[Athlon64] Ram and USB problems!

Hi to all, this is my first post so be kind and patient.
My system:
(Hardware) K8T Neo2-F (VIA K8T800pro & VT8237), Athlon64 3200+ 939, 2x 256mb Kingston KVR400X64C3AK2 (Nanya) ram sticks, Maxtor DM 120mb SATA drive connected to SATA1, Liteon DVD connected to IDE2, Liteon 350 power supply.
(Software & Drivers) Win-XPpro SP2, VIA Hyperion 4in1v456v, VIA RAID OM74 v4.12, VIA USB2 V260-L.
I’ve got 2 problems:
Firstly, the board will not post unless I stick the 2 ram modules in DIMM 1 (Green) and DIMM 2 (Green) and ONLY reads 256mb while there is 512mb in there.
It also operates in single channel mode and not duel channel mode.
I checked the 2 ram stick with Cpu-z and it registered 512mb in single channel mode.
I tried putting 1x256mb in DIMM 2 (Green) and 1x256mb in DIMM 4 (Purple) as the manual says but NO GO!
I tried putting 1x256mb in DIMM 1 (Green) and 1x256mb in DIMM 3 (Purple) but also NO GO!
Secondly, when ever I try to plug in any USB device it slows the computer to a disabling pass especially when starting up window.
Can any one help please?
Many thanks.

Thanks Tiresmoke,
I updated the Bios to v3.3 and every thing is much better now. The board reads 512mb; one 256mb in DIMM1 (Green) and another in DIMM3 (Purple), and in duel channel too.
The only problem I have now, is that after XP loads there is about 20 secs of darkness and I have to move the mouse a little before I can enter in to XP's desktop, otherwise it restarts and goes into F8 (the safe mode screen)!!
That will have to do right now untill I find a solution for the moving mouse thing!
Thanks again.

Similar Messages

[VIA Series] memory and usb problems

Hello...... I have the MSI PM8M-V motherboard, intel celeron 2.93 ghz processor and 256 meg kingston ram. I am upgrading about 50 pcs with this setup. On some, the system will not see any of the USB ports and on almost all of them, the system reports that I have 192 meg of ram instead of the 256. Is this a normal thing with the memory and has anyone else had the problem with the USB ports. Thanks

Quote from: Maesus on 20-December-05, 15:37:44
part of the RAM is taken by the video. That's why you only see 192MB instead of 256MB (64MB is taken by Video).
USB ports? make sure you enable them in the BIOS.
Make sure you have the Chipset Driver updated for the USB problem.
You might also check how you have the Front panel USB’s hooked up to the header on the Mobo. Make sure it is correct.

Nissan Altima BlueTooth and USB problems

Just picked up my 2010 Nissan Altima with Premium Sound Package (includes BlueTooth and USB). Palm P100EWW on Sprint.
Problem 1) Bluetooth pairs and connects, allows me to make or receive calls. However, it did not download my phone book, so I am not able to call people by saying their names. If I say List Phonebook, it says that there are no entries to list. Help!?
Problem 2) I want to play music via the USB. When I connect my Pre, the car screen says "Check Device" and will not do anything else. Help!?
Thanks in advance,
JimR

Class action lawsuit. I hate saying that as I think lawsuits are frivulous but ...
1) Bought my 2010 Altima in Oct. 2009
2) Non Nav System
3) Phonebook will not download
4) Phonebook works in Nav system
5) Engineer was brought in to research
6) engineer even had problems with other phones in non nav altima
7) i replicated issue and fix for the engineer in under 30 seconds
8) Fix = nav system works 100% no issues
9) Received phone call yesterday from Nissan telling me I'm FU&&ED!!!
10) requested they upgrade to nav system as that works
11) answer = I'm FU&&ED!!!

10.4.7 update and USB problems

I have been experiencing problems with my USB devices (other than my Apple mouse and keyboard) since updating to 10.4.7. I have a card reader, a Palm device, a USB midi keyboard and a digital camera dock connected to a USB hub connected to the back of my Studio Display.
Randomly they start to beep like they do when the system boots or they are connected or reconnected without anything or anyone touching them. Sometimes they just beep, other times I lose functionality until I disconnect and reconnect the hub or device.
I have disconnected all, and connected just one or another (without the hub as well) but no matter what is connected I still get the same issue of the system thinking the devices are connecting or disconnecting at random times. This is new with 10.4.7, as I have had the same hardware connected as far back as 10.2. Anyone else having this problem, loss of USB functionality or sollution for such since updating to 10.4.7?

I too am having many of the same issues as all of you. I have my keyboard, mouse, and printer hooked up to a NEC USB 2.0 Manual Share Switch Hub. The hub is connected to a non-factory USB 2.0 card I installed in my PowerMac. Before the 10.4.7 update, I had none of these following problems.
Everything works and has worked great until I put the computer to sleep. Upon waking, the USB hub refuses to acknowledge my computer. I also get two strange beeps as it is waking. And because my input devices are hooked up to the hub, I am unable to do anything but restart the computer, upon which all becomes well again with the usb hub.
I defintely prefer to put my computer to sleep rather than restarting it everytime. Hopefully apple provides a fix soon; I really don't feel like messing with extensions. I could always revert back to 10.4.6, but I guess I was being optimistic that the fix would come soon. APPLE, get on it!
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)
PowerMac G4: Dual 500 mhz, 1 gig RAM Mac OS X (10.4.7)

Z87-G45 Ethernet and USB problems. And BIOS flash problems

Hi. I kind of have a problem and hope you guys can help me.
I got this motherboard yesterday but I got a major problem with the Ethernet connection. It will simply not work, it’s totally dead. I have tried to enable everything that has to do with the Ethernet (Settings/advanced/intergrated peripherials) but it still will not work. There is no light at the back side that indicates that there is signal when I plug in the cable. I have tried the cable on my laptop so I know there is signal.
There is no problem installing windows, but I can’t install the drivers for the ethernet. I get an error message then that there is no hardware that can use this drivers.
Are there any places in the BIOS where I can enable it? How can I get this up and running?
And my USB driver is kinda messed up too. My 120MB UBS pen is found and can be used, but my 64Gb flash pen and my 500Gb USB HDD will now work with the USB. I only get the USB "ping" connection sound over and over and over and over again with the windows error, drivers not installed.
The other thing about the USB is that every time I restart the PC, I have to unplug the mice and put it into an other USB to activate it.
I have tried to flash the BIOS, but when I try (after pushing m-flash and connecting the USB and finding the file), the whole BIOS just freezes up and nothing happens. I try to wait a bit but nothing happens. I have to manually restart the machine by "force" (Turning the power to PSU off and on again. Ayone know if there is a problem with flashing the BIOS from USB? Or maybe that the USB system is messed up? Any other way I can flash the BIOS?
I have downloaded all the latest drivers and updated.
Best regards
Robert

Quote from: flobelix on 08-January-14, 00:44:08
Again do not try to use MFlash. Try the board outside case like suggested.
THis is making me frusterated now......
I have now had the motherboard on my wood table with a antistatic tablecloth and antistatic armband.
I only plugged in 1 ram, power, a monitor and mouse/keyboard(USB).
I manage to get the USB pen bootable so I could do the memtest and biost flash.
The USB ports are still unstable. I still have to move my mouse and keyboard from slot to slot when I restart the machine. It feels like if random USB conection is being turned off and on for every time I start the computer.
I connected a HDD to install Windows 7 64bit.
The computer will still not read USB storage with larger then my 120mb storage in both the BIOS and Windows (I suspect that 1GB is the limit for some rason). It only shows that USB device was not installed.
After I isntalled the USB 3.0 drivers that came with the mother board, the USB 3.0 system just stoped working. I tryed to update the drivers to the latest ones, but they still dont work. The USB 3.0 drivers do work in BIOS, but the drivers that came with the motherboard does not support windows 7 64bit. Or this motherboard.....
The ethernet conection is still FUBAR. When I try to install the drivers from the CD, the "LAN picture" is still grayed out. And when I try to force install the drivers, nothing will accept the network connectin. Trying to install the Killer Network Manager just ends up in "No supported hardware found in your system". It is like that the ethernet system is turned totally off.... But in the BIOS is marked as enable.
I have tryed to installe Realtek drivers, Intel drivers and the Atheos drivers, but non of them will install, all just say that there is no network that supports this drivers.
I am at my wits end right now. During the last 15 years I have build about 20 computers and this motherboard is taking 1st price for being the worse one ever.

10.5.6 update and USB problem.

Since upgrading to 10.5.6 whenever I attach my ipod or sony reader it now takes 4 or 5 minutes before the computer recognises that a USB device has been plugged in.
Anybody else had a similar problem or knows what is causing it.
Many thanks,
Allen.

I had a kernel panic with a USB-connected scanner. After a lot of experimenting, I changed the USB port the scanner was plugged in to and everything worked fine.
Try plugging your USB accessories into different USB ports. It couldn't hurt

RD 480 RAM and BOOT problem

Hi
I'm having a continuing problem, since I addded two extra Gb RAM to the original system configuration.
MB MS RD480 Neo2
CPU AMD64 X2 4200+
VGA MSI X800 GTO 256 MB
RAM 2*1Gb Kingston ValueRAM DDR 333
PSU: Akasa 550W
2*SATA WD 250 GB SATA 2
When I added two more RAM modules (2* 1Gb) the BIOS only recognized 3072Mb.
I ψontacted the technical support dept and their reply was to flash the BIOS to the latest (? beta) version, 3.3B3. And now the touble begins..... At first the PC booted (almost) fine, reporting 4096 Mb -but only in the first boot screen, because in the second one, it still reported 3072 Mb of Ext. Memory.)
Then I entered the BIOS again and changed the Boot sequence....AND after that...nothing! The PC does not boot (I think). It tries dozens of times to access the CD-ROM, and after a long, long time (five minutes or more) it beeps "normally" but the screen remains blank!
I am at a loss! Looks like the VGA card is damaged??? (MSI X800 GTO 256 MB)....
What about that?

Oh, I did it....removed CMOS battery, switched the CMOS jumper, removed the power cord... everything....
BUT the problem is still here...

Asha 501 and USB problems with MAC OSX 10.9

I checked everywhere and I could not find any threads about this problem, so I'm asking here, in the official support forum.
The problem is:
Connecting the Nokia Asha 501 to the mac (via USB cable), and selecting "external memory", the memory card is mounted and I can browse the contents, BUT the photos show corrupted. I even lost some, because I tried to open them in the Preview app on the mac. (take a look at the attached photo of this post, a screenshot clearly showing corruption)
Importing the photos via Bluethoot works, and the photo on the phone are showing fine. The memory card is okay, I checked with an external card reader.
Also:
- This problem does not show with Windows 7/8
- This problem does show with other Mac OS X
The phone is updated, I flashed it with the Nokia Software Updater and I formatted the memory card.
Any help?
Attachments:
Schermata 2013-11-11 alle 17.13.07.png ‏285 KB

I have the same problem. Would be great to have a solution. I have some photos on the phone I'd like to use and keep, but at the moment they are stuck on the phone.
John

Elitebook 8460P - Shutdown and USB problem

We're having a very odd problem. When the system (HP Elitebook 8460P running Windows 7 x64 Enterprise) is online over wireless, everything works fine. HOWEVER, 2 very odd behaviors manifest if the system is not connected to a wireless internet connection:
- It will not shutdown. The system will hang at "shutting down . . ." message. If the power is turned off (5 sec press on power button), it will boot up the next time saying that it was not shut down properly.
- one of the USB 3 ports will not work (this is incredibly odd!). Not sure how the 2 could be connected, but apparently they are!
The system is well-maintained, and shows no signs of viruses or malware. All drivers and software are up to date, including BIOS. If the system is connected any working wireless connections, neither problem occurs.

RNGhatesMe wrote:
We're having a very odd problem. When the system (HP Elitebook 8460P running Windows 7 x64 Enterprise) is online over wireless, everything works fine. HOWEVER, 2 very odd behaviors manifest if the system is not connected to a wireless internet connection:
- It will not shutdown. The system will hang at "shutting down . . ." message. If the power is turned off (5 sec press on power button), it will boot up the next time saying that it was not shut down properly.
- one of the USB 3 ports will not work (this is incredibly odd!). Not sure how the 2 could be connected, but apparently they are!
The system is well-maintained, and shows no signs of viruses or malware. All drivers and software are up to date, including BIOS. If the system is connected any working wireless connections, neither problem occurs.
Hello!
I suggest you open your command prompt and run the "sfc /scannow" command to ensure that your system files are intact. Make sure to post the result.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

790GX G65 Firewire and USB problem

I've m-audio firewire 410 sound card and cubase5 (has a usb dongle to work)
before this mainboard I was using K9A2 platinium V2 and Amd 9950 cpu everything was working perfectly
now I've upgraded my board (as you see) and bought a AMD 955
now when I install the sound card driver it's making somekind of digital distortion and also the sound is moving to faster or slower (all the time) so I'M hearing funny voices
The Cubase5 Usb dongle is having some connection problem. It force me to change the usb port everytime I start cubase
I've updated my bios but guess what.... They're still with me.
Please some help
I'm using Vista home premium 32, I've tried it on Xp and windows 7 64 RC7100 the resoult is always the same

Quote from: Bas on 19-July-09, 16:39:47
Are the energy settings properly configured for USB and the CPU?
Could be Cubase doesn't like Cool & Quite?
Can Cubase work with quad-core?
Can the powersupply handle everything?
What is in your system, we don't know much: >>Posting Guide<<
Read the guide this time.
My system is
MSI 790GX G65 , AMD 955 BE, Corsair 1600 MHZ 4 GB (TW3X4G1600C9D) , 6 HDD (one is IDE), ZOTAX 9800 GTX+, 750 watt PSU(corsair TX750W)
I've some pci card for my music buss. but i didn't install them yet. Not before everything works fine
Cubase works fine with quad core , my ex-system was a quad core.
the problem with cubase comes this way. I turn on the pc (dongle is on all the time) start cubase and get the message "Connection problem with dongle change the usb port) after I change it everthing works fine. infact I'm not making cubase problem a big deal. my real problem is firewire.
About the energy settings, I didn't change anything on mainboard, why do I need to change the power settings for usb? aren't they standart?

LENOVO K3 NOTE ISSUE-BATTERY DRAINING FAST AND USB PROBLEM!!!!!!!!

i have a problem in my K3 note, bought recently through flipkart..the phone was working fine but suddenly, now USB is not detected...whenever, i attach to the AC charger or charge with USB connected to laptop, it is neither getting charged nor USB is detected... But if i switch off the phone, now the phone gets charged... i have not been able to identify what the bug is about? i have factory resetted and also the battery was removed several times..however, the same problem is occuring.... Hope, i can get a solution from this portal Battery is also draining fast after this bug has started. Thanks in advance.

since many people reporting the heating issue.
i would like to ask you a favor to help me to do a experiment.
i am not sure if you guys know we have a feature called "background app management", it can restrict background tasks to block them consuming current drain. The heat could be generated by drain consumption.
the feature is at Settings->Power manager->Background app management.
I made a video shown at below link:
https://drive.google.com/file/d/0B9700J-TyX52clFQUWRDUEVHWlE/view?usp=sharing
Please let me know if you can get some benefit on this issue.
Thanks
Wang

HP DV3-2230ea BIG Touchscreen and USB problem.

My laptop HP DV3-2230ea was working fine earlier. Now the touch screen is not working and the laptop continuously detects a new USB device but it cannot be recognised, then starts over and over again, with the annoying sounds.
Help PLEASE

For the touchscreen not working...Try and install the Touchscreen driver from this link and check...
On the USB issue, to start with can you post the screenshot of the device manager, we can take it from there...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Floppy and USB problem Km4v

Here is my spec before I start!
MSi KM4V motherboard
QTEC 550W PSU +3.3v=30A +5V=40A +12V=20A
Duron 1.6Ghz CPU
256Mb PC2700 DDR
DVD Rom drive
Floppy
40Gb Western Digital HD
Windows XP Home edition
Coolermaster Dream heatsink and fan
2 80mm Case fans
I have two of these systems set up identically. My problem lies in that one system is not working correctly. The problomatic system does not show the floppy drive or USB controllers. I have tried searching through XP, to no avail. The floppy disk controller is present but no floppy drive. No USB is shown at all. I have checked wiring and it is identical to the fully functioning system. For the floppy I have tried two different drives and three cable each with no luck. Uninstalling the FDC makes no difference. If I put the floppy cable in upside down(done by accident!) the light stays on it, so its seems to power up, but not be recognised.
Any help is appreciated as one of my kids will be gutted if they don't get a working crimbo present.
Thanks

Hi kerplunkuk,
Try:
1. run: sfc /scannow from command line or dos prompt (keep the Windows CD ready);
2. Download "Advisor" from www.belarc.com and check if XP and all updates are installed correctly; re-install what is necessary.
Hope this helps!
Hans

Gx630 and usb problems

I've tried on numerous occassions to connect my sony ericsson phone via usb to my gx630 using any of the 3 usb ports with no luck in the computer recognizing the phone. I've installed/reinstalled the driver software numerous times. Pretty much gave up as I thought it was a problem with the phone.
Now I just bought a digital camera and while the gx630 recognized that a Canon camera is attached via USB, I get the following error when I go to Device Manager and in the device status box it states the following:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I then select "check for solutions" and get no response.
At this point since I cant connect 2 different USB devices, I'm guessing its a problem with the gx630. Anyone have any ideas where to start correcting the Canon camera USB connection problem? Not so much worried about the phone at this point....thank you for your assistance.

Do OS repair

Internet and usb problems

HelloI just bought a cb3-111 afew days ago, it worked great when I first brought it home but now a couple of problems have come to light.first of all i keep loosing internet connection, the wifi signal is full bars but it will just randomly loose internet even though the wifi is still connected and strong. Second, the usb ports connect and disconnect. Example, if I plug my phone into the usb port to charge it will connect then disconnect sometimes it will stay on for a while then disconnect and reconnect on its own. the same thing seems to happen with my thumb drive. I would greatly appreciate any help to resolve these problems

morb,
Check and make sure that you are using the most current build for your Chromebook. You can also try to run a powerwash on it to see if that fixes it.

[Athlon64] Ram and USB problems!

Similar Messages

Maybe you are looking for