[Athlon64] Have problems the bios version 5 for K8T Neo-V
Sorry for my very bad english, the spanish is my native language.
I buy a a MSI K8T Neo-V motherboard with a CPU Sempron 2800+ Rev E6 (64bits).
this motherborad have the bios version 1.1 and showme CPU Unknow.
I update the bios to version 5 and now the Cpu Info is Showme Correctly.
but 2 problems begins.
*****IMPORTANT ERRROR
1.- At try Shutdowns the pc (in windows set Start\Shutdows\Shutdown) the pc is reset and not off.
(If I have in windows XP and press the button off the pc is reset/I try in linux and the same, the pc is not off, only reset) :-(
only what th pc is not in windows (at begins) the button off works Ok.
2.- In the Bios The Temperature Info ( Cpu and System ) is show swap.
3.- I use a Sound Card Cmedia, this card have pc game port. but the Pc/Administrator/Device Show
2 pc game port (1-motherboard/1-SoundCard) and the 1º iks show with yellow mark. :-(
please send me a bios update.
salu2
carlos vargas
Do a floppy drive flash with the correct switches. Go back to the last bios that worked properly or try Pinochio's bios which a lot of people like. Liveupdate will mess up your bios. So can winflash if you do not use it correctly.
https://forum-en.msi.com/index.php?topic=81017.0
https://forum-en.msi.com/index.php?topic=86257.msg617198#msg617198
After you have read about it, do this using the correct flash utilty file name and the correct bios file name
"DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
Good luck.
Similar Messages
-
i have install the GM version for my iPod Touch,did i need to do anything to change to public version? restore or else?
Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.
-
Best bios settings for K8T Neo + Athlon 64 3200+ + ATI 9700 Pro ?
Hi, i just got my k8T Neo (MS-6702) and can't figure out the best/most stable settings in the bios for my system yet. I am mainly using my computer for GAMES, so this is what i am talking about when i say "optimization"
I got an ATI 9700 Pro, an Athlon 64 3200+ and 2x512 mb of Kingston Value Ram (bank 1 and 2).
The main settings i really don't know how to set are:
-Internal Cache
-External Cache
-System Bios Cacheable
-C000, 32k Shadow
-MPS Revision
-AGP Fastwrite
-AGP Aperture Size
I wish i could get rid of any instability problems, i had a few crashes so far. Yet, i would like to set my system to get the most of my hardware in terms of speed.
Thanks in advance for your help guys !internal cache-on
external cache-on
system bios-disabe
c shadow stuff-disable
agp fastwrite on unless you have problems, you'll know fast
agp apperature size..depends on sys ram if over 512 best to atleast 128, if not 256
(official recomadation is 1/2 your system ram)
disable any onboard stuff you dont use like sound,sata controlers,
quick boot enable. smart enable
logo disable, floppy drive seek disable,
i wouldnt mess with mps table version.
power management to s3 usb wake enable..power management agm-disable
suspend time-disable-...set wakeup events hit enter, choose kbc & or mouse.
that should get you started. -
Old BIOS version for 945PL Neo (MS-7236 v2.x)
Older BIOS files for this board 945PL Neo are not available for download on the website, it's all done through the updater program. When the bios is upgraded it does not save the old bios for backup, I found out.
I need to downgrade the BIOS to the board's shipping version. I unfortunately updated the BIOS to I think it was 5.2 and I need version 5.0. Upgrading the BIOS screwed up a license key for an application I'm running. I couldn't have planned a better disaster.
Anyone?
Thank you.
EDIT: i see now
Quote
DOS sound: This driver supports DOS sound for VIA VT82C686A/VT82C686B/VT8231 southbridges only. The VIAAUDIO.COM file mentioned in the Readme concerning DOS sound can be obtained from this old audio driver package. It is no longer supplied in the Vinyl_AudioCodec driver package. -
I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
Best regards,
MicheleContact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
i have tried to upgrade to the latest version of i tunes. I have been unable to do so as when it gets 2 thirds of the way through the installation a message appears saying that i have lost the installation source for apple software update any ideas of how to get this back and install itunes again?
A second generation iPod touch can't be updated past 4.2.1.
(86969) -
Which is the latest BIOS version for Satellite L30-113 (PSL 33)?
Hi everyone,
Could someone please tell me which is the letest BIOS version for my laptop since I have never upgarde it?
Also how do I install it and how do I check what is my bios version now?
Thank you in advanceFirst of all the BIOS update is not necessary if your notebook functions correctly.
But back to your questions;
On the Toshiba European driver page you will find all available drivers and also the newest available BIOS. At this time it seems to be a 3.10-WIN version
How to find out the BIOS version?
This is very easy you have to access the BIOS and then you could see the BIOS version.
To access the BIOS you have to press the F2 button immediately after notebook was started.
Ciao -
In adobe premiere cc 2014 , in the version for Apple , there is the " dynamics" in the audiometer / amplitude and compression/dynamics. In the same version for PC , there is no option. Somebody is also having this problem ? tks
are you referring to the audio meters panel? im on windows, and i can right click the meters panel and get options for "dynamic peaks". there are audio effects, from the effects panel if thats what you are looking for? i have one named "Dynamics" as well as several compressors.
-
I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!
Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
I have deleted iPhoto from my MacBook Air. When I try to reinstall it, itunes tries to charge me. Is there a way to reinstall the old version for free?
depening on what OS you're running you should be able to reinstall it without charge since it's part of the operating system. if running 10.6.8 or earlier you will need to use the applications install disc if there is one or if you only have one disc you can put it in and do a reinstall of the OS which will put the iphoto back on. if running 10.7 or 10.8 can sign into the app store w/ the same apple id that is associated w/ the mac and it should show in your purchases for you to reinstall it. you may need to click on the accept button if it appears next to the iphoto in your purchase listing.
-
Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information. -
My Computer is not sensing my ipod touch 4G...i have dowloaded the latest version of itunes (10.2.2) for my windows 7 64 bit edition...somebody help me
http://support.apple.com/kb/ts1567
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
I subscribed to Adobe Acrobat Pro XI. I have the trial version for another 3 days. The e-mail confirming the subscription said to install it, but I already have the trial version. Do I have to install it again?
Hello,
No, you don't need to re-install the Acrobat again. Just license it when the next time trial prompt appears. The moment you put your email on which you have purchased the subscription, it will get activated.
Regards,
Anoop -
adobe keeps crashing, you can be on a web page reading and the browser opens the page in a new browser. I did not have this problem the older versions. What can I do to fix this problem.
See [[Firefox keeps opening many tabs or windows]]
-
i have a pc and am using the trial version for now. I have readabout and seen on other computers, but no matter where i look or follow the dirrections i can not find the mini bridge what am i doing wrong. thank you
CC and CC2014 are the current versions of Photoshop. CC stands for Creative Cloud.
That being cleared up, a respectful request:
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.
Maybe you are looking for
-
I've made sure a dozen times that my home page is set correctly, and when I hit the home button next to the search bar it works and takes me right to google BUT whenever i open a new tab i get the error that my page cannot load and the web url that i
-
Hi guys, before Mountain Lion came out, I had my Mac Book Pro mid 2010, nicely connected to my DENON AVR-1912 amplifier through HDMI. The Amplifier would send the signal to the TV and manage the Audio as well. Since Mountain Lion came out, I could no
-
ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!
Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
-
How to set the PATH in Terminal?
As a newbie to Bash and the Terminal, in connection with installing a new version of Ruby and various add-ons, I have been messing around with changing the PATH via various methods I've found on the internet, and trying to add a new directory to my P
-
One chart instead of two - CR XIr2
Post Author: olesco CA Forum: Charts and Graphs I am trying to put 1 chart instead of 2 charts but Iu2019m getting an error u201CThe data you have selected does not fit the chart type Explanation: This chart type requires 2 u201COn Change of fi