[Athlon64] K8T NEO2-F motherboard and memory problem. Please help :(

I just recently built my first computer and everything seemed to be working fine.  However, my two RAM chips had corrupt memory sectors so I had to replace them.  Upon buying 4x256mb chips to replace the 2x512mb chips, I discover that 1 & 2 DIMM slots worked and the 3 & 4 DIMM slots do not.  When i try to put RAM chips in there (which work when put in slots 1 & 2) the computer will not even start up. I've tried diff. combinations of slots, even using the old chips (which work but causes programs to crash occationally). But nothing seems to make DIMM slots 3 & 4 to work.  Any ideas?  Thanks for the help.
-Ender811

How about giving complete specs. I am pretty sure I have an answer that will fix you up but I want to know which CPU core you have and what Bios your running. Those are the two important things on this issues at the moment but save us all trouble and do a complete set of specs for your signature. and then we will help you.

Similar Messages

  • Memory problem please help Idmediently

    Hey guys, Ive got an ipad 3 (16gb) and I had a look on my memory i have a few games and apps (GarageBand, keynote, imovie, pages, monoply, game of life and a few others) and it said 12.2 gb used and 1.2gb available i think that's counted wrong and I know approx 1000mb is 1gb it's impossible what do I do to get it accurate, even my brain holds more memory than that! Please help ASAP also I've tried restarting it
    Here is a list of apps:
    GarageBand 696mb
    Imovie 531mb
    Ibooks 366mb
    Keynote 362mb
    Numbers 336mb
    Pages 311mb
    And 52 apps are 150mb and under
    I know that I had the same number of apps yesterday and the memory was 8.2gb I want it to be accurate.
    Reply ASAP.

    Centipedee, No memory problem, you don't have enough room. It can take at least 2 times the required memory to load an app to the iPod. Once it loads it only requires 1.8GB of memory space but to get it there you'll need at least (maybe more) 3.6GB of space, I know it sounds screwy but it's how it works. Hope this helps, Good luck.

  • [Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

    Hi
    I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
    My first:
    I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
    My second:
    I want to connect also P-ATA HDD,but BIOS don´t see him.
    What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
    SATA as Primary Master (system disk)
    PATA as Secondary Master
    DVD-ATA IDE as Secondary Slave
    My last:
    What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
    PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
    ANY HELP WOULD BE APPRECIATED.
    Thank you

    At the first thank you for your reply.
    Yes it works. 
    Sorry I didn´t post my OS.My OS is XP (with SP2,now).
    Configuration:
    P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
    MSI 865PE Neo3-F
    2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
    ASUS FX5700 256MB
    Maxtor DiamondMax10 300GB,16MB cache,7200rpm
    DVD-RW Plextor 716AK
    After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
    so if I right understand after this settings in BIOS:
    Native Mode
    ATA Configuration - PATA only (or SATA-only)
    SATA Keep enabled - yes
    PATA Keep enabled - yes
    PATA channel selection - both
    and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
    connections looks like that:
    on  IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
    on SATA cable from SATA1 will be connect HDD SATA?
    How system knows which one from two Masters HDD is System disk?from Boot menu?
    Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
    Sorry for questions,but I am working at the first time with SATA disk 

  • The update and other problems PLEASE HELP!!!

    The ovi store on my phone asked me to download the newer version which I did, is there an update for ovistore on the computer because I haven't heard about it if there is one and it may solve the problems I have been having with it:
    1. I don't receive the messages when trying to get an app
    2. It wont let me down load apps when I connect my phone to the computer
    (also on the nokia website it told me to click the download and install button to get an app when plugged into the computer but I can't find it..Any ideas where it is???)
    please help i've had this problem since I first set up my account and its really bugging me now!!!!!!

    (Apologies for barging in Steve.)
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80071A91, or some other number? (If they're another number, what number are you getting?)

  • Movies and Audio Problem - PLEASE HELP!!!!!

    Hi,
    If I am working on the music for a movie file i sometimes open a new project with no global tracks, so as i can focus on the music, when i then choose to open the movie and see what the music sounds like with the movie all is fine..... until i stop the movie. If the movie is not playing or doesnt have the volume slider raised high (on the movie window), no sound is heard when i press a key on my midi keyboard. This means i can only come up with ideas when the movie is playing. If i close the movie and/or the global tracks, the problem remains the same. I have to close logic an reopen it in order for me to hear any sounds (audio tracks and midi). Any advice or help would be great as this is really frustrating me. Thanks, Ben

    I use Logic Plug ins and Korg/Steinberg plug ins. I have a multi instrument set up in my environment for an external Korg Trinity Keyboard. It is no longer connected as it was too difficult to control program changes etc and recording in audio takes too long for me. This many be the problem??? Maybe i could remove the multi and see if this helps. I am thinking of re-connecting the Korg to my computer but am not sure if it will cause more problems. Any advice? Thanks... Ben

  • Substri and instr problem --Please help

    Hi ,
    I would like to get the find tablename starts with 'EXP' using substring and instring . I am using oracle 9i. Please help me out
    Example : 'Schema.explogtable'
    I will use table name ' EXP' in one of my procedure as input parameter to procedure
    If tablename= substr('schema.explogtable','instr('schema.explog','.',1,3) then
    Execute Procedure1('tablename')
    Else
    Execute procedure2('tablename')
    I would appreciate your help
    Regards,
    Clarkc

    ClarkC,
    Here just replace procedure1 and procedure2 with your procedure names;
    create table temp_table
    ( table_name varchar2(30)
    insert into temp_table values ('TESTME.MY_OBJECTS');
    insert into temp_table values ('TESTME.OBJECTS');
    insert into temp_table values ('ABC.ECFOBJECTLOG');
    insert into temp_table values ('XYZ.BDEOBJECTTABLE');
    insert into temp_table values ('ABC.ABCTABLE');
    insert into temp_table values ('ZYD.CLIENTTABLE');
    insert into temp_table values ('NMS.CLIENTLOGTABLE');
    COMMIT;
    pl/sql anonymous blocks  I defined 2 variables for readibility and understanding
    DECLARE
       CURSOR tcur
       IS
          SELECT table_name
          FROM temp_table;
       table_name   VARCHAR2 (40);
       my_table     VARCHAR2 (40);
    BEGIN
       FOR cur IN tcur
       LOOP
          my_table     := NULL;
          my_table     := cur.table_name;
          table_name   := SUBSTR (my_table, INSTR (my_table, '.') + 1);
          IF (table_name LIKE ('%OBJ%'))
          THEN
             DBMS_OUTPUT.put_line ('table_name containing OBJ=' || table_name);
             -- NOTE : CALL YOUR PROCEDURE1 HERE for tables containing OBJ;
            procedure1(table_name);
          ELSE
             DBMS_OUTPUT.put_line('table_name  not containing OBJ=' || table_name);
               -- NOTE : CALL YOUR PROCEDURE2 HERE for tables not containing OBJ;
            procedure2(table_name);
          END IF;
       END LOOP;
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 300));
          RAISE;
    END;
    Here is the output of the above block
    table_name containing OBJ=MY_OBJECTS
    table_name containing OBJ=OBJECTS
    table_name containing OBJ=ECFOBJECTLOG
    table_name containing OBJ=BDEOBJECTTABLE
    table_name  not containing OBJ=ABCTABLE
    table_name  not containing OBJ=CLIENTTABLE
    table_name  not containing OBJ=CLIENTLOGTABLEHope this helps
    Regards
    Edited by: OrionNet on Jan 17, 2009 11:48 AM

  • Itunes connection and Passcode problem (Please Help!!)

    So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!

    You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.

  • K8T Neo2 (K8T800 Pro) and SATA problems

    I've used Live Update to update my board and SATA controller, but in device manager, I'm informed that the SATA controller cannot start.  During startup, I have no option to configure my two new SATA drives, and there's no evidence that my system detects them whatsoever.
    I have a 40GB IDE drive running xp, and right now, I just want to use the two additional  Western Digital Caviar SE16 WD2500KS 250GB drives for extra storage.
    Can anyone help me with this?

    limit your SATAII HDD to SATA1 mode, via jumper.
    use drivers from MSI web: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=608&kind=1

  • MOVED: K8T Neo2 (K8T800 Pro) and SATA problems

    This topic has been moved to AMD64 ATI/SiS/VIA based board.
    https://forum-en.msi.com/index.php?topic=106877.0

    limit your SATAII HDD to SATA1 mode, via jumper.
    use drivers from MSI web: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=608&kind=1

  • New system drive and memory setup - please help!

    Please excuse these newbie questions.  I DO understand that these issues have been discussed ad nauseam in this forum.  But I have spent probably ten or twelve hours exploring the various threads, and partly owing to my ignorance, partly to the specifics of my situation, partly to the disagreements between various posters, and partly to my concern that some of the clearer statements on e.g. SSD’s may have been outdated by the progression of technology, I would greatly appreciate it if I could get some recommendations for my specific situation.
    I am going to purchase an HP Z820 sometime in the near future.  I do NOT want to build my own machine; I have just enough technical knowledge to be dangerous, as they say, and want one-stop shopping for technical support if my machine develops problems.
    While I will use this machine for a variety of applications, my main concern is to optimize it for Premiere Pro. Based on Harm Millaard’s (who to my untutored eye seems to be one of the most prolific, knowledgeable, and helpful individuals in this forum) “Guidelines for Disc Usage” of two years ago, I plan to install a 300GB SSD for my boot drive, and to construct a RAID 5 array out of the remaining drives. (The Z820 does not support RAID 3.) The array drives will be either five (5) more 300GB SSD’s, or four (4) 600GB 15,000 RPM SAS HDD’s.
    Assume for the sake of argument that cost is not a factor, and that the 1.2TB storage offered by the 5 SSD drives in RAID 5 (vs. the 1.8TB offered by the 4 SAS drives) is perfectly adequate, which would you choose?  And why?
    I should add that I am a video hobbyist, not a professional, so the outfit will receive a lot less pounding than a professional’s machine.  Thus, I don’t THINK that the theoretically more limited life span of the SSD’s should be an issue, over, say, the next 3-4 years.  (Correct me if that SHOULD be a concern.)
    Re memory, I am planning on 32GB of unbuffered memory, the maximum the system will support.  I COULD get 64MB, but it would have to be registered RAM, which I understand slows things down.  The slight improvement in reliability with registered RAM is not really a concern from my hobbyist standpoint; and I think 32GB should be adequate.  I use 1080/60p footage, which of course is demanding, but don’t use a lot of special effects, or other Adobe applications for input to Premiere (aside from Photoshop, occasionally). Anyone disagree with this choice?
    Finally, is there a role for a RAMdisk in this outfit, for e.g. cache files?  Would this increase the speed, or decrease the using up of write cycles on the SSD’s to a degree that would be significant for practical purposes? If so, how much RAM would you dedicate to the RAMdisk?
    Again, sorry if you feel these questions have been adequately addressed in pervious threads, but try as I might I simply can’t manage to put it together on my own.  And thanks in advance for any help.

    Pardon me for jumping in.  (I realize the question is to Harm.)
    I am going to purchase an HP Z820 sometime in the near future.
    Congrats, this is a great system.
    ... I plan to install a 300GB SSD for my boot drive, and to construct a RAID 5 array out of the remaining drives.
    The 300GB SSD - is that an HP model?  If so please reconsider: it's an older Intel SSD X25-M series that is slow, and runs at SATA 3G speeds (not 6G), which doesn't do the Z820 justice.  Intel 520 series has been tested (by yours truly among others) and can be used in the Z820.
    The array drives will be either five (5) more 300GB SSD’s, or four (4) 600GB 15,000 RPM SAS HDD’s.
    As Harm will probably tell you: unless you also run a database server on that system, there is no advantage to 10K, 15Krpm or even SSD drives for video purposes, with the exception of possible reliability (enterprise class 10-15K drives and SSDs are tested much more extensively than desktop and nearline drives) and throughput in case of SSDs if, for instance, your workflow demands extreme bandwidth (e.g. recording of uncompressed 4K 12-bit RGB signal).
    Assume for the sake of argument that cost is not a factor, and that the 1.2TB storage offered by the 5 SSD drives in RAID 5 (vs. the 1.8TB offered by the 4 SAS drives) is perfectly adequate, which would you choose?  And why?
    Hypothetically, I'd choose SSDs: higher reliability, responsiveness, performance, lower power consumption.  I'd do research though to ensure they'd keep up with a lot of write I/Os thrown at them.
    In reality, I'd choose neither, for reasons I mentioned above.  7200rpm nearline drives have sufficient performance for the purpose, and the capacity is much higher per dollar.
    I COULD get 64MB, but it would have to be registered RAM, which I understand slows things down.
    Not necessarily.  The 2% difference between ECC and non-ECC memory (negligible as it is) is not at play here because Z820 does not support non-ECC memory.  Registered or not, it has to be ECC, and registered memory is not necessarily slower than unbuffered.  Even if it was, the 2% difference is unlikely to make any perceptable dent in performance given that no editing system runs its memory at 100% bandwidth at all times.  Then again, if cost is not a factor, you could always swap unbuffered for registered later on.
    Finally, is there a role for a RAMdisk in this outfit, for e.g. cache files?  Would this increase the speed, or decrease the using up of write cycles on the SSD’s to a degree that would be significant for practical purposes? If so, how much RAM would you dedicate to the RAMdisk?
    For timelines with limited number of effects, I wouldn't bother, with the premise that Premiere Pro has decent memory management on its own, and that memory will serve better if just given to Premiere Pro.
    If on the other hand you do start using AE heavily, you might want to dedicate a (portion of your) SSD to "global performance cache" which is a fantastic time-saving feature of AE CS6.
    HTH.

  • Ipod Memory Problem Please Help

    Just checked my 60gb Ipod after 3 music library loses due to windows, and it is reading as only 55gb available space. Is this normal because I know with external hard drives you lose some memory due to opporating system info, but should I have lost 5gigs from a 60gig hard drive just for this info? Does anyone else have this problem? Is it normal?

    mf: That sounds about right. It's accepted industry practice (sadly) to round up to the nearest big number when describing hard drive capacities. The iPod 60gig is after all a 55gig hard drive
    I bought a Lacie Terrabyte drive on the weekend to discover that it's not 1,000meg but 939meg.....I expected to lose a few gig but a whopping 61.
    So all you lost was a little over a top end Nano in capacity. I lost a whole top end 5G

  • N95(8gb) Memory Problem (please help)

    Hello
    New here, so I hope I'm posting this in the right area of the board.
    I have recently purchased a second hand N95 (8gb) but having problems with the mass memory. Yesterday, while downloading some tracks to the handset (about 2 hours worth of tracks from scratch), a warning kept appearing on the phone saying that memory was full and that I needed to delete some data. I went to the memory section of the phone and by mistake I pressed the 'format mass memory' thinking it would help, but it didn't. I still cannot put any tracks or videos to the phone. Intotal I have only 18 tracks, some 1 hour 12 mins in length. Clearly something has gone wrong.
    The phones capacity is currently reading:
    Capacity: 7735mb
    Used: 1472kb
    Free: 7734mb
    Hope that someone can assist.
    Many thanks
    Jonathan

    thats fine but i dont konw is this the latest software for this phone my suggestion would be go to nokia.com, before that switch off ur phone and remove ur battery u will find the product code it will start with the numbers "05" note these numbers i think it will be a 8 digit no i am not 100% sure,back to nokia.com u will find a link download software,there u will have an option "can i update" and it will have a box to enter these numbers enter and click "go" if u find a version greater than what u see on the phone go for the latest
    "Sorry for the long description"
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Iphone 4s and iPhoto problem - please help me!!

    Hi there
    I have searched the discussion boards for an answer to my problem, but cant find one yet.
    I have a brand new imac with Mavericks installed and up to date. My iphoto is the latest one according to the app store and I have ios7.0.3 on my iphone 4s.
    I have about 300 photos on the iphone and i connected to the imac with a usb cable and it appeared as though all the photos were imported in the usual way, so i agreed to delete them off the iphone when prompted to do so.
    However, the events for the appropriate dates have been created, but they are grey and all claim to have 0 photos in them.
    When I look at last import, it says that the last import was the import I did a few days ago and appears to ignore the one I have just done.
    Please can anyon help me find where my photos are in a simple way. I am getting very cross and frustrated. I have used macs for 7 years with no problems until this.
    I would also add that my iphoto is very slow and regularly stops responding so that I have to force quit.
    Help appreciated!
    Thanks a lot
    Nick

    Thanks to LarryHN and Old Toad, my problems are nearly over, I hope.
    I did the repair and, thankfully, my missing photos are back.
    However, I now have about 100 photos which are on my iPhone 4s camera roll and when I plug the phone in, it says that it has already imported them, but I can't find them in iPhoto!
    I can see the pictures on the mac when the phone is plugged in and I look on the iphone, but I cant see where they are.
    Do you think that having photostream has complicated matters at all?
    Also, why does the photo stream on my phone (and ipad) show more photos than the photostream folder fir Nov 2013 in iphoto? Is there a delay in appearing in iphoto?
    Finally, about 3 out of 5 times, iphoto becomes really slow and stops responding, requiring a force quit. Any ideas why this is and how to fix it?
    THis is a great forum, thanks to everyone for help so far.
    Nick

  • Nokia E61i and iSync problem - Please help!

    I had the Nokia E62 and I was syncing with my macbook pro without any any problems. Last week I got the Nokia E61i and installed the plug-in for the isync from the nokia website. I have been unable to sync the 2 phones. I have deleted the phones from isync and reset the phones but no luck. I have tried both bluetooth and cable. The isync connects to the phone but give me an error message - "An unexpected error occured. Device 'Nokia E61i' synchronization failed"
    Please I need someone to help me resolve this problem.

    This Apple Tech Support Document seems to mention exactly your error:
    iSync: Error message when synching phone via Bluetooth in Mac OS X 10.4.9 or later

  • E72 and email problem, please help me

    Hi There,
    when I want to setup me emails in E72, I do following steps:
    1) Select "@Set up e-mail" from home page of E72
    2) "Start" E-mail set up
    But the point is I have not bellow menue (#3) and E72 deal with my gmail or yahoo as other emails and I have to configure them manually!:
    3) It lists a number of email options as follows: Ovi Mail, Yahoo Mail, Google Mail, Windows Live Hotmail, Mail for Exchange, Lotus Notes Traveler, Other
    How can I solve problem?
    Thank you

    The way that worked for me, after suffering many times from trying to setup  my gmail account.
    1-Restore phone to factory settings
    2-Setup you packet data (mobile carrier) internet access (EVEN IF YOU HAVE WIRLESS LAN)
    3-Set up you email by adding your account and allow phone to use (mobile carrier)
    4-You could choose way of connecting to server (you could choose then wirless lan ) only if you want.
    Good luck and let me know if it works!
    Ahmed

Maybe you are looking for