[Athlon64] Should i move up to windows x64 bit pro ?

Hi Guys
So, its been about a year since win64bit been around ... and its time for my annual format ... should i, or should i not move up to windows 64bit?
Im sure you all have tried it out again and again ... so what's the verdict? wait a while or lets go!?
Thanks
asmar

when you are content with your current Windows installation, there is no need to move to the x64 version. But, in case you are curious or want to use 64-bit software, you may want to have a dual boot system like Tiresmoke has!

Similar Messages

J2SE 1.4.2 for Windows x64 bit download link

Dear All,
Can any one give me the link to download J2SE 1.4.2 for Windows x64 bit architecture?
Your help is highly appreciated.
Regards,
Syed

There should be no issues with using SAP JVM from the start.
Probably no notes because is straightforward:
- Extract the SAP JVM (e.g. c:\sapjvm_4)
- Set JAVA_HOME (c:\sapjvm_4)
And start installation as per guide.
We have done this recently with Solman 7 EHP1 and NW 7 EHP1 (J2EE stack).
We did have issue on central instance install where the J2EE instance would not start part way through installation (server0 continually crashed and restarted with memory issues) so we had to adjust the instance settings as per SAP Note#1603093, before retrying in SAPINST and continuing.
We had this problem with both Solman & NW 7 EHP1.

Password should not be displayed in Windows 64 bit machine

Hi
I am not sure whether this category is apt for my question.
We have a requirement to mask the password entry in our utility in Windows 64 bit machine.
I was trying to run the following from a 64 bit Windows machine .
@echo off
echo hP1X500P[PZBBBfh#b##fXf-V@`$fPf]f3/f1/5++u5>in.com
echo Enter password:
for /f "tokens=*" %%i in ('in.com') do set "password=%%i"
del in.com
echo.
echo The Password is:"%password%"
This is not working. It works with 32 bit Windows.
Please let us know if you have any other alternative to work in windows 64 bit.
thanks

Thanks, I was pretty sure they should be there, but since I don't use them often, I was in doubt.
I can't think of anything I did to remove the filter gallery - I'm really intrigued about how could it disappear (?). I supposed the 32 and 64 bit version of the 8bf file would be different, but wanted to give it a try just in case...
After wasting some time trying to find the 64 bit "filter gallery.8bf" online, I've decided to just reinstall CS5 and yes, just as you say, now the filters are there. It's a good thing that reinstalling CS5 somehow keeps intact your preferences, workspace and 3rd party plugins! I just had to run the Adobe updater and everything's back to normal.
Thanks for confirming this was an issue! Have a great day.

Weblogic password should not be displayed in windows 64 bit machine

Hi
We have a requirement to prompt for weblogic password in windows 64 bit machine.It should not be visible in the screen while entering the password.
So was trying to run the following from a 64 bit Windows machine .
@echo off
echo hP1X500P[PZBBBfh#b##fXf-V@`$fPf]f3/f1/5++u5>in.com
echo Enter password:
for /f "tokens=*" %%i in ('in.com') do set "password=%%i"
del in.com
echo.
echo The Password is:"%password%"
This doesnt work in Windows 64 bit but works with Windows 32 bit machine.
Does any of you in Weblogic team have implemented similar stuff for working in Windows 64 bit ?
thanks in advance.

Thanks, I was pretty sure they should be there, but since I don't use them often, I was in doubt.
I can't think of anything I did to remove the filter gallery - I'm really intrigued about how could it disappear (?). I supposed the 32 and 64 bit version of the 8bf file would be different, but wanted to give it a try just in case...
After wasting some time trying to find the 64 bit "filter gallery.8bf" online, I've decided to just reinstall CS5 and yes, just as you say, now the filters are there. It's a good thing that reinstalling CS5 somehow keeps intact your preferences, workspace and 3rd party plugins! I just had to run the Adobe updater and everything's back to normal.
Thanks for confirming this was an issue! Have a great day.

Why does audio cut out 10-15 minutes into iTunes movie? Using Windows 8.1 Pro 64 bit

My audio cuts out in any completely downloaded iTunes movie (SD or HD) 10-15 minutes into watching it in iTunes how can I fix this?
I have to shut down iTunes completely and restart it again to get the audio to come back. 10-15 minutes later the audio disapears again.
I am running a Windows 8.1 Professional 64-bit on a PC, 8 GB RAM, ADM Athlon II X2 265 Processor, 3.30 GHz
Running iTunes application version 11.1.3.8
Quicktime 7.7.4 (1680.86)
I tried uninstalling and reinstalling iTunes already.
Any ideas?

Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How should I move all of my Final Cut Pro files to an external drive?

My MacBook Pro doesn't have enough space to hold all of my Final Cut Pro X files (my internal hard drive is only 120GB), and I bought an external hard drive that has 120GB capacity too but want to move all of my FCP files to that drive. What exactly should I be moving? Do I move the application itself? And how do I tell FCP where to find all of my media? Sorry if it seems like a stupid question, I'm relatively new to Macs.
Thanks!

The application remains in the Applications folder.
The best way is to copy the projects by duplicating them to the new drive. Do that from inside the application. Duplicate the projects with all referenced events. When all the projects and media have been copied and are working correctly then you can delete them from your internal drive.
Caution: make sure the media is actually in the events you're duplicating. If not, use the organize events function, or you will lose the media.

Was Not Installed Properly? Windows x64 Bit...

Hello,
I seem to be having a problem installing the latest version of iTunes onto my Windows XP Pro 64Bit Computer...
Once iTunes is installed, everytime i open it i get an error message pop-up, which reads the following...
"itunes was not properly installed. If you wish to import or burn CD's you need to reinstall itunes"
I reinstall itunes, only to get the exact same error. (Ive tried this a number of times now)
What could be the problem?
Many thanks.

Removing iTunes, QuickTime,
http://docs.info.apple.com/article.html?artnum=93698
Also see this for tips about using QuickTime:
http://docs.info.apple.com/article.html?artnum=303706
Apple K.B. articles
Using msconfig to solve conflicts:
http://docs.info.apple.com/article.html?artnum=302538
Tutorial and tips troubleshooting and removal:
http://docs.info.apple.com/article.html?artnum=93976

OS/DB Migration to Windows X64 bit /Oracle 10G from OS400/DB4 V5R4

Hi,
We need to do the OS/ DB migration in BI servers .. Kindly guide me .. what are the prerequesties ?
I think we can achieve this throught Heterogeneous system copy .
Source system    Target system
NW2004 -BI 7.0   NW2004 -BI 7.0
DB4 V5R4           Oracle 10G
OS400               Win2003 x64
SAP kernel 700    SAP Kernel 700
Thanks in advance ..
gnanaprakasam

Hi
You need perform a heterogeneus system copy with sapinst
Chose the sap system->Software Life-Cycle options->system copy->database
And perform in tree steps
export preparation
table splitting preparation
database istance export
It create a export database, and with the sapinst you import in Target system
More info
http://service.sap.com/instguides
Heterogeneous system copy
Regards
William Neira

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

I have a collection of movies on Excel (Windows) that I want to transfer to my Mac. What would be the best software to use. Should I buy Numbers 09 or should I use another application? Is the transfer easy? Thank you for your help.

I have a collection of movies on Excel (windows) that I want to transfer on my Imac . What would you suggest I suse for application? Numbers 09 or any othe suggested application? Is the transfer easy to do?

Hello Claude,
The free Open Office...
http://porting.openoffice.org/mac/download/index.html
Can read Excel & Word files.

10.5.2 iTunes on Windows 7 x64 bit laptop - Quick Time will play videos but not iTunes

I'm hoping you can help, I've looked for a solution to this for a while now.
I store my itunes library on an external hard drive. I completed a clean install of x64 bit Windows 7 on my laptop - all went perfectly. Downloaded and installed the 64 bit version of 10.5.2 iTunes and located my library...the music plays fine but no videos. I opened iTunes in safe mode and it said that I needed the up to date version of Quick Time. Downloaded and installed that...no problems. Now my vidoes will play in the Quick Player but still not in iTunes! They apprear in the "Now Playing" pane but the timer doesn't move - even after pressing pause and play. Can anyone help me please? Do I need to open iTunes in 32 bit mode? If so, how do I do that in Windows 7? i can only find solutions for Mac's....
Thanks in advance

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

ITunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

iTunes 11.2.2 for Windows x64 will not successfully install. Removed prior iTunes, and still will not install. 10.7 installs just fine, but constantly asks to upgrade to 11.2.2. Any Thoughts?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component won't install normally.
If needs be, the Microsoft Program Install and Uninstall Utility (MS Installer "Fixit") may be able to help force through the installation.
tt2

View requests result should open in new browser window

Hello !
I am new in OAF. And I am tired of looking forsolution...
I have a requrement. In the "Request Monitor" page, requests result should open in a new window. It means that each user's click on "View request result" should open in a new browser window.
I have found url like this in access.log:
OA_CGI/FNDWRR.exe?temp_id=1069558080
This url returned from package : fnd_webfile.get_url. And this package is used in about 30 java files...
And I do not know which one of these files is used in my page...
Finally, I want to add ' target="_blank" ' to result html code. Like this:
Maybe It can be done a more simply way?
Thank you!
P.S. Here java files:
Which one is used in "Monitor Request"???
oracle\apps\az\util\CpLogViewUtil.java
oracle\apps\fnd\cp\fileops\
FileConstants.java
FNDFSFileFetch.java
oracle\apps\fnd\cp\request\
RemoteFile.java
oracle\apps\fnd\cp\util\
RemoteFile.java
oracle\apps\fnd\cp\viewreq\server\ViewRequestAMImpl.java
oracle\apps\fnd\oam\bizexcep\handlers\
BflowContextDetailsHandler
oracle\apps\fnd\oam\bobj\activity\
FRDLog.java
oracle\apps\fnd\oam\bobj\adconfig\
AppsCtxtCompFileList.java
AppsCtxtFiles.java
oracle\apps\fnd\oam\bobj\manager\crm\
CRMProcessLog.java
oracle\apps\fnd\oam\bobj\manager\views\
ICMProcessLog.java
ManagerProcessLog.java
oracle\apps\fnd\oam\bobj\requests\views\
RequestView.java
oracle\apps\fnd\oam\cp\fileops\
FileConstants.java
FNDFSFileFetch.java
oracle\apps\fnd\oam\launchMode\restricted\handlers\
RestrModeHandler.java
oracle\apps\fnd\oam\sdk\util\files\
FNDFSUtil.java
oracle\apps\fnd\oam\sdk\util\log\
LogHandler.java
oracle\apps\fnd\oam\sdk\util\support\
AppsSignatureNode.java
oracle\apps\fnd\oam\servlet\ui\handlers\activity\
DatabaseSessionHandler.java
FRDFilesListHandler.java
FrmSessionHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\adconfig\adv\
AdvCfgNode.java
oracle\apps\fnd\oam\servlet\ui\handlers\debugwb\
SearchPGHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\gsc\
SvcCompDetailsHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\request\
CpRequestHandler.java
oracle\apps\fnd\oam\servlet\ui\handlers\services\
ServiceProcHandler.java
ServiceStsHandler.java
oracle\apps\fnd\wf\oam\bobj\util\
WfQuery.java
oracle\apps\fnd\wf\oam\handlers\
WfComplWorkItemHandler.java
Edited by: rsn on 01.12.2010 15:43
Edited by: rsn on 01.12.2010 15:46
Edited by: rsn on 13.05.2011 11:27

Anand, thank You very much!
"In your page, is "View request result" a link ?
If yes then
click on "Personalize Page" link which is at the top right corner of the page. Select "Complete View" radio button and click on "Expand All" link. Search for item "link". If your page has more than one link then choose the link item which is related to "View request result". Click on "Personalize" pencil icon corresponding to "link" item/region. Change the "Target Frame" property value to "_blank" under "Site" level. Click on "Apply" button.
-Anand"
This is a great power in "Personalize Page"!
I make solution in this steps:
1. Activate personalization to user, by setting profile "Yes" value on user level:
Personalize Self-Service Defn / FND_CUSTOM_OA_DEFINTION
2. Personalize 2 regions items (Image & Link)
( Don't ask me how !!! ;)
Image have not Target Property. I move URI to Link Region Item and remove in step 4 from Image Region Item.
3. Export page and my region
java oracle.jrad.tools.xml.exporter.XMLExporter /oracle/apps/fnd/cp/viewreq/webui/CPViewRequestPG -rootdir $APPL_TOP/personalizations -username apps -password *** -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))"
java oracle.jrad.tools.xml.exporter.XMLExporter /oracle/apps/fnd/cp/viewreq/webui/customizations/site/0/CPViewRequestPG -rootdir $APPL_TOP/personalizations -username apps -password ***-dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))"
4. Modify in notepad /oracle/apps/fnd/cp/viewreq/webui/CPViewRequestPG.xml (remove URI from Image Region Item) from this file.
5. Install script script for PROD like this:
cp -R personalizations $APPL_TOP
java oracle.jrad.tools.xml.importer.XMLImporter $APPL_TOP/personalizations/oracle/apps/fnd/cp/viewreq/webui/CPViewRequestPG.xml -username apps -password *** -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))" -rootdir $APPL_TOP/personalizations
java oracle.jrad.tools.xml.importer.XMLImporter $APPL_TOP/personalizations/oracle/apps/fnd/cp/viewreq/webui/customizations/site/0/CPViewRequestPG.xml -username apps -password *** -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp) (host = localhost)(port = 1521)))(connect_data = (sid = prod)))" -rootdir $APPL_TOP/personalizations
6. After install on PROD, You need to "bounce the apache". Additionally, it need to modify / upply button once on a region link. Right now I can not explain exactly, how it helps... But finnaly changes after 'XMLImporter' command will applyed after modify / upply manipulations.
Edited by: rsn on 13.05.2011 11:16

Windows 7 x64 bit and iTunes not recognizing iPhone 3GS

Hello,
I'm sorry to bring this up again and I know the community has seen it a million times but I'm definately needing someone to point me in the right direction. I have an Acer 5552 Laptop with Windows 7 x64 bit. It does not have the Intel P55 chipset as what I have read before in these discussions, so updating the BIOS will not work. I have tried uninstalling and reinstalling iTunes x64 bit, removed and reinstalled the drivers and Apple Mobile Support software (which should do it by removing iTunes as a whole) and whenever I hook my iPhone to my laptop for a second sync it takes a long time to back up and then it gives an error, then when i try to connect it again iTunes says that the iPhone cannot be recognized and needs to be restored. I have done this 3 times in the past 2 months. This is a brand new laptop that I have. There should be no reason for this to happen unless I'm missing something. Is there any workaround to this? for the time being I'm syncing everything on an old, slow desktop that has Windows XP. It's worked with my old laptop which had XP on it great but sadly I gave my old laptop to my dad which he now uses to sync his iPhone with now.
Any help would be greatly appreciated..also if anyone has the same laptop model I have and have Windows 7 x64 on it..please let me know what you did if you got your 3GS to sync all the time with no problems.
Thank you very much.

4 days and no response...really??

Windows 8.1 standad (not-Pro/Enterprise) x86 and x64 bit client support

Can someone from the team please clarify if Windows 8.1 standard (not pro/ent) x86 and x64 computers are supported as full Intune computers?
I want my small business customers who have BYOD (home computers) that have Windows 8.1 standard (NOT RT) be monitored, managed, AND have the same anti-malware system as the Windows 8.1 Pro/Ent computers.
This was clearly (and surprisingly) addressed at the Build 2013 conference this year in San Francisco when Intune and OpenMDM was discussed but the updated TechNet pages such as
http://technet.microsoft.com/en-us/library/jj676630.aspx show that Pro/Ent is required.
Is there another Intune service update coming that adds support for home computers, is the documentation wrong, or did I misunderstand the keynote and the answers to my follow up questions from that event?
Thanks!
-Neil
neilgo

Jon,
Can you address if there is technical issue or if this is a licensing/policy issue?
I have a lot of prospects who do not have licensing with Home Use Rights - not to mention the management and licensing control of home use rights of the OS is not "cloud controlled". (i.e. nothing easily in place that offers the level of control that say
Office 365 Pro Plus - which handles provisioning/activation AND deactivation should someone leave the company).
I find the message hard to explain to customers that home computers running Windows 8 standard clients can't support/run software that Windows 8 Pro clients can. There was a body of messaging that took years to build up about the advantages of domain
joined clients needing to be "Pro or higher" but in this case the message don't ring correct given we are talking about "personal owned" rather than company owned devices.
How do I explain that as far as Windows Intune is concerned that Windows 8 standard computers and iOS tablets are the same?
neilgo

[Athlon64] Should i move up to windows x64 bit pro ?

Similar Messages

Maybe you are looking for