[Athlon64] CPU cant see my other HD I want to use for storage

Ok so I have the msi k8n-neo v with 3000+ athlon 64, Im running win xp 32, I had too much problems with win xp 64 ( wasnt running my games well ) ANYHOO... I have a 120 gig sata WD HD, now I have this other HD WD 40gig but its not SATA.  It has windows installed on it already, I just want to use it for extra space maybe a new partition for storage, and I hook it up and my CPU doesnt even see it.  Most cases I cant even boot it up. It goes to my logo screen and stays there.  IF i hit tab I can go to this other menu, but cant make any choices and it scans my hardware.  I even tried running my win XP setup disc but I think its asking for my driver boot disc.  Im just afraid to use it cause I dont want my main HD to lose any data or become corrupt where i have to re-install windows AGAIN for the 6th time in the last two months LMAO.  Anyway I THINK (prolly wrong) that I have the little slave/master doohicky in the wrong spot.  I have tried it in every single spot but I still cant get past my logo screen.  the 40 gigger is hooked up to the MOBO from one IDE cable its not a slave on that cable just one cable from the HD to the MOBO in slot two.  Slot one is occupied by my dvd rom and my cd rom.  Can anyone help me out on this one?  Im still kinda new to all this but learned a hell of a lot in the last year!!!!!!!!

...put the SATA drive in and start it up to make sure it's still working...if it's OK, shut it down...
...remove the jumper from the Western Digital 40GB drive...connect it to the far end of an IDE cable...connect the other end to your motherboard...start your machine...
...after Windows boots click Start > right-click My Computer > Manage > highlight Disk Management in the left pane > see if the 40GB is there > it should be > click the drive in the right pane > Action > All Tasks > Format...after Fomat you may have to go back to Action > All Tasks > Mark Partition As Active...

Similar Messages

  • MOVED: [Athlon64] CPU cant see my other HD I want to use for storage

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] CPU cant see my other HD I want to use for storage

    ...put the SATA drive in and start it up to make sure it's still working...if it's OK, shut it down...
    ...remove the jumper from the Western Digital 40GB drive...connect it to the far end of an IDE cable...connect the other end to your motherboard...start your machine...
    ...after Windows boots click Start > right-click My Computer > Manage > highlight Disk Management in the left pane > see if the 40GB is there > it should be > click the drive in the right pane > Action > All Tasks > Format...after Fomat you may have to go back to Action > All Tasks > Mark Partition As Active...

  • Hi, I've got no music or videos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks

    Hi, I'm unable to see if I have any music/videos/photos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform when  transfering music/videos to the ipad. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks

    23 GB  of other indicates a corrupt file(s).  A restore should resolve.

  • I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

    I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

    Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

  • Need Help Connecting (2) 2950 switches together, cant see each other

    Can anyone please help me get my switches talking?  I am currently in training for entry level certs and can't continue until i get these talking. 
    I have two 2950 switches connected via port 0/1 on both switches.  (tried both crossover and regular cat5 connections)
    I have both ports active and both VLAN 1s active and both ports set to switchport mode trunk
    There is no port security enabled.  Both switches have IP's assigned in the respective default VLAN 1.   
    IP address 10.1.10.10 for switch 1
    IP address 10.1.10.11 for switch 2
    VTP is set to server on both, ( I tried transparent on both as well )
    I cant get these switches to ping each other and or access telnet from each other.  If i connect an outside connection i can telnet individually to each but they wont see each other through ping or CDP Neighbors. 
    Any ideas?? Please help as i am trying to get my CCENT in a few weeks!
    THANK YOU!

     ******* SWITCH 1 LOGIN *******
    User Access Verification
    Password:
    SW1>en
    Password:
    SW1#show run
    SW1#show running-config
    Building configuration...
    Current configuration : 1884 bytes
    version 12.1
    no service pad
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    hostname SW1
    enable secret 5 $1$TIuw$zBOptQNhwsRgZ6Frv.PVx.
    ip subnet-zero
    ip ssh time-out 120
    ip ssh authentication-retries 3
    spanning-tree mode pvst
    no spanning-tree optimize bpdu transmission
    spanning-tree extend system-id
    interface FastEthernet0/1
     switchport mode trunk
    interface FastEthernet0/2
     switchport mode access
    interface FastEthernet0/3
     switchport mode access
    interface FastEthernet0/4
     switchport mode access
    interface FastEthernet0/5
     switchport mode access
    interface FastEthernet0/6
     switchport mode access
    interface FastEthernet0/7
     switchport mode access
    interface FastEthernet0/8
     switchport mode access
    interface FastEthernet0/9
     switchport mode access
    interface FastEthernet0/10
     switchport mode access
    interface FastEthernet0/11
     switchport mode access
    interface FastEthernet0/12
     switchport mode access
    interface FastEthernet0/13
     switchport mode access
    interface FastEthernet0/14
     switchport mode access
    interface FastEthernet0/15
     switchport mode access
    interface FastEthernet0/16
     switchport mode access
    interface FastEthernet0/17
     switchport mode access
    interface FastEthernet0/18
     switchport mode access
    interface FastEthernet0/19
     switchport mode access
    interface FastEthernet0/20
     switchport mode access
    interface FastEthernet0/21
     switchport mode access
    interface FastEthernet0/22
     switchport mode access
    interface FastEthernet0/23
     switchport mode access
    interface FastEthernet0/24
     switchport mode access
    interface Vlan1
     ip address 10.1.10.10 255.255.255.0
     no ip route-cache
    ip http server
    banner motd ^C ******* SWITCH 1 LOGIN ******* ^C
    line con 0
     logging synchronous
     login
    line vty 0 4
     password vty
     login
    line vty 5 15
     password vty
     login
    end
    SWITCH 2 BELOW
     ****** SWITCH 2 LOGIN ******
    banner motd
    User Access Verification
    Password:
    SW2>en
    Password:
    SW2#show run
    SW2#show running-config
    Building configuration...
    Current configuration : 1894 bytes
    version 12.1
    no service pad
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    hostname SW2
    enable secret 5 $1$nSFY$umNCHgrkLGTwHyI.dkbJf.
    ip subnet-zero
    ip ssh time-out 120
    ip ssh authentication-retries 3
    spanning-tree mode pvst
    no spanning-tree optimize bpdu transmission
    spanning-tree extend system-id
    interface FastEthernet0/1
     switchport mode trunk
    interface FastEthernet0/2
     switchport mode access
    interface FastEthernet0/3
     switchport mode access
    interface FastEthernet0/4
     switchport mode access
    interface FastEthernet0/5
     switchport mode access
    interface FastEthernet0/6
     switchport mode access
    interface FastEthernet0/7
     switchport mode access
    interface FastEthernet0/8
     switchport mode access
    interface FastEthernet0/9
     switchport mode access
    interface FastEthernet0/10
     switchport mode access
    interface FastEthernet0/11
     switchport mode access
    interface FastEthernet0/12
     switchport mode access
    interface FastEthernet0/13
     switchport mode access
    interface FastEthernet0/14
     switchport mode access
    interface FastEthernet0/15
     switchport mode access
    interface FastEthernet0/16
     switchport mode access
    interface FastEthernet0/17
     switchport mode access
    interface FastEthernet0/18
     switchport mode access
    interface FastEthernet0/19
     switchport mode access
    interface FastEthernet0/20
     switchport mode access
    interface FastEthernet0/21
     switchport mode access
    interface FastEthernet0/22
     switchport mode access
    interface FastEthernet0/23
     switchport mode access
    interface FastEthernet0/24
     switchport mode access
    interface Vlan1
     ip address 10.1.10.11 255.255.255.0
     no ip route-cache
    ip http server
    banner motd ^C ****** SWITCH 2 LOGIN ******
    banner motd ^C
    line con 0
     logging synchronous
     login
    line vty 0 4
     password vty
     login
    line vty 5 15
     password vty
     login
    end

  • Home sharing suddenly stopped working. All devices have home sharing enabled, all devices are using the same network but cant see each other

    I've gone through all the Googling and support forums I can handle.. They all tell me to the same things. I have done everything required and quite honestly Home Sharing was working for quite some time. So I don't think I changed anything.
    The only culprit I can think of is the wireless network. We had to call Comcast and reset our service, and they gave us a new modem. Our router is also new.
    Is there a setting in a router that lets multiple devices connect but blocks each of them to each other? That seems to be what's happening.
    Apple TV2 can see our connection no problem and can download trailers (downloading movies never works though!!!), we have two Macs and two iPhones and all are on our wireless and none can connect to one another using Home Sharing.
    Please help!! This is an odd one!!

    I believe this is true. Alas, I wrote this a while ago and the link is dead. I can't totally remember what the issue was.
    But, looking through the PDF for the Linksys e2000, searching for 'filter multicast' I see this:
    Filter Multicast The multicasting feature allows for multiple transmissions to specific recipients at the same time . If multicasting is permitted, then the Router will allow IP multicast packets to be forwarded to the appropriate computers . Select this option to enable the filter . This option is disabled by default.
    And in my settings it's been enabled. So maybe try that.
    Filter multicast is under Securtiy>Firewall after you log in as admin.
    Why it's disabled by default I do not know.
    Good luck! Hope this is the solution!! Apple should warn people of this feature conflict to Apple TV buyers.

  • I cant see old messages and calls when i use same ...

    please skype community help me.. i cant see conversations or incoming/outgoing calls when i use the same account on other phone.. please give me advice what to do.. 
    thank you so much..

    Hi there pinkbat112,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • Hi! I lost my Ipod and over 2 years ago and thought I could never get the 300 songs I paid for.  A friend says I can, I cant see to find out how.  I use a PC  Thank you

    Is there a way I can get the downloads I used to have with my Ipod?  I gave up hope and this was 2 years ago.  It was 300 tunes, so I would really like to get them if i can since I paid for them.  I have a PZC now.  Hope you can help!

    Downloading past purchases from iTunes

  • All of a sudden I cant load one of my favourites I have used for over two years

    I have used a site for about three years and it was saved to my favourites. Now it wont load, says it is taking too long to load and my browser timed out.. Never had this problem before. Tried everything I know.. Need help.

    http://www.miles-apart-chat.com/page4.html this is the website I now cant get into after two years.

  • Attn: KellyRay (and whatever other name you want to use)

    Sir,
    You have been making a complete fool of yourself. By starting a personal vendetta against me, you have completely missed me and have affected the members of the forums and the other moderators.
    I logged on today to find out that you have been busy making a nuisance of yourself, and there was nothing left for me to do.
    If you continue in this childish game, we will have no choice but you contact your manager at the FDA where you work and tell them what you are up to.
    I would prefer that you crawled back under the rock you came from and this ended right here, but if you want to continue, we can take this out to the real world.
    Richard

    Hi,
    Well I'm another person who can't help but comment. Though I did refrain from doing so last night when this all began. BTW, I am not a moderator!
    Firstly, I read your initial reaction to Richard's reply to your post, and I honestly can't see where your problem lies! Many, many members have been greeted with the same "Car" post and many other members have used similar comments as a playful "Dig" (me among them) to coax more information from members.
    Most (if not all) members realise that it is not malicious and take it in the spirit in which it is given, in fact I don't think I've seen another reaction like yours! To use an expression my daughter uses - Chill!
    If you'd read the stickies at the top of the forum then you wouldn't have made your first post, as it added no useful information (it lacked any detail) to the thread starter's question, it was in fact pointless! It was also not clear whether you posted to give information or receive it!
    BTW, you are not the only person around here who is either disabled or who has served their country in a war zone! I've drawn my own conclusions as to why you imparted the information as to your disabilty, and the fact you were a Gulf war veteran, but I consider myself too polite to comment further! Sorry mate, but I've been there, seen it, done it! (as have others here)!
    However, I don't feel the necessity (nor have I in the past) to give any details on this forum!  
    As for the following, I'm a little lost for words. For one thing, we are not all from the U.S or didn't you notice!
    Quote
    By the way, treating a federal employee is a federal offence and repeated threats of a known employee is a felony! I have reported your threats to the FBI, in all likelihood they will do nothing, but continued threats will! Also any attempt to access, backtrack, or modify in any way federal traffic is a felony.
    I think I will treat this with the contempt it deseves!
    Quote
    I have reported your threats to the FBI
    presumably, they'll act once they've stopped laughing!
    I'm assuming that the posts that you made here were indeed "Federal Traffic" and carried out in your capacity as a worker for the "Federal" government. You were specifically instructed to post here? At least this is what you seem to be suggesting!
    If not, then you seem to be backing your childish antics on this forum with a threat of intervention by the Federal Government (I could be wrong but that sounds like it may be illegal too) - Three words "Cloud Cuckoo Land"!      
    Kellyray: It seems to me that your time and efforts would be better served if you directed them toward other, more important injustices. I would hope that you would reconsider this "Vendetta" against this forum.
    It would seem to me, that you would selfishly deny the help given to many (thankful, and the vast majority are) users for your own misguided ends! Just remember, all forum members and moderators are volunteers! Any and all help is given free and is dependent on the willingness of members to help!  
    There are plenty of things in this world it is possible to get extremely upset about. I would suggest that this is not one of them! I for one, have better things to worry about!
    This post is the only comment I will be giving, I will not post again with regard to this matter!
    Unless of course anyone asks me nicely  
    Axel  

  • Why wont my add-on manager open so i can see which add ons i want to use,it just keeps saying connecting/loading

    i installed firefox 4 today but have been unable to add any add ons or extensions as when i click on add-ons it just keeps telling me connecting/loading after 15minutes of waiting for it to load i gave up.its no use me having firefox if this is going to be a feature

    You have to use iTunes. To get itunes to see the iPod see the following
    For a Mac
    iPod doesn't appear in iTunes or on the Mac desktop.
    for Widows:
    http://support.apple.com/kb/TS1369

  • HT201407 i have a old iphone 4 i want to use for games only but my apple id and password is gone i cant find it i have tryed several times and cant get in to phone what can  i do

    i have iphone 4 I wantr to use just for games but I don't have my password or apple id for phone how do I fully restore it

    You go to https://iforgot.apple.com/appleid if you don't remember the ID.
    If you know the ID but not the password, you go to https://iforgot.apple.com and reset it.
    If you can't do either of those, you call Apple and speak to someone in account security.

  • Family share isn't working - we set it up and it was working fine for a few weeks then in the last few days it's stopped, we can't see the other members in our family share and it says we aren't set up but it doesn't allow us to confirm and reset up

    Help!  We set up family share a few weeks ago, and it was working fine with the organizer and two additional members.  The three of us could see each other on app and iTunes stores and could view each other's purchased items.  Then ... All of that disappeared.  We cant see each other's profiles any more and we definitely can't view any purchased items.  In addition, when we try to go in and jump start by downloading a free app or logging out and back of itunes, nothing works.  It seems to show we have family sharing in the iCloud settings, and when we click the Apple ID it asks us to confirm, and we confirm, and are asked if we want to change accounts because then we trigger the 90 day freeze period.  And we aren't changing any accounts - just trying to confirm the same accounts to get family share to work!  We are all on the same ios 8.1.3 and os, so I don't know what else to try! 

    No, I am a media professional who uses his MacBook Pro to connect to external monitors, and needs to continue to do so.  I don't want Apple TV.  I want my laptop to work again, like it's supposed to.  Like it used to. 
    I have a demonstration this week at work that requires me to plug into an LCD screen and I am hoping to have this resolved by then.  I am trying to convince my department to buy a Retina Mac and thousands of dollars worth of video software for live shows, and if I can't make it work, then I can't exactly convince them (or myself) to buy what I have been researching.
    Again, I don't want wireless video or Apple TV.  I don't want to buy any more stuff.  I want to know why my Thunderbolt to HDMI cable stopped working after my update, and how to fix it...preferably before this meeting. 

  • Apple TV 2 (2010) Wi-Fi Range/Problems - cant see my network!!

    Hi - dont know if this is a general problem or not, but cant see any other posts on it anywhere!!!
    I have recently set up a new ATV2 in our bedroom. When originally setting up, it found my network no problem. I even use my ipad in our bedroom and it works fine (and thats saying something!).
    Anyway, apple tv set up fine. Rented a few movies ('Frozen' sucked big time!) and was happy. However, it now wont see my network for some random reason!
    I have a BT home hub 2 (I know everyone says they are crappy, but it has worked fine so far!). Whats more annoying is that everything else still connects apart from the ATV2!
    I have tried restarting everything and also tried turning of xbox and ALL other electrical devices in our house - but it still can't sind the network!
    Anyone got any ideas aside from me sending it back to Apple??
    THANKS!!

    confusedgenius wrote:
    I have a BT home hub 2 ... Anyone got any ideas
    if the BT has a spare ethernet port, you could connect ATV2 to it by way of *powerline adapters* _*such as these*_. that should would eliminate any possible interference from other wirelessless devices etc.
    JGG

  • My itunes screen is black and i cant see the writing how do i change the colour

    My itunes screen is black when im trying to find music - how do i change the colour as i cant see the writing

    With that one, perhaps try Drgoo's suggestion from the following post:
    Re: Itunes Store - ALL Text Black/Cant See Anything

Maybe you are looking for

  • Printing the Resource Profile in the Tracking View

    As above. Struggling to print the profile section of the Tracking View - there's a checkbox to print the profile, but it's greyed out. Any suggestions - or a "it's not possible" - appreciated Versiobn 6.2.1 - SP 3 David

  • Item category N: Only base unit of measure EA allowed,Message no. CO344

    Dear all I am facing  the following  issue, Item category N: Only base unit of measure EA allowed Message no. CO344 Diagnosis You have entered a unit of measure for a component of the item category N which does not correspond to the base unit of meas

  • Why pdf document do not "open" in Safari?

    I click on a link in Safari in order to open a pdf document but I just get a "back window"...I can however save the pdf document and open it later biut not by clicking on the link the web page in Safari. Can someone give me some hints? Many thanks.

  • DDL in stored procedures: why not?

    Hi all... I am an Oracle beginner and am using 8i to return data from oracle to ASP pages via ADO and ODBC. I created the necessary packages in my Oracle tablespace and they contained DDL - I have a very complex query which I don't want to have to en

  • Migration of contracts

    Hello Experts, I am trying to develop a legacy data migration plan for Contracts with periodic billing plan and revenue recognition. Example of the scenario is given below: Customer signed a contract for one year starting 01/01/xxxx. Customer is bill