Atheros Driver to W2K in Satellite M30X - Please help-me

Friends,
Due IT policies in my company i can't use the Windows XP.
I have to my work a Satellite M30X with a wifi mini PCI board, the model is Atheros MB51, and the code is AR5BM5 (i think so thats a part number).
My actual OS is W2k.
My problem is, I don't find the driver to this Wi Fi model for Windows 2000.
I just find the drivers to WXP.
Any people know, how i can get this driver?
Have any generic driver for this wireless board?
I have the same problem with my Infrared in this notebook.
Please, give-me any information to solve these problemns.
thanks in advance,
Svio Barreto

Hi
Unfortunately this unit is not supported for W2K. Please check this page http://www.idicalif.com/LasVegasTechnical2.htm . Under Toshiba drivers you will find Atheros 802.11a/b/g WiFi driver with Cisco/WPA support for Windows XP/2000. I dont know if this will works but you can try it.
Good lukck!

Similar Messages

My iMac's cd drive won't read blank discs please help!!!

iMac mid 2011.
processor: 2.7 GHz intel core i5
memory: 8 gb 1333 mhz DDR3
startup disk: macintosh hd
[Running OS X Lion (10.7.2)]
My disk drive wont read blank cds. Please help!!!

As reported elsewhere, my problem is with a conflict from Western Digital software used during
Time Machine backups. It won't detect blank media and when inserted will not eject until you shut down and restart.
Problem is resolved by dragging WD program to trash.
CD's will now work for burning disks.
Drag back WD software when finished.
Works for me?
Western Digital offer a fix but haven't tried it.

Display Driver for W2k for Satellite L20-112

hello!
i am looking for a display driver for the Satellite L20-112 for Windows 2000.
Can anybody please help me. I am looking for the Driver for a long time. I have the ATI Radeon Xpress 200M.
I downloaded the Catalysp 5.13, but it still say that "Video Driver not found - INF Error".
Thankx for helping
bye

Hi Kevin,
As far as I know the L20 range was only supplied with Windows XP so it is unlikely that you will be able to get a suitable Windows 2000 Display Driver from Toshiba.
As you have already found out it is usually not possible to use the graphics manufacturers drivers directly since the graphics card is specially modified for use in a notebook.
You could try using third party drivers from sites such as http://www.omegadrivers.net/
best of luck

Boot Camp: Seagate External Drive not Recognized in Windows Explorer -- PLEASE HELP!

I'm running in Boot Camp and using a Seagate Free Agent GoFlex external drive as both a Time Machine backup on the Mac OS, as well as a storage unit to exchange files. However, whenever I plug my external drive into my computer while running Windows, it does not show up in the Computer tab under "Devices With Removable Storage", like it should. It does show up on the "Safely Remove Hardware and Eject Media" button in the bottom right hand corner, and it appears as a "Startup Disk" in the Boot Camp Control Panel, so I know that it isn't a cable or USB input issue. Please help me get it to appear as a Device in the Windows Explorer. I need to exchange files from my Mac OS to my Windows OS. Thank you in advance for the help.

I did it but i could not install tool from the dvd. As i said, i can still boot up windows xp i just needs to re-install the service tool.
The drivers are working properly.

Toshiba External Hard Drive not recognized by computer. Please help!

I was wondering if anyone could help me. I have an external hard drive and it will not show up in "My computer" when I plug it in. I have tried other USB drives and other computers. I am starting to think it is a hardware issue but I don't want to lose hope. The blue light is coming on when you plug it in but it doesn't blink and there is no noise whatsoever. Is there anything I can do to fix this issue so that I can recover the information on it? Thanks in advance for any help. It is greatly appreciated.
Additional information: I'm not sure how old this thing is but the model number is HDDR160E03X.

Same problem: I can't see my Toshiba PH3100U-EXB (Gen 2) external hard drive when I plug it in. After awhile I get this error message (see attachment): USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. FOr assistance in solving this problem, click this message."
When I click it, I get a list of USB ports and devices, with Unknown Device in bold face. No real information there.
Yes, I ran Disk Management and the Toshiba did not show up when I plugged it in and hit Refresh.
Does it make a difference that the last time I used the external hard drive, we were in Windows XP and now we're in Windows 7?
Please help! It's not just the backing up I'm worried about...it's being able to retrieve files later!
Thanks!
Attachments:
USB-NotRecognized.jpg ‏28 KB

"Invalid Drive D"..... please help!!!

I am told to download newest version of iTunes v10, it downloads fine, but when I try to run it (along with the iTunes store) it says "computer needs to be modified", and then it says "Invalid Drive D". I have had my classic for over two years, and I have never had a problem with either my library or the store. I can still access my library with the old version, but I cannot get into the store because it keeps saying I have to download the new iTunes version. Please help! I am out of ideas and I do not know what to do. Any assistance would be great. Thanks. I am running Vista if that helps, and I do not know what version of iTunes I am currently using.

The following user tip is worth a try with that one:
"Invalid Drive X:\" install errors

I have external hard drive and I cant make changes in it, such as deleting photos or adding photos to external hard drive from macbook pro. could anyone please help me. I don;t know what to do...

I have macbook pro. I can not make changes in external hard drive such as deleting photos also I can not add photos to external hard drive. could you please help me?

That's the way.
The drive is probably formatted NTFS which is Windows proprietary file system. Mac OS can read it, but not write to it.
You can do as suggested by TheDave if you have sufficient HD space for temporary storage. Depending on whether you need to continue using the drive with Windows machines there are a few options.
Best for Mac only use is to re-partition and format as GUID partition map and Mac OS Extended (journaled)
For dual use, Leave the partition as MBR and format as FAT32 (MS-DOS in Disk Utility). This has a file size limit of a little over 4GB, but can be read and written to by both Mac and Windows.
There is also exFAT (aka FAT64) if both OSs support it - no file limit there that you'll ever reach.
Alternatively there are software solutions which will allow the Mac to read and write to NTFS drives. I'm told they're not as good as the other solutions, but may be an option if you haven't space to store the contents while re-formatting.

New Printer HP2540/301 Acer Aspire 1 laptop has no disk drive and an idiot user. PLEASE HELP....

I bought myself a nice new 5240 all in one 301 printer on Wednesday.
Since then i have done nothing but fight with it ever since.
My laptop is an Acer Aspire one, one of the smaller ones, which unfortunately doesnt have a disk drive in it. My first thought went to downloading drivers. The web page didnt work and i realised then, that without the user manual (which i suspect is on the disk) i am totally lost.
So could someone please help me.
I have done a print out, which says.
Check your HP printer network name (SSID) matches your wireless router network name (SSID) exactly.
If they do not match exactly, run the wireless set up from the printer software to configure your HP printer.
I am assuming this is the software on the disk. Is there a way of downloading the software from online?
Any help would be gratefully accepted as i have no clue what i am doing atm. I am only just starting to learn how to use Windows 8 properly atm, up until now my whole computer skills hass been how to open a browser and office.
Thank you.i should also add, i have downloaded the app too, but that doesnt recognise that there is a printer there at all.
This question was solved.
View Solution.

Hi, here is the link for the driver.
Link for the user's guide.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Ibook G3 700mhz dual drive dead after installing 10.3 please help!

hello
this is my first apple mac and i bought a ibook g3 powerbook which is:
700mhz processor 512k level 2
128mb SDRAM + 256mb stick
20GB ultra ATA hard drive
combo drive
400mpbs firewire port
video VGA
i updated it to 10.2.4 from 10.1 and it worked absolutely great :O)
i then got a 10.3.4 disk this is when problems happened to 'narna' (my G3) i loaded disk first time i did an upgrade install and i did custom install (i didnt want printer drivers and languauges on so disabled them) about 10 mins later came up with error while installing so i quit install, restarted 'narna' and reset cd off again to upgrade....
the second time i forgot to deselect printer drivers and while installing them 'narna' froze. so i had to put power plug out to get it to restart up.
i switched back on and got a grey language screen telling me to press power button to restart. thats all i get...
i've tried option button with disk so i can select the drive from which to start it up and my drive is there with 10.3 on it with a red cross on the box. if i selct that drive to boot 'narna' up from it restarts computer and then while it loads i get the grey apple screen and then it freezes again but this time i get lots of grey/white lines across the screen...
i think thats all the information...what i'm after is there any way i can solve this etc without completely wiping my computer :O( i have the original 10.1 disks but i tried those i can get on and open OS9 on the computer and it shows my other OSX drive with 10.3 wrote next to it... but the restore disks dont seen to do anything with my computer as it just gives my same messages to restart/boot or takes me to drive then it crashes...
please please please help! i've never had an apple mac before so not sure what to do to help it....

Hi giantbutton,
A good first step after any significant crash on a mac, especially if it occurs during an installation of software etc, is to start up from your OS CD or DVD (just like you would if your were trying to install software) but to then run "DiskUtility" instead of the installer. You can access DiskUtility from the "Installer" menu on the menubar when booted from the Panther DVD.
Once Disk Utility is running select your Hard drive in the panel on the left of Disk Utility window and click on "repair disk". Disk Utility will test the drive and repair problems with its directory structures if it can.
Once the "repair disk" process is complete use the "repair permissions" process.
If the repair processes works then you can try a fresh installation of Panther. If not, then your best option is probably to wipe the drive and start from scratch on a "clean" disk.
It is always a good idea to use Disk Utility to "repair" the disk and permissions before installing any OS upgrade or major piece of software.
http://docs.info.apple.com/article.html?artnum=106214
http://docs.info.apple.com/article.html?artnum=162662
http://docs.info.apple.com/article.html?artnum=25735 and
http://docs.info.apple.com/article.html?artnum=107120 provide some useful information
As far as the memory requirements go, it depends a lot on what you are doing with your computer. If you are running regular "office" type software, browsing the web , etc then 384 MB should be fine for Panther, though you may not want to run too many programs simultaneously. For "heavy duty" tasks (video editing and the like) , though it would be seriously limiting.
Cheers
Rod

My Hard Drive Won't Slow Down! please help

Hi everyone,
I just got my B&W powermac up and running again after some upgrades: a radeon 7000, 500 Mhz Sonnet G4, 1gig of RAM... Well all of a sudden my hard drive just spun all the way up and will not slow down no matter what. I went to system preferences and checked "put discs to sleep when possible" - Nothing. I ran Onyx and cleared all my caches and what not - Nothing. I have restarted, reset my PRAM, pressed the CUDA button... I'm out of ideas. And my hard drive is raging like it is booting up or something so I don't know what to think. Please help me slow my hard drive down. It is a WD Caviar 40G, and I am running OS 10.3.9 and it is totally up to date. Thanks so much for any suggestions!
-Kurt

I don't think it's a ribbon issue. I checked it out. As for the jumpers, I'm not really sure exactly what to look for. I have only messed with jumpers one time and I was following a chart to set up a slave drive on a Dell and it was a long time ago... On My B&W, what exactly would I looking for if it was a jumper problem?
Thanks again, in advance!
-Kurt
PSL here are the specs on my HD if that helps at all
WDC WD400BB-00DEA0:
Capacity: 37.27 GB
Model: WDC WD400BB-00DEA0
Revision: 05.03E05
Serial Number: WD-WMAD11139002
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ATA
Unit Number: 0
Socket Type: Internal
OS9 Drivers: Yes
Mac OS X:
Capacity: 27.51 GB
Available: 20.52 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s6
Mount Point: /
Mac OS 9:
Capacity: 9.76 GB
Available: 9.46 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s7
Mount Point: /Volumes/Mac OS 9
iBook G4 1.33Ghz with 1.25Gb of RAM//Powermac G3 (sonnet G4 500mhz) Radeon 7000 Mac OS X (10.4.7)

Cant install HP psc 1402 series driver for windows 8...please help!!!!!!!!!

I recently switched to windows 8...Upto that time everything was working fine...so when i upgraded to win 8 i downloaded the driver files for hp psc 1402 series...but when i start the installation ,the setup starts but it cannot detect my product...so after many attemps it finally detected it...and it installed the following devices-
1)HP imaging device
2)HP Printer
3)Photosmart 1400 (Dotf4Print)
It couldnt install the main component i.e HP Psc 1400 Series ...I manually tried install it from device manager but it couldnt find the driver
So i intalled this device from a old xp driver for hp 1400...
but the problem is that now when i print a document from my pc ...it does not print the tables...
please help me as soon as possible.. as i need to print an admit card for my interview before 13 of april.
i dont want to downgrade to win xp..
Please note that im still using win xp driver for hp psc 1400 series as i coundnt intall the win 8 version.

Hi AlwinJ,
Welcome to the HP Forums!
I understand that you are having trouble installing your PSC 1402 printer.
I would suggest doing another uninstall. Uninstalling the Printer Software. Then re-install using the HP Printer Install Wizard for Windows.
Hope this helps, and thank you for posting.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do i put movies on my hard drive into itunes? so frustrated please help

I just got my 80G iPod and i cant seem to figure it out. Please help.

Well my buddy has his own movies on his iPod that he did not buy from the iTunes Store(i cannot call to ask him how), and the guy at the Apple store told me that yes it is possible to put your own movies onto your iTunes by converting the movie to the right format- and he said that you can purchase Quicktime Pro and it will make it the right format- but i was wondering if there was a different way.

How to delete a BIOS password (Satellite A30) - please help

Hello. In the company I work there was a Toshiba Satellite A30 that had a BIOS password set.
I was asked to remove the password and, inside the BIOS, I was able to clear the password (at least that is what I thought at first):
BIOS asked for the current password and I typed it, then asked for a new password and I just pressed the ENTER key, and when I was asked to retype the new password I pressed the ENTER key again.
After that, I saw that BIOS showed "PASSWORD (clear)" and I saved the changes and exit.
To my surprise, I was asked for a password again, I just pressed the ENTER key and it showed an "INCORRECT PASSWORD" message, and the same message when I type the old password!!!
I don't know if there was a Toshiba password when the computer was bought, but the manual that I downloaded from here does not mention that.
Is there a way to fix this? I can't understand what may have happened!
VERY MANY THANKS IN ADVANCE and thanks again for reading.
[Edited by: admin on 06-Aug-05 08:27]

Hello
If the right password is not known to you there is no way to remove them. It can be removed only by Authorized service partner. Please contact them and they will do it for you. I assume that this can not be expensive.
Check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true .
Bye

OMG!!! I lost all my data on my external and my internal drive has been wiped clean! Please help

I bought a very good condition, used macbook pro 4.1. While attempting to transfer files from one of my external drives, some how I erased both the external drive and the internal drive. I didn'y get install disks with it either. I am in a huge panic as I am a 3D graphics designer and had over 5 years woth of work on the external. Can anyone help please? Hopefully something that won't cost anything as I am totally broke, and gonna be much worse if I can't retrieve my client's property

My computer is not working, is my personal data lost?
.Create a data recovery/undelete external boot drive
Erase, formatting, OS X installs on Mac's

My DVD/CD drive is no longer playing movies please help!

Up until today my dvd drive has been working fine however, today it has suddenly stopped first of all a dvd would not play and was stuck in the machine for almost 2 hours, and then the dvd player would not work and came up with various system error message. But now both are working and the computer recongnises the dvd and cd however they just do not play in any video player such as the one that comes with apple and vlc. I have tried disk utilties repair, smc reset. Does anyone have any other ideas?

Hello jess_12
Check out the article below for some troubleshooting options for your SuperDrive on your Mac
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Atheros Driver to W2K in Satellite M30X - Please help-me

Similar Messages

Maybe you are looking for