[Athlon64] RESTORING FROM FLASHING PROCEDURE CRASH
Pleeeease Help!
While flashing BIOS I've lost a power for a moment. This was enough to get the old BIOS partialy erased. Now the system doesn't boot at all nor displays anything on the screen. It looks like most of the BIOS was erased. How can I restore it just to any version so I can get the system working at all ???
Arthur
Quote from: aklisiewicz on 24-March-05, 13:59:03
Pleeeease Help!
While flashing BIOS I've lost a power for a moment. This was enough to get the old BIOS partialy erased. Now the system doesn't boot at all nor displays anything on the screen. It looks like most of the BIOS was erased. How can I restore it just to any version so I can get the system working at all ???
Arthur
Get a Bios Saviour from www.ioss.com.tw
Depending on where you buy it, you can specify which bios file you want it to be preflashed with (you have to supply file), plug it in, boot with good bios, switch to bad bios, and reflash it. I love my Bios Saviour, it has gotten me out of several tough spots. And beyond that, it is very nice to have when you are experimenting with different hacked or modified bioses....
Similar Messages
-
Restore from hibernate causes crash
Hi,
My MBA hibernates when it is not being used for a while. When I power on after hibernate, the system crashes and I need to restart. I get the error message below. I did a search but couldn't find anything. Anyone have an idea what can be wrong?
Wed Nov 5 18:47:18 2008
panic(cpu 0 caller 0x00402947): "Hibernate restore error e00002ca"@/SourceCache/xnu/xnu-1228.7.58/iokit/Kernel/IOHibernateIO.cpp:2398
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x34173c38 : 0x12b0fa (0x459234 0x34173c6c 0x133243 0x0)
0x34173c88 : 0x402947 (0x49b578 0xe00002ca 0x2fcad000 0x0)
0x34173d48 : 0x1b136c (0x8434e058 0x446 0x0 0x120)
0x34173d78 : 0x727788 (0x727568 0x3 0x757960 0x0)
0x34173de8 : 0x71c458 (0x3c63400 0x2 0x0 0x3ccc080)
0x34173e08 : 0x43459d (0x3ccc200 0x534838 0xffffffff 0x0)
0x34173e58 : 0x4466f1 (0x3c63400 0x49fb2c 0x3cccf80 0x4)
0x34173ea8 : 0x414992 (0x3caad00 0x4 0x1d 0x2)
0x34173ee8 : 0x41b442 (0x3caad00 0x427dd80 0x0 0x0)
0x34173f38 : 0x415b2d (0x3caad00 0x427dd80 0x3c9c7c0 0x0)
0x34173f68 : 0x41fa80 (0x3c9c7c0 0x1 0x34173f98 0x41f2d9)
0x34173f98 : 0x41f762 (0x3c47ac0 0x3c47ac0 0x518d28 0x5164000)
0x34173fc8 : 0x19eccc (0x3c47ac0 0x0 0x1a20b5 0x46b3f20)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleACPIPlatform(1.2.1)@0x71b000->0x757fff
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x592000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x5a2000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9F33
Kernel version:
Darwin Kernel Version 9.5.0: Wed Sep 3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386
System model name: MacBookAir1,1 (Mac-F42C8CC8)I have the same problem on my Macbook Air with 10.5.6 - about 90% of the time, restore from hibernation crashes with the same message. I have submitted the crash report to Apple 10-20 times or so, but now I don't bother. This problem stared a while back (maybe two months or so) - I've had my Air for almost a year.
I have Parallels desktop and Coolbook Controller installed - other than that I don't have anything exotic installed likely to affect the restore process (AFAIK). Do anyone else have any of these apps installed and experience the crash on restore from hibernation crashes?
best, --Inge -
Restore from Time Capsule after Hard Drive Crash
The HD on my iMac crashed Christmas Day. I have been running backups on Time Machine to a Time Capsule since I purchased the iMac (and also backing up a MacBook Air), but never had any occasion to see if it worked.
I yesterday got the computer back with a new HD installed. When I tried to do the restore from Time Capsule from the Setup Assistant which ran on start up, I could not get past the initial screen. It kept hanging up on "Opening Time Capsule," and then on one occasion it found only the MacBook Air back up volume.
After some research here, I tried running the utility after booting from my Snow Leopard disk. This time, it immediately found the backups from both computers, but hung up on opening the iMac backup.
After more research, I ran the disk utility and repaired the HD on the iMac. It finally worked -- I woke up to a "Restore Complete" message (it started around 10:00 pm last night). The iMac started up without a hitch to the way it looked Christmas morning. The only problem I have noticed is that my most recent events in iPhoto are empty. The thumbnails are there, but no pictures. I tried to rebuild the library using iPhoto Library Manager, but no luck. Any ideas?
The other thing I noticed is that I had to reauthorize the computer for my iTunes purchases. Will Apple fix that so it doesn't chew up my last remaining authorization?think about the speed of wifi here
speed at 802.11n = a theoretical 540Mbps (less in real world scenarios)
Mbps = Mega bits per second
MBps - Mega bytes per second
8 bits = 1 byte
8 mega bits = 1 mega byte
How long would it take you to download a 1 gig file from the internet wired into your modem? About 10-20 min? And that is taking into account that the info is being uploaded hardwire. Now imagine that same file over wireless in your home being upload by the Airport card in your computer. People over look upload speed when considering these things. The wireless upload speed of your Airport card is what is limiting this. Just a limitation of the technology, not a fault of Apple just stating the numbers here. -
Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT -
Intel Mac Mini crash. Restore from TimeMachine failed. Reinstall from DVD failed
I am at a loss. My Mac Mini (Intel 2.53ghz, 10.6.7, 4gb RAM) froze today. Mouse would still move the cursor, but nothing responded. After letting it go for perhaps a half hour, waiting for a chance to get control back or to perhaps relaunch Finder, I gave up and turned it off by holding down the power button. On reboot, it would not make it past the startup screen. I inserted the restore DVD that came with this Mac Mini, it booted from the DVD and I tried reinstalling OSX 10.6 from the DVD. It proceeded to around 30% install and crashed. I turned it off again, started up again form the DVD, and went into Disk Utility. I verified the internal HD and it had no errors and nothing to repair. This time I went directly to a restore from my TimeMachine backup. (I had actually installed one new program today, and in case that program was the issue I chose a restore from the morning a few hours before that new program was added.) The restore progressed to 86.6%, then crashed. I saved the installer log to an external drive.
I took a few hours away from it, but came back after a few hours. I attempted to boot from the DVD again, and it would not get beyond the Apple sreen. I turned it off by holding down the power button, unplugged the power supply, and searched online for around 30 minutes. After finding little online, I booted from the DVD again, this time succesfully, and am currently running a TimeMachine restore again which I started after I began typing this entry because, honestly, when I started typing this I didn't think it would boot from the DVD again. At the moment, the resotre is at 12.7%, but considering it crashed at 86.6% last time, I'm not too hopeful.
Any thoughts or advice? I'm not totally freaked out as I keep all documents on two external drives and backed up, in addition to having a 2tb TimeMachine drive with this system, all connected by fw800. But... it's not like I don't want to get this Mac Mini working again. It's from November 2009 an I don't have Apple Care for it, which I suppose means they'll charge me a fortune if I take it in. (I'm grateful to have this 11.6" MacBook Air to work on.)
Until Disk Utility told me that the internal drive was okay, I was thining I should try sticking a new hd inside and reinstalling from there. Not sure what to do if this TimeMachine restore fails. (at 18.5% now.)
My thanks to any who read this.Thanks for responding. I forgot to come here and delete this thread. As it turned out, I switched from trying to use the OSX Install disc that came with the Mac Mini and instead used a Snow Leopard retail dvd. That disc worked perfectly. Pretty disturbing that the dvd that came with the computer would not work, while a store bought one worked. Glad I bought a retail version of OSX to hackintosh a dell mini or I wouldn't havebeen able to fix this.
-
HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive
Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Restore from Time Machine after HD Crash
My Powerbook HD crashed - it had been backed up with Time Machine to an external hard drive. My new hard drive has been installed. I started up with my Leopard Upgrade install DVD. The first screen that comes up says this software can't be installed on this computer. I clicked OK. Then the tool bar is accessible. Under utilities I selected "Restore from Back up" and nothing happens no indication that it is doing anything. I checked under system profiler and my external hard drive with the back up shows up. But it does not show up on the desktop. What should I see on my screen when I choose Restore from the utilities? I just see the Leopard Purple screen desktop. Please help. I have re-started, shut down and started over several times with the same results.
Thanks for the link Pondini, all of that sounds very good, but reality hits when you read posts like this thread. The great thing here is that it worked, but as you see, it was not a straightforward process in reality. It took twists and turns and frustration and menu's that didn't say what they should have.
All in all I'm very happy to hear that TM brought home the goods and made this user's day complete.
I have partitioned 2x the size of my system hard drive on my new LaCie backup drive. That partition will be all the room I am giving to TM. I do not have any documents on my system hard drive, so it is basically a very quiet drive with little going on other than the occasional software update. I think TM will be happy with 2x the size for backup because also, I only use 1/3 of the system drive for applications, the rest is blank. I do all of my work on external drives and I use conventional means to back up my work onto other drives.
I think I am becoming well versed in TM after the OP's experience here. As added insurance, I made another partition on my backup drive and have used SuperDuper to clone the entire system drive, just as more bullet-proof protection against the day when.
Thanks to everyone here. This has been an exciting thread to say the least. Glad it's over,
Ken -
How to restore from back up when some files are corrupt and crash the restore?
iphone 4 16gb
IOS 5.0.1
iTunes 10.5.3
History:
installed iOS5 back on release date. install was interrupted, likely due to high volumes. Completed install. Initial problem noted: unable to add events to calendar. Then problem progressed to "Voice Memo" app crashing. I installed "Quick Voice" app as an alternative. Problem progressed further to an unexplained increase in "other" content on iphone. Last week I tried syncing my phone and received error message that I didn't have enough space to complete sync. Noted then that "other" content was around 5.4gb! Removed "voice memos" playlist from selected playlists to sync under music tab and noted that other content dropped to 4.5gb
Synced the phone and noticed that it appeared to move through the sync process faster than usual. Sync showed "audio" content and "other" content to be the same size at about 4.5gbs.
After sync was completed I disconnected the phone and looked at the content of my phone. No apps, No music, No photo albums! SMS texts, Notes and Contacts still all intact on phone.
Tried multiple solutions including restore to fix the problem. Each time, when the phone is plugged in and mounted in iTunes, it shows audio content at 4.5gb and other content at 4.5gbs yet the phone itself has no music, no apps and no photo albums. It does still have pictures in "camera roll", though.
After trying many suggested solutions, I gave up and went to Apple store to see the Geniuses (Genii ) They did a firmware update and reset my phone. I was advised to restore from back up. However, when I tried to restore from my back up, it would fail to complete. Unable to restore from back up and sync attempts fail.
The only data I really don't want to lose is my text message history, my notes and my voice files from "Quick Voice" app.
Restoring from back up is not an option since I believe there are corrupt files in the back up. So what I want to know is can I restore my phone as a new phone, and then re-install my text message history, notes and the sound files from the "Quick Voice" app? Perhaps using a 3rd party app to retrieve those particular files from my back up and copy them to the phone directly? Or can I create a new back up file and copy those files to the new back up file. Hopefully I would then be able to restore from the newly created back up successfully since the likely corrupt files will be in the old back up file?
All other information; apps, photos, music and contacts can be re-installed from iTunes.Sigh....
And it just keeps getting stranger! I just disconnected the internet and opened iTunes on my Mac. It opens just fine when disconnected from the internet. iTunes crash seems to be caused when it's trying to connect to iTunes store????
Really need help!
1) Why is iTunes crashing when connected to internet?
2) If I am unable to restore from my back up due to corrupted files within the back up, how can I preserve my text messages, notes and "Quick Voice" app files? -
How do I restore iTunes library from flash drive backup?
How do I restore iTunes library from flash drive backup?
brigdool wrote:
How do I restore iTunes library from flash drive backup?
HI Brigdool,
It depends how you made the backup.
If you copied your entire iTunes folder onto the flash drive, just copy it back to the appropriate place on the computer.
If you copied individual folders or files, add them back to iTunes by inserting the flash drive in your computer, and then dragging the files into your "Automatically Add to iTunes" folder.
The first method recreates your library as it was, with all playcounts, playlists, etc. The second method builds a new library with the same content. -
Mac Projector Crashes When exported From Flash CS5.5
Something strange that i noticed, when i had exported a presentation for a Mac,
on a 64 bit windows 7 using flash cs5.5.
the applicaton gets the paths of a few swfs from an XML file
and loads them one after the other.. there is a small bit of interactivity.
.. tested this projecter on various versions of MAC, it crashes often,crashes earlier if i switch applications. what follows here is a part of a report that was generated on an OS X 10.7.3,
works fine if the projector is exported from flash cs5.
i need it to work when exported from flash cs5.5.. any suggestions on what i need to change in my application so that it works when exported from flash cs5.5?
Your help would be appreciated Thanks in Advance
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000500d98eb
VM Regions Near 0x500d98eb:
Memory tag=240 000000000ebd0000-000000000ec90000 [ 768K] ---/rwx SM=NUL
-->
__TEXT 0000000070000000-0000000070142000 [ 1288K] r-x/rwx SM=COW /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio
Application Specific Information:
objc_msgSend() selector name: orderOut:
objc[9434]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x92115d47 objc_msgSend + 23
1 com.macromedia.Flash Player.app 0x00467d96 main + 240950
2 com.macromedia.Flash Player.app 0x0047efda main + 335738
3 com.macromedia.Flash Player.app 0x002feae2 0x1000 + 3136226
4 com.macromedia.Flash Player.app 0x0033a77b 0x1000 + 3381115
5 com.macromedia.Flash Player.app 0x00462718 main + 218808
6 com.macromedia.Flash Player.app 0x004628b2 main + 219218
7 com.apple.CoreFoundation 0x98e0b3df __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15
8 com.apple.CoreFoundation 0x98e0ad96 __CFRunLoopDoSources0 + 246
9 com.apple.CoreFoundation 0x98e34c68 __CFRunLoopRun + 1112
10 com.apple.CoreFoundation 0x98e3447c CFRunLoopRunSpecific + 332
11 com.apple.CoreFoundation 0x98e34328 CFRunLoopRunInMode + 120
12 com.apple.HIToolbox 0x9289117f RunCurrentEventLoopInMode + 318
13 com.apple.HIToolbox 0x928984e7 ReceiveNextEventCommon + 381
14 com.apple.HIToolbox 0x92898356 BlockUntilNextEventMatchingListInMode + 88
15 com.apple.AppKit 0x98fe8a9c _DPSNextEvent + 678
16 com.apple.AppKit 0x98fe8306 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
17 com.apple.AppKit 0x98fe4675 -[NSApplication run] + 911
18 com.apple.AppKit 0x99278261 NSApplicationMain + 1054
19 com.macromedia.Flash Player.app 0x000032a2 0x1000 + 8866
20 com.macromedia.Flash Player.app 0x000031c9 0x1000 + 8649
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x97d3f90a kevent + 10
1 libdispatch.dylib 0x99a75c58 _dispatch_mgr_invoke + 969
2 libdispatch.dylib 0x99a746a7 _dispatch_mgr_thread + 53
Thread 2:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9232482a pthread_cond_wait + 48
3 com.macromedia.Flash Player.app 0x003ff62f 0x1000 + 4187695
4 com.macromedia.Flash Player.app 0x0001a06c 0x1000 + 102508
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 3:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9232482a pthread_cond_wait + 48
3 com.macromedia.Flash Player.app 0x003ff62f 0x1000 + 4187695
4 com.macromedia.Flash Player.app 0x0001a06c 0x1000 + 102508
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 4:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9237cf7b pthread_cond_timedwait_relative_np + 47
3 com.macromedia.Flash Player.app 0x003ff5f8 0x1000 + 4187640
4 com.macromedia.Flash Player.app 0x001c58fe 0x1000 + 1853694
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 5:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9237cf7b pthread_cond_timedwait_relative_np + 47
3 com.macromedia.Flash Player.app 0x003ff5f8 0x1000 + 4187640
4 com.macromedia.Flash Player.app 0x00305328 0x1000 + 3162920
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 6:: com.apple.audio.IOThread.client
0 libsystem_kernel.dylib 0x97d3cc22 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x97d3c1f6 mach_msg + 70
2 com.apple.audio.CoreAudio 0x9cd8e9fe HALB_MachPort::SendMessageWithReply(unsigned int, unsigned int, unsigned long, unsigned long, mach_msg_header_t*, unsigned int) + 122
3 com.apple.audio.CoreAudio 0x9cd8ea6a HALB_MachPort::SendSimpleMessageWithSimpleReply(unsigned int, unsigned int, int, int&, unsigned int) + 60
4 com.apple.audio.CoreAudio 0x9cd86e5f HALC_ProxyIOContext::IOWorkLoop() + 1145
5 com.apple.audio.CoreAudio 0x9cd86926 HALC_ProxyIOContext::IOThreadEntry(void*) + 136
6 com.apple.audio.CoreAudio 0x9cd86898 __HALC_ProxyIOContext_block_invoke_6 + 20
7 com.apple.audio.CoreAudio 0x9cd8681d HALB_IOThread::Entry(void*) + 69
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 7:
0 libsystem_kernel.dylib 0x97d3f02e __workq_kernreturn + 10
1 libsystem_c.dylib 0x9237accf _pthread_wqthread + 773
2 libsystem_c.dylib 0x9237c6fe start_wqthread + 30
Thread 8:
0 libsystem_kernel.dylib 0x97d3f02e __workq_kernreturn + 10
1 libsystem_c.dylib 0x9237accf _pthread_wqthread + 773
2 libsystem_c.dylib 0x9237c6fe start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00dbe0e0 ebx: 0x00dbe0e0 ecx: 0x99985548 edx: 0x500d98cb
edi: 0x0000036e esi: 0x00aad0e0 ebp: 0xbfffe4f8 esp: 0xbfffe488
ss: 0x00000023 efl: 0x00010202 eip: 0x92115d47 cs: 0x0000001b
ds: 0x00000023 es: 0x00000023 fs: 0x00000000 gs: 0x0000000f
cr2: 0x500d98eb
Logical CPU: 1Looks like it was a memory problem with the jvm.ini file.
Pumped it up to 256 and it works now.
Hope this helps anyone else in the future if they come across it.
Thanks. -
My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!
If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig -
Flash CS4 crashes when dragging image from library to stage
Everytime I'm trying to drag an image from the library to the stage, the program crashes.
I've been sending the crash logs to Adobe many times, but never got any solution from them.
In the log there a line that says:
<crash exception="EXCEPTION_ACCESS_VIOLATION" instruction="0x0c4feb66>
I'm working with 10.0.2, I thought the latest update will fix that, but it doesn't.
Changing the UI from Essential to Classic doesn't help (read somewhere it can help).
Anyone knows what to do to stop these crashes?Yes, did all the updates, both XP and Java.
It looks like it's a library issue. Almost every action I'm doing in the library (drag, copy etc.) causes the Flash to crash.
What can be the problem? -
Firefox 29 crashes restoring from json
Restoring from json causes firefox 29 to hang , try with FF 27 ,also, same problem.
Have used selecting json from list and by "choose file" option. Have tried many different json files. Same problem. Regrettably , I do not have any HTML versions of these bookmarks.
Acording to FF help, I should be able to close the Library window after selecting the restoring bookmark file, but I just get the busy cursor , and clicking on the X (top right of window) results in crash.
Have tried erasing current bookmarks and did a restore , same problem.
Is there any standalone json-to-HTML converter available??Well, this is embarrassing. I guess I do have that many bookmarks since I left the "restore" running and returned to it after several hours , it went through. I am not saying it took that long but probably more than a few min.s .
I guess it is time to do some house cleaning after all these years. I have the list since the Mosaic days , so I guess it gets piled up. Some of the sites are probably defunct.
"Your live bookmarks are in the places.sqlite database,...."
I suspected as much since it is also a large file.
Actually, I manually make copies of the profile folder , not just the bookmarks. Actually the whole user directory so settings of other programmes are saved also.
I will try another restore from another json file after work and make sure it really works , so don't close this thread just yet! -
my iphone 3gs crashed today, if i restore will i lose everything on it?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
Restored from Time Machine backup-Apps hang/crash
I do apologize as I saw there is a similar thread to my problem but I wanted to post mine as it is a little different:
I am still troubleshooting this but I would appreciate any suggestions as well. Last night, my 24" C2D imac became unresponsive and had to had a force shut down. When I rebooted, I got the white apple screen for approx 10 mins.
I then booted from the Snow Leopard CD and did a complete restore from my Time machine Backup. The computer did come back but when I tried to open most programs (Safari, Mail, Itunes, iPhoto) they all unexpectedly crashed. When I looked at the crash log it mentioned something about a java webkit being missing?
Finally I got firefox to open. But the computer would hang every 10 seconds and have a spinning beach ball. It would hang for 10-30 seconds then it would just continue that cycle.
I restarted from the CD again, ran Disk Utility and repaired permissions. I tried running from my hard drive and still had the freezing/hanging issue. I then restored my HD from another TM backup (different time). But still had the same issue
I downloaded the combo update 10.6.2 on another machine, tried reinstalling that to no avail.
I currently am restoring yet ANOTHER TM backup from yesterday morning (since I know that was a good boot).
I dont think it is a hard drive issue because I do have a bootcamp partition, and can boot into that with no problems/issues.
I wanted to ask if there were any ideas of what this could be or anything else I could try? I was thinking about redownloading the java updater and seeing if that helped...
Any suggestions would be GREATLY appreciated. My other question is if I do a clean install of SL, how do I then migrate information over (mail, pictures, music, etc.) from my TM backups?if the restore you are doing now produces the same behavior just reinstall SL on top of it. your TM backups could be corrupt and missing some vital system parts. there have been a number of similar reports by people doing a full system restore from TM in snow leopard. so if the next restore doesn't work boot from the SL dvd and reinstall SL. it will keep your current data but give you a fresh system.
Message was edited by: V.K.
Maybe you are looking for
-
Connecting to Oracle DB on Ubuntu 8.04 using SQL Developer
Hi, I managed to install Oracle 11g on Ubuntu 8.04 using this guide: http://www.pythian.com/blogs/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron But I don't remember the Username or SID, that's why I keep on getting ORA-12505 from SQL DEVELO
-
3D Map - Color Code and Cursor Tracking
Hi, I need some help trying to implement some user interface functionality for a program I am developing. This will be a tuning tool for automotive ECU. The program will be reading in two signals (Y-axis is RPM, X-Axis is manifold pressure) and use a
-
How to Change the Document Condition Values in PO print
HI, I have a requirement to change the document condition values in PO printout. We are using the copied form of MEDRUCK. Please tell me how can i change the Document Condition Values at run time. Thanks....
-
Visited a secure site to renew my membership, but there was no indication on FIREFOX WINDOW that the site was secure. Whereas, when using Internet Explorer the usual padlock symbol was displayed.
-
I have an early MiniMac with OS X 10.4.11. Can I get a free OS upgrade and which version should I choose? Do I just download and over ride the current OS system or what?