ATI 5770 image corrupted on power on?

About 2 weeks working ok with my new Mac but this morning and on power on I got a very strange image on my EIZO monitor: as an old analog TV noise. Power off and on again and everything ok.
I suspect something wrong in the ATI card driver.
Someone with this problem?

I've gotten the analog like noise too, on one occasion when I woke the monitors from sleep. I turned the monitor on and off and it worked. One monitor is connected to a mini display port with a mini display port to vga connector; the other is hooked up to the dvi. I'm using a Mac Pro Quad-Core Xeon 2.8 ghz My video set up (copied from system profiler) is:
ATI Radeon HD 5770:
Chipset Model: ATI Radeon HD 5770
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x68b8
Revision ID: 0x0000
ROM Revision: 113-C0160C-155
EFI Driver Version: 01.00.436
Displays:
Dell E193FP:
Resolution: 1280 x 1024 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To VGA Adapter
Adapter Firmware Version: 1.03
DELL SP2309W:
Resolution: 2048 x 1152 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Rotation: Supported
Display Connector:
Status: No Display Connected

Similar Messages

Image Corruption in ACR/Bridge CS 6:

Shooting 1D mk lV, all image shot in RAW; Mac Pro Dual Core Xeon, ATI Radeon HD 5770. Downloads are via card reader.
Bridge/ACR will randomly take the first image I open and corrupt it. It could be per set of images or just the first image of the day. This is usually not a problem as my first images are usually just test/set up shots. This morning it screwed me royally.
I edited a shoot last night and put my highlight images into a separate folder. I then did ACR corrections and ran a batch for logo'd sample images and sent them to the client.
This morning I start up my computer and open the highlight image folder, select the 5 highlights, click on 'open in camera raw' and they pop up and after 2 seconds the first image corrupts.
I have tried copying the image to other drives as well as to my Mac Pro laptop and it does the same thing every time. Purging cache for selection doesn't work.
Copying the original in finder to another drive doesn't work (this has worked in the past).
This has happened in the past and I did find a fix of deleting a certain file in the adobe library (and it recreates it). I did save the page where I found the fix but haven't been able to find it.
I have re-created the ACR cache as well as the Bridge caches. After recreating the caches and clicking 'purge cache for selection' it briefly pops back the original and then corrupts again.
I've tried increasing cache size and various cache options.
When I view the file in finder, the tiny thumbnail shows the correct image but the preview shows corrupted image.
If I view the image in Canon's Digital Photo Professional, it pops up for a second normally and then corrupts itself.
I'm guessing it's a deep cache issue...I have well over a million images that have passed through CS6. I regulary clean my caches but am I missing something somewhere???
Any suggestions from anyone???

Doubleclicking on the files in Bridge causes that quicktime or VLC or itunes (depending on the file format) will open that, but bridge does not handle anything?!
Bridge CC and Bridge CS6 both handle my .mov files from EOS 1Dx and iPhone without any problems. The show in the preview window and can be played with sound in this same window. (MacPro with 10.8.4)
Purging cache is what it is, it dumps the previous cache of the preview and forces Bridge to create a new one, nothing else is set to default.
First try a reset of preferences and hold down option key while restarting Bridge and choose reset prefs. then try again.

What's best.. ATI 5770 or 5870 1GB Graphics Card?

I have to buy a new Mac Pro, so I'm looking at the 3.2 Quad-Core with 16GB ram. I run large image files with many layers in CS5 extended and will be moving up to CS6 extended. All of my image management is through LR4 as well as several plug-ins. So is the ATI 5870 1GB card worth the extra $150 upgrade price over the ATI 5770. I'd prefer to wait for the new Mac Pro models coming in 2013 but I do have to make a living. I've been using the ATI 5770/1GB with no issues on a 2.66 MacPro running Mountain Lion. I'm running dual NEC 27" PA271w displays.

The upgrade price I see in the Apple Store is $200 for the 5870.
Personally, I'd skip the 5870 GPU upgrade (which I understand runs loud and hot and is a power hog) and grab the 6 core upgrade for $500 instead. The RAM for the quad core 3.2GHz runs at 1066MHz and the 6 core 3.33GHz RAM runs at 1333MHz.
So for a $300 difference (vs quad core with 5870) you pick up 50% more processing power across the board.
Check out www.barefeats.com for speed comparisons like this one http://www.barefeats.com/pscs6.html
PSCS6 features the Mercury Graphics Engine (MGE) which takes great advantage of GPU, but only certain filters are accelerated: http://forums.adobe.com/message/4289204#4289204
For my money a MacPro that's faster on all fronts is the better deal. You can swap out the GPU later, but the CPU is definitely best ordered up-front. I have the 2010 6 core 3.33 Westmere and combined with an SSD runing just the OS and APPs, it really sings. Plus the price has come down quite a lot on the 6-core option with the 2012 models (used to cost additional $1200 I think).
Here's Digilloyd's take on MacPro configuration http://macperformanceguide.com/Mac-HowToConfigureAMacPro.html NOTE that he suggests 24-48GB of RAM for intensive Photoshop work.
Here's another BareFeats test (from Sept 2010, but then these are old GPUs) http://www.barefeats.com/wst10g7.html
and you'll see that while the 5870 beats the 5770 for some things (but ties on many), the 6-core 3.33GHz Westmere beats everything else on the list -- and is roughly twice the overall speed of your 2.66GHz quad-core from 2006 even with a 5770.
Hope that helps!

2012 Mac Pro / Mountain Lion won't boot with ATI 5770

2012 12 Core mac pro. I've got 2 GPUs installed:
- Quadro 4000 for mac
- ATI 5770
The Quadro is so loud and annoying that I'd like to unplug it for general use. Then plug it in for DaVinci or Premiere use.
Problem is when I unplug (power) from the Quadro and reboot, system gives me the Apple logo and then automatically restarts. Over and over. This is with Mountain Lion.
I tried booting to a drive with 10.6 and it booted up fine.
I keep searching for driver updates or something but everywhere says it's included in OSX?
Is this problem happening because there are 2 GPUs installed? Even though one is unplugged? Like PCI lane conflict or something?
Alex

I think you will need to remove it entirely, or plug the power back in. It does not seem to allow your Mac to work with a Bus connection, but no aux power.

I have a Mac Pro 1.1 (2006).....Can I upgrade to ATI 5770 for MAC?

I have a 2006 MAC Pro intel......Need to upgrade my Graphics card to acess all of the effects in my Final Cut Pro 4 Studio. Hoping I can go with an ATI 5770 since it will also work with FCPX "IF" I ever decide to upgrade to LION and FCPX. I have had mixed findings and can't seem to get a straight answer from APPLE. Do I need the 5770 for MAC or do I need the (Upgrade fro MAC) kit? I have 10.6.4 (snow leopard as an OS and don't want to upgrade to Lion yet because I don't want to use FCPX.

you won't get straight answer and yet there are dozens in the comments section of the product page for 5770 from MacPro1,1 owners running 10.6.5+.
Not sure what you mean by "upgrade kit" vs "5770 for Mac" but you want Apple card and possibly power connector.
http://store.apple.com/us/product/MC742ZM/A

Aperture + ATI 5770 upgrade

Will I see a significant improvement in Aperture 3.1 by upgrading the graphics card in my 2008 MacPro to the ATI 5770 from the currently installed ATI 2600?
More specifically, when working with RAW images using adjustment brushes and presets.
Thanks.

Or the 5870 though those aren't shipping until late December now.
There are half a dozen articles on Barefeats I put in one reply:
http://discussions.apple.com/messageview.jspa?messageID=12370032&stqc=true
I'd do it regardless just to get off the 2600.
Where is Aperture now?
What are you using for system boot drive?
Those two can also help make a difference.
Would a Quadro 4000 make a difference with its 2GB VRAM?

Flash ATI 5770 for Mac3,1

I have a late 2008 MacPro with a GeForce 3300.
I picked up a XFXForce ATI 5770
I doesn't include the EFI in the ROM and in the System Profiler in 10.8, it shows as an ATI 5700.
Does anyone have a ROM that they've flashed so this adapter supports EFI mode and makes it use the 57xx series driver?

Jeeves_TX wrote:
2. My main boot is 10.6.9...
Is this a typo (you really mean 10.6.8) or do you have the oft-rumored, yet secretly-held iCloud upgrade of Snow Leopard?
Jeeves_TX wrote:
I use Eudora, which needs Rosetta, hence 10.6...
Eudora running in Snow Leopard Server installed into Parallels for use in Lion or Mt. Lion:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439

Question about configuration (ATI 5770) w/ 3 monitors

Ok I already know how to get three monitors running on the ATI 5770. I have one native mini DisplayPort, one mini DisplyPort to VGA and one native DVI or DVI to HDMI. What I need to know (before I buy another native mini DisplayPort monitor) is if the 5770 can run two native mini displayPort monitors and a native DVI? Has anyone done this?

i am currently running 3 displays on my macpro 1,1 with a 5770 card. here is my setup
mini display port to dvi (dual link active from monoprice) to an Acer 24" monitor
mini display port to dvi (sme as about) to and dvi to hdmi adapter to 65" 1080i television
dvi port to Acer 24" monitor.
i have to set it up this way because if i set both monitors to mini display port adapters and the tv to the dvi to hdmi adapter one of the monitors will not come on. setting it this way all three monitors are working. the only problem that i have is that my tv monitor flickers like the computer is refinding it all the time. i haven't really had a chance to look into it too much, but i can tell you that without the active link adapters only two of the three connections will work at one time.
hope this helps

Will ATI 5770 help me display HD video without stuttering?

I have a 1,1 Mac Pro with the stock GeForce 7300 card which powers an Apple Cinema HD display via an ADC adapter and a no-name 1280x1024 DVI monitor. Works well but my system struggles with 1080p video. I edit with Final Cut Express and frequently the video will stutter when I play it within FCE or Quicktime.
Running latest OS and the system has 5GB ram and a couple of 7200rpm discs for storing video footage.
If I upgrade to the ATI 5770 will that display HD video more smoothly, or is it the speed of the CPU in my Mac Pro which is holding me back?
Grateful for any advice you can offer.

I'd try at minimum 10 to 14 gigs of ram.

ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
from: http://en.wikipedia.org/wiki/HDMI
You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

VJO in not defined & image corrupt or truncated,only in FF & also safe mode but ok in private browsing

VJO not defined & image corrupt or truncated
I am getting this error when the computer renders some websites. It happens with ebay & on youtube. It shows the text but no pictures or background. I am running Windows 7 Home Premium 64bit and Firefox 4.0.1 it also happens in the newest version of FF & in safe mode , I have installed the latest Java runtime with no change ,but interstingly if I turn on "in private browsing" FF runs OK.
I have run Firefox in safe mode, I have uninstalled completely using the APPS own uninstaller & then cleaned up all the files left behind with a 3rd party uninstaller I have updated Firefox to the newest release & rolled back to v4.0.1,I have disabled all addons & AV & malware apps (just for a minute)I have even tried a system restore. Also the "VJO not defined" only happens with FireFox & not with IE.interestingly FireFox runs fine if I enable "in private browsing"

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Why do I keep receiving the error message: disk failed image corrupt

I am trying to upgrade my version of Firefox from 2.0.0.2 (downloaded Nov. 2007) to the new version 3.6.12. on my IMac desktop computer.
When I download the file I receive a white and grey icon that says Firefox 3.6.12.dmg. When I click on this icon I receive the error message:
mounting disk failed; image corrupt.

Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
*http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
See:
* http://kb.mozillazine.org/Installing_Firefox
* http://kb.mozillazine.org/Unsupported_operating_systems
Mac: https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
If you have Mac OS X 10.4 or newer then do this:
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.
Other things that need attention.<br>
Your above posted system details show two old Flash 9 plugins that you should remove and update to the latest Flash 9 version.
text
# Shockwave Flash 9.0 r47
# Shockwave Flash 9.0 r16
Flash Player 9: http://www.adobe.com/go/kb406791 (Flash Player 9 for Unsupported Operating Systems)

E4500 firmware corrupt after power outage

Latest firmware with CCC corrupted after power outage. I reseet the e4500 several times and tried to reload the firmware and still no good. Only way I got it back up is to install the older non-CCC version 2.37. Strange all was fine until the power outage. Not sure if I should even bother to upgrade to 2.38 again.

Yes, power outages may caused some damage either on the hardware or software of the any device especially if there's some activity going on inside the device the time of the interruption. If everything is fine with the old version then there's really no need to update it but if you've noticed some issues, better upgrade to the newer version so to fix any problems.

Two ATI 5770 or one 5870 ?

Hello All,
I am using MacPro Early 09 model with default GT120 Display card and connected with two 1920x1200 displays, graphics not smooth at all, lag even in Finder effects such as changing spaces and expose.
Recently, I would like to upgrade to TWO Apple 27" display, But I can't make the decision on display card, Two ATI 5770 better or just One 5870 is better ? Can anyone give me some opinion ?
(Two 5870 is not affordable for me).
Thanks.

Why do you think you need the 5870 to begin with? just to drive two displays? they have the same amount of RAM.
Did you look up any articles, reviews, benchmarks?
http://discussions.apple.com/messageview.jspa?messageID=12370032&stqc=true

HT4623 I selected the latest update to OS 7 and it seems to have stuck. I have an image of the power supply with an arrow pointing to iTunes on my screen. I do not know how to move from that point. Never have seen it before. Anyone help?

I am trying to upgrade to lastest release. It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen. I have never seen this and want to reboot or restart or something. Anyone help?

I have this very same problem, have you gotten any thing to help? I hit update on the iPad and then it froze...rebooted and got the screen you described.
"I am trying to upgrade to lastest release. It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen. I have never seen this and want to reboot or restart or something. Anyone help?"
Message was edited by: rfdeaton

ATI 5770 image corrupted on power on?

Similar Messages

Maybe you are looking for