[Athlon64] Noisy sound with onboard coaxial output - k8tneo ... Plz help me

I have K8t Neo and use onboard sound.
Analog output sound is great, but spdif (coaxial) out is the problem.
The sound from spdif is very noisy. Noisy sound in digital system is a little strange, but it's true.
When I listen to music, I hear "ch~~~~~~" noise sound very clearly.
When I watch movies encoded by Dobly Digital or DTS, "dddddddddddddddd......." noise makes me crazy.
I tested an old sound card, Yamaha DS-XG, and it was OK. So I bought a sound card , but it had same problems. I had to sell it.
I can use Yamaha sound card, but yamaha don't make a driver for it any more.
Can anyone help me?

Hi
Hmm......... not sure why, but could be EMI from PSU or PCI card or Graphic card, even a fan near the Mobo output.
Did you use same PCI slot for both sound cards?
Have you set the sound manager for spdif output, and checked no slack connections.
Good luck
jocko

Similar Messages

  • HT1414 my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me

    I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped

  • No sound through headphones!!! Plz help..

    i hve the original 8gb iphone and today all of a sudden i dont get any sound through apple hedphones...
    nothing worng with headphones as i can use them with ipod and pc...its like iphone does not detect that headphones are plugged in...no its not unlocked or jailbroken...i m still using 1.1.4...
    tried resetting the iphone but no luck...yes i searched but i found threads where sound comes from headphones but not iphone...i have opposite..plz help if u know the solution...

    This has been reported a lot on this forum. Debris gets in the headphone port. Try inserting and removing the headphones 8 - 10 times in a row and see if that helps.

  • Hi gurus,  i got a task with related to see-burger plz help me........

    here am giving description for my dought
      i have to write ,in  EDI-IDOC MAPPING USING SEE-BURGER adapter,in that mapping condition is ,When data found in ST01, map synonym of source GS02 using table GSNDPRNI
    in IDOC format  should be 10 digits padded to left with zeros.
    here EDI segment GS02,& idoc  segment is EDI_DC- SDNPRN.
    PLZ HELP ME FOR  HOW TO MAP THESE TO FIELDS.

    Hi Rohit.
    While doing the mapping for STO1, check if the length of STO1 is greater than zero. if it is greater than zero, now map GS02 to it's target field. use a udf to pad the value of the GS02 field with zeros.
    Hope this helps u.
    Regards,
    Hari

  • My i phone ringer is giving me a lot of trouble. It does not play any sound or music, the incoming call ringtone is working, but no music is playing. The problem itself disappears , and then reoccurs again. Anybody with same kind of problem, plz help !!!

    the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!

    Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback

  • No sound in windows 7... plz help

    I'm looking for 15 days and did not find the solution
    i am installed windows 7 in boot camp 4 on a macbook air (2011) os 10.7.4 . Anyway everything works fine with me, except the sound, I have reinstalled the Realtek several times and no success. I would like to know an way to solve this problem, thanks!I

    Does not work - does not compute - does not suggest why.
    What happens?
    R2.68 is current for Windows 7 64-bit
    Realtek High Definition Audio Driver R2.68-Win 7/Vista 32/64
    http://www.download3k.com/files/WDM_A406.exe
    tehre are zip and there are .exe
    just go to Realtek.com
    Notebooks like the Air may be different.
    Audio in Device Manager shows "realtek" I assume.
    http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24& Level=4&Conn=3&DownTypeID=3&GetDown=false
    You can find most things needed on this page:
    http://forums.tweaktown.com/gigabyte/30530-latest-overclocking-programs-system-i nfo-benchmarking-stability-tools.html
    http://www.bing.com/search?q=Windows+audio+realtek+MacBook+Air

  • When ever I launch my safari, it will stay on for about a minute and then quits on me. It has a "safari quit unexpectedly" dialog box with a bunch of codes that I can send a report to apple. im not very good with this kind of thing, plz help!

    Im not very good at troubleshooting, but I have played around with the system preferences. My airport connection is fine as well as the ethernet. Firewall says its not connected, (im not sure if that matters or not?)
    I have subtracted my network from the list, restarted, and then put it back and and restarted...nothing seems to be working. Iam in the middle of a correspondace course and i really need my internet back...any suggestions would be greatly appreciated!
    Thank you

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    Then GULP, check for this...
    Flashback - Detect and remove the uprising Mac OS X Trojan...
    http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
    In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
    /Library/Little Snitch
    /Developer/Applications/Xcode.app/Contents/MacOS/Xcode
    /Applications/VirusBarrier X6.app
    /Applications/iAntiVirus/iAntiVirus.app
    /Applications/avast!.app
    /Applications/ClamXav.app
    /Applications/HTTPScoop.app
    /Applications/Packet Peeper.app
    If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
    http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
    http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
    The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.

  • Problem with Installation of essbase 11v, plz help

    hi,
    when it checks for pre requisites, giving one error message ""*bold host name resolved to an IP address-192.168.1.101*"".
    on Aug 30, 2010 5:23 PM

    Sundeep,
    I blogged on this topic a while back, http://www.artofbi.com/index.php/2009/05/hostname-resolved-to-an-ip-address-windows-2008-hyperion-system-11-installation-issue/
    This should provide you with the context under which you received the message in bold.
    Also, pay attention to John's reply. When installing any software such as the EPM suite, read the Oracle documents to ensure that your environment is certified. Even if you do manage to install on XP or a non-certified environment, you may run into issues shortly down the road and waste a lot of time trying to solve the unsolvable simply because the instructions were not followed correctly from the beginning.
    Cheers,
    Christian
    http://www.artofbi.com

  • Hi Guys,,I am not getting the right output?Plz help

    Hi Guys,
    Here is my code..
    ELSEIF p_versb  = 'W2'.
        CONCATENATE lv_perxx '08' INTO lv_date3.              (20090708)
        CONCATENATE lv_perxx '15' INTO lv_date4.              (20090715)
          SELECT  mseg~mblnr
                  mseg~bwart
                  mseg~matnr
                  mseg~lgort
                  mseg~menge
                  FROM mseg
                  INNER JOIN  mkpf
                  ON msegmblnr = mkpfmblnr
                  INTO TABLE t_temp
                  FOR ALL ENTRIES IN t_firmplan
                  WHERE mseg~matnr = t_firmplan-matnr       (490045,500001)
                  AND mkpf~budat GE lv_date3
                  AND mkpf~budat LE lv_date4
                  AND mseg~bwart IN ('101', '102')
                  AND mseg~werks = t_firmplan-werks.        (werks = 1100)
    Plz suggest where I m wrong ?
    Thanks
    Steve

    Hi,
    Check the
    SELECT mseg~mblnr
    mseg~bwart
    mseg~matnr
    mseg~lgort
    mseg~menge
    FROM mseg
    INNER JOIN mkpf
    ON mseg~mblnr = mkpf~mblnr
    INTO TABLE t_temp
    FOR ALL ENTRIES IN t_firmplan
    WHERE mseg~matnr = t_firmplan-matnr (490045,500001) " Check the matnr value in the MSEG table if it storing with
                                                  "  leading zero's then use the conversion exit to get the leading zero's
                                                  " in  t_firmplan-matnr
    AND mkpf~budat GE lv_date3
    AND mkpf~budat LE lv_date4
    AND mseg~bwart IN ('101', '102')
    AND mseg~werks = t_firmplan-werks. (werks = 1100)

  • Terrible Quality issue with MPEG 2 (DVD- encode plz HELP!!!

    Hello,
    I edited something short in FCP 5 and wanted to make a DVD but the resulted mpeg-2 file has grabage all over. Not just square artefacts but a lot of problems like an old VHS maybe (but it isn't video noise either). It's more like a DV tape that would be ******.
    I tried to recompress in DV and the resulting quicktime .mov file is fine. But every time I encode it in any of the DVD presets it is terrible. Also tried MPEG-1. Same.
    As for the 2 pass encodes they crash my computer...
    Please help Obi-Wan Compressor you are my only hope.

    If you're running some flavor of Compressor 2, then try using the One Pass setting (but not the One-Pass VBR setting) at 6.5 Mbps. If you're still having issues, other things to try:
    up the One Pass bit rate to 7.5 Mbps
    Alter GOP to Open (from the default Closed)
    Alter GOP structure to IP (from the default IBBP)
    If I'm having issues with Compressor 2's Two Pass encodes, I can usually save my hide with a One Pass 7.5 Mbps Open IBBP GOP encode. If that doesn't work, Plan B is to do a One Pass 6.5 Mbps Closed IP GOP encode.
    Or are you using Compressor 1?

  • Problem with freezing and volume control PLZ HELP

    every time i go into my volme and ringtones and blackberry messenger settings and it just freezes and the only solution  is to take out the battery, 

    i can not get my volume changed or turned of my company that i deal with is telus i have no volume on my phone what so ever

  • I am having  problem for my incoming call while accessing in GPRS or WIFI with my iphone 3g so plz help

    I am having regular problem with my iphone i am not able to get my incoming call while i am surffing on my iphone 3g, if sum one call me he get the message that the person u r calling is out of coverage area.
    And after completing my work on iphone i have to every time reset network in my iphone manually now its every day's problem, so if u have solution plz give me
    THANKS.........

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • Applet access denied  with Tomcat 4.1.29 -- Plz Help

    I searched for answers in the forum and used the jarsigner to certify an applet that uses Oracle thin driver. Modified the catalina.policy to:
    grant {
            permission java.security.AllPermission;
    permission java.net.SocketPermission "127.0.0.1:1024-", "accept, connect, listen, resolve";
              }; I am still seeing this error:
    access denied (java.net.SocketPermission 127.0.0.1:1521 connect, resolve)PLEASE HELP
    Murthy

    Thanks for the clarification! I created a java.policy file on the client. I'm now seeing null pointer for the connection variable. BTW, on the client I saved the java.policy at $HOME and the policy tool says it can't find it!!!

  • Problems with J2ee tutorial-Bookstore1 example--Plz help

    Hi,
    I have been working on the bookstore1 example servlets from the J2ee tutoril for quite a few days.
    I followed the same procedure as given in the tutorials to deploy the application.
    Wen i type
    http://localhost:8080/bookstore1 on the browser,
    I get the erropage.html and the .gif file listed.
    But when i try to use
    http://localhost:8080/bookstore1/bookstore it issues an error message
    saying "The application is unavailable. Please try later."
    I happened to see the same question posted by many,,,and the solution being,,the Pointbase server should be started in the background
    I think my Pointbase server is running fine...But anyway i would be greatful if anyone cud reply in much detail about the configuration and working of the pointbase server.Or if my problem is due to some other cause,,please let me know.I jave all the properties set in the "asant listprops".
    Please help
    S&S

    Hi,
    I have been working on the bookstore1 example servlets from the J2ee tutoril for quite a few days.
    I followed the same procedure as given in the tutorials to deploy the application.
    Wen i type
    http://localhost:8080/bookstore1 on the browser,
    I get the erropage.html and the .gif file listed.
    But when i try to use
    http://localhost:8080/bookstore1/bookstore it issues an error message
    saying "The application is unavailable. Please try later."
    I happened to see the same question posted by many,,,and the solution being,,the Pointbase server should be started in the background
    I think my Pointbase server is running fine...But anyway i would be greatful if anyone cud reply in much detail about the configuration and working of the pointbase server.Or if my problem is due to some other cause,,please let me know.I jave all the properties set in the "asant listprops".
    Please help
    S&S

  • Problems with Audio once on PC, PLZ HELP. 6230i

    i had some recording on my nokia (6230i) phone (audio). i uploaded them onto the computer about a year ago. they worked fine. I THINK they were wav file but im not entirely sure. my computer was going to the shops to get fixed so i downloaded all the files onto a CD. now 8 months down the line i looked at my cd and they are all WMPFile. what is this? i cant listen to them or anything. i got a new computer now s i dont know what happened. (see pic below). one file works but the rest dont. is there ANY way of saving them as i cant lose them. PLEASE.
    BTW i have mediainfo and on that it says:
    AMR: 98.4 KiB
    1 Audio Stream AMR

    The only way to really troubleshoot and eliminate the MBP itself, is to try another unit just like it. You may have trouble getting Apple to fix or exchange the unit though if it doesn't act up without your equipment hooked up to it.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Maybe you are looking for