[Athlon64] ATA HD, Core Center and Drivers problems...

My first problem is about my hard drive. I just recently build a new system and this is my first S-ATA Drive. It is a Seagate 160 gigs (ST3160827AS) and everything works fine... But my hard drive appears in the icon that said "Safely remove hardware". I know this is not an external HD, is internal, and I tried to install it on a Dell computer (Dimension 4700) and it was installed as an internal drive, the way it should be, not like a USB one... so does anyone know how to fix this? I'm not having any performances problems that I'm aware of... but I know this is not right...
My other problem is with tha Core Center, Digicell software... Everynow and then I get the following 4 messages, and both softwares failed to run from the start:
Core Center (Failed to load hardware monitor driver)
Digicell (Failed to load!)
Core Center (No Hardware Monitor)
Core Center does not support your motherboard!
I don't know what is the problem... I have a K8N NEO4 Platinum SLI so it is impossible that my MB is not supported... any clues about this?
My last problem is about some devices that are not correctly installed that appear in my device manager...One appear as a Other PCI Bridge Device and the other in the Raid controllers section as Mass Storage Controller. I tried to install the two floppy's that came with my MB but they don't seem to work...I also have this option in Windows update to install the Silicon Image Silicon Image SiI 3132 SATALink Controller... but Everytime I try, I get an error message... If anyone any solutions for this problems, please help me.... thank you in advance...

Press Start...then right click up at the top, pick Properties, then choose Task Bar....choose Customize...then look for the Safely Remove Hardware listing...then pick Always Hide!
Go to Add or Remove Programs in Control Panel, and delete CoreCenter and DigiCell. Then, try re-loading those programs form your MSI CD.
Personally...I don't use any of those, and find SpeedFan a much more accurate utility. You can download it from www.majorgeeks.com
If you are not using a RAID system...you don't need Silicon Image Controller.
Load your MSI CD, and go to Device Manager, and right-click on Other PCI Bridge Device, and choose Update Drivers from a specific location. It should find the application on your CD, then load.

Similar Messages

Problem with Dual Core Center and MSI 3870

Hello again, my previous thread is this:
https://forum-en.msi.com/index.php?topic=113164.0
The VGA works well, the problem is that AFTER i installed it the Dual Core Center stoped to work!!
Installed the dotnetfix again but no avail, still doesn't work.
And i know that happened after installed the VGA, so i believe that must be part of the problem.
Thanks!

Try the latest version of Dual Core Center.
You will find many alternatives for DCC here: https://forum-en.msi.com/index.php?topic=107133.0

FSB differs in core center and BIOS...

I know my FSB is set to 200 (the default value) but on CoreCEnter (lattest version) it shows 203... I'm not in a mood to make OC before getting rid of this stock cooler (but that will not be for now) so I wanted to put FSB at 200, I know the differecen isn't much and the system is runnin fine but I simply don't want it...
I have 865PE Neo2-LS and I've disabled DOT in the BIOS (1.5). Do you know what's the problem?
By the way, I just clicked "default" on core center, on the fsb and voltages menu and the CPU just locked-up and a loud sound like PPIIIIIIIIIIIIII wouldn't stop... I rebooted and worked fine but what's the problem?

What you are seeing is the dynamic overclocking feature. If your Frequency setting is set to anything other than "disabled" Core Center will attempt to find an appropriate clock setting for you, based on processor demand and processor temp.
I prefer this to traditional overcocking because it only "kicks in" when I need it.

MSI P6N SLI Platinum, Dual Core Center and Mem Voltage

I set my memory voltage for my Corsair sticks to 2.0 just as TheRamGuy at Corsair's House of Help forum had suggested. However, in Dual Core Center, it reports that the Memory voltage is at 2.7!!!!.
I seem to vaguely remember some threads somewhere in one of the forums about the MSI boards frying higher voltage memory, and so am concerned to say the least.
Or is there a better program that can display the Memory voltage?? Or do I believe the Dual Core Center readings?

Quote from: NovJoe on 13-April-07, 16:01:41
CPUID would let you know if your RAMs are running at the correct timings.
You can try SisoftSandra or Everest to check on the detected voltage in Windows.
OK, I've downloaded both SiSoftSandra and Everest. I don't see anywhere where these programs report/measure a memory voltage. One one screen, it will report on the SPD settings for the memory and lists the rated RAM voltage "setting", but not the actual juice going to it.
Oh, well. Must just mark it off as one less thing to worry about

Bootcamp Windows 7 install issues...can't pick a partition and drivers problem

I have two issues actually.
1. When I attempt to install Windows the setup begins but then it says that some required drivers aren't available. It tells me that I can eject the installation CD for this portion and put in a disc that has the drivers, but I can't eject the Windows 7 install disc. The eject key doesn't work and there's no manual eject pinhole on an iMac.
2. At the beginning of the setup, I'm not getting a prompt that tells me to select the partition to install it on. I don't know if that's supposed to come later but I don't want to install Windows over my Mac OS X partition.
What am I missing here?

I have this exact same problem with a 2010 iMac. I miraculously installed windows 7 back in 2010, but somehow in 2011 I'm getting this problem.. Please help!
I've tried reformatting my whole HDD, fresh installing snow leopard and then boot camp, and the same exact problem occurs. I am using a retail copy of Windows 7 Home Premium. It is an OEM version - is yours also OEM?
I have also using the windows 7 dvd to usb tool, and connected a usb stick with windows in it, but this doesn't help. I have NO IDEA what drivers windows is asking for on this dialogue box, as this is not specified. The only thing I can think of is drivers to read / write from the hard disk itself?
I greatly appreciate anyones ideas!

Powering off and Drivers problem.

Hi,
I just built my new rig afew days ago and all was well for until this morning. My rig keeps powering off by itself (no bsod or anything even though auto shutdown is disabled) and the power led on the case starts to flash on and off every second also the keyboard seems to still remain active (numerical lock led stays lit but non of the keys respond). The shutdown occur randomly and the only way to power back up is to disconnect the power cord for afew minutes and try again. I will be replacing the cheapo power supply with a Enermax EG465AX-VE in afew day hopefully but before I go out and blow £70 on one could anyone confirm this to be the most likely solution or could I try something else first.
The second problem I have got is that I can't install the Via 4in1 drivers (v4.51) and/or detonator drivers for the MSI FX5600XT card with out getting random lockups/frezzes and some programs failing to install e.g 3dmark2001 hangs half way through installation. I have re-installed Windows and am using the standard MSI drivers that came with the card. I also managed to install and run 3dmark2001 and Prime95 for 12 hours without any problems. But once I installed the Via drivers and/or Detonators /v45.27/v52.14/v56.64... and have AGP mode 8x enabled, I started to get those random lockups again so I uninstalled them.
Any ideas would be greatly appreciated.
System Spec:
AMD A64 3200+ with retail HS/F (Idle temp:42C, System temp: 36C)
MSI-6702 K8T800 Neo FIS2R with Bios rev: 1.4
2x 512Mb DDR400 Geil Value Ram (running at CAS: 2.5, TRAS:6, TRCD:3, TRP:3, Bank Interleaving:Auto, Burst lenght:8 Beat, AGP Mode can only select: Auto) @ 200Mhz) at v2.55 in bios.
Maxtor 160Gb SE
MSI FX5600XT with standard MSI Drivers (v5.2.1.4) that came with the card. Agp Fastwrites disabled, Apature 128Mb in bios, AGP mode: none.
DLink 530TX NIC
Plextor 40-12-40 CDRW (Secondary master)
Lite-on DVD Player (Secondary slave)
CTK el cheapo "550W" PSU (Max output 3.3v:28a, v5:45a???, 12v:20a) v3.3+ v5 combined: 280W.
Windows XP Pro with SP1 no updates added atm.

Hi,
I have installed the via drivers after uninstalling the MSI detonators then reinstalled detonator v56.72. I can now faithfully reproduce the 'invite loop error everytime I click on the FX5600XT tab in display setting and am getting a 'infinite loop error' 0x0..0EA. I have swapped both sticks of ram around tried one at a time but no joy.
@jacko
I am currently running on one stick , no shutdowns yet but it's still early days.
kHel.

[Athlon64] K8T NEO2-F motherboard and memory problem. Please help :(

I just recently built my first computer and everything seemed to be working fine. However, my two RAM chips had corrupt memory sectors so I had to replace them. Upon buying 4x256mb chips to replace the 2x512mb chips, I discover that 1 & 2 DIMM slots worked and the 3 & 4 DIMM slots do not. When i try to put RAM chips in there (which work when put in slots 1 & 2) the computer will not even start up. I've tried diff. combinations of slots, even using the old chips (which work but causes programs to crash occationally). But nothing seems to make DIMM slots 3 & 4 to work. Any ideas? Thanks for the help.
-Ender811

How about giving complete specs. I am pretty sure I have an answer that will fix you up but I want to know which CPU core you have and what Bios your running. Those are the two important things on this issues at the moment but save us all trouble and do a complete set of specs for your signature. and then we will help you.

NX7600GT Diamond Plus and fan speed with Dual Core Center

I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

Quote from: BOSSKILLER on 17-January-07, 00:44:11
well no need to edit manually, MSI provided everythink in easy way from core center.
select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
suggest you to read help section from program.
So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

MSI Core Center Problem with the software

Hello all
Just wanted to let you know about a problem i had the other night. You will see my specs below but i recently installed core center and all was running well until 2 nights ago when the pc would start up into windows load up core center and then re-boot. The problem was core center it's self when windows was starting it up for some reason core center decided to overclock my pc i only realised this when i saw a brief glimpse of the CPU speed as core center started it was over 2.6 GHZ no wonder the machine shutdown i eventually got it to boot up and get into core center where i found that this time it was trying to run my machine at a FSB of 215 i reset this back to 200 and the re-booting stopped i decided to just un-install core center to save any further problem.
Have any of you guys had this problem and how many are having a similiar problem but don't realise it thinking it is the cpu or heat related just thought i would let you know about this in case anyone does have a similiar problem
Cheers everyone

i didn't even install it to tweak or overclock i was only using it to monitor my temps etc. seeing as it came on the installation disk did look at the overclocking features of it but after looking at them i returned to the default settings prefering if and when i try overclocking to do it through the bios. I was surprised as anyone that core center decided it was going to overclock my system on it's own, Maybe it's become self aware LOL
I just put this thread up in case anyone else has it installed and has similiar problems as i did so they can check to see if this is their problem thought it might be helpful as i know lots of people do have problems and find there way here looking for help

P6N platinum and Dual Core Center

Hi,
When I attempt to use the Dual Core Center I get an error:
0xc0000005 Program failed to start, press OK to end.
I have updated the BIOS, Dual Core Center, Nvidea drivers, .NET framework etc no change.
Tech support told me that the Dual Core Cell chip on the board was bad so I got a second board without change.
I really don't care about the OC'ing features, I want to monitor temps and control fans.
I have tried Speedfan, it does not control the fans plugged to the mobo headers. Neither does Nvideas tool (Nview).
Infact nothing I have tried will control the fans.
Suggestions?
(Aside from returning both boards and going with a different brand)
Components List:
MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX
EVGA 256-P2-N740-LR GeForce 8500GT 256MB GDDR2 PCI Express x16
FSP Group (Fortron Source) AX450-PN ATX12V 450W Power Supply
Intel Core 2 Duo E6600 Conroe 2.4GHz LGA 775 Processor
Crucial 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 667
SAMSUNG SpinPoint T Series HD403LJ 400GB 7200 RPM SATA 3.0Gb/s
SAMSUNG DVD burner
MAXTOR 40GB HDD (PATA, moved frmo old PC for transfer of files)
USB Wireless Network
Windowx XP Home, SP2

Quote from: Maverick0984 on 20-July-07, 22:44:21
I think the program is horrible...don't waste your time with it.
If it works, good! It doesn't tend to fuss.
But if it doesn't work, uninstall it.
CoreTemp and Everest like Jack says are the best.
Fan speeds however your out of luck with. You can submit a report through Speedfan to the author however.

Core center problem after flashing

i have
(2)operating system in my computer (win-98se)
and (win-2k).
newly I have flashing my BIOS with latest version of
liveupdate and now evrytings are running
good.
but whenever corecenter running in my computer in (win-98se)
I see a blue screen with this content:
( A FATAL EXCEPTION 0D HAS ACCURRED AT 0028:E9742715 IN VXD RUSHTOP (01)
+00000245.THE CURRENT APPLICATION WILL BE TERMINATED )
and when runing in (win2k) that have result in restarting the system .
but i dont have this problem with previous BIOS version .
withal :
i have this problem with previous version of core center and latest version
of that after flashig !
can anybody help me ?
[email protected]

What Version of Core-Center are you running?...Sean REILLY875

HP solution center home screen problem?

Hi guys,
I just boat All in one inkjet K209g. I installed all the drivers from CD on Windows Vista.
And I have a problem in homescreen. Here is the picture?
Basically, I can not see any feature buttons: Scan, Print.
I have installed all the drivers properly. It can print properly, the scanning function is not working.
I also checked with HP Scan and Print Doctor, "HP Twain Scan" failed and it says "Unable to connect to scanning software"?
I reinstalled, restarted, reconnected but nothing worked so far?
This question was solved.
View Solution.

Hi nomalum, I noticed your post about your issue with your Solution Center and scanning problems. I see that you have installed the software using the installation disk.
I recommended the following:
1. Uninstalling the software. Click here to uninstall
2. Restarting your computer.
3. Reinstalling the software from the download. Click here to install
I hope this helps you, take care.
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Core Center freezes after 15 seconds

I dont know if its MOBO related or if its Core Center thats the problem.
When I start Core Center its ok but if i leave it running for more than about 15 seconds, the entire pc freezes and i have to reboot.
Regrdless of weather it is in the sys tray or maximised.
This problem also happens with PC Alert 4 (which I see has now been removed from the MSI download site)
I am running Core Center v 1.7.2.0
any ideas ?
thanks
Bubba

I haven't used CoreCenter in a long time, but if I remember correctly there is an Auto button that will overclock the computer until it crashes.
You should try to configure a utility like SpeedFan instead. CoreCenter seems to cause problems for the vast majority of users. It's a piece of software that seems to be worth exactly what you paid for it.

Having trouble with voltage alarm in core center

I hadn't used this comp for about a year, just put it back together and added the kingston ram to it that a buddy gave to me. Just found Core Center online and installed it. The problem i'm having is that the alarm is going crazy. Don't have alot of experience overclocking, and i'm not actaually trying to at all. I've been having programs close and games freeze up because of overheating. This is what I see when I look at the core center.
on the left
1.39 v
Vcore
2.72-82 v (flashing red)
3.3V
4.97 v
+5v
11.84-90v
+12V
If I open the tab, the FBS says 200mhz and is flashing blue to black
doesn't look like i'm having any problems with cpu temp. 35 'C
Any help would be appreciated.
Thanks

Quote from: kourosh on 19-November-08, 01:58:25
do you know how to enter into bios if so then click on default save and exit then see what happens, somehow it looks the voltage for memory has been set 2.7 or 2.8 volt which is too high it should be 1.8 or 2.5 volt
Yea its at 2.5 i beleive. I reset everything to default, and it has been since i put everything back together. Before i had core center installed it was crashing guild wars, and wow consistantly because of overheating. I'll unistall core center and get a monitering app instead.

K8t neo fis2r - core center not functional after installing sound card

Hi. I had been using Core Center with Dynamic Overclocking enabled and all was well. When idle, my amd64 3000+ (2.0ghz), was running at 800mhz. Under load it would go up to 2100mhz. But yesterday, I installed an Auzentech x-plosion sound card and after i installed the driver, the dynamic overclocking stopped working, my cpu is running at max all the time. (The variable fan speed function still works).
I checked the IRQ and there is no conflict, I uninstalled the amd64 driver and core center and reinstalled. Still does not work. I uninstalled the auzentech driver, rebooted, and cancelled new hardware wizard. Then the variable cpu frequency feature worked. Once I install the driver for the auzentech, dynamic oc stops working. I was thinking to try another pci slot but it appears to be a software issue rather than a hardware issue. The new version of Core Center does not work with my board even though msi says it's compatible so I'm still using the one that always worked. The amd driver is the latest and also always worked.
Has anyone else had a similar problem, perhaps using the auzentech sound card with this board and Core Center? Or does anyone have any suggestions?
Thanks!
K8T Neo FIS2R
AMD64 3200
AMI bios version 2.2
1.5Gb pc3200 memory
nvidia quadro FX 1100 128mb AGP
Antec 430W ps

Hey guys, I just went to AMDs site to get the dashboard utility mentioned and in the readme, it stated that in XP, the power option needs to be set to portable/laptop. But in the past, I read that it needed to be set to "always on" and that it is, in fact, what I had it set to before when cool n quiet was working. Now I change it to "portable/laptop" and it works and set to "always on" doesn't work anymore. So now Core Center reports I'm at 33c @800mhz at no load. I don't get it??? I'll have to try an alternate utility just to verify that is indeed working.
btw, QV, I checked system properties, (right-click my computer > properties, or "system" in control panel) and on the "general" tab, it indicates an AMD64 3000+, 2.0GHz. But I'm pretty certain the clock frequency is dropping now as reported by core center because of the decrease in the cpu temp at idle. Am I looking in the right place in XP? I have XP pro, SP2
Again, thanks for the input and Happy New Year

[Athlon64] ATA HD, Core Center and Drivers problems...

Similar Messages

Maybe you are looking for