Ati 9700 Windows Vista Driver Problem on a P10-792

I tried Windows Vista beta 5308 in my Toshiba P10-792 and i was unable to get graphics accelartion with Windows Vista graphics Driver for Ati 9700 , which is is built in P10-792.
It reports error code 43.
After some research i found http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=268378&SiteID=1
Some people suggested to get the latest bios update for the laptop. I updated to the latest bios, but the problem still persists, is anyone experiencing the same problem ?
Any help would be valuable.
Thanks

Hi
Usually you should use the Toshiba graphic drivers on the Toshiba notebooks.
I have found the description of the Error 34 on this Microsoft site:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310123#XSLTH3439121122120121120120
Error-Code 34: Windows cannot determine the settings for this device
Solution:: The device requires manual configuration
Well, the fact is that the Windows Vista is not official on the market and there are many test needed. Furthermore Toshiba doesnt proffer the graphic driver for Windows Vista at this time. In my opinion you have to wait for Toshiba graphic driver. Im sure that original Toshiba graphic drivers will work in the future.

Similar Messages

C6 Bluetooth to Windows Vista driver problems

While trying to connect my C6 to PC for the first time, Windows Vista starts asking for a driver for a Bluetooth Peripheral Device.
Windows recognizes 4 such devices in total that need a driver. As no installation CD is provided with the C6 phone and an online search yields no results, the installation can't be finalized and altough there is a Bluetooth connection established, no drivers means no services available that can use it.
Where can I find the drivers I need?
Solved!
Go to Solution.

After a long nigth of tinkering with, I got Bluetooth working.
I first changed the standard microsoft bluetooth stack for Broadcom, but connecting to the C6 failed again. I then installed Bluesoleil. That got the bluetooth connection between PC en C6 working, but only from within the Bluesoleil software. I then removed Bluesoleil and when I tried to reconnect my C6 over Bluetooth, installation went without a hitch.
@jakke: Connecting from within Ovi Suite failed too.

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link ---

HP LaserjetPro M277dw printer and windows vista driver installation issues

I ust got the hot off the press HP Color LaserJet Pro MFP M277 which seems to be a miraculous machine. Just one problem. When trying to download and install the printer driver it goes through the whole process and then tells you the driver will not work with this operating system.
Hmmm. It says on the HP website that this is the correct software for this machine. I have been through at least 10 HP support people up to Level 3 support and hours of online work with HP people trying to install the software. The word I get back is that it will not work with my machine. So I am wondering if I have a Windows Vista 64 bit machine, and the software says it is for that machine, but it wont load, what machine will it work with? The last person I worked with just told me I will need to get a new computer. I thought I just bought a printer that would work with my computer, and now I am told i have to buy a new one?
Any ideas on how to get the software to load? I have some functionality, such as wireless network printing that one technician was able to get to work, but no scanning. Another technician changed all the permissions for installing various programming segments to "everyone" but that didnt work either. He had it so messed up that the it would not print anymore wirelessly either. I had to restore to an earlier date after that guy got off my computer so i could at least get some functionality back.
So, without the driver, I cannot scan to this computer, and i really dont know what other good things i am missing out on because I have never experienced the correct configuration......please help if you can. I need to send the machine back within a certain time period, and I really do think it is the solution for my business, if I could get it to work......Thanks!
PS Direct connection to computer and downloading software that way does't work either.....cannot use the printer directly connected.....

Hi,
Is it the following one ? If not, please download then try again:
http://ftp.hp.com/pub/softlib/software13/COL60646/kj-145845-1/HP_LaserJet_M277_PCL6_Legacy_Print_Dri...
By the way, what is the model of your Lasejet M277 printer ? Must be M277 something.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Envy 5640 - Windows Vista Driver Installation Error - Please Help

Hi
Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
The printer is up and running and working perfectly on our iOS and OSX Mac devices.
The PC can see and communicate with the Printer.
But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
<<
Install Failed
The software required for your printer could not be installed.
For more information click the Details button below.
DETAILS...
The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
>>
Then when DETAILS... button pressed:
<<
Installation Error
Key not valid for use is specified state.
>>
I haven't entered a key, nor a state? I'm in the UK.
Any ideas?
Thanks in advance
Dave

Hello there! Welcome to the forums @Stodgy70
I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
Here is the direct link for you to download and install the printer on Windows Vista:
HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
Please let me know the results, have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows Vista Driver for Sound Blaster 5.1 P

I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

Lexmark x5495 and windows 7 - driver problem

Hi, I have windows 7 and just got a printer - lexmark x5495
unfortunately Windows cant find the right driver 4 the printer via windows update...
I have downloaded driver for win 7 32, 64 bit, windows vista even windows xp and non of them is good!!! :(
I was looking all over google for somebody to solve that problem and nothing!
on the lexmark and windows websites it says printer is compatible but must be something wrong with driver
btw it works 100% under win xp and it is not any printer spool problem...
can somebody help me, please

Hi, I have windows 7 and just got a printer - lexmark x5495
unfortunately Windows cant find the right driver 4 the printer via windows update...
I have downloaded driver for win 7 32, 64 bit, windows vista even windows xp and non of them is good!!! :(
I was looking all over google for somebody to solve that problem and nothing!
on the lexmark and windows websites it says printer is compatible but must be something wrong with driver
btw it works 100% under win xp and it is not any printer spool problem...
can somebody help me, please
Could you be more specific when you mention none of the drivers is good? Is there any exclamation mark in device manager for the printer? And what makes you think the problem lies with the drivers and not the printer itself or the way you setup the drivers?
Suggest you to uninstall the printer drivers from device manager, next reboot your pc and ensure the printer is power on and plug in, next let windows 7 detect and assign drivers by itself instead of using the drivers downloaded.
If still no go after the above, run the drivers in xp or vista compatble mode under windows 7

Win7 and ATI hd 3400 series driver problem

Hi guys
i have installed win7 on my T400. generally there is not driver problem. but in device manager window there is a '!' on ATI mobility Radeon hd 3400 Series. i have downloaded ATI Display Driver for Windows 7 32bit and 64bit from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#m8xdiscrete but there is not any change.
1-is it a serious problem?
2-how can i solve this problem?
best regards
Solved!
Go to Solution.

Since your system shows two display adapters, you do have switchable graphics. Deinstall the ATI driver and install the Switchable Graphics driver. This package contains drivers for both cards and allows them to cooperate.
Lenovo Premium Business Partner
X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

Windows Vista sound problems on Qosmio F30

Hi
Ive recently installed windows vista on my Qosimio F30 and i have sound problems. Effects sound ok but speaking is really quite and distort. I have tried instaling a new driver for it but it gets to the end and says driver not installed properly.
Please help!

Hello
What type of windows you installed? (Basic, home premium, business or ultimate)?
make sure that you downloaded and installed this driver for f30:
http://support.toshiba-tro.de/tools/qosmio/g30/vista/sound-vista-61053240.zip

HP 15-f039wm Windows 7 Driver Problems REOPEN PLEASE

http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-15-f039wm-Windows-7-Driver-P...
Im experiencing the same issue. A very nice person posted links to drivers to help solve the issue, but the 2nd link for the graphics card is no longer valid. Does anyon know were i can find the driver thats listed in the previous link?
Why does it affect my HP15 after downgrading to windows 7.. and is there a support page on HP.com where i can find these drivers just in case i need to format my computer again in the future?

Try the Intel driver update utility.
http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
Try the following HD graphics driver
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24391&lang=eng&ProdId=3590
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows Vista Authorization Problem

I have a problem with Authorization - I recently upgraded my OS to Windows Vista, and when I next went into iTunes it said I needed to authorize my PC which I duly did. Even after successfully authorizing, it won't play my songs. When I try it just asks me to authorize again, which I do - it then tells me I've used 1 out of 5 authorizations (which is right), and then it doesn't play. When I click play, I go through the whole cycle again - it prompts me to authorize, I do, it tells me I've used 1 out of 5, and it doesn't play.
Is anyone able to help me?
Many thanks,
Chris

Same problem here. Upgraded to Vista Business. Opened iTunes. Clicked a song that I had purchased previously. It said I needed to authorize the computer. I did. Authorization successful (and my number of auth'd computers went up by one). Clicked the song again. Same dialog box came up, telling me to authorize the computer. I repeated the process to no avail.
It just won't recognize that it is authorized... songs won't play.

BREAKTHROUGH FOR WINDOWS VISTA DRIV

right....i stumbled on this purely by chance so im not sure if it works with everyone's set up.
Im running a SB Li've! soundcard, and have just installed Windows Vista Beta . Obviously there are no drivers out for this OS at present.
I downloaded the XP/2000 drivers for windows, and then EXTRACTED the .exe using WIN RAR.
I placed the extracted folder on my desktop.
I then went into audio/drivers, and clicked on "component install" or something like that. (can't remember what the program is called, but its not hard to find).
It installed them, and asked me to reboot vista, and when i next logged in, it found my PCI sound card!!
EDIT: all above processes were done in Vista, for obvious reasons :P
I have absolutely no idea if this works with any other sound card.
Can someone reply if this does seem to work, as it would solve a lot of peoples problems.
ThanksMessage Edited by jhatcher6 on 07-3-2005 06:25 PM

Antnee wrote:
Yeah, me too, but you know what I meant!
Lol yeah Antnee i know what you mean.
Anyways HOPEFULLY by the time beta 2 comes out Creative just might have released some official drivers, so we don't have to keep relying on hacks for sound :P...

Windows Vista Business problem download & install Adobe Reader 8.1

I tried to download Adobe Reader 8.1 for Windows Vista. The first time I left the check on the photoshop elements pkg. For some reason during the process I got a message Execution of Download failed "pase320_en_US.exe". I went back through and uncecked the download photoshop elements and I got through the whole download session - My Windows Vista security feature asked me several times to press "continue" if I wanted to really do this and I always said yes. It appeared to download fine - I watched the process and then it just seemed to disappear- no message at all. I can't find where the program ever go to my hard drive. Any ideas????????

it is probably downloading it to the Virtualized folder. I could waste alot of time explaining but just download and use Firefox to download and save it to your desktop. You should be able to install from there. Firefox is a better browser than IE anyway.
Good Luck!

HELP! Can Creative build a Windows Vista driver for my Nomad Zen USB 2.0

Hi there,?I just upgraded my operating system to the Windows Vista 34-bit thinking that I would actually be keeping up with the times but instead found myself leaving behind some old "toys" that no longer work with this computer...help!?Fingers crossed that Creative will come up with a solution to this problem. I love my NOMAD!?Thanks.
~Alex

It's multi-voltage (00-240V), so the voltage is not an issue. All you need is the plug adapter, as you mention.

Ati 9700 Windows Vista Driver Problem on a P10-792

Similar Messages

Maybe you are looking for