosses want this done. For one part, some of the functionality we are using just doesn't exist in Reader prior to version 8. For others, the users don't really have an option to go elsewhere.
    As for thescript, i am not sure how to apply it. Where do i access the initial page's open event?
    I do know how to enter document level scripts (this form has several) but what does "outside of a function definition" mean and how do i do that?
    Thanks everyone,
    steve

  • Final cut pro generated an error or unexpectedly quit

    final cut pro generated an error or unexpectedly quit
    This message appears everytime i want to share my video
    Any suggestions please

    The Following is what I did and it worked for me... Thank You
    Chakravarthy Cuddapah
    Re: Share Monitor error 
    Jun 27, 2011 3:10 AM (in response to Chakravarthy Cuddapah)
    Not sure about this 'solution'. But after a few tries, I noticed that FaceBook feature works only when "Background Rendering' is selected to 'This Computer'. Screen shot:

  • Conversion program generated with errors

    in lsmw idoc method at the step 11 convert data iam getting error as conversion program generated with errors can some body help me .i assigned port ,partnertype and partner number and activated inbound processing but still getting this error.somebody pls help me its urgent.

    Hi Mamidi,
    Go to the LSMW you have choosen and if it is Recording Method you are getting this error.
    Select Goto-->Recordings.
    Select the Recording you have choosen in the Edit Mode.
    Click on the Defaults All Button and save the recording.
    Now go to the option Convert Data and check .
    You will receive a message ..Conversion program successfully generated.
    Thanks,
    Sri

  • An error occurred while trying to access the Apple Wireless Device

    Hello All;
    I just bought an Airport Extreme Base Station today and am all ready having problems. I am running a PC. I connected a Motorola DSL model to the Airport's QAN port and then I connected the computer to one of the Ethernet ports. When I first loaded the software that came with it, things worked perfectly and I was able to connect to the internet. Then, when I opened up the configuration file, and try to enter the configuration manually, I receive the error ... "An error occurred trying to access the Apple Wireless Device. Make sure your network connection is valid and try again". When I try to open the Manual setup I get that error. Also why are the "settings" always grayed out ? I am connected ot the Internet but can't understand why I can't do a manual setup or change any of the settings. I reset my passwords and need to change them again but am unable to do that. Thanks for any help and advice you can give me.
    Tim

    I am about to return this unit to the store I bought it at. I keep getting an error 6753 whenever I try to do any kind of configuration. Most of the configuration options are grayed out in the setup utility anyway. There is a ton of stuff about this problem on the internet. There are a few solutions offered like modify the tcp/ip properties but I sure can't figure out what they're talking about. Not everyone who buys this is going to be tech savvy.
    I'll call tech Support tonite and if they can't offer a permanent soultion, I'm returning the Airport Extreme and separate dsl modem tomorrow and getting a wireless dsl router specifically designed for the PC.
    Tim

  • Troubles generating an error message in WebDynpro ABAP

    Good evening guys.
    I set the following code in enhancement method (pre-method) of ONACTIONNAVIGATE method, which is triggered after push the "Review" button in WebDynpro Application FITE_REQUEST:
    method PRED78YJIDJ8M8KXTC2MXQI1XK5O . "Exit of ONACTIONNAVIGATE (in ZENH_FITV_FPM_02 )
      data: L_CURRENT_CONTROLLER type ref to IF_WD_CONTROLLER,
            L_MESSAGE_MANAGER    type ref to IF_WD_MESSAGE_MANAGER,
            TEKSTO TYPE STRING.
      IF NAVIGATION_TYPE = 'FORWARD'.
        L_CURRENT_CONTROLLER ?= WD_THIS->WD_GET_API( ).
        call method L_CURRENT_CONTROLLER->GET_MESSAGE_MANAGER
          receiving
            MESSAGE_MANAGER = L_MESSAGE_MANAGER.
    report message
    CALL METHOD l_message_manager->REPORT_T100_MESSAGE
      EXPORTING
        MSGID                     = '00'
        MSGNO                     = '398'
        MSGTY                     = 'E'
        P1                        = 'Test'
        P2                        = 'Test2'
       P3                        =
       P4                        =
       MSG_USER_DATA             =
       IS_PERMANENT              = ABAP_FALSE
       SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
       VIEW                      =
       SHOW_AS_POPUP             =
       CONTROLLER_PERMANENT_MSG  =
       MSG_INDEX                 =
         CANCEL_NAVIGATION         = 'X'
       ENABLE_MESSAGE_NAVIGATION =
    RECEIVING
       MESSAGE_ID                =
    ENDIF.
    endmethod.
    Unfortunately, this code is not working, because the message is not appearing. I generated this piece of code with the WebDynpro Code Wizard, but even so is not working.
    The standard application generates standard messages an places them in WDR_MESSAGE_AREA WD component, in the View MESSAGE_AREA, regarding blanks in text fields that are located on another WebDynpro component (FITE_VC_GENERAL_DATA, view GENERAL_DATA_VIEW). I put my own code in WD component FITV_FPM, in the LAYOUT_VIEW. But I wanna the messages also appear at WDR_MESSAGE_AREA WD component, MESSAGE_AREA view.
    Do you know why I am having trouble generating an error message in this standard Webdynpro? It is not possible to generate an error message to appear in another Webdynpro component, but the same WD application?
    Regards guys!

    Hi
    you can store message ID, message no and message type in the context node in ur exit and make this context node interface enabled. Map this node to the component where you want todisplay the message. read the context node .
    Call the method for displaying the messages and pass message id, no and type from context node.
    invalidate this context node using method "invalidate" from interface if_wd_context_node.
    Regards
    Vishal kapoor

  • Generated servlet error: method is undefined for type

    Hi,
    I keep getting the following error when I attempt to run my JSP:
    org.apache.jasper.JasperException: Unable to compile class for JSP
    An error occurred at line: 12 in the jsp file: /jsp-examples/JSPandMySQL/loginuser.jsp
    Generated servlet error:
    The method getValidUser() is undefined for the type LoginDetails
    In my JSP file I have the code:
    <%
    boolean validName = login.getValidUser();
    if(validName == false) {
    out.println("Invalid Username");
    } else {
    out.println("Valid Username");
    %>
    and the method getValidUser(); is in a Java Bean that I have created and the code for that method is just :
    public boolean getValidUser() {
    return valid;
    I've tried searching the net for some answers but none of the solutions given work for mine, I would be grateful for any advice on how to solve this program.

    DId you import the class at the top of the jSP? Does the method exist? Is the class compiled properly?
    - Saish

Maybe you are looking for

  • Trying to install Win 7 on MacBook Pro with OSx 10.9.3 and computer does not recognize install dvd

    I'm using a 2009 MacBook Pro running Mavericks 10.9.3 and I am trying to install Win 7 using BootCamp 5. I've been able to install BootCamp before using the original Win7 install dvd on this computer but ever since I updated it (not sure how many tim

  • Split PDF by pages using command line options

    Hi, I am after a product to split a PDF file by pages / bookmark using command line options.  It would be good, if the product comes with functionality to call from VB/.NET SDK. I googled and came across many products, out of these following looks go

  • Web Service Support for WebLogic

    Add Support for Web Services to WebLogic using IONA's XMLBus For anyone interested in Web services, IONA has just released a free technology preview of iPortal XMLBus, with support for BEA WebLogic 6.0 patch 1. You can download it today from www.xmlb

  • Syncing Labels from Lightroom to Bridge and vice versa.

    The labels in Lightroom over-ride those in Bridge and vice versa.  I have matched the descriptions of the coloured Labels between Lightroom 2.0 and Bridge, yet when I assign eg. a Green Label in Lighroom and then open Bridge, the Label appears White.

  • Grid lost in Design View

    I cannot see the grid even though the Grid and Snap to Grid options are selected on the View tab. Does this sound like my app got corrupted? I mention this because I have similar little glitches within my other CS3 apps.