ATI 5670 current (9/2010) status with Arch 64b?
Hi,
I'm about to buy a new multicore AMD PC with the Sapphire HD 5670 1GB GDDR5 PCI-E graphic card.
I intend to install a fresh, net (latest) version of Arch 64b, and, in view of past Linux driver/xorg issues with that series, would like to know the current-9/2010 status.
1. Can I expect a smooth installation?
2. If not, what is the solution, or which similar (price/performance wise) card should I use instead?
Thanks
Last edited by mibadt (2010-09-11 02:52:14)
I had problems before with KDE also asking me about forgetting a device. I believe what happened in my case was that when the system booted up, the order of the sound cards (card0, card1, etc; as listed in `aplay -l`) kept changing. So for example, one time it would boot up and KDE would use the mobo's sound (which i want it to), and on the next bootup, the system would think my webcam was card0, so KDE would try and use the webcam for sound output rather than the mobo.
I fixed the issue by setting the order of sound cards as done here: http://wiki.archlinux.org/index.php/Als … sound_card
Hope this helps
Similar Messages
-
Custom PC with ATI 5670 xfx is not working with APPLE cinema 24"
I need help using my apple cinema 24"
my setup is the following:
i7 custom built with ati 5670 xfx (with display port)
running windows 7 64 bit ultimate
I bought a displayPort to mini-display port cable. When I plug everything in, my apple 24" cinema is not turning on ?
can someone please help me out, Thank you.
PS. Seem like people are saying the new ATI radeon 5000 series is not compatible with apple 24" Anybody has a solution to this ? Thank you.Hi,
I already reply you in fredtorrey post.
But if you don't want change that card you will need buy atlona adaptor. -
Hi,
My 2010 imac (i5, 4G mem) has been pretty slow since mavericks - the system seems slow and unresponsive with even simple operations seeming sluggish (my 8yr old core 2 duo laptop with 10.6 was way more responsive).
I came across the thread Re: iMac mid 2010 slow with 10.9 and hoped I might be able to get some advice.
I have previously reinstalled the system from fresh to see if this would help - and while it did for a while it seems to have become slow again.
I tried starting in safe mode and it didn't seem very different. Some operations seemed slower and the window redrawing was really choppy and a bit weird (not sure if this is usual in safe mode?)
I noticed that while I was running EtreCheck and perhaps also Diskutility just now (after running the imac in safemode and then restarting it) that the Finder kept restarting. All the icons would vanish and then reload in the finder window and on the desktop. I haven't seen this before.
I have installed and run EtreCheck and the results are below. If anyone could give some advice that would be really appreciated. Thanks
EtreCheck version: 1.9.12 (48)
Report generated 23 July 2014 9:31:05 am AEST
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.8 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:10:13
Disk Information:
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Drive (disk0s2) / [Startup]: 999.35 GB (531.29 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) Support
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) Support
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.12) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[running] com.elgato.EyeConnect.plist Support
[loaded] com.spotflux.Spotflux.tun.plist Support
[not loaded] org.virtualbox.startup.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
Quicksilver
iTunesHelper
EyeTV Helper
Dropbox
Google Drive
Canon IJ Network Scanner Selector EX
Launch Nikon Message Center 2
spotflux
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Auto backup: YES
Volumes being backed up:
Drive: Disk size: 930.71 GB Disk used: 435.91 GB
Destinations:
Seagate Expansion Drive [Local] (Last used)
Total size: 2
Total number of backups: 16
Oldest backup: 2013-04-07 12:02:01 +0000
Last backup: 2014-07-09 05:14:20 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 435.91 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
1% WindowServer
1% firefox
0% fontd
0% dpd
Top Processes by Memory:
471 MB firefox
139 MB com.apple.IconServicesAgent
106 MB Finder
90 MB mds_stores
82 MB Dropbox
Virtual Memory Information:
613 MB Free RAM
1.85 GB Active RAM
1.12 GB Inactive RAM
440 MB Wired RAM
1.36 GB Page-ins
60 KB Page-outsHi,
thankyou for helping. I think I have managed to follow both steps below. The errors that are occurring related directly to the finder crashing - I am not sure if this is related to the general slowness but it would be great to fix.
Thanks
STEP 1
This is a small section of consective System log Queries. There is a cycle with the crashes that reoccurs regularly but this section seems to capture the errors that are occurring.
23/07/2014 11:18:38.172 am ReportCrash[1102]: Saved crash report for Finder[1099] version 10.9.3 (10.9.3) to /Users/nathan/Library/Logs/DiagnosticReports/Finder_2014-07-23-111838_nathans-i Mac.crash
23/07/2014 11:18:38.188 am ReportCrash[1102]: Removing excessive log: file:///Users/nathan/Library/Logs/DiagnosticReports/Finder_2014-07-23-105828_na thans-iMac.crash
23/07/2014 11:19:37.000 am kernel[0]: Data/Stack execution not permitted: Finder[pid 1103] at virtual address 0x10e603000, protections were read-only
23/07/2014 11:19:38.026 am com.apple.launchd.peruser.501[265]: (com.apple.Finder[1103]) Job appears to have crashed: Bus error: 10
23/07/2014 11:19:38.148 am ReportCrash[1102]: Saved crash report for Finder[1103] version 10.9.3 (10.9.3) to /Users/nathan/Library/Logs/DiagnosticReports/Finder_2014-07-23-111938_nathans-i Mac.crash
23/07/2014 11:19:38.149 am ReportCrash[1102]: Removing excessive log: file:///Users/nathan/Library/Logs/DiagnosticReports/Finder_2014-07-23-105928_na thans-iMac.crash
23/07/2014 11:19:38.301 am Google Drive[332]: Failed to send: -609
23/07/2014 11:20:17.000 am kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1109[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
23/07/2014 11:20:38.000 am kernel[0]: Data/Stack execution not permitted: Finder[pid 1108] at virtual address 0x109e84000, protections were read-only
23/07/2014 11:20:38.696 am com.apple.launchd.peruser.501[265]: (com.apple.Finder[1108]) Job appears to have crashed: Bus error: 10
STEP 2
Process:
Finder [1012]
Path:
/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:
com.apple.finder
Version:
10.9.3 (10.9.3)
Build Info:
Finder_FE-885003002000000~1
Code Type:
X86-64 (Native)
Parent Process: launchd [265]
Responsible:
Finder [1012]
User ID:
501
Date/Time:
2014-07-23 11:03:30.239 +1000
OS Version:
Mac OS X 10.9.3 (13D65)
Report Version: 11
Anonymous UUID: 541515EE-7A24-B680-6680-DFD7AAD386B4
Crashed Thread: 7
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
External Modification Warnings:
Thread creation by external task.
VM Regions Near 0:
-->
__TEXT
000000010c6b4000-000000010cb83000 [ 4924K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib
0x0000000112e04a1a mach_msg_trap + 10
1 libsystem_kernel.dylib
0x0000000112e03d18 mach_msg + 64
2 com.apple.CoreFoundation
0x0000000111807fc5 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation
0x00000001118075e9 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation
0x0000000111806f25 CFRunLoopRunSpecific + 309
5 com.apple.HIToolbox
0x000000010f4f0a0d RunCurrentEventLoopInMode + 226
6 com.apple.HIToolbox
0x000000010f4f07b7 ReceiveNextEventCommon + 479
7 com.apple.HIToolbox
0x000000010f4f05bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
8 com.apple.AppKit
0x00000001104b726e _DPSNextEvent + 1434
9 com.apple.AppKit
0x00000001104b68bb -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
10 com.apple.AppKit
0x00000001104aa9bc -[NSApplication run] + 553
11 com.apple.AppKit
0x00000001104957a3 NSApplicationMain + 940
12 com.apple.finder
0x000000010c6ba770 0x10c6b4000 + 26480
13 libdyld.dylib
0x0000000112c6a5fd start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib
0x0000000112e09662 kevent64 + 10
1 libdispatch.dylib
0x0000000112c30421 _dispatch_mgr_invoke + 239
2 libdispatch.dylib
0x0000000112c30136 _dispatch_mgr_thread + 52
Thread 2:
0 libsystem_kernel.dylib
0x0000000112e04a1a mach_msg_trap + 10
1 libsystem_kernel.dylib
0x0000000112e03d18 mach_msg + 64
2 com.apple.CoreFoundation
0x0000000111807fc5 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation
0x00000001118075e9 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation
0x0000000111806f25 CFRunLoopRunSpecific + 309
5 com.apple.AppKit
0x000000011065705e _NSEventThread + 144
6 libsystem_pthread.dylib
0x0000000112f1c899 _pthread_body + 138
7 libsystem_pthread.dylib
0x0000000112f1c72a _pthread_start + 137
8 libsystem_pthread.dylib
0x0000000112f20fc9 thread_start + 13
Thread 3:
0 libsystem_kernel.dylib
0x0000000112e08e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x0000000112f1df08 _pthread_wqthread + 330
2 libsystem_pthread.dylib
0x0000000112f20fb9 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib
0x0000000112e08e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x0000000112f1df08 _pthread_wqthread + 330
2 libsystem_pthread.dylib
0x0000000112f20fb9 start_wqthread + 13
Thread 5:
0 libsystem_kernel.dylib
0x0000000112e08e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib
0x0000000112f1df08 _pthread_wqthread + 330
2 libsystem_pthread.dylib
0x0000000112f20fb9 start_wqthread + 13
Thread 6:
Thread 7 Crashed:
0 com.apple.finder
0x000000010c9b3fc2 0x10c6b4000 + 3145666
Thread 7 crashed with X86 Thread State (64-bit):
rax: 0x000000000974c984 rbx: 0x0000000000000050 rcx: 0x000000010e6a8000 rdx: 0x0000000000000050
rdi: 0x000000010e6a8000 rsi: 0x000000010e2f2000 rbp: 0x000000010e6a9ff0 rsp: 0x000000010e6a9f78
r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000000000000 r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x000000010e2f2000
rip: 0x000000010c9b3fc2 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU:
0
Error Code:
0x00000004
Trap Number:
14
Binary Images:
0x10c6b4000 -
0x10cb82ff5 com.apple.finder (10.9.3 - 10.9.3) <904FF4B2-31A2-30F8-B606-784D38AF7232> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
0x10ccb7000 -
0x10cde7ff7 com.apple.desktopservices (1.8.3 - 1.8.3) <225BEC20-F8E0-3F22-9560-890A1A5B9050> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x10ce6a000 -
0x10cecdffb com.apple.SystemConfiguration (1.13.1 - 1.13.1) <2C8E1A73-5AD6-3A7D-8ED8-D6755555A993> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x10cf0d000 -
0x10cf48fff com.apple.bom (14.0 - 193.1) <EF24A562-6D3C-379E-8B9B-FAE0E4A0EF7C> /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x10cf5d000 -
0x10cf62fff com.apple.DiskArbitration (2.6 - 2.6) <A4165553-770E-3D27-B217-01FC1F852B87> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x10cf6f000 -
0x10cfdbfff com.apple.framework.IOKit (2.0.1 - 907.100.13) <057FDBA3-56D6-3903-8C0B-849214BF1985> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x10d010000 -
0x10d03cff7 com.apple.framework.SystemAdministration (1.0 - 1.0) <6FD03EF6-32B6-397D-B9D7-D68E89A462F5> /System/Library/PrivateFrameworks/SystemAdministration.framework/Versions/A/Sys temAdministration
0x10d06b000 -
0x10d14ffff com.apple.coreui (2.1 - 231) <432DB40C-6B7E-39C8-9FB5-B95917930056> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x10d212000 -
0x10d25dfff com.apple.ImageCaptureCore (5.0 - 5.0) <F529EDDC-E2F5-30CA-9938-AF23296B5C5B> /System/Library/Frameworks/ImageCaptureCore.framework/Versions/A/ImageCaptureCo re
0x10d2a6000 -
0x10d442ff3 com.apple.QuartzCore (1.8 - 332.3) <72003E51-1287-395B-BCBC-331597D45C5E> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x10d520000 -
0x10d52efff com.apple.opengl (9.6.1 - 9.6.1) <B22FA400-5824-36AF-9945-5FEC31995A0E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x10d53c000 -
0x10d600ff7 com.apple.backup.framework (1.5.3 - 1.5.3) <088FEDED-BF5C-33F4-A51A-646C8149BDAA> /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x10d68b000 -
0x10d6dcfff com.apple.QuickLookFramework (5.0 - 622.7) <17685CEC-C94B-3F83-ADE1-B24840B35E44> /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x10d71c000 -
0x10d8d4ffb libicucore.A.dylib (511.32) <A7CE7DAD-D3AD-36A2-BE4F-25C5F21FADBB> /usr/lib/libicucore.A.dylib
0x10d97b000 -
0x10d982fff com.apple.NetFS (6.0 - 4.0) <8E26C099-CE9D-3819-91A2-64EA929C6137> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x10d98e000 -
0x10dbeffff com.apple.imageKit (2.5 - 774) <AACDE16E-ED9F-3B3F-A792-69BA1942753B> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/ImageKit.fram ework/Versions/A/ImageKit
0x10de40000 -
0x10df11fff com.apple.QuickLookUIFramework (5.0 - 622.7) <13841701-34C2-353D-868D-3E08D020C90F> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuickLookUI.f ramework/Versions/A/QuickLookUI
0x10dfca000 -
0x10e253fff com.apple.CommerceKit (1.2.0 - 232.9) <F7FE41AC-AEFE-39B9-892B-0CD486C8E442> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/CommerceKit
0x10e2f3000 -
0x10e345ff7 com.apple.Suggestions (3.0 - 137.1) <B7E5B685-C6A4-35DB-BA0A-8DBA2BF4ADF6> /System/Library/PrivateFrameworks/Suggestions.framework/Versions/A/Suggestions
0x10e38d000 -
0x10e4e1ff3 com.apple.audio.toolbox.AudioToolbox (1.10 - 1.10) <69B273E8-5A8E-3FC7-B807-C16B657662FE> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x10e577000 -
0x10e648ff1 com.apple.DiskImagesFramework (10.9 - 371.1) <B26C8237-52E0-3E93-A2E2-147B57B3292E> /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x10e6ae000 -
0x10e6afff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
0x10e6b4000 -
0x10e73ffff libCoreStorage.dylib (380) <DE9B3F8C-045C-3010-9A25-C8CD72F1066B> /usr/lib/libCoreStorage.dylib
0x10e767000 -
0x10e7adfff com.apple.DiskManagement (6.1 - 744.1) <3DD4CD10-4476-334C-8C4B-991A85AAC272> /System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/DiskManag ement
0x10e7da000 -
0x10e7e4ff7 libcsfde.dylib (380) <A5CF6F85-0537-399F-968B-1536B1235E65> /usr/lib/libcsfde.dylib
0x10e7f4000 -
0x10e835fff com.apple.PerformanceAnalysis (1.47 - 47) <7B73DFF4-75DB-3403-80D2-0F3FE48764C3> /System/Library/PrivateFrameworks/PerformanceAnalysis.framework/Versions/A/Perf ormanceAnalysis
0x10f088000 -
0x10f0b6ff7 com.apple.securityinterface (9.0 - 55047) <0346D8A9-2CAA-38F3-A741-5FBA5E9F1E7C> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x10f0e8000 -
0x10f0ebfff com.apple.AppleSystemInfo (3.0 - 3.0) <61FE171D-3D88-313F-A832-280AEC8F4AB7> /System/Library/PrivateFrameworks/AppleSystemInfo.framework/Versions/A/AppleSys temInfo
0x10f0f2000 -
0x10f0fefff com.apple.Collaboration (71 - 71) <0CD617F3-354C-3FEF-A966-C2553B7662EE> /System/Library/Frameworks/Collaboration.framework/Versions/A/Collaboration
0x10f10f000 -
0x10f369ffd com.apple.security (7.0 - 55471.14.4) <1D5DA20E-DB48-3E1D-9BF5-BAA694192B25> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x10f4b8000 -
0x10f4b8fff com.apple.Cocoa (6.8 - 20) <E90E99D7-A425-3301-A025-D9E0CD11918E> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x10f4c2000 -
0x10f76cff5 com.apple.HIToolbox (2.1.1 - 698) <A388E773-AE7B-3FD1-8662-A98E6E24EA16> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x10f8cb000 -
0x10f8d8fff com.apple.Sharing (132.2 - 132.2) <F983394A-226D-3244-B511-FA51FDB6ADDA> /System/Library/PrivateFrameworks/Sharing.framework/Versions/A/Sharing
0x10f8ed000 -
0x10fbebfff com.apple.Foundation (6.9 - 1056.13) <2EE9AB07-3EA0-37D3-B407-4A520F2CB497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x10fe2d000 -
0x10ffdaf27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x10fffd000 -
0x11004ffff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
0x1100b0000 -
0x1100b1ff7 libSystem.B.dylib (1197.1.1) <E303F2F8-A8CF-3DF3-84B3-F2D0EE41CCF6> /usr/lib/libSystem.B.dylib
0x1100b9000 -
0x11017bff5 com.apple.CoreText (367.20 - 367.20) <B80D086D-93A9-3C35-860E-9C3FDD027F3B> /System/Library/Frameworks/CoreText.framework/Versions/A/CoreText
0x1101e9000 -
0x110384ff8 com.apple.CFNetwork (673.3 - 673.3) <4375B7CB-34B6-3A26-99AC-2D2404AD9C9B> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x11048d000 -
0x11048dfff com.apple.ApplicationServices (48 - 48) <3E3F01A8-314D-378F-835E-9CC4F8820031> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x110493000 -
0x111009ff7 com.apple.AppKit (6.9 - 1265.20) <D2A7AF23-0FEA-3D7D-9CF5-B4E262224577> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x111797000 -
0x11197cfff com.apple.CoreFoundation (6.9 - 855.16) <A63E680E-E4B2-368B-8564-9DBE0D8DDB91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x111af4000 -
0x111bfaff7 com.apple.ImageIO.framework (3.3.0 - 1043) <C4ADE5B1-A540-34E1-A043-118185489C9D> /System/Library/Frameworks/ImageIO.framework/Versions/A/ImageIO
0x111c66000 -
0x111c66fff com.apple.CoreServices (59 - 59) <7A697B5E-F179-30DF-93F2-8B503CEEEFD5> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x111c6d000 -
0x111ce0fff com.apple.securityfoundation (6.0 - 55122.1) <D5AA4461-7406-3054-875D-0EDA3A6030EA> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x111d22000 -
0x112641f43 com.apple.CoreGraphics (1.600.0 - 599.23.13) <3A1952C7-1D67-3DEC-A5AB-5399FF4F2A92> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x11276e000 -
0x11277efff libbsm.0.dylib (33) <2CAC00A2-1352-302A-88FA-C567D4D69179> /usr/lib/libbsm.0.dylib
0x112789000 -
0x1127a2ff7 com.apple.Ubiquity (1.3 - 289) <C7F1B734-CE81-334D-BE41-8B20D95A1F9B> /System/Library/PrivateFrameworks/Ubiquity.framework/Versions/A/Ubiquity
0x1127b7000 -
0x1127c2ff7 com.apple.NetAuth (5.0 - 5.0) <C811E662-9EC3-3B74-808A-A75D624F326B> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x1127d2000 -
0x112802fff com.apple.IconServices (25 - 25.17) <4751127E-FBD5-3ED5-8510-08D4E4166EFE> /System/Library/PrivateFrameworks/IconServices.framework/Versions/A/IconService s
0x11282f000 -
0x11289eff1 com.apple.ApplicationServices.ATS (360 - 363.3) <546E89D9-2AE7-3111-B2B8-2366650D22F0> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x1128d1000 -
0x11295afff com.apple.ColorSync (4.9.0 - 4.9.0) <B756B908-9AD1-3F5D-83F9-7A0B068387D2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x1129a8000 -
0x1129edff6 com.apple.HIServices (1.23 - 468) <5970AF5C-F5BD-3B6A-97C9-95B2CA98D71D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x112a24000 -
0x112a33ff8 com.apple.LangAnalysis (1.7.0 - 1.7.0) <8FE131B6-1180-3892-98F5-C9C9B79072D4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x112a43000 -
0x112a90ff2 com.apple.print.framework.PrintCore (9.0 - 428) <8D8253E3-302F-3DB2-9C5C-572CB974E8B3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x112ac0000 -
0x112af9ff7 com.apple.QD (3.50 - 298) <C1F20764-DEF0-34CF-B3AB-AB5480D64E66> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x112b1b000 -
0x112b24fff com.apple.speech.synthesis.framework (4.7.1 - 4.7.1) <383FB557-E88E-3239-82B8-15F9F885B702> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x112b3c000 -
0x112b4dff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
0x112b57000 -
0x112b5affc com.apple.IOSurface (91.1 - 91.1) <D00EEB0C-8AA8-3986-90C1-C97B2486E8FA> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x112b6a000 -
0x112b6afff com.apple.Accelerate (1.9 - Accelerate 1.9) <509BB27A-AE62-366D-86D8-0B06D217CF56> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x112b73000 -
0x112b77ff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
0x112b83000 -
0x112b8dfff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
0x112b9e000 -
0x112ba5fff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
0x112bb6000 -
0x112bbdff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
0x112bc8000 -
0x112c16fff libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
0x112c2d000 -
0x112c47fff libdispatch.dylib (339.92.1) <C4E4A18D-3C3B-3C9C-8709-A4270D998DE7> /usr/lib/system/libdispatch.dylib
0x112c67000 -
0x112c6aff7 libdyld.dylib (239.4) <7C9EC3B7-DDE3-33FF-953F-4067C743951D> /usr/lib/system/libdyld.dylib
0x112c77000 -
0x112c77ff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
0x112c82000 -
0x112c89ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
0x112c93000 -
0x112c98fff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
0x112ca3000 -
0x112ca5ff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
0x112cad000 -
0x112caeffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
0x112cb6000 -
0x112cc7ff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
0x112cd8000 -
0x112cd9ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
0x112ce5000 -
0x112d6eff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x112d9c000 -
0x112d9eff3 libsystem_configuration.dylib (596.15) <4998CB6A-9D54-390A-9F57-5D1AC53C135C> /usr/lib/system/libsystem_configuration.dylib
0x112da7000 -
0x112daffff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
0x112db6000 -
0x112dddffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
0x112df3000 -
0x112e0fff7 libsystem_kernel.dylib (2422.100.13) <498AEBD7-4194-3CF2-AA16-D5D03FFBD8C0> /usr/lib/system/libsystem_kernel.dylib
0x112e39000 -
0x112e68fd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
0x112e7a000 -
0x112e95ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x112ea1000 -
0x112ec8ff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
0x112ee7000 -
0x112ef0ff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
0x112efc000 -
0x112f02ff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x112f1b000 -
0x112f22ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x112f32000 -
0x112f33ff7 libsystem_sandbox.dylib (278.11) <B46E4040-A8C6-3EBC-91F8-F1CB01106614> /usr/lib/system/libsystem_sandbox.dylib
0x112f3f000 -
0x112f43ff7 libsystem_stats.dylib (93.90.3) <4E51D5B0-92A0-3D0D-B90E-495A1ED3E391> /usr/lib/system/libsystem_stats.dylib
0x112f50000 -
0x112f51fff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
0x112f5a000 -
0x112f5fff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
0x112f69000 -
0x112f8dfff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x112fad000 -
0x112fefff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
0x11300e000 -
0x113037ff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
0x113045000 -
0x113050fff libkxld.dylib (2422.100.13) <67D079F8-6C48-3F42-9FBE-26F1ADA03DC4> /usr/lib/system/libkxld.dylib
0x113056000 -
0x113340fff com.apple.CoreServices.CarbonCore (1077.17 - 1077.17) <3A2E92FD-DEE2-3D45-9619-11500801A61C> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x1133c4000 -
0x113454ff7 com.apple.Metadata (10.7.0 - 800.28) <E85AEB1B-CB17-38BC-B5C6-AAB50B47AF05> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x1134c2000 -
0x113539fff com.apple.CoreServices.OSServices (600.4 - 600.4) <C63562F5-6DF5-3EE9-8897-FF61A44C8251> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x1135e1000 -
0x11364efff com.apple.SearchKit (1.4.0 - 1.4.0) <B9B8D510-A27E-36B0-93E9-17146D9E9045> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x113695000 -
0x1136f0ffb com.apple.AE (665.5 - 665.5) <BBA230F9-144C-3CAB-A77A-0621719244CD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x113721000 -
0x1137eafff com.apple.LaunchServices (572.26 - 572.26) <EF8A4A15-0861-35C5-9744-5E1BC5C26DD9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x113864000 -
0x11388dfff com.apple.DictionaryServices (1.2 - 208) <A539A058-BA57-35EE-AA08-D0B0E835127D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x1138b3000 -
0x11399dfff libsqlite3.dylib (158) <00269BF9-43BE-39E0-9C85-24585B9923C8> /usr/lib/libsqlite3.dylib
0x1139b6000 -
0x113a9dff7 libxml2.2.dylib (26) <A1DADD11-89E5-3DE4-8802-07186225967F> /usr/lib/libxml2.2.dylib
0x113ad5000 -
0x113ae2ff7 libxar.1.dylib (202) <5572AA71-E98D-3FE1-9402-BB4A84E0E71E> /usr/lib/libxar.1.dylib
0x113af0000 -
0x113af4fff libpam.2.dylib (20) <B93CE8F5-DAA8-30A1-B1F6-F890509513CB> /usr/lib/libpam.2.dylib
0x113afb000 -
0x113afbffd libOpenScriptingUtil.dylib (157) <19F0E769-0989-3062-9AFB-8976E90E9759> /usr/lib/libOpenScriptingUtil.dylib
0x113aff000 -
0x113b0cff0 libbz2.1.0.dylib (29) <0B98AC35-B138-349C-8063-2B987A75D24C> /usr/lib/libbz2.1.0.dylib
0x113b19000 -
0x113b1afff liblangid.dylib (117) <9546E641-F730-3AB0-B3CD-E0E2FDD173D9> /usr/lib/liblangid.dylib
0x113b21000 -
0x113b3cff7 libCRFSuite.dylib (34) <FFAE75FA-C54E-398B-AA97-18164CD9789D> /usr/lib/libCRFSuite.dylib
0x113b4c000 -
0x113bb0fff com.apple.datadetectorscore (5.0 - 354.4) <37093186-6019-3071-8D67-F3EF429F8F08> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x113bf4000 -
0x113bf7fff com.apple.TCC (1.0 - 1) <32A075D9-47FD-3E71-95BC-BFB0D583F41C> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
0x113c02000 -
0x113c19ff7 com.apple.CFOpenDirectory (10.9 - 173.90.1) <EBC0A1F2-9054-3D39-99AE-A3F655E55D6A> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x113c38000 -
0x113c42ff7 com.apple.bsd.ServiceManagement (2.0 - 2.0) <2D27B498-BB9C-3D88-B05A-76908A8A26F3> /System/Library/Frameworks/ServiceManagement.framework/Versions/A/ServiceManage ment
0x113c50000 -
0x113c78ffb libxslt.1.dylib (13) <C9794936-633C-3F0C-9E71-30190B9B41C1> /usr/lib/libxslt.1.dylib
0x113c8b000 -
0x113f5ffc7 com.apple.vImage (7.0 - 7.0) <D241DBFA-AC49-31E2-893D-EAAC31890C90> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x113fa7000 -
0x113fa7fff com.apple.Accelerate.vecLib (3.9 - vecLib 3.9) <F8D0CC77-98AC-3B58-9FE6-0C25421827B6> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x113fad000 -
0x114078fff libvDSP.dylib (423.32) <3BF732BE-DDE0-38EB-8C54-E4E3C64F77A7> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x114089000 -
0x114139ff7 libvMisc.dylib (423.32) <049C0735-1808-39B9-943F-76CB8021744F> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x11414b000 -
0x11452cffe libLAPACK.dylib (1094.5) <7E7A9B8D-1638-3914-BAE0-663B69865986> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x114595000 -
0x114703ff7 libBLAS.dylib (1094.5) <DE93A590-5FA5-32A2-A16C-5D7D7361769F> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x11472f000 -
0x11481efff libFontParser.dylib (111.1) <835A8253-6AB9-3AAB-9CBF-171440DEC486> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x11489a000 -
0x1148e1fff libFontRegistry.dylib (127) <A77A0480-AA5D-3CC8-8B68-69985CD546DC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
0x11490d000 -
0x114931ff7 libJPEG.dylib (1043) <25723F3F-48A6-3AC5-A7A3-58E418FEBF3F> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x11493a000 -
0x114993fff libTIFF.dylib (1043) <D7CAE68F-6087-3B40-9CB8-EC6DB47BF877> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x1149a7000 -
0x1149c2ff7 libPng.dylib (1043) <23D2DAB7-C9A9-392F-989A-871E89E7751D> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib
0x1149d2000 -
0x1149d6ff7 libGIF.dylib (1043) <AF0FE71A-27AB-31E0-8CEA-BC0BF2091FA8> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x1149db000 -
0x114ac9fff libJP2.dylib (1043) <C4031D64-6C57-3FB4-9D87-874D387381DB> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x114af5000 -
0x114af7fff libRadiance.dylib (1043) <9813995C-DEAA-3992-8DF8-320E4E4E288B> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.d ylib
0x114afc000 -
0x114b43ff7 libcups.2.dylib (372.4) <36EA4350-43B4-3A5C-9904-10685BFDA7D4> /usr/lib/libcups.2.dylib
0x114b5c000 -
0x114b75ff7 com.apple.Kerberos (3.0 - 1) <F108AFEB-198A-3BAF-BCA5-9DFCE55EFF92> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x114b92000 -
0x114bc1ff9 com.apple.GSS (4.0 - 2.0) <44E914BE-B0D0-3E05-9451-CA9E539AFA52> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
0x114be6000 -
0x114c02fff libresolv.9.dylib (54) <11C2C826-F1C6-39C6-B4E8-6E0C41D4FA95> /usr/lib/libresolv.9.dylib
0x114c11000 -
0x114d02ff9 libiconv.2.dylib (41) <BB44B115-AC32-3877-A0ED-AEC6232A4563> /usr/lib/libiconv.2.dylib
0x114d19000 -
0x114d7effb com.apple.Heimdal (4.0 - 2.0) <F34D6627-9F80-3823-8B57-DB629307DF87> /System/Library/PrivateFrameworks/Heimdal.framework/Versions/A/Heimdal
0x114dad000 -
0x114daefff com.apple.TrustEvaluationAgent (2.0 - 25) <334A82F4-4AE4-3719-A511-86D0B0723E2B> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x114db3000 -
0x114db7ff7 libheimdal-asn1.dylib (323.92.1) <CAE21FFF-5763-399C-B7C5-EEBFFEEF2242> /usr/lib/libheimdal-asn1.dylib
0x114dbe000 -
0x114dcaff7 com.apple.OpenDirectory (10.9 - 173.90.1) <256C265B-7FA6-326D-9F60-18DADF5F3A0E> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x114ddf000 -
0x114de8ffd com.apple.CommonAuth (4.0 - 2.0) <32BA436F-6319-3A0B-B5D2-2EB75FF36B5B> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth
0x114df5000 -
0x114e46ff3 com.apple.audio.CoreAudio (4.2.0 - 4.2.0) <BF4C2FE3-8BC8-30D1-8347-2A7221268794> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x114e6f000 -
0x114e87ff7 com.apple.GenerationalStorage (2.0 - 160.3) <64749B08-0212-3AC8-9B49-73D662B09304> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x114e9a000 -
0x114ebfff7 com.apple.ChunkingLibrary (2.0 - 155.1) <B845DC7A-D1EA-31E2-967C-D1FE0C628036> /System/Library/PrivateFrameworks/ChunkingLibrary.framework/Versions/A/Chunking Library
0x114ecf000 -
0x114edbff3 com.apple.AppleFSCompression (56 - 1.0) <5652B0D0-EB08-381F-B23A-6DCF96991FB5> /System/Library/PrivateFrameworks/AppleFSCompression.framework/Versions/A/Apple FSCompression
0x114ee9000 -
0x114ef4ff7 com.apple.DirectoryService.Framework (10.9 - 173.90.1) <B62B1994-1874-3F8D-B62E-589E6F6534C9> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x114f02000 -
0x114f05ff7 com.apple.LoginUICore (3.0 - 3.0) <1ECBDA90-D6ED-3333-83EB-9C8232DFAD7C> /System/Library/PrivateFrameworks/LoginUIKit.framework/Versions/A/Frameworks/Lo ginUICore.framework/Versions/A/LoginUICore
0x114f0d000 -
0x114f0eff7 libodfde.dylib (20) <C00A4EBA-44BC-3C53-BFD0-819B03FFD462> /usr/lib/libodfde.dylib
0x114f14000 -
0x114fccff7 com.apple.DiscRecording (8.0 - 8000.4.6) <CDAAAD04-A1D0-3C67-ABCC-EFC9E8D44E7E> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x115038000 -
0x11507dfff libcurl.4.dylib (78.92.2) <FE790105-B56B-3972-96F4-E133764FF735> /usr/lib/libcurl.4.dylib
0x115092000 -
0x1150c3fff com.apple.MediaKit (15 - 709) <23E33409-5C39-3F93-9E73-2B0E9EE8883E> /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x1150db000 -
0x1150ddfff com.apple.EFILogin (2.0 - 2) <C360E8AF-E9BB-3BBA-9DF0-57A92CEF00D4> /System/Library/PrivateFrameworks/EFILogin.framework/Versions/A/EFILogin
0x1150e5000 -
0x1150e7ffb libutil.dylib (34) <DAC4A6CF-A1BB-3874-9569-A919316D30E8> /usr/lib/libutil.dylib
0x1150ee000 -
0x1150f4fff com.apple.AOSNotification (1.7.0 - 760.3) <7901B867-60F7-3645-BB3E-18C51A6FBCC6> /System/Library/PrivateFrameworks/AOSNotification.framework/Versions/A/AOSNotif ication
0x115106000 -
0x11513bffc com.apple.LDAPFramework (2.4.28 - 194.5) <4ADD0595-25B9-3F09-897E-3FB790AD2C5A> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x11514f000 -
0x11515fffb libsasl2.2.dylib (170) <C8E25710-68B6-368A-BF3E-48EC7273177B> /usr/lib/libsasl2.2.dylib
0x11516c000 -
0x11524bfff libcrypto.0.9.8.dylib (50) <B95B9DBA-39D3-3EEF-AF43-44608B28894E> /usr/lib/libcrypto.0.9.8.dylib
0x1152b4000 -
0x1152e8fff libssl.0.9.8.dylib (50) <B15F967C-B002-36C2-9621-3456D8509F50> /usr/lib/libssl.0.9.8.dylib
0x115302000 -
0x11533aff7 com.apple.RemoteViewServices (2.0 - 94) <3F34D630-3DDB-3411-BC28-A56A9B55EBDA> /System/Library/PrivateFrameworks/RemoteViewServices.framework/Versions/A/Remot eViewServices
0x11537a000 -
0x11537affd com.apple.audio.units.AudioUnit (1.10 - 1.10) <68B21135-55A6-3563-A3D6-3E692A7DEB7F> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x115384000 -
0x1155ccff7 com.apple.CoreData (107 - 481.3) <E78734AA-E3D0-33CB-A014-620BBCAB2E96> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x1156f6000 -
0x1156feff7 com.apple.speech.recognition.framework (4.2.4 - 4.2.4) <98BBB3E4-6239-3EF1-90B2-84EA0D3B8D61> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x11570b000 -
0x11571dff7 com.apple.MultitouchSupport.framework (245.13 - 245.13) <E51DE5CA-9859-3C13-A24F-37EF4385C1D6> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x115733000 -
0x1157bfff7 com.apple.ink.framework (10.9 - 207) <8A50B893-AD03-3826-8555-A54FEAF08F47> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x1157f7000 -
0x11581cff7 com.apple.CoreVideo (1.8 - 117.2) <4674339E-26D0-35FA-9958-422832B39B12> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x11583c000 -
0x115b0cffc com.apple.CoreImage (9.2.8) <1509987F-5671-3AE3-91C7-18E952ED90C7> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/CoreImage .framework/Versions/A/CoreImage
0x115c01000 -
0x115c54fff com.apple.ScalableUserInterface (1.0 - 1) <CF745298-7373-38D2-B3B1-727D5A569E48> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/ScalableU serInterface.framework/Versions/A/ScalableUserInterface
0x115c7c000 -
0x115cbbfff libGLU.dylib (9.6.1) <AE032555-3E2F-3DBF-A26D-EA4576061605> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x115cce000 -
0x115cd6ffc libGFXShared.dylib (9.6.1) <25BBF325-AC57-3BAA-9427-2D14CC243AE6> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x115ce3000 -
0x115ceefff libGL.dylib (9.6.1) <4B65BF9F-F34A-3CD1-94E8-DB26DAA0A59D> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x115d03000 -
0x115d41ff7 libGLImage.dylib (9.6.1) <5E02B38C-9F36-39BE-8746-724F0D8BBFC0> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x115d4f000 -
0x115d51fff libCVMSPluginSupport.dylib (9.6.1) <FB37F4C4-1E84-3349-BB03-92CA0A5F6837> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCVMSPluginS upport.dylib
0x115d5c000 -
0x115d5ffff libCoreVMClient.dylib (58.1) <EBC36C69-C896-3C3D-8589-3E9023E7E56F> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x115d68000 -
0x11619bffb com.apple.vision.FaceCore (3.0.0 - 3.0.0) <F42BFC9C-0B16-35EF-9A07-91B7FDAB7FC5> /System/Library/PrivateFrameworks/FaceCore.framework/Versions/A/FaceCore
0x1163b9000 -
0x1163c3ff7 com.apple.CrashReporterSupport (10.9 - 539) <B25A09EC-A021-32EC-86F8-05B4837E0EDE> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x1163d5000 -
0x116423ff7 com.apple.opencl (2.3.59 - 2.3.59) <044485A4-A50C-34CE-A1F9-35A50CC68313> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
0x116440000 -
0x1164c1fff com.apple.CoreSymbolication (3.0.1 - 141.0.5) <20E484C4-9F0E-3DF6-BB27-D509859FF57A> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSy mbolication
0x116515000 -
0x11656dff7 com.apple.Symbolication (1.4 - 129.0.2) <B1F008C4-184D-36A2-922F-4A67A075D512> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
0x1165bb000 -
0x1165eafff com.apple.DebugSymbols (106 - 106) <E1BDED08-523A-36F4-B2DA-9D5C712F0AC7> /System/Library/PrivateFrameworks/DebugSymbols.framework/Versions/A/DebugSymbol s
0x116606000 -
0x11660ffff com.apple.DisplayServicesFW (2.8 - 360.8.14) <816A9CED-1BC0-3C76-8103-1B9BE0F723BB> /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
0x11661e000 -
0x11675ffff com.apple.QTKit (7.7.3 - 2826.19) <E634E6EC-2C7A-3F86-997B-CFC5D9F89E6B> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
0x116878000 -
0x116913ff7 com.apple.PDFKit (2.9.2 - 2.9.2) <0CDC6467-9227-3D98-B4D4-660796AE9F6B> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x116987000 -
0x116eaafff com.apple.QuartzComposer (5.1 - 319) <8B90921F-911B-3240-A1D5-3C084F3E6A36> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x1171cc000 -
0x1171f0fff com.apple.quartzfilters (1.8.0 - 1.7.0) <39C08086-9866-372F-9420-81F5689149DF> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzFilters .framework/Versions/A/QuartzFilters
0x117220000 -
0x117226ff7 com.apple.XPCService (2.0 - 1) <2CE632D7-FE57-36CF-91D4-C57D0F2E0BFE> /System/Library/PrivateFrameworks/XPCService.framework/Versions/A/XPCService
0x117235000 -
0x117357fff com.apple.avfoundation (2.0 - 651.12.1) <FF001F98-E198-3B1D-A7EB-A8C48E6E34A3> /System/Library/Frameworks/AVFoundation.framework/Versions/A/AVFoundation
0x117473000 -
0x1174bcfff com.apple.CoreMedia (1.0 - 1273.54) <CAB7303A-9AB2-317A-99C3-BEAA8AE8764B> /System/Library/Frameworks/CoreMedia.framework/Versions/A/CoreMedia
0x1174ec000 -
0x117822fff com.apple.MediaToolbox (1.0 - 1273.54) <E11683F7-BB60-37EB-98B6-BD519D93CB30> /System/Library/Frameworks/MediaToolbox.framework/Versions/A/MediaToolbox
0x1178d0000 -
0x117d1efef com.apple.VideoToolbox (1.0 - 1273.54) <4699BB55-7387-3981-9217-869215F00CA9> /System/Library/Frameworks/VideoToolbox.framework/Versions/A/VideoToolbox
0x117d7b000 -
0x117d7bfff com.apple.Carbon (154 - 157) <EFC1A1C0-CB07-395A-B038-CFA2E71D3E69> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x117d7e000 -
0x117d94fff com.apple.CoreMediaAuthoring (2.2 - 947) <F1886A05-1C29-3F88-88C0-4A1013530AD1> /System/Library/PrivateFrameworks/CoreMediaAuthoring.framework/Versions/A/CoreM ediaAuthoring
0x117dad000 -
0x117df9ffe com.apple.CoreMediaIO (407.0 - 4561) <040A98E4-F480-315B-BCEE-C18AF686492C> /System/Library/Frameworks/CoreMediaIO.framework/Versions/A/CoreMediaIO
0x117e24000 -
0x117e3bffa libAVFAudio.dylib (32.2) <52DA516B-DE79-322C-9E1B-2658019289D7> /System/Library/Frameworks/AVFoundation.framework/Versions/A/Resources/libAVFAu dio.dylib
0x117e53000 -
0x117f82fef com.apple.MediaControlSender (2.0 - 200.34.4) <FC24EC8D-2E46-3F76-AF63-749F30857B96> /System/Library/PrivateFrameworks/MediaControlSender.framework/Versions/A/Media ControlSender
0x117fbc000 -
0x117febff7 com.apple.CoreAVCHD (5.7.0 - 5700.4.3) <404369C0-ED9F-3010-8D2F-BC55285F7808> /System/Library/PrivateFrameworks/CoreAVCHD.framework/Versions/A/CoreAVCHD
0x117ff9000 -
0x117ffeff7 com.apple.MediaAccessibility (1.0 - 43) <D309D83D-5FAE-37A4-85ED-FFBDA8B66B82> /System/Library/Frameworks/MediaAccessibility.framework/Versions/A/MediaAccessi bility
0x11800d000 -
0x11800ffff com.apple.Mangrove (1.0 - 1) <72F5CBC7-4E78-374E-98EA-C3700136904E> /System/Library/PrivateFrameworks/Mangrove.framework/Versions/A/Mangrove
0x11801c000 -
0x1183f3fef com.apple.CoreAUC (6.25.00 - 6.25.00) <2D7DC96C-BA83-3220-A03F-C790D50A23D8> /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
0x118405000 -
0x118422ff7 com.apple.framework.Apple80211 (9.3.2 - 932.59) <DA61BF63-978E-342D-8F7F-83D0169A7F48> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x118434000 -
0x11843cff7 com.apple.AppleSRP (5.0 - 1) <ABC7F088-1FD5-3768-B9F3-847F355E90B3> /System/Library/PrivateFrameworks/AppleSRP.framework/Versions/A/AppleSRP
0x118448000 -
0x1184afff7 com.apple.CoreUtils (2.0 - 200.34.4) <E53B97FE-E067-33F6-A9C1-D4EC2A20FB9F> /System/Library/PrivateFrameworks/CoreUtils.framework/Versions/A/CoreUtils
0x1184e0000 -
0x11853ffff com.apple.framework.CoreWLAN (4.3.3 - 433.48) <7F86A7C3-7B7D-3CD7-9758-CA74FB4DE2CC> /System/Library/Frameworks/CoreWLAN.framework/Versions/A/CoreWLAN
0x118584000 -
0x1185aeff7 libpcap.A.dylib (42) <91D3FF51-D6FE-3C05-98C9-1182E0EC3D58> /usr/lib/libpcap.A.dylib
0x1185c3000 -
0x118629fff com.apple.framework.CoreWiFi (2.0 - 200.21.1) <5491896D-78C5-30B6-96E9-D8DDECF3BE73> /System/Library/Frameworks/CoreWiFi.framework/Versions/A/CoreWiFi
0x118688000 -
0x1186d5fff com.apple.AppleVAFramework (5.0.27 - 5.0.27) <608D91BD-9D88-3FAB-9A06-24C1DAEA092D> /System/Library/PrivateFrameworks/AppleVA.framework/Versions/A/AppleVA
0x1186e3000 -
0x1186edff7 com.apple.AppSandbox (3.0 - 1) <9F27DC25-C566-3AEF-92D3-DCFE7836916D> /System/Library/PrivateFrameworks/AppSandbox.framework/Versions/A/AppSandbox
0x1186f9000 -
0x118723ff7 libsandbox.1.dylib (278.11) <BD3D8652-8871-36DB-A27D-3BE4F18428B4> /usr/lib/libsandbox.1.dylib
0x118730000 -
0x118743ff7 com.apple.AppContainer (3.0 - 1) <BD342039-430E-39FE-BC2D-8F97B557548E> /System/Library/PrivateFrameworks/AppContainer.framework/Versions/A/AppContaine r
0x11875d000 -
0x11875ffff com.apple.SecCodeWrapper (3.0 - 1) <DE7CA981-2B8B-34AC-845D-06D5C8F10441> /System/Library/PrivateFrameworks/SecCodeWrapper.framework/Versions/A/SecCodeWr apper
0x118765000 -
0x11876dfff libMatch.1.dylib (19) <021293AB-407D-309A-87F5-8E782F46753E> /usr/lib/libMatch.1.dylib
0x118776000 -
0x11877afff com.apple.CommonPanels (1.2.6 - 96) <6B434AFD-50F8-37C7-9A56-162C17E375B3> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x118785000 - -
HP DV6000 randomly freezing with Arch Linux
Hello,
Just to clarify I am working with Arch Linux as a Web Developer, therefore I do have special needs such as having 20+ tabs open with vital information in different pages.
I can assure that after using Windows XP, Windows 7, xUbuntu, Linux Mint and Ubuntu I have never had such breaks or freezes in this machine.
The freezes are identifiable when the mouse seems to be very slow to move, the computer very slow to respond, the cursor of the icon does not change within the context where it is, I can't even open the menu bar to access the terminal (using Terminator).
After noticing these randomly freezes, I've started to keep the Terminator open with top command inserted. After seeing the values of percentage usage in CPU or RAM, the levels don't even go up more than 20%. However, I notice that the laptop suddenly starts heating a lot.
The solution is just to wait with some luck about 10 minutes. If it does not go on after that, I need to turn off the computer by pressing the button or unplugging the battery (yeah, the battery is dead too).
Some main packages I currently use are:
- Cinnamon
- Filezilla
- Netbeans PHP IDE 8.0
- Skype
- Geany
- 7-Zip FM
- Adobe Flash Player
- Chromium (my main browser)
- Firefox
- SSH
- Htop
- VLC Media Player
- Terminator
Any ideas of what could it be?
Thanks!
Last edited by SirPereira (2014-05-19 14:52:56)Rexilion wrote:
It seems you do not have any swap. Correct?
Could you provide the output of dmesg after the occurance?
Yes, you are correct, I do not have any swap. Would I benefit from it? I guess I never used it.
After the occurance you mean, after the freeze? I will try to do it, but it is rare the case when the computer is able to not freeze at all.
Got it now:
The output of dmesg:
[ 0.443614] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.443838] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.444061] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.444184] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.444187] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.444190] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.444210] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.444213] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.444217] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.444237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.444239] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.444243] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.444266] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.444271] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.444290] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.444293] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.444295] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.444297] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[ 0.444298] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[ 0.444300] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[ 0.444305] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.444324] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.444329] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.444345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444399] intel_idle: does not run on family 6 model 23
[ 0.444441] GHES: HEST is not enabled!
[ 0.444500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.444971] Linux agpgart interface v0.103
[ 0.445012] rtc_cmos 00:03: RTC can wake from S4
[ 0.445141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.445167] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.445178] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.445322] TCP: cubic registered
[ 0.445446] NET: Registered protocol family 10
[ 0.445656] NET: Registered protocol family 17
[ 0.445905] registered taskstats version 1
[ 0.446529] Magic number: 14:681:877
[ 0.446613] rtc_cmos 00:03: setting system clock to 2014-05-20 08:51:33 UTC (1400575893)
[ 0.446705] PM: Hibernation image not present or could not be loaded.
[ 0.447929] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
[ 0.447931] Write protecting the kernel read-only data: 8192k
[ 0.450553] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
[ 0.451721] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
[ 0.458667] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.460077] systemd-udevd[47]: starting version 212
[ 0.478236] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.489263] ACPI: bus type USB registered
[ 0.489293] usbcore: registered new interface driver usbfs
[ 0.489304] usbcore: registered new interface driver hub
[ 0.494274] sdhci: Secure Digital Host Controller Interface driver
[ 0.494278] sdhci: Copyright(c) Pierre Ossman
[ 0.494499] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 0.494708] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 0.494739] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 0.494796] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 0.499195] usbcore: registered new device driver usb
[ 0.499671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.499940] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.500201] ehci-pci: EHCI PCI platform driver
[ 0.500769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.500777] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.500786] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.500808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[ 0.501200] hub 1-0:1.0: USB hub found
[ 0.501209] hub 1-0:1.0: 2 ports detected
[ 0.501580] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.501587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.501593] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.501626] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[ 0.503178] SCSI subsystem initialized
[ 0.503409] hub 2-0:1.0: USB hub found
[ 0.503419] hub 2-0:1.0: 2 ports detected
[ 0.503907] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.503914] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 0.503929] ehci-pci 0000:00:1a.7: debug port 1
[ 0.507842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.507859] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdd005c00
[ 0.508093] libata version 3.00 loaded.
[ 0.508752] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.513351] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513563] hub 3-0:1.0: USB hub found
[ 0.513629] hub 3-0:1.0: 4 ports detected
[ 0.536813] hub 1-0:1.0: USB hub found
[ 0.536828] hub 1-0:1.0: 2 ports detected
[ 0.556530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.560059] hub 2-0:1.0: USB hub found
[ 0.560067] hub 2-0:1.0: 2 ports detected
[ 0.560345] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.560352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.560366] ehci-pci 0000:00:1d.7: debug port 1
[ 0.563401] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[ 0.568179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.568198] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdd005800
[ 0.576683] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.576856] hub 4-0:1.0: USB hub found
[ 0.576865] hub 4-0:1.0: 8 ports detected
[ 0.577213] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.577220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.577228] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.577249] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[ 0.577420] hub 5-0:1.0: USB hub found
[ 0.577429] hub 5-0:1.0: 2 ports detected
[ 0.577678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.577684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.577691] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.577712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[ 0.577877] hub 6-0:1.0: USB hub found
[ 0.577885] hub 6-0:1.0: 2 ports detected
[ 0.578124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.578130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.578136] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.578156] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[ 0.578323] hub 7-0:1.0: USB hub found
[ 0.578331] hub 7-0:1.0: 2 ports detected
[ 0.578566] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.578573] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.578579] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.578609] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[ 0.578778] hub 8-0:1.0: USB hub found
[ 0.578786] hub 8-0:1.0: 2 ports detected
[ 0.579138] ahci 0000:00:1f.2: version 3.0
[ 0.579314] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.579386] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.579390] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 0.597458] scsi0 : ahci
[ 0.597577] scsi1 : ahci
[ 0.597688] scsi2 : ahci
[ 0.597787] scsi3 : ahci
[ 0.597890] scsi4 : ahci
[ 0.597988] scsi5 : ahci
[ 0.598049] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 46
[ 0.598053] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 46
[ 0.598054] ata3: DUMMY
[ 0.598056] ata4: DUMMY
[ 0.598058] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 46
[ 0.598060] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 46
[ 0.916700] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.916718] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.063421] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
[ 1.083353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.083369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.083987] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG002C, max UDMA/100
[ 1.083990] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.084680] ata1.00: configured for UDMA/100
[ 1.084792] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[ 1.087088] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[ 1.092125] ata2.00: configured for UDMA/100
[ 1.113361] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.203938] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
[ 1.208648] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.208739] sd 0:0:0:0: [sda] Write Protect is off
[ 1.208743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.208779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.290173] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.323084] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.323088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.323226] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.325332] usbcore: registered new interface driver usbhid
[ 1.325335] usbhid: USB HID core driver
[ 1.325918] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:045E:0750.0001/input/input2
[ 1.326088] hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input0
[ 1.336169] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/0003:045E:0750.0002/input/input3
[ 1.336217] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input1
[ 1.418377] sda: sda1 sda2
[ 1.418731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426688] tsc: Refined TSC clocksource calibration: 2394.269 MHz
[ 1.446699] usb 4-4: new high-speed USB device number 3 using ehci-pci
[ 2.115101] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.200031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.385422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0003/input/input4
[ 2.385472] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.426729] Switched to clocksource tsc
[ 2.490018] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 2.502963] random: nonblocking pool is initialized
[ 2.721320] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.721454] systemd[1]: Detected architecture 'x86-64'.
[ 2.739429] systemd[1]: Set hostname to <arch>.
[ 3.632105] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.755410] systemd[1]: Starting Login Prompts.
[ 3.755928] systemd[1]: Reached target Login Prompts.
[ 3.755939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.755992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.756002] systemd[1]: Starting Remote File Systems.
[ 3.756478] systemd[1]: Reached target Remote File Systems.
[ 3.756488] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 3.756839] systemd[1]: Starting Encrypted Volumes.
[ 3.757313] systemd[1]: Reached target Encrypted Volumes.
[ 3.757330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.757364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.757373] systemd[1]: Starting Paths.
[ 3.757845] systemd[1]: Reached target Paths.
[ 3.757866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.758419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.758432] systemd[1]: Starting Swap.
[ 3.758902] systemd[1]: Reached target Swap.
[ 3.758913] systemd[1]: Expecting device dev-disk-by\x2duuid-3e31eb5f\x2d326a\x2d4cd0\x2daab3\x2d7d1e7ac0797b.device...
[ 3.759249] systemd[1]: Starting Root Slice.
[ 3.766515] systemd[1]: Created slice Root Slice.
[ 3.766527] systemd[1]: Starting User and Session Slice.
[ 3.767173] systemd[1]: Created slice User and Session Slice.
[ 3.767184] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.767681] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.767691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.768180] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.768189] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.768677] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.768687] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.769176] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.769189] systemd[1]: Starting udev Control Socket.
[ 3.769676] systemd[1]: Listening on udev Control Socket.
[ 3.769688] systemd[1]: Starting udev Kernel Socket.
[ 3.770181] systemd[1]: Listening on udev Kernel Socket.
[ 3.770192] systemd[1]: Starting Journal Socket.
[ 3.770700] systemd[1]: Listening on Journal Socket.
[ 3.770716] systemd[1]: Starting System Slice.
[ 3.771341] systemd[1]: Created slice System Slice.
[ 3.771357] systemd[1]: Started File System Check on Root Device.
[ 3.771365] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.772001] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.772011] systemd[1]: Mounting Temporary Directory...
[ 3.790231] systemd[1]: Starting system-netctl.slice.
[ 3.790914] systemd[1]: Created slice system-netctl.slice.
[ 3.790930] systemd[1]: Starting system-getty.slice.
[ 3.791567] systemd[1]: Created slice system-getty.slice.
[ 3.809849] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.852492] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.876658] systemd[1]: Starting Apply Kernel Variables...
[ 3.877416] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.878150] systemd[1]: Mounting Huge Pages File System...
[ 3.878884] systemd[1]: Starting udev Coldplug all Devices...
[ 3.879636] systemd[1]: Starting Setup Virtual Console...
[ 3.880782] systemd[1]: Started Load Kernel Modules.
[ 3.880820] systemd[1]: Mounting Configuration File System...
[ 3.881579] systemd[1]: Mounting Debug File System...
[ 3.882319] systemd[1]: Mounted FUSE Control File System.
[ 3.882346] systemd[1]: Starting Journal Service...
[ 3.883635] systemd[1]: Started Journal Service.
[ 4.312288] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.431925] systemd-udevd[146]: starting version 212
[ 5.513427] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.513433] ACPI: Power Button [PWRB]
[ 5.513493] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 5.513777] ACPI: Lid Switch [LID0]
[ 5.513831] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 5.513834] ACPI: Sleep Button [SLPB]
[ 5.513911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.513914] ACPI: Power Button [PWRF]
[ 5.596907] ACPI: AC Adapter [ACAD] (on-line)
[ 5.645033] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.657955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.661096] acpi device:08: registered as cooling_device0
[ 5.663657] acpi device:0a: registered as cooling_device1
[ 5.663725] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input9
[ 5.708497] hp_accel: laptop model unknown, using default axes configuration
[ 5.720053] lis3lv02d: 8 bits sensor found
[ 5.729279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791571] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[ 5.791574] ene_ir: PLL freq = 1406
[ 5.791575] ene_ir: KB3926C detected
[ 5.791586] ene_ir: Firmware regs: 00 00
[ 5.791587] ene_ir: Hardware features:
[ 5.791589] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 5.821208] Monitor-Mwait will be used to enter C-1 state
[ 5.821217] Monitor-Mwait will be used to enter C-2 state
[ 5.821221] Monitor-Mwait will be used to enter C-3 state
[ 5.821225] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.821242] ACPI: acpi_idle registered with cpuidle
[ 5.821270] Switched to clocksource hpet
[ 5.827916] Registered IR keymap rc-rc6-mce
[ 5.828003] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[ 5.828066] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 5.840895] ene_ir: driver has been successfully loaded
[ 5.848018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 5.877265] IR JVC protocol handler initialized
[ 5.878491] IR NEC protocol handler initialized
[ 5.879175] IR RC6 protocol handler initialized
[ 5.880281] IR RC5(x) protocol handler initialized
[ 5.880739] IR SANYO protocol handler initialized
[ 5.881059] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
[ 5.881065] IR MCE Keyboard/mouse protocol handler initialized
[ 5.881065] IR Sony protocol handler initialized
[ 5.881758] lirc_dev: IR Remote Control driver registered, major 249
[ 5.882267] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 5.882270] IR LIRC bridge handler initialized
[ 5.891466] [Firmware Bug]: Invalid critical threshold (0)
[ 5.892123] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.892126] ACPI: Thermal Zone [TZ01] (31 C)
[ 5.903447] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
[ 5.903835] wmi: Mapper loaded
[ 5.927466] ACPI: Battery Slot [BAT0] (battery present)
[ 6.029419] [drm] Initialized drm 1.1.0 20060810
[ 6.114983] cfg80211: Calling CRDA to update world regulatory domain
[ 6.137776] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20131218/utaddress-258)
[ 6.137785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\GPIO) (20131218/utaddress-258)
[ 6.137793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137822] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.180252] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 6.180255] Copyright(c) 2003- 2014 Intel Corporation
[ 6.180475] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 6.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.287960] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
[ 6.288149] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000584a000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 49
[ 6.288152] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.345229] mousedev: PS/2 mouse device common for all mice
[ 6.436120] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[ 6.436128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.526671] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.535077] media: Linux media interface: v0.10
[ 6.569608] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.569745] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.570548] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.570639] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.570714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.581760] input: PC Speaker as /devices/platform/pcspkr/input/input18
[ 6.599116] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 6.683172] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.683177] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 6.683179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.683182] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 6.683232] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.701985] Linux video capture interface: v2.00
[ 6.780556] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.922833] nvidia: module license 'NVIDIA' taints kernel.
[ 6.922839] Disabling lock debugging due to kernel taint
[ 6.939605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.939882] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.939892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.12 Fri Apr 4 14:51:15 PDT 2014
[ 6.991292] iTCO_vendor_support: vendor-support=0
[ 6.991687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.991726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.991831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.064547] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 7.066862] systemd-udevd[153]: renamed network interface eth0 to enp3s0
[ 7.089277] Bluetooth: Core ver 2.18
[ 7.089304] NET: Registered protocol family 31
[ 7.089306] Bluetooth: HCI device and connection manager initialized
[ 7.089316] Bluetooth: HCI socket layer initialized
[ 7.089319] Bluetooth: L2CAP socket layer initialized
[ 7.089331] Bluetooth: SCO socket layer initialized
[ 7.097641] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 7.119889] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:010f)
[ 7.125560] usbcore: registered new interface driver btusb
[ 7.136432] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input20
[ 7.136523] usbcore: registered new interface driver uvcvideo
[ 7.136525] USB Video Class driver (1.1.1)
[ 7.162108] kvm: disabled by bios
[ 7.167498] systemd-udevd[149]: renamed network interface wlan0 to wlp2s0
[ 7.515656] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[ 7.594362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 7.949749] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.055002] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 13.835532] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.838466] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.935096] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.938046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.964225] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.845976] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 20.903153] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 20.906517] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 20.909113] wlp2s0: authenticated
[ 20.910074] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 20.913437] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 20.918955] wlp2s0: associated
[ 20.919008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.089546] wlp2s0: deauthenticating from b8:c7:5d:02:3b:9d by local choice (reason=2)
[ 21.096263] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 21.099042] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 21.099780] cfg80211: Calling CRDA for country: AT
[ 21.101974] wlp2s0: authenticated
[ 21.103555] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 21.108457] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 21.115231] wlp2s0: associated
[ 26.591580] fuse init (API version 7.22)
[ 148.105211] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 148.107797] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 1/3)
[ 148.108518] cfg80211: Calling CRDA to update world regulatory domain
[ 148.310034] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 2/3)
[ 148.513366] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 3/3)
[ 148.514272] wlp2s0: authenticated
[ 148.516865] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 148.517652] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 148.519034] wlp2s0: associated
[ 148.531940] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 231.077026] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 231.080206] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 231.081422] cfg80211: Calling CRDA to update world regulatory domain
[ 231.082756] wlp2s0: authenticated
[ 231.083955] wlp2s0: waiting for beacon from b8:c7:5d:02:3b:9d
[ 231.362261] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 231.365917] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 1/3)
[ 231.380479] wlp2s0: authenticated
[ 231.383400] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 231.386425] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 231.390072] wlp2s0: associated
[ 231.481241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 311.833862] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 3074.285425] Watchdog[977]: segfault at 0 ip 00007f42693ed9b8 sp 00007f4251f777d0 error 6 in chromium[7f4265a4e000+55d7000]
[ 3166.859073] chromium[1212]: segfault at 39 ip 00007f7ddd6a7280 sp 00007fff9d984088 error 6 in chromium[7f7ddcefc000+55d7000]
[ 3172.385333] chromium[1169]: segfault at fbadbeef ip 00007f7ddf63345d sp 00007fff9d983f20 error 6 in chromium[7f7ddcefc000+55d7000] -
Fusion Drive on a 2010 iMac with 2tb HDD & 256gb SSD
Hi,
well basicailly the title says it all!
I have a 2010 iMac with the 256gb SSD and 2TB HDD which to me seems like it would be great option for the Fusion Drive...
Does anyone have any ideas on how I could make the drives work like the new Fusion Drive?
I've seen the Macworld Tutorial on a DIY Fusion Drive but i'm still not sure if doing that will work in the same way as the preinstalled 2012 iMac Fusion Drive... I know that Mac OSX will treat the combined drives as one, but in terms of moving files depending upon their usage is another matter.
If the Macworld step by step is followed will Mountain Lion handle frequently used files / apps like the apple presentation states or will it just use the drives as one and not increase the performance of my machine?
Any help on this would be much appreciated, especially if anyone has followed the Macworld steps etc!
Thanks
DarrenThanks fir the reply, I thought with the fusion drive the SSD and HDD were two seperate storage devices seen by OSX as one volume, and the software determins where the files most used will be placed and accessed from.
I've read a bit about this here;
http://macs.about.com/od/diyguidesprojects/ss/Setting-Up-A-Fusion-Drive-On-Your- Current-Mac.htm
but would be great to hear first hand experience!!
With this DIY approach it appears that the same functionality of the 2012 iMacs is achieved but simply not using the older Disk Utility, but a newer version only included on the newer models... -
Problem when Installing from Existing Linux with Arch's Image
Hey!
I'm just getting started with Arch Linux. I made a 20GB unallocated space between my Win7 and Ubuntu partitions, created a new ext4 partition and I'm currently following this guide ("another method" section) in order to install my first attempt of Arch Linux.
I'm on a 64-bit Ubuntu and want to install a 64-bit Arch Linux too, so I'm using the image archlinux-2011.08.19-core-x86_64.iso and in the process of following the instructions in the mentioned guide, I replaced i686 by x86_64.
The problem comes up when I try to do the chrooting, where I get:
chroot: failed to run command `/bin/bash': No such file or directory
Any idea what could I be doing wrong?
Thanks!Ok, I had just messed up when mounting the different directories. Sorry for the noise...
Anyway, found more errors when running:
aif -p interactive
about not finding /lib/modules/3.0.0-13-generic/modules.dep... what makes me think that this guide is intended to be followed when running also an Arch as the Existing Linux.
I think I'll just go with the flash drive option...
Cheers! -
Hello Community
Currently I have a Sharepoint 2010 Server farm.
One server contains the database and DNS server
because it is the the domain controller.
The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
Thank you
ShabeautThere is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
What wireless card works well with Arch?
Hello there
I recently finished building my quad-core (yay!) pc and because I don't want to run a long ethernet cable across the house, I was wondering if you guys knew any wireless cards I could use for my desktop (PCI/PCI-Express) that would work well with arch. I'd prefer to order it over the internet, and don't want to spend more than $100 (tax/shipping included). I know there was an earlier thread about this, but I didn't want to revive it and I also had some "requirements" in which I pick out. All help is appreciated
Last edited by itsbrad212 (2010-03-23 03:30:35)655321 wrote:
Atheros Wireless cards work great on linux, I searched some on amazon for you there are some very good picks. They have extended range also
http://www.amazon.com/s/ref=nb_sb_noss? … ci&x=0&y=0
Thanks I'll have a look at those. I have had great experiences with atheros cards on my laptop so hopefully these will act the same
Last edited by itsbrad212 (2010-03-23 04:54:58) -
Exchange 2010 install with Exchange 2013 present
Good day,
I have an Exchange 2010 SP3 instance, I then added a Exchange 2013 installation, the 2010 Exchange needs to be rebuilt due to space issues on the current host and moving the 2010 Exchange will require too much downtime.
The issues that I am running into is when installing the new instance of 2010 on the new host with the Exchange 2010 x64 SP1 ISO, I am met with the following error:
[08/22/2014 07:09:03.0912] [1] 0. ErrorRecord: The object is read-only because it was created in a version of Exchange later than Exchange 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0).
[08/22/2014 07:09:03.0912] [1] 0. ErrorRecord: Microsoft.Exchange.Data.InvalidObjectOperationException: The object is read-only because it was created in a version of Exchange later than Exchange 0.20 (15.0.0.0). Current supported version is 0.10 (14.0.100.0).
After some reading I understand that Exchange 2010 must include SP3 to co-exist with Exchange 2013, all the roles have installed without any issues except the client access role, I get the above mentioned error, thus I cant upgrade to SP3.
I came across a solution where the OAB needs to be removed and then re-created, but unfortunately this will cause too much issues as the OAB is always in use.
So I am stranded where I need 2010 SP3 to install the server, but as far as I know there is no 2010 ISO with SP3 available.
Any advice would be appreciated.
Regards,
Hendrik"So I am stranded where I need 2010 SP3 to install the server, but as far as I know there is no 2010 ISO with SP3 available."
I'm not sure I understand this? If you download Exchange 2010...
http://www.microsoft.com/en-us/download/details.aspx?id=36768
That *is* the SP3 version.
Otherwise, if you install Exchange 2013 (with no other Exchange 2010 servers present), you definitely cannot add 2010 servers after the fact.
http://forums.petri.com/showthread.php?t=64056
But if you started with 2010, then add 2013... I think you can add or replace 2010 servers provided they are at SP3.
What if you had lots of Exchange servers (a hosting company for example) and had to replace a server member of a DAG? Let's assume some mailboxes have been migrated to DAGs on E2K13 and some are still on E2K10.
Note: within a particular DAG you cannot have differents versions of Exchange but you could have some DAGs with E2K10 and others using E2K13.
It would seem that you would have to be able to install a new/replacement E2K10 server in this case? You could not replace it with a E2K13 server.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
New Lync 2010 Deployment With OWA 2010 Integration Not Working
I just installed Lync 2010 and it works fine with the Lync 2010 client.
Our Exchange Server is Exchange 2010 SP3 and I can't get the OWA integration to work.
I found various blogs with instructions, but they are all so old that I'm not sure all the prerequisite software hotfixes downloads they are pointing to install are still valid for Exchange 2010 SP3 and the Lync 2010 with all the latest updates.
For a little while I got it partially working in OWA where some of the Lync integration was showing, but it was grayed out and the contacts lists would never load. Now that I have tried several solutions, it no longer even partially works.
I think I need to clear all the integration settings from both Exchange and Lync, so I can start over with valid instructions.
What are the current instructions and current download files needed with the most up to date versions of Lync 2010 and Exchange 2010?
I also need to make sure that the syntax of the all the server and certificate names the various commands and wizards ask for are exactly correct. Some of it is confusing on whether it is the actual DNS name, Exchange certificate SAN name or something
else.TL_ERROR(TF_CONNECTION) [0]0878.0AC8::09/21/2014-19:27:55.515.000002d3 (SIPStack,SIPAdminLog::TraceConnectionRecord:SIPAdminLog.cpp(160))$$begin_record
LogType: connection
Severity: error
Text: The peer is not a configured server on this network interface
Peer-IP: 192.168.1.61:23952
Transport: TLS
Result-Code: 0xc3e93d6a SIPPROXY_E_CONNECTION_UNKNOWN_SERVER
Data: fqdn="domain.local"
$$end_record
TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.289.00004a73 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 592054086
Instance-Id: 0000005B
Direction: outgoing;source="local"
Peer: 192.168.1.101:50734
Message-Type: response
Start-Line: SIP/2.0 401 Unauthorized
From: <sip:[email protected]>;tag=2b027e1110;epid=a25bafc9cb
To: <sip:[email protected]>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
CSeq: 1 REGISTER
Call-ID: ccb79e71bef84e2084502ffbd63115ad
Date: Sun, 21 Sep 2014 19:28:36 GMT
WWW-Authenticate: NTLM realm="SIP Communications Service", targetname="Lync2010.domain.local", version=4
WWW-Authenticate: Kerberos realm="SIP Communications Service", targetname="sip/Lync2010.domain.local", version=4
WWW-Authenticate: TLS-DSK realm="SIP Communications Service", targetname="Lync2010.domain.local", version=4, sts-uri="https://Lync2010.domain.local:443/CertProv/CertProvisioningService.svc"
Via: SIP/2.0/TLS 192.168.1.101:50734;ms-received-port=50734;ms-received-cid=B00
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record
TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.304.000051a6 (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 592054086
Instance-Id: 0000005D
Direction: outgoing;source="local"
Peer: 192.168.1.101:50734
Message-Type: response
Start-Line: SIP/2.0 401 Unauthorized
From: <sip:[email protected]>;tag=2b027e1110;epid=a25bafc9cb
To: <sip:[email protected]>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
CSeq: 2 REGISTER
Call-ID: ccb79e71bef84e2084502ffbd63115ad
Date: Sun, 21 Sep 2014 19:28:36 GMT
WWW-Authenticate: TLS-DSK opaque="2068882F", gssapi-data="FgMBCWUCAABNAwFUHybk5YL8BIG6/hEQ8Ho3vB2JmvRbl5XJKZwxAM+FWCDVMQAAt9DcOnkWE+JUcGJjlZfh78cGOcAxLv/yU9+cmQAvAAAF/wEAAQALAAXqAAXnAAXkMIIF4DCCBMigAwIBAgIKYUQCVgAAAAAABjANBgkqhkiG9w0BAQsFADBHMRUwEwYKCZImiZPyLGQBGRYFbG9jYWwxFjAUBgoJkiaJk
TL_INFO(TF_PROTOCOL) [0]0878.0AC8::09/21/2014-19:28:36.367.0000785c (SIPStack,SIPAdminLog::TraceProtocolRecord:SIPAdminLog.cpp(125))$$begin_record
Trace-Correlation-Id: 2754735576
Instance-Id: 00000063
Direction: outgoing;source="local"
Peer: 192.168.1.101:50734
Message-Type: response
Start-Line: SIP/2.0 403 Location profile only available when UC enabled.
From: <sip:[email protected]>;tag=60cf26eaec;epid=a25bafc9cb
To: <sip:[email protected];gruu;opaque=app:locationprofile:get;default>;tag=54ADDA87F5DF7E9514FA2FACDF01EBC1
CSeq: 1 SERVICE
Call-ID: b01cbdd5693c4bbbb4c013d87a6a51eb
Authentication-Info: TLS-DSK qop="auth", opaque="2068882F", srand="2A6F42FF", snum="2", rspauth="aec4e7a2404bbb46a0d55c9b42d3631cc36df614", targetname="Lync2010.domain.local", realm="SIP Communications
Service", version=4
Via: SIP/2.0/TLS 192.168.1.101:50734;ms-received-port=50734;ms-received-cid=B00
ms-diagnostics: 2;reason="See response code and reason phrase";AppUri="http://www.microsoft.com/LCS/TranslationService";source="Lync2010.domain.local"
Server: RTC/4.0
Content-Length: 0
Message-Body: –
$$end_record -
Anyone with Arch on Dell Mini 9 (Inspiron 910) ?
As subj ask
thanks !Thanks buttons. Arch installation on Dell Inspiron Mini 9 completed. Here it goes
fs : ext4 worked fine but when Ieft on battery over night for Syu caused most of the config and executables to disappear. reinstalled with ext3 with 4
partitions. (root/boot/usr/home). ext3 with noatime,commit=15 option. Added 512 MB swap latter (swap in file). /var/log and /tmp in tmpfs
sound: alsa fails at times without any reason and leaving no sign even with option in modeprobe.conf. oss works fine.
for the alsa to work the google search provided the following solutions.
blacklist snd-pcsp. put the options mentioned in this thread and alias snd-card-0 snd-hda-intel in modprobe.conf
WM/DE : metacity / GNOME with slim login manager.
: Problem faced: without any DE/WM mounting swap / var / tmp directories on 16 GB SDHC card works. but with DE/GNOME GNOME fails on
gconf-sanity-check-2 exited (status 256) error message. (all xml files in .gconf are tho' with right permissions). gdm issues error something
related to missing /var/log/gdm directory and hence switched to slim. (/var/log in temfs)
Power saving: suspend works. even with 512 MB swap files hibernation is not working as expected.
Networking : conventional method (network daemon) works fine for Ethernet (r8169 driver). wireless network connection yet to be tested. (wireless connection tested and working fine)
side note: netcfg miserably fails. network connection dropped without leaving any message.
correction: The problem is not with netcfg as eth0 and eth1 are getting swaped. The
solution is to put the modules in rc.conf or creating udv rule.
Total Installation size: aprox: 3.3 GB
Others: bluetooth is yet to tested. web cam works as mentioned in this thread.
bluetooth is working fine.kernel pulls the modules but not enabled.
To enable use this aircraftmanger
Side note: for the aircraft manger to work portio needs to be installed and is in aur.
Hope this will help the Dell mini 9 users with Arch installation.
Last edited by kgas (2009-05-21 13:11:23) -
First time with Arch, minimal build: little niggles [solved]
Ok, I've been using *Buntu based Distros for a while now, this is my first time taking the plunge with Arch - chosen because it is a build in what you want distro.
I've wanted a minimal build install for a printserver project, this week I took the plunge with an old laptop.
I have it doing the printserver part, but there are some minor niggles. Let me detail what I have installed and what I want it to be able to do, before I detail these.
Arch Base install with:
CUPS
LXDE
Leafpad
Xorg Intel video drivers.
smartmontools
firefox
WPA_Supplicant,as this system is to be a wireless printserver.
What I want this system to do:
Run most of the time in shell, no DE running. (This keeps it cool and quiet, as it is in a bedroom)
Only run the DE when startx is called, and have the DE able to be shut down without restarting the server.
serve printjobs from the moment it boots and connects to the wireless.
What it currently does.
Boot up, wait for login
When login, require WPA_supplicant, dhcpcd and Cupsd to be initialised before it can serve printjobs.
If DE is required, Xorg must be started in tty1, startlxde ran in tty2, and then manually switch to tty7 for the DE.=
I have a script to call when i login which starts WPA_Supplicant, dhcpcd, and cupsd in that order.
I would really like the interface to have a staticip but i dont know how to do that without the handy graphical tools that ubuntu provides.
Please can you help, at least point me in the right direction with these niggles? I have learned a lot about what is required to get a basic DE up and running, and im sure with your help I will learn more.
Last edited by Rhiadratech (2011-05-20 23:07:52)Ok, so I've gotten Cups and wicd autostarting, set the static ip from my router because else it wasnt getting DNS etc details and left it asking for that by dhcp.
Still having issues with the DE
pedro_sland wrote:
If DE is required, Xorg must be started in tty1, startlxde ran in tty2, and then manually switch to tty7 for the DE.
I run xfce4 sometimes. I just run startxfce4 and it starts Xorg and displays the DE. I think that startx runs twm which you probably don't want so you might want to take a look at that. startx has a script it runs somewhere (I forget where but the wiki will know). When I'm done with xfce I just log out and it exits.
For me, this isnt working. startlxde on its own just goes to
[root@yomiko ~]#
in tty1, and leaves me with a blank screen when i switch to tty7
I literally must call Xorg in one tty, startlxde in another and then manually shift to tty7 to see it.
startx itself:
-bash: startx: command not found
Even Xorg isnt happy being called on its own, that too goes to a blank screen, though it does at least switch to tty7
With Xorg called in tty1, when i call startlxde in tty2 i get dbug errors from pcmanfm though these seem to be just it informing its detected the HDD partitions.
there is a grumble early on in the process, before the debug errors, saying:
Importing pynotify failed, notifications disabled.
Finally, I did add the line to .xinitrc the LXDE page in the wiki said to to allow startx to run:
exec ck-launch-session startlxde
This is the only line in this file.
Currently running as root... I'm not going to complicate matters by adding a user until im sure i got it all running as root, bad practice or not!
Edit: A friend helped me solve it.
The package xorg-xinit held the startx script that was missing. I now get LXDE when i want and only when I want.
Last edited by Rhiadratech (2011-05-20 23:09:16) -
will internet recovery work on my mid 2010 MBP with yosemite and the firmare internet recovery update designed for OS lion
Yes, it does. The point is can your computer use full Internet Recovery with the firmware update or not. If not then you have to begin with the Snow Leopard DVD that came with your computer and do an Erase and Install.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
However, if you can use full Internet Recovery:
Install Yosemite, Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. -
Get parked items moved into a cleared status with out actually posting the
Hi,
I need to find a way to get parked items moved into a cleared status with out actually posting the item for payment. I do not have a PO or goods receipt to post them to. There are some invoicese which we are not paying but we want to keep those items in the history of the vendor. I need to be able to run a parked report of open items and not have these pull into that report. I have a some parked invoices for various vendors that I need to get moved into the cleared status.
Requesting you to provide suggestion on this to proceed.
Thanks and regards,
Rj.hi,
i dont think there is any suh format.as per my knowledge u have to post park documents then only it would clear.
Regards,
Greeshma -
I want to sync my I phone user name (my current e-mail address) with my iPad, PC user name (old e-mail address.) If I delete that current address in the iPhone, won't I also be deleting it in my other devices? They are synced. I don't want to lose it. I just want to get it out of the way on my iphone so it doesn't confuse the transfer of ID names and then I want it back again.. I tried deleting the cloud account, being told the current e-mails would be spared. But all it did was pop up a prompt asking me for the password to my still current email ID. So I assume now that I have to go to mail and get rid of the e-mail account. But I'm scared I'll lose everything in my other devices too.
You can change the email address you use as your apple ID. this doesn't mean you have to delete the old email address as email.
When you delete an email from your device, it is only removed from the device, it does not delete your emails or the email account.
Maybe you are looking for
-
Problem in showing worksheet of discoverer in portal
Hi All, I have created a worksheet in an user called BI. I have logged into Portal using user orcladmin. I have registered the portal provider. I have added the portlet in the portal page. I can see the public connect in the edit page. When i click n
-
Primary index and secondary index in a select query
Hii, How to use a primary or secondary index in a select query? How does this indexes actually work? Moderator message: please search for available information/documentation. Edited by: Thomas Zloch on Jan 21, 2012 8:38 PM
-
Continuing font encoding and tag issues with snow leopard and CS4oI
I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unr
-
Workflow is not trigerred from the portal
Hi all, I have a scenario in which the workflow requires to be trigerred through the portal and direct the task to the approver's inbox in extent to sending email notification to the approver, I have developed the custom workflow and i am using the s
-
Deleting part of history in Safari
When using Safari, I find that I want to delete some items in my history (e.g. 5 items out of 10). Instead of clearing all history. How do I do this? Any help would be appreciated. Marta