Athorization Object for User Parameter ID

SAP gurus:
In the project, we have introduced a Z_ user parameter.
And users are allowed to flag this parameter on / off via su01 transaction.
The question is: can we link user-parameter with authorization objects?
In that case, we could further set-up authorizations to restrict which user-group can use this parameter
and which group can not.
Best regards.
Vincent

Hi,
Please maintain a table which has got fields : User Id and Parameter Status (on/Off)
Then you can put a restriction based on the values present in these table for any program.
Please check the below link :
http://help.sap.com/saphelp_40b/helpdata/en/e5/164b6e5733d1118b3f0060b03ca329/frameset.htm
Regards
Sreedhar Reddy

Similar Messages

  • Table for User Parameter IDs

    Hi All,
    Does anyone know the Table for User Parameter IDs?
    Thanks in Advance

    Hi Duke,
    USR01                          User master record (runtime data)
    USR02                          Logon data
    USR03                          User address data
    USR04                          User master authorizations
    USR05                          User Master Parameter ID      
    Regards,
    Ashok

  • Business object for user master in SAP

    Is there a standard business object for User Master in SAP?
    Somehow I just could not find it.
    Thanks.

    Hi Jeff,
    I think the BOR - USER should do your purpose.
    Regards
    <i><b>Raja Sekhar</b></i>

  • Failed to reconcile provision object for User

    Hi,
    I am doing RACF reconciliation for users.
    But reconcilaition events are in Event Received state.
    If I try to reapply th recon matching rule.
    Exception is Failed to reconcile provision object for User.
    any pointer?

    Once Verify reconsilation Data, specially which are mandatory for User.

  • Application object for users to request remote assistance

    Hi
    I want to lock down my users' desktops by changing the Windows shell to Application Explorer but still want my users to be able to request a Remote Assistance session with the list of pre-defined operators.
    I have my policy setup and my users' can go to the Remote Management section of the Adaptive Agent and from there, request a remote assistance session.
    How can I do this without my users' having to go to the properties of the Adaptive Agent?
    Thanks
    rdc

    rgdacosta,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Using user parameter for

    Hello,
    I have created a report using an xml pds. I am using a servlet for the xml data stream source. Everything works great with the url to the servlet hard-coded between the <xml></xml> tags (ex. <xml>http://10.3.35.119:9004/ssapp/servlet/ScheduleDataServlet</xml>) but when I try using a user parameter between the tags (so I will be able to dynamically change the url to this servlet) it bombs. Please see my source code and error message below. Any help would be greatly appreciated, I've been stuck on this for days! Thanks!
    <rw:report id="recoveryCenterScheduleReport" parameters="server=myreportserver&userid=ssstage/ssstage@DEVL&p_xmlDataURL=http://10.3.35.119:9004/ssapp/servlet/ScheduleDataServlet">
    <rw:objects id="objects">
    <?xml version="1.0" encoding="WINDOWS-1252" ?>
    <report name="XMLscheduleReport" DTDVersion="9.0.2.0.0">
    <xmlSettings xmlTag="XMLSCHEDULEREPORT" xmlPrologType="text">
    <![CDATA[<?xml version="1.0" encoding="&Encoding"?>]]>
    </xmlSettings>
    <data>
    <userParameter name="XML_HTTPS" datatype="character"
    pluginClass="oracle.reports.plugin.datasource.xmlpds.XMLDataSourceFactory"
    width="255" defaultWidth="0" defaultHeight="0" display="no"/>
    <userParameter name="p_xmlDataURL" datatype="character" width="100"
    precision="10" defaultWidth="0" defaultHeight="0"/>
    <dataSource name="QP_1">
    <plugin
    factoryClass="oracle.reports.plugin.datasource.xmlpds.XMLDataSourceFactory"
    majorVersionNumber="1" minorVersionNumber="2"
    signOnParameter="XML_HTTPS">
    <![CDATA[<xmlpds DTDVersion=" 1.0">
    <dtd>null</dtd>
    <schema>file:///C:/Practic Workspace/Practice/WEB-INF/xsd/scheduleReport.xsd</schema>
    <XSQLschema>null</XSQLschema>
    <XSQLWithDTD>false</XSQLWithDTD>
    <type>false</type>
    <xmlWritten>true</xmlWritten>
    <validate>true</validate>
    <xml>&<[b]p_xmlDataURL></xml>
    <xsl>null</xsl>
    javax.servlet.jsp.JspException: rwlib-1: REP-0002: Unable to retrieve a string from the report builder message file.
    REP-0069: Internal error
    XMLPDS-63004:Generic error while parsing the URL stream name instead of <.
    REP-4111: Fail to create pluggable data source 'QP_1'
         at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
         at jsp.reports._schedule._XMLscheduleReport._jspService(_XMLscheduleReport.java:87)
    ....

    Never mind, I discovered the problem. I wasn't using the necessary xml escape characters for the user parameter embedded in the xml.

  • Authorization object for Parameter ID EFB

    Dear Team,
    How can we develop an Authorization object for Parameter ID.
    Apperciate ur assistance on this.
    Regards
    Zulfikar

    SAP menu-->system >user profile>Own data
    Maintain user profile  select Parameters Tab
    here enter parameter ID EFB and parameter value X or aa(whatever u crated name) and save user profile.

  • When sharing iMovie11 project  with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list).  Finalize issue?

    When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error  occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
    Option File - Finalize Project gives inmediately the same errormessage.
    Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
    Please advise, thank you!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Crystal Report Templates for User-Defined Objects

    Hello Experts,
    I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
    Any help would be appreciated.
    Thanks,
    Praneeth

    If this is still a problem please re-post to the SAP Integration Kit forum.

  • How to activate all inactive objects for current user

    Hi
    How to activate all inactive objects for current user ...
    ... I have found a (long winded) way to do this:
    - Environment / Inactive Objects
    - Add to Worklist
    - Display Worklist
    - Select All
    - Activate
    this will open a dialog titled "Inactive Objects for <username>"
    which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
    the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
    does anybody know the TCode for this dialog?
    thanks
    ps does the term "mass activation" apply to importing change requests rather than development activation?
    Edited by: FireBean500 on Jun 4, 2010 11:07 PM

    No other way. But usually it's far more simple as all objects are already in our own worklist.
    I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

  • Is there configuration to have message for users when a spec object is already open for edit?

    We are on v6111 and appreciate the warning message that tells the second user when two users have editted the same spec object and changes of the first have already been saved.  What we are coming up against is users who want to know that someone else has already opened the spec object for edit.  Is there a configation for this?  Users don't like being informed after they enter data that someone else already saved a different edit ... they would like the warning before they do the actual work because it feels like a wasted effort ... If warned up front, they can come back and do the data entry later.  We are trying to find the appropriate configuration option to put the warning message in the appropiate UX process/timing.  Thank you!

    Hi Beckie,
    Sorry, but there is no out-of-the-box configuration to show this type of message.
    Regards,
    Ron

  • Im trying to share a project to idvd and gettingThe project could not be prepared for publishing because an error occurred. (Error in user parameter list) what does this mean

    I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING"
    "The Project could not be prepared for publishing because an error occured (Error in user parameter list)
    Does anyone know why this is happening and what I can do to fix it?
    Thanks!!

    Can you give more details?   What exactly is the entire error message text?  there should be an error number too.   Are you trying to finalize this to an external disk?

  • I keep getting this message from Imovie: Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

    I keep getting this message from Imovie:
    Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)

    Bartirn,
    I called Apple under my Mac support contract.  They were completely unfamiliar with the error you and I were encountering.   Updating to 10.8.5 didn't help.
    I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
    B

  • HT2479 Ok so imovie 11 won't let me export my movie anywhere, no matter what it seems. all it says is he project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list).

    Any help would help.

    Hi
    Error -50 paramErr  - Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ?
    Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    • free space on internal boot hard disk? How much ?
    Video codec
    • streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    Corrupted preference file: The "com.apple.iMovie.plist" file - trash it
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Klaus1
    You need more free space on your hard drive.
    Where do Your material come from
    • Camera
    • External hard disk
    • USB-memory
    And all are connected so that iMovie can find it ?
    from: jonorparkerjon
    After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
    from Karsten S
    Shorter clips than 1,5 sec might be one of the culptrits
    Bengt cont.
    Set-Up might differ
    • Mac OS - most probably X.7 or more
    • iMovie version - more than iM'11 v. 9.0.4
    Action taken
    • Finalizing project - I never do as I never understood the gain to do so
    • Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
    fps - set
    •  I only use PAL (25fps
    Yours Bengt W

  • Unable to prepare project for publishing. Error in user parameter list

    After editing the project in iMovie '09 I am getting strange problems.
    1) If I try to share the project to iDVD I get the Error Message: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". The same error message I get when trying to "Export Movie".
    2) If I play the movie (either in the preview window or in full screen), I hear the audio, but the video remains on the picture, I was, when I start playing. This wasn't the case until yesterday. I don't know, what has changed this.
    I am not sure, if both problems are connected.
    If I try to play a clip, everything still works well, means audio and video are playing as expected.
    Any ideas, what I could try to solve this (I already tried to restart iMovie, checked that I have the newest version 8.0.1 (740) and tried to restart my iMac?
    Leela

    I'm having the same problem, though it wasn't triggered by me importing anything. I had an almost complete project that I was just editing down and tightening up. I was making some deletions and moving some clips around when the project just went all wonky. If I hit the space bar the video will play. Audio, video and titles are all as they should be. But the editing window is frozen. The raw clips have disappeared from the upper left. When I restart the app the editing window is sometimes blank. But if I drag another application across the screen (like Mail or iTunes) the clips regenerate in the viewer window. This is a HUGE disappointment for me. After wasting an hour trying to solve this I now have to start completely from scratch with this project.

Maybe you are looking for