ATI_9200SE_PCI graphics card on MSI-5182

Hi,
I'm having a bit of trouble upgrading to an ATI Radeon 9200SE PCI graphics card on my MSI-5182 board; I've already had the ATI card replaced after thinking it was faulty, but I've tested the new one on another (older) motherboard and it works fine.
When I install it in the MSI-5182 all I get is a blank screen when I power on, the BIOS doesn't even recognise the card. The system won't even boot up when the ATI card is present in the system. I assume this is a problem with settings in the BIOS, so I've tried a lot of different settings, mainly making sure that the default graphics setting is set to PCI and not AGP. I've also tried disabling the on-board AGP chip in the BIOS, but this doesn't help anything, it just means I have to clear the CMOS battery to get back to default settings in order to even see the BIOS menu on my monitor.
I've tried the ATI card in each of the 3 PCI slots, and removed all my other PCI devices.
Just wondering if anyone else has had a similar problem installing PCI graphics to this board, as it seems the only option with no AGP slot to upgrade. I'm sure it is just a case of getting the right BIOS settings... Any ideas?
Thanks in advance,
Olly

+3.3V 0.2-10.0A; +5V 10.00-18.00A; 12V 4.2A
try with some thing stronger

Similar Messages

  • Supported Graphic card for MSI K9VGM-V, AMD 64 Athlon X2

    Hi Guys, I'm about to buy Graphic card for MSI K9VGM-V 64 Athlon X2. May you, please, let me know Which Graphic Cards are supported by my system. If it's possible i want to know all the price range Cheap from highly cost.

    Thanks Buddie. Good work Keep up

  • PCI-E 2.1 X16 Graphics card on MSI K9A2VM-FD motherboard

    Hi,
    I recently bought an AMD Radeon 6870 graphics card to upgrade my aging machine. The card is a PCI-E 2.1 X16 card and unfortunately does not work with my current motherboard.
    I was recently looking at the MSI K9A2VM-FD motherboard as a possible replacement that would work with my new graphics card. In the specs the board is said to have 1 PCI-E 2.0 X16 slot. I just wanted to check if this board will work with the card or not?
    Any help on this front would be much appreciated. I am a uni student with limited funds from a part time job and, as a result, I can't afford to spend money just to find it doesn't work again.
    Thanks in advance for your help   

    Thanks for your reply Whilst I acknowledge I don't have that much time for gaming, once in a while isn't going to hurt and I do need to relax sometimes 
    I've already bought the HD6870, so choice of card isn't the issue. I have a 700w PSU which I have tested using a friend's old board with the new HD6870 card and it worked fine, so I definitely know that the PSU is fine and that the card works. I have a foxconn A7VMX-K at the moment and updated to the latest bios to see if that sorted the issue. However this didn't work.
    I am now in the market for a new board and was looking at the MSI K9A2VM-FD board. It says it has a PCI-E 2.0 X16 slot on the specs of the seller's site and on most other sites. On some it just says that it is version 2.0 compliant, which is a bit confusing. I just wondered if anyone could tell me whether the HD6870 (PCI-E 2.1 X16) would work on this board (PCI-E 2.0 X16)? Many thanks

  • Cannot update graphics card BIOS, MSI Live upate 6 will not work.

    Live update 6 does not support "MSI Radeon R9 280x Gaming 6G" graphics card.
    Live update 6 does not run.
    Even tried mass loading Live update 6 to the point it had 800+ "Live Update.exe 32*" processors running in task manager and they soon disappeared 20 seconds later.
    No UI.
    No Error message.
    If the program is not running it is clear it does not support any of the hardware in my system including "MSI Radeon R9 280x Gaming 6G".
    As a result I cannot update to latest BIOS for my graphics card.
    Operating system: Windows 7 64bit (last update 05/09/2014 6 days ago)
    CPU: AMD A8-6600k APU @ 4.60GHz
    RAM: 8GB Dual channel Crucial Ballistix Tactical Tracer DDR3 1866MHz CL9
    Motherboard: Asrock FM2A88M Extreme4+
    GPU: MSI Radeon R9 280x Gaming 6G
    GPU details:
    Am I required to have an MSI motherboard to be eligible for a graphics card BIOS update?
    The reason why I seek this is because the entire line of R9 200 series graphics cards are plagued with screen flickering due to ULPS. BIOS updates for other vendors of the card; "Gigabyte", "Asus" etc have been reported to fix the monitor flicking ULPS causes however since I have an MSI GFX card I cannot use Gigabyte and Asus BIOS updates.
    I no longer have the flickering issue due disabling ULPS and overclocking the graphics card however it's causing the card to operate at a constant 48 degrees and chew power.
    With the overclock values and stress testing it with Unigine Heaven Benchmark 4.0 (extreme preset) the card reaches a max of 74 degrees over the course of stress testing for 4 hours.
    But I would like to be able to have my card at factory clock settings with ULPS without the flickering and I'm wanting to see if the staff at MSI are fully aware of the bug in their product line and if the latest BIOS version for the graphics card would fix the issue.

    No but live update is flakey at best and i wouldn't trust it.... (seen far to many problems with it)
    if you want a Updated VBIOS if one is available please supply these 2 things and then one of the other mods will be able to get you what is needed!
    1: Serial number of your card (leave off the last 3 digits and then there is no unique information about your card as the rest is all just manufacture data to all the cards from that batch)
    2: click the little icon to the side of your BIOS version number and save a copy of the VBIOS to a file and uplaod it to somewhere and give us a link to the file... (use somewhere like Dropbox)
    once we have those 2 pieces of information someone here will be able to get one if Available for your card

  • Radeon 9200 graphic card on MSI KT6V-LSR mainboard crashing

    My problem is as follows: I'm running my KT600 mainboard (MSI KT6V-LSR) with a Radeon 7000 graphic card without any problems at all. However, when trying to upgrade to Radeon 9200, the machine crashes right after login in Windows XP and I actually have to remove the mainboard battery to be able to start it again. I'm using the latest Catalyst drivers (5.11). It works fine in safe mode and in vga mode. Any obvious solution on this anyone?

    Quote from: Dr Stu on 14-November-05, 04:30:20
    sounds a bit extreme. does your system have a reset button?
    No, just a power button. However, no response on it after a crash like this.
    Quote from: Dr Stu on 14-November-05, 04:30:20
    have you tried uninstalling the Catalyst drivers in Safe Mode and then rebooting, then reinstall drivers once windows has loaded?
    I have uninstalling/installing the drivers a couple of times yes.
    Quote from: Dr Stu on 14-November-05, 04:30:20
    lastly, Is your problem caused by your PSU? please provide your PSU specs in case that is the cause of your woes...
    My PSU is a 350Watt powersupply. The case actually prevent me to see the brand of it, so this is all I know. BTW, the Radeon 9200 card is running perfectly fine on another mainboard I have (asus), so I guess the graphic card is fine.

  • GRAPHICS CARD FOR MSI 480 RS

    MSI 480RS, 512MB RAM, AMD 64BIT ATHLON 3000+. WHICH GRAPHICS CARD IS SUITABLE FOR MY MOTHERBOARD FOR GAME LIKE CRYSIS & NFS SHIFT. PLEASE SUGGEST.....

    Quote from: Bas on 26-December-09, 22:00:27
    Sake start your own topic, don't hijack other peoples topics.
    Read again Bas. I'm answering the topic posters' question. Someone misread my answer and I replied to that.
    I have no issue so no reason to open a new topic 

  • Graphics card fit msi h61mu-e35 mainboard

    Hey i have a problem. my graphics card has overheated cause of lots of dust and stuff in my pc. now i need another one and ive found 2 but i dont know if my pc supports it. and what it support. my mainboard is a msi h61mu-e35 (b3) . and the graphics cards ive found is (MSI N560GTX-Ti Twin Frozr II) and a (Radeon HD 4890 AMD) . does any of these work ? and if not what graphics card should i buy ? please i need help pretty fast, cant live without my pc :s
    Robnobba

     I would go with the 560 also, I have a 560 Hawk in my rig. 
    What brand and model PSU do you have?
     I don't know why this topic is in Red Rockets f@h section though.

  • Looking to upgrade graphics card for MSI MS-6577 v 2.1

    Hi Guys,
    I own a HP Pavilion a219.uk desktop PC which I believe has a MSI MS-6577 v 2.1 motherboard.  I am ordering some parts for a new PC, and am also looking to update this machine with a new graphics card from the same site, but am getting lost with the differences between AGP 4X and 8X, as I believe this motherboard only has support for 4X.  Can anyone suggest to me a working card (preferably in stock, as I am leaving this PC behind when I go to uni, and am trying to upgrade quickly!)?
    http://www.microdirect.co.uk/productlister.aspx?n=2,12,57&n=701
    Thanks

    Hello,
    You should contact to your mainboard OEM builder.{HP for your case}
    This forum support MSI retails products only, for more information read here:
     >>OEM boards manufactured by MSI<<
    P.S: Topic locked since board is not retail MSI model

  • MSI graphics cards and MSI motherboards

    Do MSI "tend" to match their graphics cards with their motherboards? .... would I benefit from matching an MSI graphics card with my K8T Neo2 motherboard?
    JLP

    Noooooooo, not at all.
    I have some K8N neo2 platinum combined with an msi nx6800gt and although
    i'm very happy with game performance, there are times i would expect more.
    My GT has lots of problems when not running at stock.
    Even at 365/1050 there is some stuttering (rarely, and for about 2 seconds) but
    still, there is.
    It could as well have been any other brand.
    And i bet it could have been a better o/cer.
    The only thing i HIGHLY recommend msi gards, is their EXCELLENT bundle.
    Mine came with 15 cds(!!!) :  DOOM 3, XIII, URU, Prince of Persia and many more.

  • Looking for recommendation on graphics card for MSI H67MA-E45 board

    This board doesnt have an adjacent psi-e slot, so any card that requires that is out right ?
    So the HD 5770 is out ?
    Any suggestions ,looking for something at least as good as a GTS 250.But not looking to break my budget either.Would like ,but dont need dx 11support
    Thanks for any help .

    Some of these cards list as- Required Peripheral / Interface Device- CD-ROM, adjacent PCI slot...
    So all that means is it needs the space an extra slot would take up ,not the actual slot ?Thats seems a very confusing way to say that.

  • Checking graphic card compatibility

    I am trying to get a new graphic card for my pc but I'm not sure if the it compatible with my pc. The psu of my desktop is 300W and the graphic card is am planning to buy has a requirement of 300W with (Minimum recommended power supply with +12 Volt current rating of 16 Amps.) There is nothing on the spec page on this site that says anything about my pc's volts or amps. So how do I find out about my desktops volt current rating and whether it would still be compatible.

    Hi,
    Try one of the below MSI graphics cards.
     MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF If NewEgg is out of stock then try Tirger Direct, Amazon or Google.
    Know what the return policy is before you buy.
    These HP How-to articles should be helpful.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Compatible Graphics Card (Pavilion 500-250ea).

    Quick question:
    I wish to connect my Pavilion  500-250ea to the HDMI connection on the monitor. Could somebody give me a list of low-cost compatible graphics card? I only want it so I can connect up via HDMI. No gaming or intensive graphics rendering.
    Thanks!
    Chris.

    Hi,
    Review this posted document.
    Try one of the below graphics cards.
    MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF
    HP Secure Boot Windows 8 Topics   Computer Does not Start After Installing a Video Card (Windows 8)
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • The Crew –Racing with Your Coolest MSI Gaming Motherboard and Graphics Card

    Most gaming fans are crazy about racing games, and there is a new game title just launched to fulfill gamers’ dream. We want to share with you the experience from Taiwan user who assembles a rig with a brand new MSI Z97 Gaming 5 motherboard and 960 graphics card, along with a hardware and game (The Crew) benchmarks. You may find the original article from:
    https://forum-tc.msi.com/index.php?topic=113352.0
    The Crew - Launch Trailer
    PC configuration:
    CPU: Intel i5-4670K
    RAM: Avexir DDR3-1600 8G*2
    VGA: MSI GTX960 GAMING 2G
    SSD: Kingston HyberX 3K SSD 240G
    CPU Cooler: SilverStone AR01
    The MSI Z97 Gaming 5 motherboard box
    Overview of the motherboard: Black and Red color scheme, it’s also the favorite color combination from MSI’s user reservation.
    The PCI-E slots and bandwidth are enough for a two-way SLI setting.
    Killer Ethernet, outstanding performance on internet access, especially reduce the lag issue.
    The new arrival MSI GTX960 GAMING 2G graphics card
    New cooling design: ZeroFrozr
    The dragon symbol on LED panel
    With MSI Gaming series motherboard plus graphics card, you can enable a Gaming App to overclock CPU and GPU. There are 3 modes to choose.
    6-month free trail of the XSplit game caster software, free bundled with MSI gaming motherboard and graphics card
    Done with assembling, quiet nice color combination and clean cable arrangement.
    An overview of the very gaming look system.
    Some benchmark results before racing with The Crew.
    CPU and GPU info on CPU-Z and GPU-Z applications:
    3DMark Fire Strike score: 6441
    3DMark Fire Strike Extreme score: 3384
    3DMark Fire Strike Ultra score:1262
    The excel performance proof the brand new 960 graphics card comes with good a high Cost/Performance Value.
    Now, check out this test benchmark score of the renowned game “The Crew”.
    The game presents an ultra-quality display, 60 Frames Per Second (FPS)
    FPS: Average frames is at:
    Frames: 3859 - Time: 76828ms - Avg: 50.229 - Min: 43 - Max: 56
    The comments of the game for your reference:
    There are many types of missions that can be chosen from the America’s map.
    Street racing, high-speed collision, breakaway from police, sky jumps, zigzagging, etc… make the game quite dynamic.
    Now, when it comes to multi-player matches, the performance has exceeded expectations. Perhaps, it is the killer Ethernet that’s working the magic. Thus, this game is highly recommended if you have the right rig.
    The downside is that the display intricacy is not as refined as GTA V and in addition, the game FPS is limited at 60 FPS. However, the overall gaming flow and performance is better than good.
    The user's comment for using MSI Gaming 5 motherboard and 960 graphics card:
    (The following commends are translated from user’s article, does not represent the viewpoint of MSI) ^^
    Recently, MSI GTX 960 just launched so the initial price tag is still adjustable.
    According to the current product line, it seems like this GPU is going to replace 750Ti. So once all the stocks (750Ti) at the store empties, we are most likely to see a price drop on GTX960.
    Once the price hits the sweet spot, it’s time to try out GTX960 SLI’s performance.
    The CP value on MSI GTX960 and GAMING 5 MB is pretty high. But the XSplit software that comes with the product is a bit annoying since the authentication steps are divided into 2 parts to go through for using it.     
    Enough said, anyways, GAME ON!

    NVIDIA 960 card  + GAMING 5 motherboard = best bundle for budget gaming!
    it would be nice to see more testing of hardware-demanding games!

  • MSI X48C Platinum - Graphic card identification problem

    Hi,
    I have been having this problem for a long time which I still haven't been able to solve.
    When I plug my graphics card to the PCI-E slot 1 (Slot closest to the cpu) I get nothing on my monitor. I have to plug it on to the  PCI-E slot 2 (PCI-E 4) to get anything on the monitor. I am running Windows 7 (64bit) Professional.
    With this configuration (That is, the graphics card being installed in slot PCI-E4) I am getting a lot of blue screen failures due to  graphics card being non-responsive, especially when running graphic intensive programmes.
    Here are the details of my PC configuration.
    Motherboard - MSI X48C Platinum (MSI MS 7353)
    RAM  - 6GB DDR3
    Processor - Intel Core 2 Quad Q9300  -  2500Mz
    BOIS - Version 7.4V
    Graphics card - Hightech Radeon HD4870  1GB DDR5
    Any help would be appreciated.
    Thanks.
    Cris

    Hi go_for,
    Thanks for the reply.
    I am using a Aerocool 750W  (model VP-750)power suppy and the graphics card is connected with 2 PCI-E power connectors from the power supply.
    The problem is that it runs on the other pci-e slot not the first one. Could the first slot be defective?
    Thanks
    Cris

  • Problem with MSI GTX 960 GAMAING 4G graphics card - Please help

    So I just bought an MSI GTX 960 GAMING 4G graphics card. My problem is that it seems to randomly decide when it wants to run fine at 1215 MHz, and when it wants to downclock to around 135 MHz. Today for example, I was playing Witcher 3: Game was running fine (~55 FPS) for a few hours because the card was performing at maximum. Then, out of nowehere, I dropped to about 4 FPS. I checked Afterburner, and the core clock went down to 135 MHz, while I was still in game. The card is not overheating during gaming. I have the fans set to 35% speed at all times and the GPU never got hotter than about 50c.
    I have the latest nVidia drivers installed. I even tried an earlier set of nVidia drivers and the same things happened. Also yes, it is firmly seated in the PCI-E slot and yes, the power cable is firmly plugged in.
    PC Specs:
    Intel Core i5 Devils Canyon
    Gigabyte GA-Z97N-WIFI mobo
    GSkill Sniper 16GB RAM
    MSI GTX 960 GAMING 4G graphics card
    Antec EDGE 550w PSU
    I understand these newer graphics cards have power saving settings built in, but I have my nVidia control panel settings to "Prefer maximum performance" and it doesn't seem to help. It seems my card is putting itself into power saver mode at will. I suppose my PSU could be the culprit even though the recommended PSU is only 400w, and I have 550w. Any ideas?

    So it turns out I wasn't running the latest BIOS for my motherboard. I updated my BIOS and cleared CMOS. Everything was running fine for a couple hours. I was playing Witcher 3 at full clock and memory speed. GPU temp was hovering around 62 deg c at 60 FPS. Then after a couple hours, the game crashed. Rebooted my computer, and now I am back to the same issue where the card won't run at full speed in a 3D application. Even ran the Valley benchmark tool again and the card didn't increase speed to compensate.
    Do I have a defective card? If so I will get it replaced from Newegg.
    Also I don't know if I am running the latest vbios. GPU-Z says I have 84.06.14.00.F3
    If there is a newer vbios, I can try to update and see if that does anything. I will try anything before returning this to Newegg. My old video card bit the dust and artifacts everywhere, so I don't have a temp replacement.

Maybe you are looking for

  • Interfaces in ABAP Objects

    some body please tell why this code snippet is giving a syntax error syntax error:interface component "INTERF~A" doesnot exist interface interf. data a type i. aliases a1 for interf~a. endinterface. class abc definition.   public section.   interface

  • IDOC to File : "no interface found"

    Hi all, I have an IDOC to file scenario and I'm getting the error "no interface found" at sxmb_moni. The scenario is only for test purposes, very simple, using the IDOC /ISDFPS/T01./ISDFPS/T0101. I have configured -> receiver and interface determinat

  • Need to protect my notes on my iPhone

    How do I protect my notes on my iphone when I update? I'd love to put them on my laptop & then onto a flashdrive, but I don't know how. I want to go ahead & restore my phone now that it's backed up, but not sure if my notes are protected too like my

  • How do you autosize column widths in a multicolumn listbox?

    I know that it's possible to autosize row height, but I can't find anything relating to autosizing column widths in a multicolumn listbox. This makes what I'm doing difficult, because I want to be able to have dynamic content and won't know beforehan

  • Unit of measures for Swiss Export

    Hello there, were currently working on the implemntation of swiss export. Now were facing an issue with the external UOM´s the swiss authorities is requesting. We have to report f.e. 17     Stück (Tiere)      / Piece/Head (Animals) 18     Stück (Uhre