[Athlon64] K8MM-V - Memory Size
Hi,
I have a K8MM-V with a AMD Samperon 64bit (3000+) CPU and am wondering about the max memory size for it.
The website says that it handles 2GB of DDR400. I have 2x1GB DDR400 chips and the BIOS only sees 1.5GB as does Windows.
The memory have Samsung chips and are of the same time. What is wrong? Or did I not set something correctly?
Bios is at ver1.3. The memory is set to AUTO. So I am not sure what is going on
Memory banks, You know you can get double sided memory modules.
So if you installed a double sided module you could not use dimm slot 2.
Each dimm slot has 2 memory address lines so you can access both sides at the same time and use double sided modules.
So
dimm slot 1 = bank 0 and Bank 1
dimm slot 2 = bank 2 and Bank 3
dimm slot 3 = bank 4 and Bank 5
Since there are over hundreds types of memory modules and they are using different type of DRAMs to build them, it is very possible that you have purchased a (cheap) memory module which is not compatible with your computer.
For example, there might be 3-4 different types of 128MB memory modules and some computers are very picky and can only support 1 type or 2 types of 128MB memory modules. If it is incompatible, then usually you will not be able to boot up your system or you will see frozen screen or system might only recognize half of the memory size. This issue adresses to very low compatibility, because memory maker use several configuration.
Maybe you can try setting memory to "SPD"
Edit here: try using only one stick at a time, if they are reconized alone as 1 GB the problem will remain in the very low compatibility issue, and maybe you want to buy some others ram stick from another chip maker, maybe Geil, or Corsair.
Similar Messages
-
How to Increase the memory size of a File in the Application Server
Hello Abaper's
I have generated a XML file for the data of internal table (with 10 Records). When i download , i can see the XML file for the Entire 10 Records.
But , while transferring the XML file to Applicationserver , it's transferring only upto max 4 Records.I assume that the memory is insufficient to allocate 10 Records. Can we Increase the Memory size of the File on Application server. OR, is there any error in My Source Code.
Code i used to Transfer the XML File to Application server.
OPEN DATASET FNAME FOR OUTPUT IN BINARY MODE.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
TRANSFER wa_xmltab TO FNAME.
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
Regards
JvHi,
DATA : filename TYPE rlgrap-filename.
DATA : doc_name TYPE char30.
DATA : bin_size TYPE i.
SELECT matnr matkl meins
FROM mara INTO TABLE it_mara
UP TO 10 ROWS.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
i_filename = filename
i_xml_doc_name = doc_name
IMPORTING
pe_bin_filesize = bin_size
TABLES
i_tab_sap_data = it_mara " contains 10 Records
CHANGING
i_tab_converted_data = it_xmltab.
placing XML File in Appl. Server
DATA : FNAME(60) VALUE 'xyz_File'.
DATA : num TYPE i.
DATA : xmldata(256) TYPE x.
For Writing The data in Application Server
OPEN DATASET FNAME FOR OUTPUT IN BINARY MODE. " ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
TRANSFER wa_xmltab TO FNAME.
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
For Reading The data in Application Server
OPEN DATASET FNAME FOR INPUT IN BINARY MODE. " ENCODING DEFAULT.
DO.
IF sy-subrc EQ 0.
READ DATASET fname INTO xmldata.
WRITE :/ xmldata.
Clear xmldata.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET FNAME.
at runtime i can see
it_mara --> contain 10 records
it_xmltab --> contain 7 lines (Each line size is 255 char). This table have XML format data, (unknow format , with all numeric
digits)
it_xmltab is trasferred to application server , but the xml format is generated upto 4 records, and for the remaining records
the XML format is not generated.
the XML data in application server file is
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
Regards
JV -
Jdbc sender channel memory size issue
Hi Experts,
We are facing the below error in connect to jdbc sender channel from XI . Could anyone of you suggest me the right action to be taken in this regard.
Database-level error reported by JDBC driver while executing statement 'select * from*********where posted = '0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The system is out of memory. Use server side cursors for large result sets:Java heap space. Result set size:614,143,127. JVM total memory size:1,031,798,784.'. For details, contact your database server vendor.
Appreciate your quick help.
Thanks & Regards,
Ranganath.Regulate the number of records returned by Select statement for permanent fix.
Few more things....
a)If you want to select only some fields, then dont use Select * from table. Rather specify select a,b,c from tablename
b) specify some flag in the table so that read some records each time and in the update statement update the flag for those records already read. So that you will not reread the same records in the next message.
Hope you understand.
c) Increasing java heap size is temporary fix. -
Is it possible to config memory size for a process?
Dear experts,
I would like to control the memory size assigned for a process on Solaris 9. Can i config memory size assigned for process??
Many thanks,
ShunYou can use ulimit/limit to assign a bound on the amount of space that a process and its children can allocate.
I'm not sure if that's what you're asking though.
Darren -
How to set memory size for JRE
hi all,
Is there anyone know how to set the JRE memory size?
My run my applet application onto browser and I want to increase to size of memory. Such as -ms 128m -mx256m.
please help.
regards,
elvisThe suggestion could be convert applet into WebStart application which is quite similar to applet (at least
it is distributed similar way, resides within sandbox etc) but allows to specify memory size as you requested. -
How to get free memory size of a card with javax.smartcardio
Hi,
How can I find how much memory of a card is free with javax.smartcardio?
Please your advice.
Thank in advance.gizmo wrote:
I wanted to read the free memory size with a card reader and javax.smartcardio.
Is it possible to send a APDU Command to select the root 3F00 and read the properties?There is no built-in smartcardio funationality to do this. What you can do is send an APDU and get the memory by calling the code mentioned already. -
Maximum Memory Size & Memory Size
Will a server's memory automatically increase from Memory Size to Maximum Memory Size as the VM requires it? Or is this only valid for adding memory to the Memory Size value manually?
keithrust wrote:
Will a server's memory automatically increase from Memory Size to Maximum Memory Size as the VM requires it? Or is this only valid for adding memory to the Memory Size value manually?No, there is no automatic increase in memory. The max memory size just specifies the maximum amount to which you can manually adjust the memory of a running VM. I've now taken to setting the max memory size to the total available memory on my Oracle VM Servers, with memory size set to something reasonable. This way, I can adjust right up to the limit of physical memory without rebooting. -
Increasing JVM memory size at runtime
I want to increase the JVM memory size at runtime.
I found out that I can do this with oracle.aurora.vm.OracleRuntime.setMaxMemorySize(...)
Which JAR do I have to put on the classpath to be able to acces OracleRuntime???
What would be the proper implementation to incerase the memory size?aurora.zip
-
Software distribution error with LMS 3.2 regarding flash/memory size
Hello,
I'm accustomed to LMS raising warnings about memory size not being enough when in fact there is enough space (eg : there is 256mb, IOS requires 256mb, but LMS calculates 255.234mb, and says there is not enough memory). I've encoutered that situation many times with LMS 3.1 and just learned to ignore it.
But since I've upgraded to LMS 3.2, we are now getting _errors_ which are preventing us from deploying the IOS, even though there is still enough memory and flash space. I've read in another thread about bug CSCsu49349 but this one should be fixed in LMS 3.2, so I am at lost.
I always download my IOSes from Cisco.com using LMS so that the proper fields are populated.
Here is one sample : I was trying to deploy an IOS to a 2821 router. The IOS weighs 29Mb in reality and I have around 31Mb of free flash, and the whole flash is 64Mb, but I get a catastrophic error. Also note the contradictory warning about the memory size :
Warning - SWIM1065: Minimum RAM requirement of the selected image: 256 MB .
RAM available on the device ( 256 MB) May not be enough to activate the selected image.
Increase the RAM size for the device, select a different image for upgrading, or
specify the RAM size for the image by editing the attributes of the image stored in the software repository.
Warning - SWIM1070: Feature subset of the Active image could not be determined.
Catastrophic - SWIM1200:Selected Flash partition requires minimum (64 MB) to upgrade selected software/image.
Select a different Flash partition for upgrading the image.
Do I need to modify the flash requirement on the image to get around this, or is there a patch available for LMS 3.2 ?
Thanks for the advice,
Alex.Hello,
After running another inventory to make sure, I get the same error. Here are the steps of the distribution process (we can see I have enough room for the IOS, barely, but still enough) :
Afterwards I get the failed message :
And the same error message :
Thanks for the help!
Alex. -
How to calculate OS memory size in java?
I want to calculate free memory size , when I tried by Runtime class
like this Runtime.getRuntime().freeMemory() it gives JVS free memory size
But I want OS free memory size
If anybody know then plz reply me ASAPSince the question was asked the last time (yesterday afternoon), I don't think Java has changed much, so the answer is still: you can't do it with Java.
-
Hi,URGENT--Memory size of binary Increasing due to multithreading in Pro*C
I got stuck in Multhithreading in PRO*C.
Memory size of my binary keeps on increasing.
Flow is like this.
My main thread spawns multiple threads of two types of threads. Both types of threads connect to different dbs.
In other words, i need to have multiple connections with to different db's i.e. configure multiple threads for same.
For this i take sql context variable in each thread and pass it to connect_to_db func. for connection. Then that thread use corresponding sql context variable for pl/sql function( CHANGE_INPUT) call.
This keeps of memory size of my binary inceasing.
In above code T_ABILLITY_INPUT is of object type whose ott converted header and out type file is already included.
CHANGE_INPUT is pls/sql function
Can any help me out in using multithreading in pro*c.
It's very-very URGENT, This is creating problem in live site.
Thaks in Advance
Code for process and connect_to_db function is same for both types of threads different is in object types to get process
sample code of connect_to_db
int connect_to_db(char username, char password, char dbname,sql_context ctx,char *ErrorMessage)
int ret;
char ConnString[50] = {0,};
sprintf(ConnString, "%s@%s", username, dbname);
EXEC SQL WHENEVER SQLERROR DO sql_error("ORACLE error--", ErrorMessage);
EXEC SQL ENABLE THREADS;
EXEC SQL CONTEXT ALLOCATE :*ctx;
EXEC SQL CONTEXT USE :*ctx;
EXEC SQL CONNECT :ConnString IDENTIFIED BY :password;
if(sqlca.sqlcode < 0)
return -1;
return 0;
sample code for pl/sql function call
int process(double num,char Flag,char dbName,char dbExtApp,char dbExtUname,char *
dbExtRef,sql_context ctx, char *err)
T_ABILLITY_INPUT *typAbilityInputObj;
T_ABILLITY_INPUT_ind *typAbilityInputObj_ind;
T_ABILLITY_INPUT *typAbilityInputObj2;
T_ABILLITY_INPUT_ind *typAbilityInputObj2_ind;
//declaration of some host variables
int iretVal=0;
char extUser[255];
char extApp[255];
char extRef[30];
char us[ABREF_LENGTH];
char app[ABREF_LENGTH];
char ref[ABREF_LENGTH];
memset(extUser,'\0',sizeof(extUser));
memset(extApp,'\0',sizeof(extApp));
memset(extRef,'\0',sizeof(extRef));
memset(us,'\0',ABREF_LENGTH);
memset(app,'\0',ABREF_LENGTH);
memset(ref,'\0',ABREF_LENGTH);
EXEC SQL CONTEXT USE :ctx;
EXEC SQL OBJECT CREATE :typAbilityInputObj:typAbilityInputObj_ind;
EXEC SQL OBJECT CREATE :typAbilityInputObj2:typAbilityInputObj2_ind;
EXEC SQL OBJECT SET EXTERNAL_USER,EXTERNAL_APPLICATION,EXTERNAL_REFERENCE OF : typAbili
tyInputObj TO :extUser, :extApp, :extRef;
EXEC SQL CALL CHANGE_INPUT(:typAbilityInputObj,:typAbilityInputObj2) into iretVal;
EXEC SQL OBJECT GET EXTERNAL_USER,EXTERNAL_APPLICATION,EXTERNAL_REFERENCE FROM :typAbil
ityInputObj2 INTO :us, :app, :ref;
EXEC SQL OBJECT UPDATE :typAbilityInputObj;
EXEC SQL OBJECT UPDATE :typAbilityInputObj2;
EXEC SQL OBJECT RELEASE :typAbilityInputObj;
EXEC SQL OBJECT RELEASE :typAbilityInputObj2;
EXEC SQL OBJECT DELETE :typAbilityInputObj;
EXEC SQL OBJECT DELETE :typAbilityInputObj2;
EXEC SQL COMMIT;
EXEC SQL OBJECT CACHE FREE ALL;
}This must be my last last thing. AHT was on an iMac I bought in 2009. It was included on my "disk 2" along with several other applications. When I wiped and installed the full Lion, AHT was gone. Same is true for the full Mountain Lion installation media. It does not have AHT. I'm not at all sure how to get it back from Apple.
I was able to find it on my SL disc 2 and extract it again from that. Disc 2 won't install on Mountain Lion (the packages are too out of date) but the AHT pkg does.
Since you have it, consider packing it up and keeping it safe. Maybe someone who knows AHT better than I can elaborate on AHT. From what I've seen, you get it when your mac ships but if you ever wipe and reinstall the OS, you lose it. -
High resident memory size when creating in-memory db
Capsule summary: an in-memory db created with a cache size of 8 Gb reports a resident size of 2 Gb without any data stored in it.
Details:
We have a need for creating an entirely "in-memory" database, i.e. without a backing file store.The application in question will be writing to and reading from the db frequently, and there is no need to incur the penalty of writing out to disk.
I read the white paper "Writing In-Memory Applications" published by Oracle, and modified our db creation code accordingly. More or less all I did was to allow "open" to be called with a NULL instead of file name.
This seems to work just fine, in that no file is created, and both writing and querying seem to work correctly. However, the resident memory size, even without anything written to the database, seems inordinately high. For example, if I set the cache size to be 8 Gb (the size of physical memory on my Linux FC11 machine), the resident size reported by "top" is 2.0 Gb:
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 98.3%id, 0.6%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 8114752k total, 8054072k used, 60680k free, 45344k buffers
Swap: 11717624k total, 204896k used, 11512728k free, 3977788k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
12827 rao 20 0 2243m 2.0g 9.9m S 0.0 26.0 0:01.53 pypix
Running strace on the process shows that there are three calls to mmap as soon as "open" is called, one of them being responsible for a majority of the allocation.
Is this expected behavior? The documentation explicitly states the following:
"... Note that the size you specify for your cache is actually a maximum size; DB will only use memory as required so if you specify a cache size of 1 GB but your data set is only ever 10 MB in size, then 10 MB is what the DB will use...."
This does not appear to be consistent with what I am seeing.
Any ideas on what I might be doing wrong?
Thanks in advance.Have you checked what script is causing the issue ? anything from application ? and OLAP things running on this instance ? how many sql instances are running ? anyother application like sharepoint etc runinning on this host ?
Check If your SQL Server instance encounters the following conditions then there is a possibility of
Non-yielding scheduler (SQL Server 2005 and above for the first occurrence. This is equivalent to a 17883 dump in SQL Server 2000.)
Non-yielding resource monitor (SQL server 2005 and above for the first occurrence)
Non-yielding IOCP listener (SQL server 2005 and above for the first occurrence)
Deadlocked Schedulers (SQL server 2005 and above. This is equivalent to a 17884 in SQL Server 2000.)
Exceptions/Assertions
Database Corruption
Latch Timeout
Other conditions (eg: when DUMPTRIGGER is used to generate a dump for a particular exception)
http://www.sqlskills.com/BLOGS/PAUL/post/How-to-download-a-sqlservrpdb-symbol-file.aspx
http://support.microsoft.com/kb/311503
http://blogs.msdn.com/b/sqlcat/archive/2009/09/11/looking-deeper-into-sql-server-using-minidumps.aspx
Diagnose and Correct Errors 17883, 17884, 17887, and 17888
http://technet.microsoft.com/en-us/library/cc917684.aspx
Raju Rasagounder Sr MSSQL DBA -
Large Memory Size (:O )
i created an application that uses 35 MB of memory using the fianal release J2SE 1.4.0
i'm using swing & JAXP "DOM" to parse and save
a 25KB xml file.
my question is:
how can i analyze the memory of my program, in terms of JVM & Application & Objects of Application(swing, JAXP, EJB......), to focus on one part
of it, to reduce the memory size, or at least
know if it is the dcesion of JVM to allocate that memory size.
any suggesstions, articles, URLs will really help
thanks.i have the same condition also but i found those results:
a. JVM takes about 10 MB of memory.
b. GUI swing about 5-8 MB
c. JAXP takes about 15-20 MB of memory for a 30 KB XML file
which nearly causes a total consumed memory of 25-30 MB of memory. weard results, right.
b.r
mnmmm -
i created an application that uses 35 MB of memory using the fianal release J2SE 1.4.0
i'm using swing & JAXP "DOM" to parse and save
a 25KB xml file.
my question is:
how can i analyze the memory of my program, in terms of JVM & Application & Objects of Application(swing, JAXP, EJB......), to focus on one part
of it, to reduce the memory size, or at least
know if it is the dcesion of JVM to allocate that memory size.
any suggesstions, articles, URLs will really help
thanks.you can use a profiler, which shows the allocated/created objects...
e.g.: on the following sites are demos available
http://www.optimizeit.com/
http://www.sitraka.com/software/jprobe/ -
Epson Print CD - "Increase memory size"
Bit of a long shot I guess, but I'm trying to print onto a CD using Epson Print CD... However, when I go to print, it comes up with a message that says "Please increase memory size for print CD", and won't go any further. I'm guessing that has something to do with setting preferences in OSX, but I have no idea what to do...
Any ideas?Greg,
Actually the versions are newer. I just visited the Epson website and found this info. Thank you for the pointer.
Here's the PowerPC version for your iMac iSight 2.5aAas for 10.2 to 10.4, and Intel version, if you got any Intel Macs 3.0aAs for 10.4.4 and above on the U.S. website. The U.K. links for the same printer are here: PowerPC version 2.5, and Intel version 3.0. Not sure if there is a difference, but you might want to try the U.S. version of the drivers. Realize we here in the U.S. spell colour, color!
Maybe you are looking for
-
Can we get data return from stored procedure in a select query ?
Hello, Suppose i have a function GetSum(x,y) that returns sum of two numbers x and y .We can call this function from within a sql function like this : select GetSum(4,5) SUM from dual;But is this possible through a stored procedure ? i.e., can i call
-
GR for vendor consignment 101+K in MIGO
HI All, For some reason I am not able to post the GR of the vendor consignment PO using transaction MIGO. I am getting an error message that Movement type 101 K is not planned. (Entry is not copied over) Message no. MIGO057 However I am able to p
-
Initial Load of DNL_CUST_BASIS2
I am working through the MySAP CRM System Configuration Guide - Replicating Customizing Ojects In CRM I have replicated 28 objects without problems, the only object I am struggling with is DNL_CUST_BASIS2 - the object loads no problem, viewing the in
-
The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?
-
How can I transfer a call to someone else?
Hi all, how can I transfer a call (that I've answered and noticed that it's someome elses business) to someone else with Lumia 920 / 820 or 610? Is this basic function even possible? (It was with all the older phones). Please help