[Athlon64] RAM question for the K8T Neo2 F

Question

The current RAM i have in my system is as follows.
2 chips Kingston 256 DDR 400 single sided
2 chips Super Talent 512 DDR 400 single sided
I tried installing the 2 512s in the green slots and the 2 256s in the Purple slots and when i booted i got a 3 beep error with no POST or BIOS at all.
I switched the chips to the 512s in the DIMM 1 and 3 slots andthe 256s in the 2 and 4 slots. The computer boots fine. I'm not sure exactly how to tell what speed the chips are running at and if they are running in dual channel mode. I looked in the BIOS and under the cell menu the DDR speed says 200 and the HT frequency is set to 1000mhz.
What happened to the chips clocking at 400 and the dual channel?
Thanks in advance.

Answer 1

Sorry about that I didn't think it was that involved.
Here is what CPUz has to tell me.
CPU-Z version 1.30.
CPU(s)   
Number of CPUs 1
Name AMD Athlon 64 3200+
Code Name Winchester
Specification AMD Athlon(tm) 64 Processor 3200+
Family / Model / Stepping F F 0
Extended Family / Model F 1F
Brand ID 4
Package Socket 939
Core Stepping DH8-D0
Technology 0.09 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2, x86-64
CPU Clock Speed 2000.0 MHz
Clock multiplier x 10.0
HTT Bus Frequency 200.0 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 512 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 2000.0 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 128 bits
Mainboard and chipset   
Motherboard manufacturer MSI
Motherboard model MS-6702E, 1.0
BIOS vendor American Megatrends Inc.
BIOS revision Version 07.00T
BIOS release date 04/02/01
Chipset VIA K8T800 Pro rev. 00
Southbridge VIA VT8237 rev. 00
Sensor chip Winbond W83627THF
Graphic Interface AGP
AGP Status enabled, rev. 3.0
AGP Data Transfer Rate 8x
AGP Max Rate 8x
AGP Side Band Addressing supported, enabled
AGP Aperture Size 128 MBytes
Memory   
DRAM Type DDR-SDRAM
DRAM Size 1536 MBytes
DRAM Frequency 200.0 MHz
FSB:DRAM CPU/10
CAS# Latency 3.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 3 clocks
Cycle Time (TRAS) 8 clocks
Bank Cycle Time (TRC) 11 clocks
DRAM Idle Timer 16 clocks
# of memory modules 4
Module 0 Infineon DDR-SDRAM PC3200 - 512 MBytes
Module 1 Infineon DDR-SDRAM PC3200 - 512 MBytes
Module 2 Samsung DDR-SDRAM PC3200 - 256 MBytes
Module 3 Samsung DDR-SDRAM PC3200 - 256 MBytes
Software   
Windows version Microsoft Windows XP Professional Service Pack 2 (Build 2600) 
DirectX version 9.0c
I think thats it. I did notice that under the memory tab and in channels# it says dual. So in dual mode it acual says its clocked at 200mhz, but you double that for the 400 rate as advertised?