ATI AIW 9600, No display, RRRG...

Hello,
I just finished building my first computer and have ran into a little problem. I can't get my ATI All-In-Wonder 9600 (non-pro) to show a display.
When it's installed my diagnostic shows RRRG, or Initializing Video interface, and it just hangs there. I tried the card in another system and it works fine. I'm somewhat new at this so any help would be very appreciated.
Thanks, jordan

Well the Fact that you are using an 8X AGP Card should have Nothing to do with it Since the Board is Made for 8X AGP Operation...I think that there is an ATI-9XXX Fix (Patch) Just for MSI Boards, I have to Find the Post where I read this, If I can find it I will Post a Link, so you Can try it Just for the Heck of it.............Sean REILLY875

Similar Messages

ATI Radeon X800 XT or ATI Radeon 9600 Pro Mac Edition for 30" display

I currently have the ATI Radeon 9600 Pro installed in my G5 2.0 DP and it is running my 30" display, but I am having some isssues when I play DVD's the pictures seems to skip every few seconds like it isn't playing fast enough, or it hesitates. I bought the ATI Radeon X800 XT and wanted to know if that would be a better card before I switch it out.

The X800 is a faster card but DVD playback doesn't put much load on the card, so the X800 probably won't help. If it skipping on more than one DVD, the DVD drive is probably having problems. Cleaning the lens ay help.

Help : Will ATI Radeon 9600 Pro run a 30" Cinema Display ? ? ?

just a simple question as the subject suggests /
i have a 1st generate Power Mac G5 Dual 2GHZ / with Radeon 9600 Pro
graphics card . i would simply like to know if it will plug an play nicely
with a 30 inch monitor - be it the Apple Cinema Display or Dell -
anyone have any definitive answers / my thanks in advance
best,
lex

You need a different graphics board with dual-link DVI to run the 30" at full resolution. The AGP cards Apple sold that have dual-link DVI ports are:
ATI Radeon 9650 XT (one single-link, one dual-link DVI)
NVIDIA GeForce 6800 GT DDL (two dual-link DVI)
NVIDIA GeForce 6800 Ultra DDL (two dual-link DVI)
Apple doesn't sell these as retail items, but might sell them as replacement parts, or you could look for them used. Be sure to get Mac versions.
There are two new graphics boards that will work:
ATI Radeon® X800 XT MAC Edition RoHS 256MB AGP (one ADC, one dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170810>
ATI Radeon® 9600 Pro PC & MAC Edition RoHS 256MB AGP (one single-link, one dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>

ATI Radeon 9600 Mac & PC Edition will not work with leopard

When I installed a new ATI Radeon 9600 Mac & PC Edition, 256MB; my Dual 2 GHz G5 (June 2004) will not allow me to drive my Apple Cinema Display while running under leopard, (neither 10.5.1 or 10.5.2 with Leopard Graphics Update).
The mac starts up as usual and gets to the white screen with Apple logo -then the progress ring eventually stalls. The mouse pointer becomes visible and can be moved freely around this screen.
I can connect from other macs on the network and navigate files, but screen sharing results in an all black window.
The Radeon 9600 works fine if I start up the mac with the Tiger installation disk.
I have tried every suggestion that I could find on these boards and elsewhere: zapped the pram, reset the SMU, installed older ATI Drivers, etc...
Of course the G5 is far out of warranty. I've been running Leopard since the day it shipped - so that's out of warranty now, and there is little help to be found on the ATI/AMD website. I'm afraid I'll have to return the card before Apple releases another graphics update.
The stock graphics card that came with this mac is the nVIDIA 64MB GeForce FX 5200 - but it's having trouble keeping up with Leopard's demands - my isight barely works, most special effects in iChat and PhotoBooth are unusable, and of course I'm not given the option to use a transparent menu bar,
I am really good at swapping video cards in the G5 now - but I'm so frustrated.
Does anyone else have any suggestions?
thanks

Hello I have Grafic card ATI Radeon 9600 Pro-256MB install. after Updates. I was after *delete all ATI files besides*
ATINDRV.kext
ATITVOut.kext
ATIRadeon.kext
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeonDVDDriver.bundle
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRNDRV.kext
from System/Library/Extensions run ther 30'' Cinema, mit 2560x1600 but without Quartz Extreme . *I'm very angry of APPLE* 3 week without help, 5 Telefon support with Apple, with ATI without solution.
I know that ATIRadeon9700.kext drive Quartz Extreme. But I don't know what can I do too.
My solution for this moment is only this one. If I know my solution from Apple, ATI or another one look sometimes on
http://discussions.apple.com/thread.jspa?messageID=6645245&#6645245
Message was edited by: knoche
Message was edited by: knoche

Max TV (lcd or plasma) for Dual PowerMac G5 - ATI Radeon 9600 XT

Hi,
Wanted to pose a question as to what the maximum size TV (lcd/plasma) would be if I wanted to use a PowerMac 2x2.0Ghz ATI Radeon 9600 XT video card.
I want it to be the primary display and use it for video conferencing only.
Thanks,
Nikesh

The problems are with the TVs, not the card. Some TV makers only test their DVI/HDMI inputs with video equipment, such as cable boxes, DVD players, and HD video cameras. These all use just a few resolutions (720p, 1080i, 1080p). They are sending video, and clipping of the edges is not a major problem, although there is no good reason to do it with digital video. These devices send out their digital video at their built-in resolution, and don't have to get any resolution information from the display. A computer graphics board can generate many different resolution and relies on the display telling the board which resolutions will work. Some TVs don't send back the correct information, so you may need special software to force the graphics board to a resolution that it doesn't think is supported by the display. Overscan is also done by some TVs. Some, but definitely not all, graphics boards can be set to underscan to get all the desktop on the display, but the pixels may not match exactly, causing some blurring. It is a lot better if a 1920 x 1080 TV will just display the computers 1920 x 1080 on a pixel-to-pixel basis. Some Sony and Westinghouse 1080p sets work properly, some Samsung 1080p don't, but there is no way to tell unless you try it, or can find a pixel-to-pixel mode in the TV manual. Look for sets that support 1080p, not just 1080i.

1360 X 768 Resolution with ATI Radeon 9600 Pro

Maybe this isn't the right forum, but I've been surfing for hours with no luck so please forgive me if this seems out of place.
I output a show recently to QuickTime at 720 24 fps. I'd like to watch it on my 40" Samsung 720 HD TV. I cabled up and managed to get a picture in nearly fullscreen and nearly appropriate aspect ratio, but it doesn't look all that hot. Samsung tells me I want to set my Display settings on my Mac to 1360 x768 to achieve optimum picture. I told them I don't have that option in my settings. They said I probably need to update my driver on my ATI Radeon 9600 Pro video card. I did, still no 1360x768 setting. They said I might want to install the ATI Displays utility. That doesn't seem to offer anything useful. ATI's online support says I might want to install ATI's latest ROM updater, but I can't find any such thing even though the web seems full of mentions of such a beast.
Anyone have any ideas or any suggestion as to where I should post this question?
Martin

FYI:
http://discussions.apple.com/help.jspa#answers
Steve should get the Solved Green Star...
Patrick

Total lockup KM4M-L w/ ATI Radeon 9600 Pro

OK, its been a while since ive had any problems at all but unfortunately I am getting problems with my KM4M-L based PC completely locking up.
I am pretty sure that this is a graphics related issue since it started when I installed an ATI Radeon 9600 Pro 128MB.
I tried removing old nVidia drivers completely, have jusy formatted and re-installed Windows XP Pro with SP2, but the problem is still there. I have tried the card on AGP 2x and 4x, with fastwrite enabled and disabled, and different memory allocations of 64MB and 128MB, but still no joy.
I have also tried the latest two sets of drivers from ATI with no joy, and the latest chipset drivers & BIOS revisions from MSi.
Does anyone know of any compatibility issues between my hardware or something I may have missed in my frustration? Thanks, Huw
Mercury 400W PSU Specs: 3.3V 28A 5V 40A 12V 17A
MSI KM4M-L
AMD Athlon XP 2600+
Crucial 1x512MB PC2700 RAM
ATI Radeon 9600 Pro 128MB
M-Audio Audiophile 24/96
Excelstor 80GB 7200RPM HDD
Maxtor 20GB 5600RPM HDD
LG 52x32x52 CDRW
Unbranded 32x CDROM
S-Talent 128MB Flash Drive
Netgear WG111 USB 802.11g Network Adapter
Thermaltake Xaser Desktop

OK, I have tried a number of things since posting last.
I have been running the PC without the video card, just using the onboard graphics, which didnt seem to help.
I have air dusted, and replaced the GPU heatsink and fan for a large machined one with a more appropriate size of fan but im still getting some problems:
The first is the complete lock-up, which still occurs at seemingly random intervals with no pattern at all.
The second problem is quite frequently on botting the computer, when windows has loaded, the screen display seems to breakdown into random pixels as soon as I start using anything, the effect is hard to describe but its almost as if the screen is being airbrushed, very odd
I should add that I have also removed the Maxtor HDD, since last posting, and also run a series of MemCheckx86 tests which seem to indicate that the RAM is fine.
Any ideas anyone? I am starting to suspect that there may be multiple problems contributing to this annoyance

PPC G5 with ATI Radeon 9600 Pro monitors not getting signal

hi there.
I have a PPC G5 with ATI Radeon 9600 Pro graphics card and I cannot get a monitor to work properly. I am trying an old Apple Studio Display (circa 2001) and a Viewsonic VA520.
It seems like the Apple display should work, but all I get is a black screen. I ran it through a DVI to ADC adapter and had it working for a short period of time, but for some unknown reason it went back to the black screen.
The Viewsonic gives a 'NO SIGNAL' screen and not much else.
Both of these monitors have worked on other G5's. I am guessing this is a graphics card issue.
I appreciate any kind or helpful words! Thank you.

I'm having a similar problem with the G5 not recognizing a VGA monitor on either video out. I have no problem using two monitors with the DVI inputs but I need to use a VGA video splitter for a third screen. It worked at the beginning of this week, and now it refuses any VGA out, even without the splitter, just going into directly into the VGA in of one of my working monitors via a DVI-VGA adapter(i've tried different ones). I read another post about trashing "displays" and "windowserver" preference files but i haven't yet tried that..any clues??

ATI Radeon 9600 Pro fuzziness

Hi,
I have a G5 tower with ATI Radeon 9600 Pro running two fujitsu LCDs, both at 1680x1050, 60 hz. Today, they're both incredibly fuzzy - bordering on unusable. They remain this way if I step down to lower res.
This is only on my login. My wife's login = crisp and clear. Likewise the login screen. Have tried resetting the PRAM, no change.
One thing I do notice today is that the very far right edge of the menu bar is bleeding over into the right screen, which I don't recall it used to do.
Also, the display is shifting about on the horizontal axis, like it's trying to find a better line sync or something (to use an old CRT metaphor)
Any help much appreciated, Robbie
Dual 2GHz G5 Mac OS X (10.4.9)
Dual 2GHz G5 Mac OS X (10.4.9)

Hi-
Welcome to Discussions!
Something new in your (user) startup items?
Since it only occurs in your account, you could have some incompatible extension/utility, or be missing one.
Might compare yours to your wifes-
System Preferences/Accounts/Login Items
Might check to see if you have any Universal Access preferences enabled-
System Preferences/Universal Access

ATI Radeon 9600 Pro / 256MB + Leopard

Hello i have problem to install correct my ATI Radeon 9600 Pro / 256MB. I Installed ATI Radeon 9600 Pro / 64 MB on my mac, because i could not install Logic Pro 8, and I Installed succesful. Install programm said by ATI Radeon 9600 Pro / 256MB that Quartz extreme are not supported, and I have 0 MB VRAM. That's not right. I Tried install update for ATi, after no display. I install Grafic update for OSX and the same. I was found that in system / Library / Extensions/ are ATI Radeon 9700.kext . When I delete this file i can run my Cinema 30'' display, but I cannot run Quartz Extreme. But this card are supported for Quartz extreme. When I put my old card
ATI Radeon 9600 Pro 64MB - is supported for Quartz Extreme but my display Cinema 30'' can only 1280 x 800. What can I do ?
Message was edited by: knoche

Das Problem ist gefunden. Der Mac wurde 2003 gekauft, und wie viele von dieser Serie waren Motherboard fehlerhaft. Ich habe 2 davon. Die Motherboards waren dann 2004 ausgetauscht zu unterschiedlichen Zeiten. Der 1. in April andere November. Dann war alles scheintbar O.K.
Erst jetzt haben wir gesehen durch den Austausch von Grafikkarten das etwas nicht stimmt.
ES WAR MOTHERBOARD DIE FEHLERHAFT IST. In 2. G5 von 2003 geht die Karte einfach wunderbar. Ich hofe das Ich damit helfe den Tausenden da draussen die gleiche Problem haben vor allem in Apple forum, und keiner hat Lösung.
Vielen Dank an die Firma Colormatch - die Jungs sind einfach Klasse Schlau.

ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
Many thanks,
Philip

The Nvidia 7800GS is a flashed card, runs a 30" with ease.
BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
There are also flashed 6600GT AGP cards which will work, but harder to find.
Any of the above 3 will run circles around a 9600.

ATI Radeon 9600 Pro and 2560 x 1600

Hi,
I've got a Radeon 9600 pro and just purchased a new 30" display. However, I can't seem to get it running at 2560 x 1600 - does this card support this resolution?

You will need a graphics card with dual-link DVI.
Starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon® 9600 Pro PC & MAC Edition 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>

SIS 648 max w/ATI AIW 9800 pro issue

Hey all... I am trying to install a new Ati AIW 9800 pro in to my PC. The Motherboard is a MSI 648 Max-L....... Every time I install the old or new Driver set for the Ati card it kills my network connection I cannot connect to the internet or other PC in my network... I cant even ping my router. I have to restore my PC back to the time before the install and all is fine even with the card still in the PC with no drivers loaded. Hers the kicker I can install just the ati display drivers an all is fine but as soon as I install the Multimedia drivers I lose all network connection and have to do a restore to get it back. Even if I delete the drivers and reboot the PC my network connection is gone, have to do a restore to get it back.
Any ideas on this issue????
MB: MSI 648 Max-L
Ram: 512 Kingston 2700
using Mobo onboard: sound and lan
WD hard drive 80 gig
thanks

Here is a copy of my Conflicts and sharing...... it doesent list the multimedia devices that ATI installed as a IRQ conflict. Tehe Multimedia drivers get installed in the sound/video and game controllers..... the sound still works fine.... Hope this may give you some idea of the problem
Thanks
Conflicts/Sharing
Resource Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   SiS Accelerated Graphics Port
I/O Port 0x000003C0-0x000003DF   ALL-IN-WONDER 9800 SERIES
IRQ 18    Realtek AC'97 Audio
IRQ 18    Broadcom 440x 10/100 Integrated Controller
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   SiS Accelerated Graphics Port
Memory Address 0xA0000-0xBFFFF   ALL-IN-WONDER 9800 SERIES
I/O Port 0x000003B0-0x000003BB   SiS Accelerated Graphics Port
I/O Port 0x000003B0-0x000003BB   ALL-IN-WONDER 9800 SERIES

20" ACD, ATI Radeon 9600, and Me

hello all!
Just a quick question. I'm (semi) technically proficient and am pretty good with hardware, but still uneasy with Apple stuff.
I have a ATI Radeon 9600 I believe (It's somewhere around there; whatever came stock with the unit)and I'm going to purchase a 20" ACD in a couple of weeks and have a question:
Now I know that the card is a massive 64 MB! (lol) and I've never upgraded cause never really had a reason. I am aware of splitting your vram over 2 displays can hinder the display causing ghosting and graininess and wondered what you guys thought about purchasing another card to run this display. I have to hold onto my ATI because of the ADC connector, and dropping 99 bucks for a converter is not a wise decision for me quite yet. Now I've been made aware of running multiple cards on a unit. It can't be as simple as popping in another card and taking it from there would it?!? The OS would go nucking futs figuring out what card to use and such I would assume.
So, after all that rigamarole:
CAN I run 2 cards on my MDD dual G4?
If so, how?
also, SHOULD I run a second card if I can (you guys with this setup can help me tons!)
if so, what card would you guys recommend. I'm looking around the 128 MB variety. I don't want to break the bank, getting an 800 dollar display, then a 300 dollar card.
edit: also, the max rez on the 17" studio is 1280 x 1024 and the 20" ACD 1680 x 1050. That shouldn't be a problem should it? I mean, it's only REALLY adding pixels length wise, and only 26 more height so the 20" won't be knocked down in rez to make up for this right?
(forgive my ignorance, though I've used the dual-display setup, I've never owned one. and to be fair, that one had the same size monitors on both)
So, guys (and gals) help me out here!

Mr Mayhem,
if I understand you correctly, you want to use the (older/ADC connection) 17" apple display together with the (newer/DVI connection) 20" apple display together on your MDD Dual 1 G.
My first advice would be to get two displays of the same kind. You will love that (equal screen resolutions just feel better somehow) ... get a 2nd hand 17" or, even better, ditch the 17" and get two 20".
In case you rather stick to your original plan - just get the ATi Radeon 9200 Mac Edition and put it in one of the PCI slots of your MDD. It will feed the 20" via DVI conncetor and it'll cost you roughly around 100.- and the 128 MB onboard RAM will be ok for standard use; maybe just not for betatesting Quake VII Arena. Probably the best bang for buck in your situation. Lood Guck !

ATI X1900 exhibits random display glitches on a Mac Pro

My ATI card has been displaying bizarre and random glitches on my Mac Pro. I am running a dual screen setup: a brand new Samsung SyncMaster 21" lcd and an ancient 15" Apple Studio Display.
On the Samsung, the most common problem I get is what looks like video jitter (the entire image shakes to the right very quickly at random intervals) every couple of seconds. When the problem gets really bad, I start to notice thin horizontal red lines flickering at random places across the entire screen. Both happen while using the computer and during the boot/reboot process... on the old Apple screen, the problem is less noticeable, usually it's just a very quick flash on the screen that can happen every 15 minutes or so. Sometimes a restart clears up the problem but it doesn't always work. I have also tested my machine with a 17" Formac LCD and it displays the red lines as well.
Unfortunately, there does not seem to be a consistent pattern of why this is happening... sometimes it starts only after several hours of use, other times it will start after waking from sleep. Zapping PRAM and resetting the PMU doesn't seem to have any effect.I have put the stock nVidia card in the machine and all the problems go away. This card was actually replaced by Apple last week and things were fine for a few hours but then the problems returned and has gotten worse since then.
Does this sound like the video card is still defective, or could it possibly be the Mac Pro itself?
Jay
Mac Pro Mac OS X (10.4.8)

I would get back into contact with AppleCare and see what they can do. It might well be a driver issue so if you have a drive available, try installing a clean copy of Max OS X onto it, update it to Mac OS X 10.4.8 and see it if makes a difference.

ATI AIW 9600, No display, RRRG...

Similar Messages

Maybe you are looking for