[Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

So I tried to update my bios on my Neo 7030. I was having issues with my sata drives not being detected. I thought I would give it a try. The windows udpate gave me an error so I tried the Dos version. I left the update going overnight to wake to the same screen. So I restarted the computer and now I get a Bad Check Sum error and the system shutsdown. I have cleared the cmos, taken the battery out, disharged left over power, etc. Is my mobo dead? I bought it sept 04. The bios was the 05-11-11 build in live update.

Sometimes bios recovery is a long shot .
But the award bios v.6 is supposed to be able to do it if the bootblock is still intact.
Best way seems to be to strip it down to minimal configuration , disconnect all drives except floppy , one ram module , perhaps without video card also .
Look here :
http://pages.sbcglobal.net/jefn/bootblock.html

Similar Messages

MOVED: [Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

Sometimes bios recovery is a long shot .
But the award bios v.6 is supposed to be able to do it if the bootblock is still intact.
Best way seems to be to strip it down to minimal configuration , disconnect all drives except floppy , one ram module , perhaps without video card also .
Look here :
http://pages.sbcglobal.net/jefn/bootblock.html

Airport Utility `install failed' error with both 6.0 and 6.1

Hi folks
I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
Any ideas or suggestions please?
Thanks in advance.

Welcome to Apple Communities
Backup your files and try this:
1. Reboot from recovery partition (or as in my case USB recovery drive)
2. Select Re-install Mac OS X
3. Allow the process to run through multiple restarts
4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
5. Run all updates saving the Airport Utility 6.0 until last.
6. Install the airport utility from software update.

TS3217 Wher's my water has stopped working. We have both the free and paid versions on the IPAD2 and the paid version stopped working suddenly. I updated both the free and paid versions and the IOS and it still does not work(the free version works).

Where's my water suddenly stopped working. We have both the free and paid version installed and the free one works. The paid version fails during initilazation. Bothe have been updated from Itunes and the IPAD was rebooted. My wife playes it every day and yesterday it failed to run, any suggestions?

Are they apps?
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod/iPad
BTW this is the iPod touch forum

SCUP - Deploy Updates for both Windows 7 and Windows 8.1 rules Detection

Hi all,
I encounter a little issue regarding the update deployment from SCUP.
For example, I would like to deploy Firefox updates on both Windows 7 and Windows 8.1. Firefox Updates are deployed and installed on Windows 7 without any problem. But Nothing happen on Windows 8.1.
I think my problem is on my Installable Rule I have created. As it's not possible to select Windows 8.1 as a condiftion (like Windows 7) I have created a WMI query.
Before using a WMI query, I tried to use Major version and Minor version without success.
Does anyone has already used this sort of scenario ?

Shouldn't you do the following things (see also:
http://technet.microsoft.com/en-us/library/hh134743.aspx):
Add Windows Language is French to the top AND;
Change the second AND to an OR;
Add the WMI Query to the new OR (so it's at the same level as the
Windows Version = Windows 7 SP1);
Remove the last OR (as it's not being used anymore).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

After updating with Nokia Software Updater my E66 ...

After updating with Nokia Software Updater my E66 asks for Lock code. Please any body help me

If you are only interested in maps.. download the installer from here ...Click on 'Download' under Instructions and then again 'Download' ..

My program updated with 11.05.05 and it is not available on your site is this correct?

My program updated with 11.05.05 and it is not available on your site is this correct?

What do you mean "not available on their website"?
Of course it is: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5674

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

Can I use my iPod with BOTH a Mac and PC???

Might be an odd question and forgive me if it is an obvious answer. I just got a 30 gigger and connnected it up and charged it with my Mac mini at home last night. I have lots of music on my iTunes on my home Mac mini and I have some music on my work Dell Laptop(with iTunes). What would be the best way to sync up my two iTunes libraries (one on my Mac, the other on the Dell lapper) to the iPod, or is it even possible to use it interchangeably with both the Mac and PC??

Yes, you can.
Read through the following article, and make sure your iPod is Windows-formatted using the iPod Updater utility on Windows.
http://docs.info.apple.com/article.html?artnum=61675

Creating BusinessPartner with both mail to and bill to address

Hi,
I am having problem creating a business partner with both mail to and bill to address. I want to create two instances (lines) in BPAddresses; one with mial to address and another with bioll to address. But I still get the error code -5002 with the message "Address is empty [OCRD: CardCode} line:1"
Below is my code in C#:
SAPbobsCOM.BusinessPartners bp = (SAPbobsCOM.BusinessPartners) conn.InternalConnection.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oBusinessPartners);
               bp.CardName = "Test Tester";
               bp.CardType = SAPbobsCOM.BoCardTypes.cCustomer;
               bp.CardCode = "TEST29";
               bp.Address = "1305 Blue Raven Blvd";
               bp.City = "Citrus Height";
               bp.Country = "US";
               bp.BillToState = "CA";
               bp.ContactPerson = "Peter Snicker";
               bp.Currency = "USD";
               bp.ZipCode ="94521";
               string errMsg;
               int errCode;
               int returnval = bp.Add();
               if(0 != returnval){
                    conn.InternalConnection.GetLastError(out errCode, out errMsg);
                    Console.WriteLine(errMsg);
                    return;
               string cardCode;
               conn.InternalConnection.GetNewObjectCode(out cardCode);
               //Console.WriteLine("Added BP successfully",cardCode);
               bp.GetByKey(cardCode);
               bp.Addresses.Add();
               bp.Addresses.SetCurrentLine(1);
               bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_ShipTo;
               returnval = bp.Update();
               if(0 != returnval){
                    conn.InternalConnection.GetLastError(out errCode, out errMsg);
                    Console.WriteLine(errMsg);
                    return;
I would appreciate if anyone can help me with this problem.
Thank you in advance,
Sunny

Hi Sunny,
The reason for your error is that you're trying to add a blank ship to address.
bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_ShipTo;
returnval = bp.Update();
you are just specifying a type and then trying to update. If you want to add another line, you have to set some properties, like:
bp.Addresses.AddressType = SAPbobsCOM.BoAddressType.bo_ShipTo;
bp.Addresses.AddressName = "My Address";
etc...
etc...
returnval = bp.Update();
Hope it helps,
Adele

Could a 2012 macbook pro from the factory been loaded by the factory with both Snow Leopard AND OSX Lion?

could a 2012 macbook pro from the factory been loaded by the factory with both Snow Leopard AND OSX Lion?

I think MBPs stopped coming with Snow Leopard installed as of the late-2011 models. That's when OS X Lion started being pre-installed on MBPs. Some earlier MBP models (2010, early-2011) had a firmware update to allow Internet Recovery (command+option+r) which would allow a reinstall of OS X Lion (purchased from the App Store) with the purchaser's AppleID/password.
I don't believe SL would even install on a 2012 MBP.

Updated OS 10.9.4 and AE Version 11.0.4 and this is what the message reads on launch. Last log message was: 140735170798352 GPUManager 2 Sniffer Result Code: 3

Updated OS 10.9.4 and AE Version 11.0.4 and this is what the message reads on launch. Last log message was: <140735170798352> <GPUManager> <2> Sniffer Result Code: 3
What do I need to do to get this working again?
After Effects@

fixing permissions problem that impedes start of Adobe applications
Also, Avoid installing NVIDIA CUDA drivers on computers with AMD GPUs

Please help me as.. i got an update of 10.7.5 and current version is os x lion 10.7.3

i got an update of 10.7.5 and current version is os x lion 10.7.3 as i always do to update it and at the end it says the update is tampered
please help me

You could try restarting into the Lion Recovery HD by pressing/holding the Command+R keys until you see the Apple logo. From the OS X Utilities Menu, select Reinstall Mac OS X which will download/reinstall Lion, but it will be the most current version of Lion (10.7.5). The install will not harm your data or apps. It just reinstalls the OS. Once the install finishes, run Software Update to bring your system current.
Back up your system before doing any of the above!
One Question: Are you sure you're running Lion 10.7.3 and not Mountain Lion 10.8.3? Because your original post shows you're running Lion 10.7.5.

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines are not the up to date versions I had.

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines/sequences are not the up to date versions I had. I saved different version of this project for various purposes, but they were all named differently(i.e joe and mary wedding, joe and mary wedding 2, joe and mary wedding 3, joe and mary wedding 3.1). I do not know if they just pulled the timelines from the earliest version, eradicated the data entirely, or something else.
Since the program prompts me to create and save a new version for the updated premier, I still have the previous projects, but cannot open them. I imagine they are unchanged, but cannot be sure.
Thoughts? Is it possible to uninstall an update re-install it later?
Please advise.
Thank you.
Brian

Also...
Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

[Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

Similar Messages

Maybe you are looking for