ATI 1900XL and Mac Pro (SHIPPING TIME?)

When the Mac Pro came out. I read that it took a very
long time to get it delivered if you ordered a ATI
1900 w/the Mac Pro.
Is this true today? Will it take a month? A week?
What?
I just ordered it. And put in ship overnight. Did I
waste my P&H money?
It said 2-3 days last time I checked. Your order status should show you the estimated Ship Date and Delivery Date.
I have used 2-day and overnight shipping from Apple and always got my money's worth. Both my recent Macs were delivered ahead of schedule.
Steve

Similar Messages

ATI 5770 and Mac Pro 3,1 question

I've seen this topic discussed in various ways here. Still don't get it (and I'm not usually this dense). Trying to install 5770 in Mac Pro, 2008. Several posters say they are doing well with that configuration. I'm running 10.6.8. Mac does not recognize the card, and the fan on the card does not spin. Are there drivers I need, a Pref Pane I need (there's one in my System Prefs now, but apparently it is very old and for non-Intel Macs...where it came from, I don't know). Step by step, what do I have to do to get this card to work in my Mac? Tried to piece the info together from various other threads, but it it inconsistent and incomplete (for my purposes). Thanks!

Trying to install 5770 in Mac Pro, 2008.
Is that a apple version of the 5770?
Several posters say they are doing well with that configuration. I'm running 10.6.8. Mac does not recognize the card, and the fan on the card does not spin.
That's an electrical/mechanical problem. Nothing to do with drivers. Fan should spin. I'm currently on my 3rd 5870 card because the fan would not always start up. Bad baring? Bad lubrication? Weak motor? Fan hitting it's container? Who knows?
Are there drivers I need, a Pref Pane I need (there's one in my System Prefs now, but apparently it is very old and for non-Intel Macs...where it came from, I don't know).
Drivers should be included with 10.6.8. No prefpanes.

Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

2007 mac pro some time take 5 attempts to start

2007 mac pro some time take 5 attempts to start

I would insert your original Installation disk and run the Extended Apple Hardware Test (AHT) to help diagnose the problem.
Hope this helps

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
Thanks

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

Arp aging time on router and mac address aging time on switches set close t

Hi,
appreciate some advice on the following:
what is the benefit of setting arp aging time on router and mac address aging time on switches close to each other?
Thanks,
Christina

Hi,
based on the below output, do you think implementing it will benefit? Thanks.
C2950#sh int fa0/43
FastEthernet0/43 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 000d.5e11.4e2b (bia 000d.5e11.4e2b)
MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec,
reliability 255/255, txload 7/255, rxload 2/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s
input flow-control is off, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 933000 bits/sec, 149 packets/sec
5 minute output rate 2981000 bits/sec, 263 packets/sec
2819781393 packets input, 3782332886 bytes, 0 no buffer
Received 266693 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
4015025747 packets output, 2328228393 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
C2950#

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
Matt

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

Why must I restart my mac pro each time I want to see my iPhone in iTunes

Macbook pro Mid 2012, 2.5 GHz, 16GB, 500 GB,
Why must I restart my mac pro each time I want to see my iPhone in iTunes?

Did you already try the troubleshooting in this article?
iOS: Device not recognized in iTunes for OS X - Apple Support

New to MAC - trying to sync iphone and Mac Pro with imac

Hi,
Just made the switch to Mac. Purchased my Mac Pro yesterday, loaded .Mac, and plugged in my iPhone to the computer. Followed the steps to Sync iCal and contacts from iPhone and although it is registering there is a phone and downloading photos, it is not syncing anything else.
The steps I took were System Preferences, .mac, and checked the relevant boxes. It indicates syncing is taking place but the calendar on iPhone and Mac Pro are not syncing.
Could anyone help with advice? SHould I be able to sync easily between the iPhone and the Mac Pro with .mac?

You use iTunes to sync an iPhone - not *.Mac Sync* or iSync.
*.Mac Sync* is for syncing between Macs, and iSync is for syncing third-party mobile phones and PDAs.
The iPhone specific forums are here:
http://discussions.apple.com/category.jspa?categoryID=201

HT201380 keep having scrolling problems with Maverick on both iMac and Mac Pro despite downloading mail software update

Have scrolling problems with Maverick despite downloading mail update on both IMAC and Mac Pro
Have to reboot and it helps for awhile then stalls again

The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) "Mail now supports connecting to mail servers through a SOCKS proxy". This probably has nothing to do with your problem, but it'd be worth going to System Preferences > Network and making sure the SOCKS Proxy is not enabled in the network configuration used to connect to the Internet.
Also, it looks like the crashes you're talking about are actually freezes, i.e. Mail becomes unresponsive rather than quitting unexpectedly. In Mail, open Window > Activity Viewer, and see whether Mail displays there what it's doing when it freezes. Actually, you may be able to avoid having to force quit Mail by canceling whatever it's doing (by clicking on the red stop icon of the activity).
Reinstalling Mail will probably accomplish nothing, but it might be worth reinstalling the Combo Update for the type of machine and the version of Mac OS X you're using (which you would have to do anyway if you wanted to reinstall Mail):
Mac OS X 10.4.7 Combo Update for Intel
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, and no applications should be running while installing it.

If a reinstall my mac pro with Time Machine the sounds in the sound menu don't play if i click 2 times in the menu. if i reinstall mountain lion afther that it works normally does anyone now what the problem is?

hay
I working from the beginning with fcpx i have fcp3 to
But i have a problem with the sound effects in fcpx they dont play in the menu of fcpx if i reinstall my mac pro with time machine
It is working again afther reinstall mountain lion.
is there someone with te same problem or dus sombody now wat the problem is of this.
Or is this a iseu of time machine ?
i never had that problem with OSX lion
Thanks

Try getting the free "Preference Manger" applicaiton from Digital Rebellion (dot com). Use it to trash the FCP X preference files. See if that helps.
Also, on the new Mac, go into the App Store, under the Store menu, make sure you are signed in.

PC and MAC at same time

can this function as drive for PC and MAC at same time?

Yes. Ignore the drive's formatting.
(62296)

Are the Nehalem Mac Pros shipping?

Hi.
Are the new Nehalem Mac Pros shipping? I don't see any signs, reviews.
Did anybody get theirs?
W.W.
(I don't know if this is the right place to ask this question?)

Hi W.W.;
http://www.barefeats.com/nehal04.html
http://www.barefeats.com/nehal03.html
http://www.barefeats.com/nehal02.html
http://www.barefeats.com/nehal01.html
Allan

ATI 1900XL and Mac Pro (SHIPPING TIME?)

Similar Messages

Maybe you are looking for