Ati 4890 - xorg 1.7.2 - catalyst?
well , hello everyone i had an idea and i want your opinion ,
i have ati 4890 graphics card and i wondered if i can install the catalyst drivers..(i know that arch dropped support since xorg 1.6) and i dont want to experiment with compiling kernels and downgrades (yet)
, so here is my idea , what about if i download the official ati drivers from amd's site and install them.. , it says that the support the current 1.7.2 xorg , will this work for me?
i'd love to hear your opinion:)
on the other way , am i going to be ok with radeon hd drivers?(if i don't make it with catalyst)
thanks for your time:)
The catalyst driver does not support xorg 1.7 yet, and probably won't for some time. (my bet is no support until the next ubuntu release, that's what happened the last two times )
You probably want to read trough and follow this thread: http://bbs.archlinux.org/viewtopic.php?id=57084
The free xf86-video-ati and -radeonhd drivers have partly support for the card. 2d should work, 3d will be limited.
Edit: Do _not_ download and build directly from amd.com. Always use makepkg/pacman or you will just end up in a world of pain.
Last edited by Mr.Elendig (2009-12-04 17:16:40)
Similar Messages
-
Xmonad, xorg 1.9, and catalyst-test
Hi guys,
I'm running xorg 1.9 and catalyst-test on my HP Envy 15 (which contains a Radeon Mobility 5830.) Almost everything works; nothing strange appears in /var/log/Xorg.log or glxinfo. It's clear that my hardware acceleration is fine because I'm getting 200+ FPS in Extreme Tux Racer.
However, xmonad, of all things, is super-slow. When I switch workspaces or spawn tiled windows, the redraw lag is quite visible and I can see my CPU spike.
Amid other reports of X problems, I tried installing the backclear/catalyst-maximize-fix xserver packages from the catalyst repository, but those didn't seem to help. I also tried flipping the bit to enable XAA 2D acceleration, and that didn't seem to help either.
Any ideas as to why X doesn't seem to be accelerating this properly?Yeeees, catalyst isn't supporting xserver 1.10 atm. Maybe 11.3 will support it, maybe.
Workaround is to:
- add xorg-server-* and xf86-input-* packages which you installed into pacman.conf's IgnorePkg list
- OR use [xorg19] repo - read wiki . -
hey everyone im running a K9N2 Diamond Mobo Phenom II X4 BE 940 CPU 8G Corsair RAM 1000W PSU & an ATI 4890 Diamond Video Card. theres a time that my pc stop working pc hangs or it turns blue & restart the system after that windows load & it says that theres something wrong with my Video Card it also tells me to update my Video card driver & i did & still im getting random crash. i read some post that has almost same problem that i got but they are using Nvidia cards. does that mean that my ATI card is not compatible or not working properly on my board?
sorry for the late reply guys was busy at work ok now heres the specs of my pc:
Corsair XMS2 8GB PC6400 DDR2 800MHz Memory Upgrade - 4x2048MB
HITACHI 1TB SERIAL ATA HD 7200/16MB/SATA-3G
AMD Phenom II X4 940 Black Edition Quad Core Processor HDZ940XCGIBOX - 3.00GHz, 6MB Cache, 1800MHz (3600 MT/s) FSB, Deneb, Quad-Core, Retail, Socket AM2+, Unlocked Multiplier, Processor with Fan
Samsung SH-S223B/BSBE 22X DVDRW Drive SATA OEM
XION Power Real 1000W ATX Power Supply
+3.4V 24A
+5V 30A
+12V 1 20A
+12V 2 20A
+12V 3 20A
+12V 4 35A
+12V 5 35A
+12V 6 20A
+12V Rails 6
-12V 0.5A
+5VSB 5.0A
Diamond Radeon HD 4890 Video Card - 1024MB DDR5, PCI Express 2.0 x16, CrossFireX Ready, (Dual Link) Dual DVI, HDTV
lock up still happens even though im not playing any games
-
Xorg Fails to Start (Catalyst 13.11 Beta)
Hello,
I have just installed the new catalyst 13.11 beta drivers. I blacklisted radeon, enabled nomodeset, and disabled kms. When I start X it gives me the "oh no something has gone wrong..." screen. Here is my X log
[ 778.047]
X.Org X Server 1.13.4
Release Date: 2013-04-17
[ 778.134] X Protocol Version 11, Revision 0
[ 778.163] Build Operating System: Linux 3.8.10-1-ARCH x86_64
[ 778.193] Current Operating System: Linux localhost 3.10.9-1-ARCH #1 SMP PREEMPT Wed Aug 21 13:49:35 CEST 2013 x86_64
[ 778.193] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/root rw cryptdevice=/dev/linux/drive0:root quiet nomodeset
[ 778.254] Build Date: 28 April 2013 01:19:17PM
[ 778.283]
[ 778.313] Current version of pixman: 0.30.2
[ 778.373] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 778.373] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 778.499] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Dec 18 18:41:36 2013
[ 778.532] (==) Using config file: "/etc/X11/xorg.conf"
[ 778.565] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 778.565] (==) ServerLayout "aticonfig Layout"
[ 778.565] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 778.565] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 778.565] (**) | |-->Device "aticonfig-Device[0]-0"
[ 778.565] (==) Automatically adding devices
[ 778.565] (==) Automatically enabling devices
[ 778.565] (==) Automatically adding GPU devices
[ 778.565] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 778.565] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 778.565] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 778.565] (II) Loader magic: 0x7fbc20
[ 778.565] (II) Module ABI versions:
[ 778.565] X.Org ANSI C Emulation: 0.4
[ 778.565] X.Org Video Driver: 13.1
[ 778.565] X.Org XInput driver : 18.0
[ 778.565] X.Org Server Extension : 7.0
[ 778.566] (--) PCI:*(0:1:0:0) 1002:683d:174b:e244 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/262144, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 778.599] Initializing built-in extension Generic Event Extension
[ 778.632] Initializing built-in extension SHAPE
[ 778.664] Initializing built-in extension MIT-SHM
[ 778.696] Initializing built-in extension XInputExtension
[ 778.728] Initializing built-in extension XTEST
[ 778.759] Initializing built-in extension BIG-REQUESTS
[ 778.789] Initializing built-in extension SYNC
[ 778.819] Initializing built-in extension XKEYBOARD
[ 778.848] Initializing built-in extension XC-MISC
[ 778.876] Initializing built-in extension SECURITY
[ 778.904] Initializing built-in extension XINERAMA
[ 778.930] Initializing built-in extension XFIXES
[ 778.957] Initializing built-in extension RENDER
[ 778.982] Initializing built-in extension RANDR
[ 779.006] Initializing built-in extension COMPOSITE
[ 779.030] Initializing built-in extension DAMAGE
[ 779.053] Initializing built-in extension MIT-SCREEN-SAVER
[ 779.076] Initializing built-in extension DOUBLE-BUFFER
[ 779.098] Initializing built-in extension RECORD
[ 779.120] Initializing built-in extension DPMS
[ 779.142] Initializing built-in extension X-Resource
[ 779.163] Initializing built-in extension XVideo
[ 779.185] Initializing built-in extension XVideo-MotionCompensation
[ 779.206] Initializing built-in extension XFree86-VidModeExtension
[ 779.227] Initializing built-in extension XFree86-DGA
[ 779.247] Initializing built-in extension XFree86-DRI
[ 779.267] Initializing built-in extension DRI2
[ 779.267] (II) "glx" will be loaded by default.
[ 779.267] (II) LoadModule: "glx"
[ 779.267] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 779.267] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 779.267] compiled for 6.9.0, module version = 1.0.0
[ 779.287] Loading extension GLX
[ 779.287] (II) LoadModule: "fglrx"
[ 779.287] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 779.300] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 779.300] compiled for 1.4.99.906, module version = 13.25.5
[ 779.300] Module class: X.Org Video Driver
[ 779.300] (II) Loading sub module "fglrxdrm"
[ 779.300] (II) LoadModule: "fglrxdrm"
[ 779.300] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 779.300] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 779.300] compiled for 1.4.99.906, module version = 13.25.5
[ 779.300] (II) AMD Proprietary Linux Driver Version Identifier:13.25.5
[ 779.300] (II) AMD Proprietary Linux Driver Release Identifier: 13.251
[ 779.300] (II) AMD Proprietary Linux Driver Build Date: Dec 6 2013 15:19:03
[ 779.300] (++) using VT number 2
[ 779.300] (WW) Falling back to old probe method for fglrx
[ 779.332] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 779.336] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.336] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.339] (--) Chipset Supported AMD Graphics Processor (0x683D) found
[ 779.339] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 779.339] (II) fglrx(0): pEnt->device->identifier=0x228dcb0
[ 779.339] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 779.339] (II) Loading sub module "vgahw"
[ 779.340] (II) LoadModule: "vgahw"
[ 779.340] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 779.340] (II) Module vgahw: vendor="X.Org Foundation"
[ 779.340] compiled for 1.13.4, module version = 0.1.0
[ 779.340] ABI class: X.Org Video Driver, version 13.1
[ 779.341] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 779.341] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 779.341] (==) fglrx(0): Default visual is TrueColor
[ 779.341] (**) fglrx(0): Option "DPMS" "true"
[ 779.341] (==) fglrx(0): RGB weight 888
[ 779.341] (II) fglrx(0): Using 8 bits per RGB
[ 779.341] (==) fglrx(0): Buffer Tiling is ON
[ 779.341] (II) Loading sub module "fglrxdrm"
[ 779.341] (II) LoadModule: "fglrxdrm"
[ 779.341] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 779.341] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 779.341] compiled for 1.4.99.906, module version = 13.25.5
[ 779.343] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.343] ukiDynamicMajor: failed to open /proc/ati/major
[ 779.343] (**) fglrx(0): NoAccel = NO
[ 779.343] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 779.343] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series " (Chipset = 0x683d)
[ 779.343] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe244)
[ 779.343] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 779.343] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 779.343] (--) fglrx(0): MMIO registers at 0xf0200000
[ 779.343] (--) fglrx(0): I/O port at 0x00002000
[ 779.343] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 779.348] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 779.349] (II) Loading sub module "vbe"
[ 779.349] (II) LoadModule: "vbe"
[ 779.349] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 779.349] (II) Module vbe: vendor="X.Org Foundation"
[ 779.349] compiled for 1.13.4, module version = 1.1.0
[ 779.349] ABI class: X.Org Video Driver, version 13.1
[ 779.350] (II) fglrx(0): VESA BIOS detected
[ 779.350] (II) fglrx(0): VESA VBE Version 3.0
[ 779.350] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 779.350] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 779.350] (II) fglrx(0): VESA VBE OEM Software Rev: 15.23
[ 779.350] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 779.350] (II) fglrx(0): VESA VBE OEM Product: VERDE
[ 779.350] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 779.363] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 779.363] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 779.363] (II) fglrx(0): PCIE card detected
[ 779.364] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 779.364] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 779.364] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[ 779.364] (II) fglrx(0): RandR 1.2 support is enabled!
[ 779.364] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 779.364] (==) fglrx(0): Center Mode is disabled
[ 779.364] (II) Loading sub module "fb"
[ 779.364] (II) LoadModule: "fb"
[ 779.364] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 779.364] (II) Module fb: vendor="X.Org Foundation"
[ 779.364] compiled for 1.13.4, module version = 1.0.0
[ 779.364] ABI class: X.Org ANSI C Emulation, version 0.4
[ 779.364] (II) Loading sub module "ddc"
[ 779.364] (II) LoadModule: "ddc"
[ 779.364] (II) Module "ddc" already built-in
[ 779.440] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 779.440] (II) fglrx(0): Output DFP2 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP3 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP4 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP5 has no monitor section
[ 779.440] (II) fglrx(0): Output DFP6 has no monitor section
[ 779.440] (II) fglrx(0): Output CRT1 has no monitor section
[ 779.440] (II) Loading sub module "ddc"
[ 779.440] (II) LoadModule: "ddc"
[ 779.440] (II) Module "ddc" already built-in
[ 779.440] (II) fglrx(0): Connected Display0: CRT1
[ 779.440] (II) fglrx(0): Display0 EDID data ---------------------------
[ 779.440] (II) fglrx(0): Manufacturer: VSC Model: 220 Serial#: 16843009
[ 779.440] (II) fglrx(0): Year: 2007 Week: 12
[ 779.440] (II) fglrx(0): EDID Version: 1.3
[ 779.440] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 779.440] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 779.440] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 779.440] (II) fglrx(0): Gamma: 2.20
[ 779.440] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 779.440] (II) fglrx(0): Default color space is primary color space
[ 779.440] (II) fglrx(0): First detailed timing is preferred mode
[ 779.440] (II) fglrx(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
[ 779.440] (II) fglrx(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 779.440] (II) fglrx(0): Supported established timings:
[ 779.440] (II) fglrx(0): 720x400@70Hz
[ 779.440] (II) fglrx(0): 640x480@60Hz
[ 779.440] (II) fglrx(0): 640x480@67Hz
[ 779.440] (II) fglrx(0): 640x480@72Hz
[ 779.440] (II) fglrx(0): 640x480@75Hz
[ 779.440] (II) fglrx(0): 800x600@56Hz
[ 779.440] (II) fglrx(0): 800x600@60Hz
[ 779.440] (II) fglrx(0): 800x600@72Hz
[ 779.440] (II) fglrx(0): 800x600@75Hz
[ 779.440] (II) fglrx(0): 832x624@75Hz
[ 779.440] (II) fglrx(0): 1024x768@60Hz
[ 779.440] (II) fglrx(0): 1024x768@70Hz
[ 779.440] (II) fglrx(0): 1024x768@75Hz
[ 779.440] (II) fglrx(0): 1280x1024@75Hz
[ 779.440] (II) fglrx(0): 1152x864@75Hz
[ 779.440] (II) fglrx(0): Manufacturer's mask: 0
[ 779.440] (II) fglrx(0): Supported standard timings:
[ 779.440] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 779.440] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 779.440] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 779.440] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 779.440] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 779.440] (II) fglrx(0): Supported detailed timing:
[ 779.440] (II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 256 mm
[ 779.440] (II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 779.440] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 779.440] (II) fglrx(0): Serial No: QN9071271907
[ 779.440] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 779.440] (II) fglrx(0): Monitor name: VA1930wm-3
[ 779.440] (II) fglrx(0): EDID (in hex):
[ 779.440] (II) fglrx(0): 00ffffffffffff005a63200201010101
[ 779.440] (II) fglrx(0): 0c1101030e291a782ee5b5a355499927
[ 779.440] (II) fglrx(0): 135054bfef809500950f81808140714f
[ 779.440] (II) fglrx(0): 0101010101019a29a0d0518422305098
[ 779.440] (II) fglrx(0): 36009a001100001c000000ff00514e39
[ 779.440] (II) fglrx(0): 3037313237313930370a000000fd0032
[ 779.440] (II) fglrx(0): 4b1e520e000a202020202020000000fc
[ 779.440] (II) fglrx(0): 00564131393330776d2d330a20200028
[ 779.440] (II) fglrx(0): End of Display0 EDID data --------------------
[ 779.440] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 779.441] (II) fglrx(0): EDID for output DFP1
[ 779.441] (II) fglrx(0): EDID for output DFP2
[ 779.441] (II) fglrx(0): EDID for output DFP3
[ 779.441] (II) fglrx(0): EDID for output DFP4
[ 779.441] (II) fglrx(0): EDID for output DFP5
[ 779.441] (II) fglrx(0): EDID for output DFP6
[ 779.441] (II) fglrx(0): EDID for output CRT1
[ 779.441] (II) fglrx(0): Manufacturer: VSC Model: 220 Serial#: 16843009
[ 779.441] (II) fglrx(0): Year: 2007 Week: 12
[ 779.441] (II) fglrx(0): EDID Version: 1.3
[ 779.441] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 779.441] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 779.441] (II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 779.441] (II) fglrx(0): Gamma: 2.20
[ 779.441] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 779.441] (II) fglrx(0): Default color space is primary color space
[ 779.441] (II) fglrx(0): First detailed timing is preferred mode
[ 779.441] (II) fglrx(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
[ 779.441] (II) fglrx(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 779.441] (II) fglrx(0): Supported established timings:
[ 779.441] (II) fglrx(0): 720x400@70Hz
[ 779.441] (II) fglrx(0): 640x480@60Hz
[ 779.441] (II) fglrx(0): 640x480@67Hz
[ 779.441] (II) fglrx(0): 640x480@72Hz
[ 779.441] (II) fglrx(0): 640x480@75Hz
[ 779.441] (II) fglrx(0): 800x600@56Hz
[ 779.441] (II) fglrx(0): 800x600@60Hz
[ 779.441] (II) fglrx(0): 800x600@72Hz
[ 779.441] (II) fglrx(0): 800x600@75Hz
[ 779.441] (II) fglrx(0): 832x624@75Hz
[ 779.441] (II) fglrx(0): 1024x768@60Hz
[ 779.441] (II) fglrx(0): 1024x768@70Hz
[ 779.441] (II) fglrx(0): 1024x768@75Hz
[ 779.441] (II) fglrx(0): 1280x1024@75Hz
[ 779.441] (II) fglrx(0): 1152x864@75Hz
[ 779.441] (II) fglrx(0): Manufacturer's mask: 0
[ 779.441] (II) fglrx(0): Supported standard timings:
[ 779.441] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 779.441] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 779.441] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 779.441] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 779.441] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 779.441] (II) fglrx(0): Supported detailed timing:
[ 779.441] (II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 256 mm
[ 779.441] (II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 779.441] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 779.441] (II) fglrx(0): Serial No: QN9071271907
[ 779.441] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 779.441] (II) fglrx(0): Monitor name: VA1930wm-3
[ 779.441] (II) fglrx(0): EDID (in hex):
[ 779.441] (II) fglrx(0): 00ffffffffffff005a63200201010101
[ 779.441] (II) fglrx(0): 0c1101030e291a782ee5b5a355499927
[ 779.441] (II) fglrx(0): 135054bfef809500950f81808140714f
[ 779.441] (II) fglrx(0): 0101010101019a29a0d0518422305098
[ 779.441] (II) fglrx(0): 36009a001100001c000000ff00514e39
[ 779.441] (II) fglrx(0): 3037313237313930370a000000fd0032
[ 779.441] (II) fglrx(0): 4b1e520e000a202020202020000000fc
[ 779.441] (II) fglrx(0): 00564131393330776d2d330a20200028
[ 779.441] (II) fglrx(0): Printing probed modes for output CRT1
[ 779.441] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 779.441] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x800"x60.0 108.00 1280 1376 1488 1800 800 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1152x864"x60.0 106.50 1152 1520 1672 1904 864 903 909 934 -hsync +vsync (55.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 779.441] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 779.441] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 779.441] (II) fglrx(0): Output DFP1 disconnected
[ 779.441] (II) fglrx(0): Output DFP2 disconnected
[ 779.441] (II) fglrx(0): Output DFP3 disconnected
[ 779.441] (II) fglrx(0): Output DFP4 disconnected
[ 779.441] (II) fglrx(0): Output DFP5 disconnected
[ 779.441] (II) fglrx(0): Output DFP6 disconnected
[ 779.441] (II) fglrx(0): Output CRT1 connected
[ 779.441] (II) fglrx(0): Using exact sizes for initial modes
[ 779.441] (II) fglrx(0): Output CRT1 using initial mode 1440x900
[ 779.441] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 779.441] (II) fglrx(0): DPI set to (96, 96)
[ 779.441] (II) fglrx(0): Eyefinity capable adapter detected.
[ 779.441] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 779.441] (==) fglrx(0): PseudoColor visuals disabled
[ 779.441] (II) Loading sub module "ramdac"
[ 779.441] (II) LoadModule: "ramdac"
[ 779.441] (II) Module "ramdac" already built-in
[ 779.441] (==) fglrx(0): NoDRI = NO
[ 779.441] (==) fglrx(0): Capabilities: 0x00000000
[ 779.441] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 779.441] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 779.441] (==) fglrx(0): UseFastTLS=0
[ 779.441] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 779.441] (--) Depth 24 pixmap format is 32 bpp
[ 779.441] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 779.441] (WW) fglrx(0): ***********************************************************
[ 779.441] (WW) fglrx(0): * DRI initialization failed *
[ 779.441] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 779.441] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 779.441] (WW) fglrx(0): ***********************************************************
[ 779.441] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x10000000
[ 779.442] (II) fglrx(0): FBMM initialized for area (0,0)-(1472,8191)
[ 779.442] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1472,1440) (front color buffer - assumption)
[ 779.442] (II) fglrx(0): Largest offscreen area available: 1472 x 6751
[ 779.442] (==) fglrx(0): Backing store disabled
[ 779.442] Loading extension FGLRXEXTENSION
[ 779.442] (**) fglrx(0): DPMS enabled
[ 779.442] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 779.442] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 779.442] (II) LoadModule: "glesx"
[ 779.442] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 779.443] (II) Module glesx: vendor="X.Org Foundation"
[ 779.443] compiled for 1.4.99.906, module version = 1.0.0
[ 779.443] Loading extension GLESX
[ 779.443] (II) fglrx(0): GLESX enableFlags = 576
[ 779.443] (II) fglrx(0): Enable composite support successfully
[ 779.443] (WW) fglrx(0): Option "VendorName" is not used
[ 779.443] (WW) fglrx(0): Option "ModelName" is not used
[ 779.443] (==) fglrx(0): Silken mouse enabled
[ 779.443] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 779.443] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 779.556] (--) RandR disabled
[ 779.559] (II) AIGLX: Screen 0 is not DRI capable
[ 779.560] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 779.560] (II) fglrx(0): Setting screen physical size to 381 x 238
[ 779.668] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 779.668] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 779.668] (II) LoadModule: "evdev"
[ 779.668] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 779.669] (II) Module evdev: vendor="X.Org Foundation"
[ 779.669] compiled for 1.13.0, module version = 2.7.3
[ 779.669] Module class: X.Org XInput Driver
[ 779.669] ABI class: X.Org XInput driver, version 18.0
[ 779.669] (II) Using input driver 'evdev' for 'Power Button'
[ 779.669] (**) Power Button: always reports core events
[ 779.669] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 779.669] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 779.669] (--) evdev: Power Button: Found keys
[ 779.669] (II) evdev: Power Button: Configuring as keyboard
[ 779.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 779.669] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 779.669] (**) Option "xkb_rules" "evdev"
[ 779.669] (**) Option "xkb_model" "evdev"
[ 779.669] (**) Option "xkb_layout" "us"
[ 779.694] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 779.694] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 779.694] (II) Using input driver 'evdev' for 'Sleep Button'
[ 779.694] (**) Sleep Button: always reports core events
[ 779.694] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 779.694] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 779.694] (--) evdev: Sleep Button: Found keys
[ 779.694] (II) evdev: Sleep Button: Configuring as keyboard
[ 779.694] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 779.694] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 779.694] (**) Option "xkb_rules" "evdev"
[ 779.694] (**) Option "xkb_model" "evdev"
[ 779.694] (**) Option "xkb_layout" "us"
[ 779.695] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 779.695] (II) No input driver specified, ignoring this device.
[ 779.695] (II) This device may have been added with another device file.
[ 779.695] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[ 779.695] (II) No input driver specified, ignoring this device.
[ 779.695] (II) This device may have been added with another device file.
[ 779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 779.696] (II) No input driver specified, ignoring this device.
[ 779.696] (II) This device may have been added with another device file.
[ 779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 779.696] (II) No input driver specified, ignoring this device.
[ 779.696] (II) This device may have been added with another device file.
[ 779.696] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 779.696] (II) No input driver specified, ignoring this device.
[ 779.696] (II) This device may have been added with another device file.
[ 779.697] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[ 779.697] (II) No input driver specified, ignoring this device.
[ 779.697] (II) This device may have been added with another device file.
[ 779.697] (II) config/udev: Adding input device UVC Camera (046d:081d) (/dev/input/event6)
[ 779.697] (**) UVC Camera (046d:081d): Applying InputClass "evdev keyboard catchall"
[ 779.697] (II) Using input driver 'evdev' for 'UVC Camera (046d:081d)'
[ 779.697] (**) UVC Camera (046d:081d): always reports core events
[ 779.697] (**) evdev: UVC Camera (046d:081d): Device: "/dev/input/event6"
[ 779.697] (--) evdev: UVC Camera (046d:081d): Vendor 0x46d Product 0x81d
[ 779.697] (--) evdev: UVC Camera (046d:081d): Found keys
[ 779.697] (II) evdev: UVC Camera (046d:081d): Configuring as keyboard
[ 779.697] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input6/event6"
[ 779.697] (II) XINPUT: Adding extended input device "UVC Camera (046d:081d)" (type: KEYBOARD, id 8)
[ 779.697] (**) Option "xkb_rules" "evdev"
[ 779.698] (**) Option "xkb_model" "evdev"
[ 779.698] (**) Option "xkb_layout" "us"
[ 779.698] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/event0)
[ 779.698] (**) Logitech Unifying Device. Wireless PID:101b: Applying InputClass "evdev pointer catchall"
[ 779.698] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101b'
[ 779.698] (**) Logitech Unifying Device. Wireless PID:101b: always reports core events
[ 779.698] (**) evdev: Logitech Unifying Device. Wireless PID:101b: Device: "/dev/input/event0"
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Vendor 0x46d Product 0xc52b
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found 20 mouse buttons
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found scroll wheel(s)
[ 779.698] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found relative axes
[ 779.699] (--) evdev: Logitech Unifying Device. Wireless PID:101b: Found x and y relative axes
[ 779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Configuring as mouse
[ 779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: Adding scrollwheel support
[ 779.699] (**) evdev: Logitech Unifying Device. Wireless PID:101b: YAxisMapping: buttons 4 and 5
[ 779.699] (**) evdev: Logitech Unifying Device. Wireless PID:101b: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 779.699] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0003/input/input0/event0"
[ 779.699] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101b" (type: MOUSE, id 9)
[ 779.699] (II) evdev: Logitech Unifying Device. Wireless PID:101b: initialized for relative axes.
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) keeping acceleration scheme 1
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration profile 0
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration factor: 2.000
[ 779.699] (**) Logitech Unifying Device. Wireless PID:101b: (accel) acceleration threshold: 4
[ 779.700] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101b (/dev/input/mouse0)
[ 779.700] (II) No input driver specified, ignoring this device.
[ 779.700] (II) This device may have been added with another device file.
[ 779.700] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event1)
[ 779.700] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 779.700] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 779.700] (**) BTC USB Multimedia Keyboard: always reports core events
[ 779.700] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event1"
[ 779.700] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[ 779.700] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[ 779.700] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[ 779.700] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input1/event1"
[ 779.700] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[ 779.700] (**) Option "xkb_rules" "evdev"
[ 779.700] (**) Option "xkb_model" "evdev"
[ 779.700] (**) Option "xkb_layout" "us"
[ 779.701] (II) config/udev: Adding input device BTC USB Multimedia Keyboard (/dev/input/event2)
[ 779.701] (**) BTC USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 779.701] (II) Using input driver 'evdev' for 'BTC USB Multimedia Keyboard'
[ 779.701] (**) BTC USB Multimedia Keyboard: always reports core events
[ 779.701] (**) evdev: BTC USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 779.701] (--) evdev: BTC USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[ 779.701] (--) evdev: BTC USB Multimedia Keyboard: Found keys
[ 779.701] (II) evdev: BTC USB Multimedia Keyboard: Configuring as keyboard
[ 779.701] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input2/event2"
[ 779.701] (II) XINPUT: Adding extended input device "BTC USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[ 779.701] (**) Option "xkb_rules" "evdev"
[ 779.701] (**) Option "xkb_model" "evdev"
[ 779.701] (**) Option "xkb_layout" "us"
[ 779.702] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 779.702] (II) No input driver specified, ignoring this device.
[ 779.702] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event10)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event11)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event12)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event13)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.703] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event8)
[ 779.703] (II) No input driver specified, ignoring this device.
[ 779.703] (II) This device may have been added with another device file.
[ 779.704] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event9)
[ 779.704] (II) No input driver specified, ignoring this device.
[ 779.704] (II) This device may have been added with another device file.
[ 779.704] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 779.704] (II) No input driver specified, ignoring this device.
[ 779.704] (II) This device may have been added with another device file.
[ 779.706] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 808.793] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
Please Help,
I am very new to Arch
Last edited by jasonwryan (2013-12-20 18:46:10)Steef435 wrote:If you got a kernel update it has to be rebuilt.
Pacman always automatically rebuilds the kernel after it is updated, all that is required is a reboot.
develop7 wrote:but now my internet connection doesn't work.
May I point you and quote you to this in a sticky which you should of read before posting:
iphitus wrote:
Don't do this
It doesnt work!!!
That is not output, that says absolutely nothing. It's probably the most useless thing you could post.
develop7 wrote:Ok, sorry I am a real n00b but I think I need to rebuild everything. How do I do this?
Arch is a system designed for the more competent user, if you are going to constantly ask for help every step of the way you may need to rethink which operating system you may be using.
Last edited by Kartious (2014-01-07 09:48:49) -
[solved] Radeon/Ati and Xorg 1.9
Hi,
since I've upgradede my ati driver (xf86-video-ati) and X to X 1.9 I cannot start my X session, because of the following issue:
Failed to map cursor buffer memory
Fatal server error:
failed to map pixmap -22
XIO fatal IO error 11 (Resource temporarily unavailable) on X server 0:0
In the very beginning after having upgraded, I obtained in addition the error of unknown synaptic devices (mouse and touchpad), but in one of the forum threads it was solved and thus I could fix it.(sry link is missing)
But the one error above is still unsolved, and hinders me starting X. Mr. Google couldn't help enymore.
Downgrading is not possible, because of the missing packages...
I hope one of you can help me get X on the screen.
best,
L-K
[EDIT]
I compiled from git and now xf86-video-ati-git works well. maybe the version in [extra] differs from that git-version in AUR.
Ty for reading.
Last edited by linux-ka (2010-10-26 18:07:35)The kind people from the IRC channel suggested I add this bit at the very end of the "/etc/X11/xorg.conf" file (instead of "/etc/X11/xorg.conf.d/10-evdev.conf" - tho it would've probably worked that way too):
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us, ro"
Option "XkbVariant" "std"
Option "XkbOptions" "grp:caps_toggle, grp_led:scroll"
EndSection
Apparently it works. I just have to hold AltGr and press s, q , a, i, t, etc to type ș â ă î ț etc. But how do I set it to ; { } ] ' ", etc, like the default behaviour in Windows... ? I would like them to correspond to this layout.
Because this is not the "standard" ("std") version...
I may have to edit the "/usr/share/X11/xkb/symbols/ro" file to map them.
Unless there's a better way ?
Last edited by DSpider (2010-12-11 13:19:16) -
I am trying to get 3d working with the ATI drivers. I have installed the kernel and have installed the drivers, ran
fglrxconfig
. I have also added the fglrx module to rc.conf and then when i boot i get the following error message:
(ww) Fglrx: no matching device section for instance (BusID PCI:1:5:0) found
(EE) No devices detected
Here is my xorg.conf:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# DRI Section
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
#This loads the synaptics touchpad driver
# Load "synaptics"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse[1]"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
#Section "InputDevice"
# Driver "synaptics"
# Identifier "Mouse[1]"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "1700"
# Option "RightEdge" "5300"
# Option "TopEdge" "1700"
# Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "VertScrollDelta" "100"
# Option "MinSpeed" "0.06"
# Option "MaxSpeed" "0.12"
# Option "AccelFactor" "0.0010"
# Option "SHMConfig" "on"
# #Option "Repeater" "/dev/ps2mouse"
# EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5653
Screen 0
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Thanks in advance!no, my graphics card has Hypermemory (where it has dedicated memory, but allows you to add system memory for use as well). So i was on a forum ( www.notebookanalysis.com ) that deals only with my model of notebook, and saw someone with the same blank screen as mine, so they go it to work by using only shared video memory. So i changed that and it worked.
When i type glxinfo i get this:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
GLX_ATI_render_texture
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON XPRESS 200M Series SW TCL Generic
OpenGL version string: 1.3.5519 (X4.3.0-8.20.8)
OpenGL extensions:
GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
GL_S3_s3tc, GL_ARB_depth_texture, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_multisample, GL_ARB_occlusion_query, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
GL_ARB_vertex_blend, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_ARB_draw_buffers, GL_ATI_draw_buffers,
GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader, GL_ATI_separate_stencil,
GL_ATI_texture_env_combine3, GL_ATI_texture_float,
GL_ATI_texture_mirror_once, GL_ATI_vertex_streams,
GL_ATIX_texture_env_combine3, GL_ATIX_texture_env_route,
GL_ATIX_vertex_shader_output_point_size, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_object,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_texgen_reflection, GL_EXT_texture3D,
GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
GL_EXT_vertex_shader, GL_HP_occlusion_test, GL_NV_blend_square,
GL_NV_occlusion_query, GL_NV_texgen_reflection, GL_SGI_color_matrix,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x24 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x27 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x28 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x29 24 tc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x2a 24 tc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x2b 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x2c 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 1 0 None
0x2d 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x2e 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 16 16 16 16 1 0 None
0x2f 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x30 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 1 0 None
0x31 24 dc 0 32 0 r y . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
0x32 24 dc 0 32 0 r . . 8 8 8 8 0 24 0 0 0 0 0 1 0 None
which tells me that DRI is enabled.....however after running glxinfo, it gives me the information above, but does not bring me back to a command line, almost as if it is frozen. There are several other applications that freeze constantly while using them.
output of lsmod:
Module Size Used by
usblp 10752 0
usbhid 40064 0
yealink 10752 0
usb_storage 62272 0
eth1394 16776 0
uhci_hcd 26768 0
ehci_hcd 27144 0
ohci_hcd 17028 0
ohci1394 28084 0
ieee1394 77400 2 eth1394,ohci1394
amd64_agp 9668 0
snd_atiixp_modem 12296 1
snd_atiixp 14988 2
snd_ac97_codec 80032 2 snd_atiixp_modem,snd_atiixp
snd_ac97_bus 2688 1 snd_ac97_codec
snd_pcm_oss 41760 0
snd_mixer_oss 15104 1 snd_pcm_oss
snd_pcm 69252 4 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_timer 19076 1 snd_pcm
snd 41956 13 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7776 1 snd
snd_page_alloc 8200 3 snd_atiixp_modem,snd_atiixp,snd_pcm
yenta_socket 22156 0
rsrc_nonstatic 10624 1 yenta_socket
pcmcia_core 32664 2 yenta_socket,rsrc_nonstatic
fglrx 417568 19
agpgart 26064 2 amd64_agp,fglrx
fuse 29712 0
ndiswrapper 150800 0
8139too 22528 0
mii 4992 1 8139too
usbcore 100484 9 usblp,usbhid,yealink,usb_storage,uhci_hcd,ehci_hcd,ohci_hcd,ndiswrapper
ntfs 186640 1
evdev 7552 0
xfs 436896 0
reiserfs 214768 0
jfs 152828 0
ext3 107016 1
jbd 49044 1 ext3
sata_vsc 6020 0
sata_uli 5252 0
sata_via 6276 0
sata_sx4 11268 0
sata_svw 5892 0
sata_sis 5892 0
sata_sil24 8964 0
sata_qstor 7428 0
sata_promise 8708 0
sata_sil 6916 0
sata_nv 7044 0
sata_mv 14340 0
mptspi 6664 0
mptsas 12300 0
mptfc 5892 0
mptscsih 27536 3 mptspi,mptsas,mptfc
mptctl 19968 0
mptbase 39904 5 mptspi,mptsas,mptfc,mptscsih,mptctl
tmscsim 18880 0
sym53c8xx 68372 0
st 32416 0
sg 26528 0
sr_mod 13732 0
scsi_transport_sas 13568 1 mptsas
raid_class 5120 0
qlogicfas408 6536 0
qla6312 115712 0
qla2322 134912 0
qla2300 125056 0
qla2200 87680 0
qla2100 79872 0
qla2xxx 106460 5 qla6312,qla2322,qla2300,qla2200,qla2100
pdc_adma 7300 0
qla1280 115340 0
osst 45088 0
nsp32 21908 0
megaraid_sas 22956 0
megaraid_mbox 28816 0
megaraid_mm 9252 1 megaraid_mbox
lpfc 125884 0
iscsi_tcp 34308 0
scsi_transport_iscsi 18112 1 iscsi_tcp
ipr 55072 0
imm 10632 0
parport 28488 1 imm
dmx3191d 12160 0
dc395x 30480 0
atp870u 27136 0
ata_piix 7556 0
aic7xxx 148788 0
aic79xx 219864 0
ahci 9988 0
libata 46348 15 sata_vsc,sata_uli,sata_via,sata_sx4,sata_svw,sata_sis,sata_sil24,sata_qstor,sata_promise,sata_sil,sata_nv,sata_mv,pdc_adma,ata_piix,ahci
aha152x 32080 0
aacraid 47616 0
a100u2w 9280 0
BusLogic 21556 0
3w_xxxx 23968 0
3w_9xxx 27908 0
sd_mod 13568 0
ide_floppy 15104 0
ide_cd 33284 0
cdrom 31520 2 sr_mod,ide_cd
ide_disk 13568 4
via82cxxx 8196 0 [permanent]
trm290 4228 0 [permanent]
triflex 3712 0 [permanent]
slc90e66 4992 0 [permanent]
sis5513 13448 0 [permanent]
siimage 10112 0 [permanent]
serverworks 7816 0 [permanent]
sc1200 6272 0 [permanent]
rz1000 2944 0 [permanent]
piix 8708 0 [permanent]
pdc202xx_old 8960 0 [permanent]
pdc202xx_new 7552 0 [permanent]
ns87415 4168 0 [permanent]
it821x 7300 0 [permanent]
hpt366 16000 0 [permanent]
hpt34x 4608 0 [permanent]
generic 4868 0 [permanent]
cy82c693 4356 0 [permanent]
cs5535 6016 0 [permanent]
cs5530 4736 0 [permanent]
cmd64x 9500 0 [permanent]
atiixp 5264 0 [permanent]
amd74xx 12956 0 [permanent]
alim15x3 9996 0 [permanent]
aec62xx 6400 0 [permanent]
ide_core 102480 29 usb_storage,ide_floppy,ide_cd,ide_disk,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,it821x,hpt366,hpt34x,generic,cy82c693,cs5535,cs5530,cmd64x,atiixp,amd74xx,alim15x3,aec62xx
i see fglrx is loaded along with agpgart and amd64_agp..... does this mean that my modules are looking for external agpgart?
I am using the archck kernel because i thought that was the only way i could use the ati-drivers package from community.....
I have also tried re-running the fglrxconfig, but it hasnt solved anything.
Any help would be appreciated!!
Thanks in advance! -
I have some warnings, how correct it?
Use Open-Source driver
WW:
[zy@ysq ~]$ egrep WW\|EE /var/log/Xorg.0.log
Current Operating System: Linux ysq 2.6.23-ARCH #1 SMP PREEMPT Mon Nov 26 21:15:02 UTC 2007 i686
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Loading extension MIT-SCREEN-SAVER
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xf87ff800
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
xorg.conf
# xorg.conf by zy
Section "ServerFlags"
Option "DefaultServerLayout" "Monitor"
EndSection
# Files, Modules, and Input
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "dri"
Load "drm"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "Auto"
Option "ZAxisMapping" "4 5"
Option "emulate3Buttons" "no"
EndSection
# Monitor section
Section "Monitor"
Identifier "LG T710PH"
ModelName "LG T710PH"
Option "DPMS"
HorizSync 30-80
VertRefresh 50-80
DisplaySize 336 269
EndSection
# Graphics device section
Section "Device"
Identifier "ATI Radeon"
Driver "radeon"
Option "AGPMode" "8"
Option "XAANoOffscreenPixmaps" "true"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
EndSection
# Screen sections
Section "Screen"
Identifier "ATI Screen"
Device "ATI Radeon"
Monitor "LG T710PH"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
Section "ServerLayout"
Identifier "Monitor"
Screen 0 "ATI Screen" 0 0
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "dri"
Mode 0666
EndSection
Last edited by zy (2007-12-12 14:42:01)I don't think the warnings do you any harm. It could be that you did hit freedesktop bug 6689 or freedesktop bug 6624. For bug 6689 there is a mesa patch in the bug report (not sure if it is not yet included in the repo version of mesa).
Though I wouldn't mind that much because the only thing the patch does is not show the warnings. -
Xorg 1.10 and catalyst 11.2 AUR are in conflict
Cannot upgrade
Last edited by nikunjm (2011-03-19 07:08:51)Yeeees, catalyst isn't supporting xserver 1.10 atm. Maybe 11.3 will support it, maybe.
Workaround is to:
- add xorg-server-* and xf86-input-* packages which you installed into pacman.conf's IgnorePkg list
- OR use [xorg19] repo - read wiki . -
Archck + ati-fglrx + xorg, machine freezes
I'm using kernel26archck 2.6.15.archck7-3, ati-fglrx-archck 8.22.5-2, and xorg 11R7.0-1.
When I start X and use any window manager, the machine hangs and acts weirdly. I try to maximize a terminal window, the machine freezes. It seems as though if I dhcp first I can ssh into the machine remotely, but if I kill X the machine hangs.
Any clues why this would happen? This does *not* happen with the normal arch kernel with ati fglrx installed.Any work arounds? I don't mind adding another kernel option or something if I need to if the change helps somebody else.
Either way, thanks -
Ati on xorg, freeze changing vt
It's great to see xorg supported, though it has been an absurdly long wait...they seem to forget that we pay for this hardware!
When changing vt, restarting x, or shutting down i get a blank screen, if i then try to change to another vt x freezes, worse is that sometimes the screen corrupts and a gradually brightening whiteness sweeps across it, an unnerving experience!
My Xorg.0.log is apparently fine, and doesn't report this error fully, with the exception of this line:
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
This is my xorg.conf;
Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "synaptics"
Load "glx"
Load "dri"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
EndSection
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontVTSwitch"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1900"
Option "RightEdge" "5400"
Option "TopEdge" "1900"
Option "BottomEdge" "4000"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
# Option "Resolution" "800"
# Option "SampleRate" "400"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
# HorizSync 31.5 - 48.5
# VertRefresh 40.0 - 75.0
EndSection
Section "Device"
Identifier "Device0"
Driver "fglrx"
Option "AGPFastWrite" "on"
Option "EnablePageFlip" "on"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "RenderAccel" "false"
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen0"
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "Mouse1" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
I'm completely lost with this problem, especially since there isn't any specific mention in the logs of what might be happening.
Any help is hugely appreciated.
DanI have had the same problem too when i install the fglrx driver, everything works just fine like mentioned above, and exact sympton like above too.
-
[Solved]ATI video drivers for videocard5670 HD[Catalyst]
I have some problems with catalyst for AMD
I followed the guide on the wiki ( https://wiki.archlinux.org/index.php/AMD_Catalyst )
and when i am at
Checking operation
Assuming that a reboot to your login was successful, you can check if fglrx is running properly with the following commands:
$ lsmod | grep fglrx
$ fglrxinfo
it returns an error
[mark@Arch ~]$ lsmod | grep fglrx
[mark@Arch ~]$ fglrxinfo
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 155 (ATIFGLEXTENSION)
Minor opcode of failed request: 66 ()
Serial number of failed request: 13
Current serial number in output stream: 13
[mark@Arch ~]$
The packets were grabbed with pacman from
[catalyst]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
I've blacklisted radeon from /etc/modprobe.d/modprobe.conf and it isn't loading in /etc/modules-load.d/
also added fglrx in /etc/modules-load.d/ (i think it was added by default)
Someone from romanian forums(i am romanian) suggested me to remove radeon from modules in mkintcpio (did that) and rebuilded the image after ,still no luck.
I think there's a problem with fglrx somewhere (because grep fglrx isn't returning anything.
Last edited by dede24ever (2013-10-19 17:21:35)Ok,
1) Did you install the catalyst (which only provides the kernel modules for the kernel Vi0L0 had when building it) or do you have one of the other packages installed?
2) Which version did you install? 13.4, 13.11?
3) Did you run "sudo aticonfig --[options required]"?
4) Did you run "sudo catalyst_build_module all"?
Also, remove fglrx from /etc/modules-load-d/ . It should already be added in /etc/mkinitcpio.conf if you've done everything correctly. -
Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600
Hello all,
I'm reporting in with an error that I can't seem to shake since the Xorg 1.8 and Catalyst 10.6 release. I have been unable to get the two to place nice with the Mobility Radeon HD 2600 in my HP Compaq 8510p notebook. I've followed the instructions on the Arch ATI Catalyst wiki using the repository approach. Everything installs correctly and I've configured the xorg.conf as instructed in the wiki. I actually just delete the existing xorg.conf and run aticonfig --initial, but still no dice. I've made sure that I have the fglrx module loaded in my rc.conf.
When GDM tries to start, it freaks out with the screen flashing a few times and then crashes saying too many attempts to start X. I login and try to start X manually and it produces the following log file:
[ 24.874]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 24.874]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 24.874] X Protocol Version 11, Revision 0
[ 24.874] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 24.874] Current Operating System: Linux gizmo 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 24.874] Kernel command line: root=/dev/disk/by-uuid/56888501-5e9b-4251-8d84-20eee8a125ce ro nomodeset
[ 24.875] Build Date: 21 June 2010 12:01:49PM
[ 24.875]
[ 24.875] Current version of pixman: 0.18.2
[ 24.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.875] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Jul 23 19:47:16 2010
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.876] (==) ServerLayout "aticonfig Layout"
[ 24.876] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 24.876] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 24.876] (**) | |-->Device "aticonfig-Device[0]-0"
[ 24.876] (==) Automatically adding devices
[ 24.877] (==) Automatically enabling devices
[ 24.877] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.877] Entry deleted from font path.
[ 24.877] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.877] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.877] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.877] (II) Loader magic: 0x7ce880
[ 24.877] (II) Module ABI versions:
[ 24.877] X.Org ANSI C Emulation: 0.4
[ 24.877] X.Org Video Driver: 7.0
[ 24.877] X.Org XInput driver : 9.0
[ 24.877] X.Org Server Extension : 3.0
[ 24.888] (--) PCI:*(0:1:0:0) 1002:9581:103c:30c5 ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xe4400000/65536, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 24.888] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.888] (II) "extmod" will be loaded by default.
[ 24.888] (II) "dbe" will be loaded by default.
[ 24.888] (II) "glx" will be loaded by default.
[ 24.888] (II) "record" will be loaded by default.
[ 24.888] (II) "dri" will be loaded by default.
[ 24.888] (II) "dri2" will be loaded by default.
[ 24.888] (II) LoadModule: "extmod"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.888] (II) Module extmod: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.888] ABI class: X.Org Server Extension, version 3.0
[ 24.888] (II) Loading extension MIT-SCREEN-SAVER
[ 24.888] (II) Loading extension XFree86-VidModeExtension
[ 24.888] (II) Loading extension XFree86-DGA
[ 24.888] (II) Loading extension DPMS
[ 24.888] (II) Loading extension XVideo
[ 24.888] (II) Loading extension XVideo-MotionCompensation
[ 24.888] (II) Loading extension X-Resource
[ 24.888] (II) LoadModule: "dbe"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.888] (II) Module dbe: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DOUBLE-BUFFER
[ 24.889] (II) LoadModule: "glx"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.889] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 24.889] compiled for 7.5.0, module version = 1.0.0
[ 24.889] (II) Loading extension GLX
[ 24.889] (II) LoadModule: "record"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.889] (II) Module record: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.13.0
[ 24.889] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension RECORD
[ 24.889] (II) LoadModule: "dri"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.889] (II) Module dri: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.0.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension XFree86-DRI
[ 24.889] (II) LoadModule: "dri2"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.889] (II) Module dri2: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.2.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DRI2
[ 24.890] (II) LoadModule: "fglrx"
[ 24.890] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 24.898] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 24.898] compiled for 1.7.1, module version = 8.74.4
[ 24.898] Module class: X.Org Video Driver
[ 24.898] (II) Loading sub module "fglrxdrm"
[ 24.899] (II) LoadModule: "fglrxdrm"
[ 24.899] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.899] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.899] compiled for 1.7.1, module version = 8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Version Identifier:8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Release Identifier: 8.741
[ 24.899] (II) ATI Proprietary Linux Driver Build Date: May 27 2010 12:52:57
[ 24.899] (--) using VT number 7
[ 24.900] (II) Primary Device is: PCI 01@00:00:0
[ 24.900] (WW) Falling back to old probe method for fglrx
[ 24.904] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 24.904] (--) Chipset Supported AMD Graphics Processor (0x9581) found
[ 24.905] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 24.905] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 24.905] (II) AMD Video driver is signed
[ 24.905] (II) fglrx(0): pEnt->device->identifier=0x1dcbc70
[ 24.905] (II) fglrx(0): === [atiddxPreInit] === begin
[ 24.905] (II) Loading sub module "vgahw"
[ 24.905] (II) LoadModule: "vgahw"
[ 24.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 24.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 24.905] compiled for 1.8.1.902, module version = 0.1.0
[ 24.905] ABI class: X.Org Video Driver, version 7.0
[ 24.905] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.905] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.905] (==) fglrx(0): Default visual is TrueColor
[ 24.905] (**) fglrx(0): Option "DPMS" "true"
[ 24.905] (==) fglrx(0): RGB weight 888
[ 24.905] (II) fglrx(0): Using 8 bits per RGB
[ 24.905] (==) fglrx(0): Buffer Tiling is ON
[ 24.905] (II) Loading sub module "fglrxdrm"
[ 24.905] (II) LoadModule: "fglrxdrm"
[ 24.906] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.907] ukiOpenDevice: node name is /dev/ati/card0
[ 24.907] ukiOpenDevice: open result is 10, (OK)
[ 24.907] ukiOpenByBusid: ukiOpenMinor returns 10
[ 24.907] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.907] (==) fglrx(0): NoAccel = NO
[ 24.907] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.907] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
[ 24.907] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
[ 24.907] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.907] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 24.907] (--) fglrx(0): MMIO registers at 0xe4400000
[ 24.907] (--) fglrx(0): I/O port at 0x00004000
[ 24.907] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.907] (II) fglrx(0): AC Adapter is used
[ 24.909] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 25.033] (II) Loading sub module "vbe"
[ 25.033] (II) LoadModule: "vbe"
[ 25.033] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 25.033] (II) Module vbe: vendor="X.Org Foundation"
[ 25.033] compiled for 1.8.1.902, module version = 1.1.0
[ 25.033] ABI class: X.Org Video Driver, version 7.0
[ 25.033] (II) fglrx(0): VESA BIOS detected
[ 25.033] (II) fglrx(0): VESA VBE Version 3.0
[ 25.033] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 25.033] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 25.033] (II) fglrx(0): VESA VBE OEM Software Rev: 10.56
[ 25.033] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 25.033] (II) fglrx(0): VESA VBE OEM Product: M76M
[ 25.033] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 25.063] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 25.063] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 25.063] (II) fglrx(0): PCIE card detected
[ 25.063] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.063] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.065] (II) fglrx(0): Using adapter: 1:0.0.
[ 25.097] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 25.129] (II) fglrx(0): Interrupt handler installed at IRQ 33.
[ 25.129] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.129] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.129] (==) fglrx(0): Center Mode is disabled
[ 25.129] (II) Loading sub module "fb"
[ 25.129] (II) LoadModule: "fb"
[ 25.129] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.129] (II) Module fb: vendor="X.Org Foundation"
[ 25.129] compiled for 1.8.1.902, module version = 1.0.0
[ 25.129] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.129] (II) Loading sub module "ddc"
[ 25.129] (II) LoadModule: "ddc"
[ 25.129] (II) Module "ddc" already built-in
[ 25.395] (II) fglrx(0): Finished Initialize PPLIB!
[ 25.397] (II) Loading sub module "ddc"
[ 25.397] (II) LoadModule: "ddc"
[ 25.397] (II) Module "ddc" already built-in
[ 25.397] (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
[ 25.397] (II) fglrx(0): Display0 EDID data ---------------------------
[ 25.397] (II) fglrx(0): Manufacturer: CMO Model: 1520 Serial#: 0
[ 25.397] (II) fglrx(0): Year: 1990 Week: 0
[ 25.397] (II) fglrx(0): EDID Version: 1.3
[ 25.397] (II) fglrx(0): Digital Display Input
[ 25.397] (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 20
[ 25.397] (II) fglrx(0): Gamma: 2.20
[ 25.397] (II) fglrx(0): No DPMS capabilities specified
[ 25.397] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.397] (II) fglrx(0): First detailed timing is preferred mode
[ 25.397] (II) fglrx(0): redX: 0.626 redY: 0.354 greenX: 0.294 greenY: 0.589
[ 25.397] (II) fglrx(0): blueX: 0.144 blueY: 0.097 whiteX: 0.309 whiteY: 0.329
[ 25.397] (II) fglrx(0): Manufacturer's mask: 0
[ 25.397] (II) fglrx(0): Supported detailed timing:
[ 25.397] (II) fglrx(0): clock: 131.5 MHz Image Size: 331 x 207 mm
[ 25.397] (II) fglrx(0): h_active: 1680 h_sync: 1771 h_sync_end 1831 h_blank_end 1978 h_border: 0
[ 25.397] (II) fglrx(0): v_active: 1050 v_sync: 1056 v_sync_end 1068 v_blanking: 1108 v_border: 0
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): CMO
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): EDID (in hex):
[ 25.397] (II) fglrx(0): 00ffffffffffff000daf201500000000
[ 25.397] (II) fglrx(0): 00000103802114780a77f1a05a4b9624
[ 25.397] (II) fglrx(0): 184f5400000001010101010101010101
[ 25.397] (II) fglrx(0): 0101010101015e33902a611a3a405b3c
[ 25.397] (II) fglrx(0): 6c004bcf10000018000000fe004e3135
[ 25.397] (II) fglrx(0): 345a312d4c30310a2020000000fe0043
[ 25.397] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 25.397] (II) fglrx(0): 004e3135345a312d4c30310a202000f2
[ 25.397] (II) fglrx(0): End of Display0 EDID data --------------------
[ 25.397] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 25.397] (II) fglrx(0): Output DFP1 has no monitor section
[ 25.397] (II) fglrx(0): Output DFP2 has no monitor section
[ 25.397] (II) fglrx(0): Output CRT1 has no monitor section
[ 25.397] (II) fglrx(0): Output TV has no monitor section
[ 25.397] (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
[ 25.552] (II) fglrx(0): EDID vendor "CMO", prod id 5408
[ 25.552] (II) fglrx(0): Printing DDC gathered Modelines:
[ 25.553] (II) fglrx(0): Modeline "1680x1050"x0.0 131.50 1680 1771 1831 1978 1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
[ 25.553] (II) fglrx(0): Output LVDS connected
[ 25.553] (II) fglrx(0): Output DFP1 disconnected
[ 25.553] (II) fglrx(0): Output DFP2 disconnected
[ 25.553] (II) fglrx(0): Output CRT1 disconnected
[ 25.553] (II) fglrx(0): Output TV disconnected
[ 25.553] (II) fglrx(0): Output COMPONENT_VIDEO disconnected
[ 25.553] (II) fglrx(0): Using exact sizes for initial modes
[ 25.553] (II) fglrx(0): Output LVDS using initial mode 1680x1050
[ 25.553] (II) fglrx(0): Display dimensions: (330, 200) mm
[ 25.553] (II) fglrx(0): DPI set to (129, 133)
[ 25.553] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
[ 25.553] (==) fglrx(0): QBS disabled
[ 25.553] (==) fglrx(0): PseudoColor visuals disabled
[ 25.553] (II) Loading sub module "ramdac"
[ 25.553] (II) LoadModule: "ramdac"
[ 25.553] (II) Module "ramdac" already built-in
[ 25.553] (==) fglrx(0): NoDRI = NO
[ 25.553] (==) fglrx(0): Capabilities: 0x00000000
[ 25.553] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 25.553] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 25.553] (==) fglrx(0): UseFastTLS=0
[ 25.553] (==) fglrx(0): BlockSignalsOnLock=1
[ 25.553] (--) Depth 24 pixmap format is 32 bpp
[ 25.553] (II) Loading extension ATIFGLRXDRI
[ 25.553] (II) fglrx(0): doing swlDriScreenInit
[ 25.553] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.553] ukiOpenDevice: node name is /dev/ati/card0
[ 25.553] ukiOpenDevice: open result is 15, (OK)
[ 25.553] ukiOpenByBusid: ukiOpenMinor returns 15
[ 25.553] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.553] (II) fglrx(0): [uki] DRM interface version 1.0
[ 25.553] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 25.553] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x10000
[ 25.553] (II) fglrx(0): [uki] mapped SAREA 0x10000 to 0x7f2043e35000
[ 25.553] (II) fglrx(0): [uki] framebuffer handle = 0x11000
[ 25.554] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 25.554] (II) fglrx(0): swlDriScreenInit done
[ 25.554] (II) fglrx(0): Kernel Module Version Information:
[ 25.554] (II) fglrx(0): Name: fglrx
[ 25.554] (II) fglrx(0): Version: 8.74.4
[ 25.554] (II) fglrx(0): Date: May 27 2010
[ 25.554] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 25.554] (II) fglrx(0): Kernel Module version matches driver.
[ 25.554] (II) fglrx(0): Kernel Module Build Time Information:
[ 25.554] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.34-ARCH
[ 25.554] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 25.554] (II) fglrx(0): Build-Kernel __SMP__: no
[ 25.554] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 25.554] (II) fglrx(0): [uki] register handle = 0x00012000
[ 25.571] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 25.571] (II) fglrx(0): DRI initialization successfull!
[ 25.571] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000
[ 25.571] (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
[ 25.571] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
[ 25.571] (II) fglrx(0): Largest offscreen area available: 1792 x 640
[ 25.571] (==) fglrx(0): Backing store disabled
[ 25.571] (II) Loading extension FGLRXEXTENSION
[ 25.572] (**) fglrx(0): DPMS enabled
[ 25.572] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 25.572] (**) fglrx(0): Textured Video is enabled.
[ 25.572] (II) LoadModule: "glesx"
[ 25.572] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 25.572] (II) Module glesx: vendor="X.Org Foundation"
[ 25.572] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension GLESX
[ 25.573] (II) fglrx(0): GLESX enableFlags = 592
[ 25.573] (II) fglrx(0): GLESX is enabled
[ 25.573] (II) fglrx(0): Acceleration enabled
[ 25.573] (II) LoadModule: "amdxmm"
[ 25.573] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 25.573] (II) Module amdxmm: vendor="X.Org Foundation"
[ 25.573] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension AMDXVOPL
[ 25.575] (II) fglrx(0): UVD2 feature is available
[ 25.577] (II) fglrx(0): Enable composite support successfully
[ 25.577] (WW) fglrx(0): Option "VendorName" is not used
[ 25.577] (WW) fglrx(0): Option "ModelName" is not used
[ 25.577] (II) fglrx(0): X context handle = 0x1
[ 25.577] (II) fglrx(0): [DRI] installation complete
[ 25.577] (==) fglrx(0): Silken mouse enabled
[ 25.577] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 25.577] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 25.577] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 25.577] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 25.579] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 25.579] (II) fglrx(0): Cannot set TV horizontal size.
[ 25.579] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 25.579] (II) fglrx(0): Cannot set TV horizontal position.
[ 25.579] (II) fglrx(0): Cannot set TV vertical position.
[ 25.614] (--) RandR disabled
[ 25.614] (II) Initializing built-in extension Generic Event Extension
[ 25.614] (II) Initializing built-in extension SHAPE
[ 25.614] (II) Initializing built-in extension MIT-SHM
[ 25.614] (II) Initializing built-in extension XInputExtension
[ 25.614] (II) Initializing built-in extension XTEST
[ 25.614] (II) Initializing built-in extension BIG-REQUESTS
[ 25.614] (II) Initializing built-in extension SYNC
[ 25.614] (II) Initializing built-in extension XKEYBOARD
[ 25.614] (II) Initializing built-in extension XC-MISC
[ 25.614] (II) Initializing built-in extension SECURITY
[ 25.614] (II) Initializing built-in extension XINERAMA
[ 25.614] (II) Initializing built-in extension XFIXES
[ 25.614] (II) Initializing built-in extension RENDER
[ 25.614] (II) Initializing built-in extension RANDR
[ 25.614] (II) Initializing built-in extension COMPOSITE
[ 25.614] (II) Initializing built-in extension DAMAGE
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.616] ukiOpenDevice: node name is /dev/ati/card0
[ 25.616] ukiOpenDevice: open result is 16, (OK)
[ 25.616] ukiOpenByBusid: ukiOpenMinor returns 16
[ 25.616] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.661]
Backtrace:
[ 25.661] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x498588]
[ 25.661] 1: /usr/bin/Xorg (0x400000+0x672d9) [0x4672d9]
[ 25.661] 2: /lib/libpthread.so.0 (0x7f2043180000+0xf1c0) [0x7f204318f1c0]
[ 25.661] Segmentation fault at address (nil)
[ 25.661]
Fatal server error:
[ 25.661] Caught signal 11 (Segmentation fault). Server aborting
[ 25.661]
[ 25.661]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 25.661] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 25.661]
[ 25.661] (II) fglrx(0): Backup framebuffer data.
[ 25.661] (EE) fglrx(0): total backup size zero
[ 25.661] (II) fglrx(0): Backup complete.
Any help would be greatly appreciated.skottish wrote:
Welcome to the forums.
Please don't post general issues in this sub-forum. Moving...
Oops, my bad.
As for my issue(s), I'm not going to bother with the proprietary driver until AMD gets their act together. -
[SOLVED]Swapping from xf86-video-ati driver to catalyst
Hey everyone,
So as the title implies, I need some help on this. I tried doing a pacman -R xf86-video-ati, then setting my xorg over to vesa as the driver prior to installing the catalyst driver. That part went fine. Installed catalyst which updated my xorg accordingly. Rebooted, and X won't load. So per ATI's instructions, I removed the catalyst driver, reloaded, did a new xorg - configure and worked my way back to xf86-video-ati.
I would really like to get catalyst going. Where did I screw up on my first attempt? I saw somewhere on the forum that you can actually get 3d working with the xf86 driver, but I forgot to bookmark that thread lol. Here's a copy of my current xorg if it helps at all.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri2"
Load "extmod"
Load "FGL.renamed.libglx"
Load "dbe"
Load "FGL.renamed.libdri"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "SPT"
ModelName "X9WG-NagaV"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "CustomEDID" # [<str>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "ClockGating" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "DynamicPM" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "760G [Radeon 3000]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by dissentiate (2009-12-27 05:41:59)dissentiate wrote:Is there something in particular about 1.7 version that might work for me?
It's not Xorg that is the issue. It's the Catalyst drivers, they only support up to Xorg 1.6.
So you will have to downgrade Xorg in order to use them.
I'm using the xf86-video-ati drivers myself on Xorg 1.7 with a HD4850, 2D works fine. Xv and especially 3D is a no-go so far, but my system has been running for just a day now, so i'm still setting up lots of things.
In the new kernel (2.6.32) there is KMS support for the Radeon HD3xxx and HD4xxx series. I'm hoping that will get the drm module working (fails to initialize over here), and i'm hoping that will bring me at least Xv support, so I can watch videos properly. The open-source ati driver does support it.
So if you can wait for that kernel to move from testing to core, that's what I would do before jumping into the Xorg 1.6 and Catalyst "jungle".
[Edit]
I got Xv working by disabling KMS tries by the kernel, using "nomodeset" in my kernel boot line.
OpenGL attempts (even glxgears) crashes
Last edited by Ultraman (2009-12-24 01:35:23) -
Seg fault using catalyst(-total) driver for my ATI/intel hybrid card
I am using a HP Envy 14 with Radeon 5650.
This is my lspci: http://pastebin.com/5w7SFdrK
What I've done so far is I've installed xf86-video-intel (for the onboard card) and catalyst-total (from AUR) for the discrete card. I am using the proprietary version since I need the HDMI output.
Then I've done a aticonfig --initial , blacklisted radeon module in modprobe.d , and then installed the relevant packages for startx to work.
This is the seg fault log from /var/log/Xorg.0.log: http://pastebin.com/PsPbiXj7
This is the my xorg.conf: http://www.pastebin.com/NviWjr0i
I am stuck now, how can I proceed?
Thanks!I wanted to Bump this because I have the same laptop with the same setup and get the same errors. I have tried all methods suggested for installing the catalyst to this intel/ati setup including the AUR files catalyst and catalyst-utils, the unofficial catalyst repository and the official ATI installer. Hope somebody might be able to help us out with this.
Thanks in advance. -
Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control
i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website
But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,,
i have now this drivers :
http://driverscollection.com/?H=Radeon%20HD%203100&By=ATI&SS=Windows%20XP
Manufacturer:ATI
Hardware:ATI Radeon HD 3100
Software type:Catalyst Software Suite
Version:11.8
File Size:51.38Mb (53881048 bytes)
Released:16 Aug 2011
Uploaded:27 Aug 2011
Views:159
Downloads:55
System:
Windows XPWindows XP Media Center
Description:Catalyst Software Suite for ATI Radeon HD 3100
Package Includes:
Display Driver
OpenCL Driver
ATI Integrated Driver
Catalyst Control Center
Download ATI Radeon HD 3100 Catalyst Software Suite v.11.8
im not sure if its not t o `BIG` driver for this graph card..
cus its for Ati Radeon HD 3100 and in my Toshiba L350D 20-D i have Ati Radeon 3100 ....Hi
Here you can download the latest Catalyst software:
http://www.amd.com/us/products/technologies/amd-catalyst/Pages/catalyst.aspx
Maybe you are looking for
-
Does Time Machine Copy UNCHANGED files over and over??
Okay, it seems to me that whatever files I have selected for backup are copied by Time Machine EVERY SINGLE TIME it backs up my Mac, instead of just when I make changes to them. Is that correct? If so, that just seems to be a massive waste of space o
-
Standby database in sync ... ?
Dear Experts, (Oracle 10g, Windows Server 2003). we have a standby database in maximum performace mode, I want to make sure that both are in sync or not, ihow to find ? and if they are not then what must be done to make them in sync. Thanks&Regards s
-
ALSB 3 roll back a transaction without sending a fault message
Hi, I have a proxy service exposed as a web service, which has some operations that call some tuxedo systems, do some transformation of the data, etc. When any of it's operations is invoked I have to build an XML reply in both success AND error cases
-
HT5244 Is there any way to find out after(!) running die Update, if i have been infected?
Is there any way to find out after(!) running die Update, if i have been infected?
-
Shifting data from Old R/3 server to Freshly installed server
Hi All I have freshly installed 4.6 C server on Windows 2000 and database is Oracle. Now i want to shift the data from existing 4.6C server to this new server. Is there any other procedure rather than backup/restore bec we are not going for the tape