ATI 2600 Driver Update - Windows Vista

So, when in Windows mode I need to go to ATI's website and update the drivers?
Message was edited by: Freis1968

Hi,
no, in fact you have one computer with two hearts (operating systems) in you Mac Pro and these hearts are operating completely independent from each other.
When you are running OSX, you have an Apple Mac.
When you are running Windows, you have a Windows computer.
When you are using your MAc Pro, you HAVE FUN (at least I have...)
Stefan

Similar Messages

Boot Camp: Driver Update (Windows Vista SP1)

I'm running a dual boot MBP Unibody w/ OS X & Vista SP1 64Bit
I don't like to install Boot Camp in the Windows OS due to the fact that updating drivers can be a pain when installed via boot camp. However, since I've done so, I've lost the functionality of some of the hardware.
If anyone can point me to a place where I could find drivers for the following I would greatly appreciate it. If I dont get a response, I will attempt to manually extract the drivers from the OS X Install CD.
Drivers Needed:
Express Card 34 Slot (The Drivers needed to get the slot to work, regardless of card)
Apple I Sight Built in Camera
IR Receiver
Trackpad
System Specs:
17" MBP Unibody
Windows Vista SP1 64Bit
2.93 / 4GB / 9600M GT
Sonnet Tempo eSata Express/34 Card (Rev. A) (I have the drivers for this, but the card isnt recognized when placed in the MBP)

you must run system 1 dvd where bootcamp is, open folders and there choose driver/64bit ..
no choose witch one you like and install with right-click as problem or something like this.
you take working with vista sp1 before and so on ..
i run 64bit win7 rc1 with all drivers exept isight.
for more look here:
http://forums.macrumors.com/forumdisplay.php?f=86

N91 driver issue ~ Windows vista !

Hey there !
N91 driver issue ~ Windows vista !
i recently upgraded my OS fro XP pro to vista ultimate,
carrying all the program files and settings,
but then the nokia pc suite in vista didn't recognize or load drivers for N91, when connected as
(1.) pc sync
(2.) USB hdd.
so in -all pc suite wasn't running.
so i uninstalled and re-installed pc suite,
now it does connect and loads drivers when connected as
(1.) pc sync
but doesn't loads drivers (keeps on searching~ from CD and windows update) as a USB HDD,
so I can't drag and drop my files in it.
any solution to this !

The combination is complicated - VISTA / PCSuite 6.83...
Both are not reference of good behavior.
On Vista, miss a lot of drivers, even for N91, and PCSuite 6.83 is unstable and unreliable. So maybe, you don´t have a problem, and need to leave with that until both, or at least one of then have an upgrade.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

HP Photosmart C4680 driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

C driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Link to download Realtek Audio Driver for Windows Vista ?

Hi All,
Could you pls let me know the exact link to download Realtek Audio Driver for Windows Vista ??
I am having A 200 Satelite model with promblem of disorted & crackling sound.
So wanted to try reinstalling this driver.
Thanks in advance.

The latest Realtek drivers can be found at either of these two links.
Realtek Driver Download: http://www.realtek.com.tw/downloads/
Or from Major Geeks: http://majorgeeks.com/download.php?id=35 (Realtek drivers are two thirds of the way down the page).
You will need to know which Realtek driver you need for your laptop. I.e., the Realtek HD Audio or the Realtek AC'97 version.

Adobe ps printer driver for windows vista. Where can I get it?

I need Adobe ps printer driver for windows vista. Where can i get it? Plz help me. If yes, then where and if no, why?
Any help is highly appreciated.
Thanks.

The Acrobat printer produces a PS file that is then sent to the Distiller process to create a PDF. The other PPD you mention is something I know nothing about. However, why would you want to use a different driver? The Adobe PDF driver is optimized for use in creating PDF files and other routes may not produce as good of a result. If the other PPD produces a PDF, then why are you asking about the Adobe driver?

Sr5604f updated windows vista but now it reboots the config over and over

need hip,,pls help sr5604f updated windows vista but now it reboots the config over and over

need hip,,pls help sr5604f updated windows vista but now it reboots the config over and over

Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Greets

Satellite A100 (PSAA9) Display Driver for Windows Vista

Hi Everyone,
This link doesnt work so I didnt install my display driver for Windows Vista and system performance look really terrible. I wondering nobody use Satellite A100 (PSAA9) and Windows Vista. Because I was searching this driver on internet but i coudnt fint it anywere. This situation made me so sick.
How can I warn or send e-mail to Toshiba customer support about broken link. Or anyome know direct download address for Vista driver? Please help me asap :(
15/02/07 Display Driver nVidia Windows Vista 97.54
Thanks for your help,
Mehmet from Istanbul

Hi Daniel,
Thank you for post and advise. I downloaded Satellite P100 (PSPA0E) nVidia display driver but it doesnt work. Its look same but problem is doesnt support my display card. Its really strange and Toshiba doesnt fix yet :S
15/02/07 Display Driver nVidia Windows Vista 9.7.5.4 World Wide
http://support.toshiba-tro.de/tools/vista/nvi/display-vista-9754.zip

Need help installing my graphics driver in windows vista via boot camp

New to mac so first time on forum as well.
Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
I am currently using below.
Mac mini Mid 2011 processor 2.5 GHz Intel Core it
Memory 4 GB 1333 Mhz DDR3
Graphics AMD Radeon HD 6630M 256 MB
Software Mac OS X Lion 10.7.5
Installing windows vista home premium 32 bit
I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
Advise?
I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
What is the driver i need to install to get these games working? What do I need to do or what am I missing???
Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
Any and all responses will be greatly appreciated i have been at this everyday for hours.

Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

Hp pavilion dv5 driver updates windows 7

Begging for help:
I have recently changed my system operation from windows vista to windows 7 . but my laptop doesnt recognize some of drivers. and I'm not able to update the drives as windows doesn't know them. what can i do to solve my problem?
I couldnt find driver updates for windows 7 on hp website.
Tnx in advance
This question was solved.
View Solution.

Hi,
Can you post back with the following details.
1. The full Model No. and Product No. of your dv5 series notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to install RAID driver in Windows Vista on Qosmio G35-Av600?

I have the Windows Vista Home Preminm Upgrade Pakage. When I start the insallation process, the setup asks for Toshiba Raid Driver. So I click in Load Driver button and choose the folder where the driver is in, as said on the guide, but the setup says that there is no driver found for this drive.
What is the reason and what is the solution?

Hi
Did you choose the right RAID driver???
It seems this Qosmio notebook was designed for the US market and therefore you should download the driver from the US page:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
There is RAID driver designed especially for the Vista. At this time its 1.10.0016 version.
Please note that you will have to extract this file before installing the RAID driver!!!

Dolby Home Theater V4 changed to Dolby Digital Plus after Realtek Audio Driver update Windows 8.1

Hi,I'm now using Ideapad Z510. After upgraded to Windows 8.1. I'd went to the Lenovo website searching for new driver update.
But, after i install the "Realtek Audio Driver 6.0.1.7023", the "Dolby Home Theater V4" is not running(audio sound not playing through).And, the "Dolby Digital Plus" is running instead of "Dolby Home Theater V4".
Then, when I try to reinstall the older version "Realtek Audio Driver 6.0.1.6954" from Lenovo website, the "Dolby Home Theater V4" is running again.
Truly, the "Dolby Digital Plus"'s sound is crisper and louder than "Dolby Home Theater V4". But the sound of "Dolby Home Theater V4" has more bass and more function (like Graphic Equalizer, more Intelligent Equalizer etc.).
Is this an update or what?
What should I choose?The newer driver (for Windows 8.1) or older driver (for Dolby Home Theater V4)? Thanks. (confused now) @@

Hi all
Could you try out DAA or DHTLightweight from my link and just install the Dolby software without overriding your Realtek Driver? I am not sure whether would it work, but worth a try. I have tried on Y460, W520 and G560 with great experience.
If the older Dolby software does not work with your existing Realtek driver, you could install the DAA or DHTLightweight with their driver to overwrite and see how it goes.
Thank You
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300 | Yoga Tablet 2 Pro
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

ATI 2600 Driver Update - Windows Vista

Similar Messages

Maybe you are looking for