ATi Binary drivers issue [SOLVED]

Hi guys. Giving Arch a try since I am getting sick of gentoo and its enormous compile times.
I recently installed base arch (in less than 30min!!) and installed fglrx drivers.
Now the problem is when I go into Gnome there is a white horizontal line underneath my mouse cursor.
Any ideas?

mille wrote:Yeah, let us know how it goes!
I had to manually edit my xorg.conf after running hwd -x to set my keyboard up correctly.
Oh, is that because your in Sweden? Did it detect the wrong keyboard layout??
And yes will definitely post here if it goes well/bad. Thanks for the help bro.

Similar Messages

[SOLVED]Problem installing ATI catalyst drivers

Hello arch users, ive been having trouble when installing the ati proprietary drivers through pacman. I followed the wiki and added the catalyst repo into my pacman.conf file. however when i type in sudo pacman -Syu i get this:
:: Synchronizing package databases...
error: failed retrieving file 'catalyst.db' from catalyst.apocalypsus.net : The requested URL returned error: 404
error: failed to update catalyst (download library error)
core is up to date
extra is up to date
community is up to date
multilib is up to date
:: Starting full system upgrade...
there is nothing to do
and when i try to install catalyst and catalyst-utils i get this as an output:
resolving dependencies...
looking for inter-conflicts...
:: catalyst-utils and libgl are in conflict. Remove libgl? [y/N] y
:: catalyst and ati-dri are in conflict. Remove ati-dri? [y/N] y
Targets (6): ati-dri-8.0.4-1 [removal] libgl-8.0.4-1 [removal]
netkit-bsd-finger-0.17-7 xinetd-2.3.15-2 catalyst-12.6-3
catalyst-utils-12.6-1
Total Installed Size: 121.91 MiB
Net Upgrade Size: 74.13 MiB
Proceed with installation? [Y/n] y
(4/4) checking package integrity [######################] 100%
error: catalyst-utils: signature from "Vi0L0 <[email protected]>" is unknown trust
error: catalyst: signature from "Vi0L0 <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
any idea on what to do?
i want to use the proprietary over the open source because it gives me less problems when using 3d rendering.
or are there any other ways of installing these packages other than pacman?
Last edited by CokaBear (2012-07-19 19:45:35)

You could add 'SigLevel = Never' under the catalyst repo in pacman.conf, so that it doesn't check for package integrity.
And about the 404, maybe your 'Server' is incorrect. I use 'Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch'

Probs with ATI Catalysts Drivers

I’m currently using ATI Catalyst Drivers 6.14.10.6404 (3.9) for my ATI Radeon 9600xt.
If I upgrade to the latest ATI or Omega Drivers (4.7 I think), my card crashes and is very unstable.
my current graphics settings are:
enabled VPU recover
fast write is on
AGPx8
Why does 3.9 work and 4.7 not work, I have only had this problem since changing to this board.
Any help appreciated.

Well I hope it works for you engrrowl! I was installing a slipstreamed version of XP with SP2. But that sure didn't help me. I would randomly have my screen corrupt with my 9700. And that stupid card has given me headaches since I got an LCD. So driver incompatibility used to make my screen go black all the time. It would then revert to normal (maybe!). But there were many times I had to shutdown by the keyboard and disconnect the DVI cable to get it to work again. And the LCD is a Samsung so it's not cheap.
I broke down the other night and when I had to reinstall WinXP from scratch I reverted to an older GF4. This morning I ordered a Geforce 6800, and it will "upgrade" fine. But if I tried to go from an ATI to an Nvidia I would have had to reload my OS again. So it worked out for me.
But it's strange that switching video cards solved all my "issues". That and the fact that I've never really like ATI's drivers means I will never get another of their cards.

Can't Install ATI Video Drivers on Bootcamp with Windows 7 64-bit

I've just installed Windows 7 64-bit under Bootcamp but can't seem to get any ATI Graphics drivers to install. I ran into the common blank-screen problem during installation and temporarily solved that by deleting atikmdag.sys from within Lion. At the moment W7 runs with 640x800 resolution (pretty chunky on a 27" screen!). The ATI Catalyst software just doesn't run at all (i.e click on it and nothing happens). I've used DriverSweeper to force remove all drivers and start again but every time I reboot, Windows automatically reinstalls the default driver that seems to be causing the problem in the first place!
For reference, here are iMac specs:
iMac 27" w/ OS X Lion 10.7.2
2.8Ghz Intel Core i7
4GB 1067Mhz DDR3 RAM
ATI Radeon HD 4850 512MB GDDR3
Any ideas?
Thanks

gets asked 100s of times, daily too. check my profile bookmarks for "AMD" thread(s).

OTA Update 4.08.605.2 "Rebooting Now..." Issue - SOLVED!

After so many tries and frustration I finally came across the information below and it worked like a charm
http://forums.androidcentral.com/verizon-droid-incredible/134246-second-gb-update-patch-wont-reboot-issue-solved.html
Can't say this will work for everyone, but it worked for me.
Boot into recovery
Press and hold Power, Choose "Restart" option
When screen turns off, press and hold Volume Down and Power
When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
Press the Power button to select “RECOVERY.”
When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
Using the volume button, scroll down to “Wipe cache partition” and select it.
Select "Reboot system now"
You can now wait for the update to show up again, or try one of the methods in the post: For those who want the second GB update/patch to get the update again. It should reboot this time. Beware, it will stay at the Droid Eye screen after reboot for a while (~5 mins), but eventually, it did get installed. Be sure to make a lot of space for it though...

The restart option that AmDroid is talking about is not on the regular phone menu. Please read his post carefully. What he is talking about is in an advanced recovery based menu option.
Also, I was on 2.2 and the clear cache set date and time forward trick did not work for me to get the udpate. The clear cache and set date and time forward trick seems to mostly work if you are already on 4.06 software version and want to get the 4.08 software version.
For those on 2.2, patience is warranted! However, if you really cant wait and want to go the 4.06 update manually, you can search Android Forums dot com for manually install gingerbread. And don't worry about the article talking about being rooted. You dont need to be rooted. The instructions will work for a stock phone too. As soon as you do the manual 4.06, the 4.08 update will show up immediately.
Hope this helps!

Using Linux with Nvidia binary drivers, how do I enable WebGL in Firefox 8?

I've heard it is possible to use WebGL in firefox 8 for linux if using Nvidia binary drivers, but I haven't found a succinct recipe. can someone point me to a working recipe?
thanks!

You have a WebGL renderer listed on the Help > Troubleshooting Information page:
WebGL Renderer: NVIDIA Corporation -- GeForce 9800 GT/PCI/SSE2/3DNOW! -- 3.3.0 NVIDIA 280.13
You can check the values of the webgl prefs on the about:config page via the location bar.
*http://kb.mozillazine.org/about:config

Hi all ...I would like to add a language that is not available in Photoshop cc2014 .. My computer writes it but backwards .. How can I have this issue solves?

hi all ...I would like to add a language that is not available in Photoshop cc2014 .. My computer writes it but backwards .. How can I have this issue solves?

What language are you talking about? You might need to enable Edit/Preferences/Type/Middle Eastern and South Asian for proper display.

IMac Intel Core Duo and ATI Video Drivers

I was wondering if the latest ATI Catalyst drivers are compatible with the X1600 that comes in the Intel Core DUO iMacs. I wasn't sure if the driver needed to come from apple or not

Nope. The latest Catalyst drivers 6.X are not compatible with the iMac vid card. You need the driver on the disc that Bootcamp install creates. It's a ver 8.x driver made especially for our Radeon Mobility x1600's.

Compact 2013 Interrupt Issue Solved

As flagged as a comment to the post here, "My iST isn't called", there is a solution in the pipeline (as an update) for ARM interrupt issue. The issue is that interrupts that are close to timer ticks get lost. There is a complete discussion
of this on my blog at:
http://embedded101.com/Blogs/David-Jones/entryid/586/Windows-Embedded-Compact-2013-Interrupt-Issue-Solved
Cheers David Jones
Embedded MVP

As flagged as a comment to the post here, "My iST isn't called", there is a solution in the pipeline (as an update) for ARM interrupt issue. The issue is that interrupts that are close to timer ticks get lost. There is a complete discussion
of this on my blog at:
http://embedded101.com/Blogs/David-Jones/entryid/586/Windows-Embedded-Compact-2013-Interrupt-Issue-Solved
Cheers David Jones
Embedded MVP

Bootcamp 3.2 on my iMac 27", OSX 10.6 machine - but my ATI Graphic Drivers installation is failing.

I'm setting Bootcamp 3.2 on my iMac 27", OSX 10.6 machine - but my ATI Graphic Drivers installation is failing.
i get the message: "setup did not find a driver compatible with your current hardware or operating system., Setup will now exit."
i think it's having problems "Extracting setup.exe" - i get the message "Cannot create setup.exe" and "Cannot create data1.cab"
help!

You're welcome.
Thanks for the points.
10 points for your solution!

[SOLVED] ATI Catalyst / Xorg issue with Multihead (3monitor)

i'm having problems for a long time, with different versions of the ATI Catalyst driver and Xorg,
right now i'm using this versions,
catalyst-hook 11.2-2
catalyst-utils 11.2-1
lib32-catalyst-utils 11.2-1
xorg-server 1.9.4.901-1
xorg-server-common 1.9.4.901-1
xorg-server-utils 7.6-2
the catalyst package are from the catalyst server recommended by the Arch Wiki
http://catalyst.apocalypsus.net/repo/catalyst/x86_64
the problem that i have is that when i try to pass from one monitor to another, when
i pass to the 3rd one the X crashes, this happen always with the same monitor no matter what.
here is the backtrace from the startx logs,
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x49f788]
1: /usr/bin/X (0x400000+0x60349) [0x460349]
2: /lib/libpthread.so.0 (0x7f28028b7000+0xf150) [0x7f28028c6150]
3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86ffff) [0x7f27ff563fff]
4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86fb5d) [0x7f27ff563b5d]
5: /usr/bin/X (0x400000+0x13bce2) [0x53bce2]
6: /usr/bin/X (0x400000+0x13be31) [0x53be31]
7: /usr/bin/X (0x400000+0x13a880) [0x53a880]
8: /usr/bin/X (miPointerUpdateSprite+0x18c) [0x45871c]
9: /usr/bin/X (0x400000+0x5892d) [0x45892d]
10: /usr/bin/X (0x400000+0x164266) [0x564266]
11: /usr/bin/X (mieqProcessDeviceEvent+0x172) [0x49ef52]
12: /usr/bin/X (mieqProcessInputEvents+0xcc) [0x49f08c]
13: /usr/bin/X (ProcessInputEvents+0x9) [0x469969]
14: /usr/bin/X (0x400000+0x2cf73) [0x42cf73]
15: /usr/bin/X (0x400000+0x2131e) [0x42131e]
16: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f2801837dcd]
17: /usr/bin/X (0x400000+0x20ec9) [0x420ec9]
Segmentation fault at address (nil)
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
i wanted to know if there is any official forum / bug tracker of amd/ati where report this bug,
or if one of you had this kind of problem before and can give me a hand to resolve this, i would be grateful.
here is the ati report about the system info,
http://pastebin.com/jU73mU4W
http://ideone.com/mcISC
thanks in advance.
regards.
Last edited by hord (2011-07-10 20:26:12)

solved!
since the cursor used through the proprietary catalyst driver have issues, use instead the SW cursor,
Section "Device"
Option "SWCursor" "true"
EndSection
[0] http://ati.cchtml.com/show_bug.cgi?id=86
[1] http://ati.cchtml.com/show_bug.cgi?id=117
[2] http://phoronix.com/forums/showthread.p … post209030
Last edited by hord (2011-07-10 20:25:23)

[SOLVED] ATI Catalyst Driver Issues

I'm sure issues with these drivers get posted often, but I'm honestly not entirely sure how to search for this. I installed the base system with no issues, but when it came to adding a DE, I had some issues. I tried several times to install the catalyst drivers for my radeon hd 6800. I installed from the official repository using:
#pacman -S catalyst-dkms catalyst-utils
I had no luck starting X server after that so I tried installing from Vi0l0's unnoficial repository. This caused X Server to seg fault every time I attempted to start it.
I'm a little confused on how I am even using gnome at this point considering I have not successfully installed a graphics driver.
I blacklisted radeon and uninstalled catalyst and somehow was able to start X Server. I'm obviously using a lame driver considering every time I move a console window around it moves at around 2 FPS.
How can I successfully install the proprietary fglrx/catalyst drivers?
Last edited by instantaphex (2012-12-10 04:49:49)

Thanks for the replies. It's been a busy week and I have to move my desktop into the kitchen to get internet access because I'm also having ndiswrapper issues. Here is my Xorg.0.log
[ 6.208]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 6.208] X Protocol Version 11, Revision 0
[ 6.208] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 6.209] Current Operating System: Linux archbox 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64
[ 6.209] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8c2fca85-5d82-4e80-9492-3ffe9e0760e5 ro quiet
[ 6.209] Build Date: 08 November 2012 07:09:29PM
[ 6.209]
[ 6.209] Current version of pixman: 0.28.0
[ 6.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.209] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.209] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 9 06:53:08 2012
[ 6.231] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.231] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.233] (==) ServerLayout "aticonfig Layout"
[ 6.233] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 6.233] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 6.233] (**) | |-->Device "aticonfig-Device[0]-0"
[ 6.233] (==) Automatically adding devices
[ 6.233] (==) Automatically enabling devices
[ 6.233] (==) Automatically adding GPU devices
[ 6.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.246] Entry deleted from font path.
[ 6.266] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.266] Entry deleted from font path.
[ 6.266] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.267] Entry deleted from font path.
[ 6.267] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.267] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.267] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.267] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.267] (II) Loader magic: 0x7fcc40
[ 6.267] (II) Module ABI versions:
[ 6.267] X.Org ANSI C Emulation: 0.4
[ 6.267] X.Org Video Driver: 13.1
[ 6.267] X.Org XInput driver : 18.0
[ 6.267] X.Org Server Extension : 7.0
[ 6.270] (--) PCI:*(0:1:0:0) 1002:6739:174b:174b rev 0, Mem @ 0xd0000000/268435456, 0xfd5c0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 6.270] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.270] Initializing built-in extension Generic Event Extension
[ 6.270] Initializing built-in extension SHAPE
[ 6.270] Initializing built-in extension MIT-SHM
[ 6.270] Initializing built-in extension XInputExtension
[ 6.270] Initializing built-in extension XTEST
[ 6.270] Initializing built-in extension BIG-REQUESTS
[ 6.271] Initializing built-in extension SYNC
[ 6.271] Initializing built-in extension XKEYBOARD
[ 6.271] Initializing built-in extension XC-MISC
[ 6.271] Initializing built-in extension SECURITY
[ 6.271] Initializing built-in extension XINERAMA
[ 6.271] Initializing built-in extension XFIXES
[ 6.271] Initializing built-in extension RENDER
[ 6.271] Initializing built-in extension RANDR
[ 6.271] Initializing built-in extension COMPOSITE
[ 6.271] Initializing built-in extension DAMAGE
[ 6.271] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.271] Initializing built-in extension DOUBLE-BUFFER
[ 6.271] Initializing built-in extension RECORD
[ 6.271] Initializing built-in extension DPMS
[ 6.271] Initializing built-in extension X-Resource
[ 6.271] Initializing built-in extension XVideo
[ 6.271] Initializing built-in extension XVideo-MotionCompensation
[ 6.271] Initializing built-in extension XFree86-VidModeExtension
[ 6.271] Initializing built-in extension XFree86-DGA
[ 6.271] Initializing built-in extension XFree86-DRI
[ 6.271] Initializing built-in extension DRI2
[ 6.271] (II) "glx" will be loaded by default.
[ 6.271] (II) LoadModule: "glx"
[ 6.307] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.325] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 6.325] compiled for 6.9.0, module version = 1.0.0
[ 6.326] Loading extension GLX
[ 6.326] (II) LoadModule: "fglrx"
[ 6.326] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 6.497] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 6.498] compiled for 1.4.99.906, module version = 9.0.2
[ 6.498] Module class: X.Org Video Driver
[ 6.499] (II) Loading sub module "fglrxdrm"
[ 6.499] (II) LoadModule: "fglrxdrm"
[ 6.499] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.513] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.513] compiled for 1.4.99.906, module version = 9.0.2
[ 6.513] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 6.513] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 6.513] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 6.513] (++) using VT number 1
[ 6.513] (WW) Falling back to old probe method for fglrx
[ 6.541] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 6.555] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.555] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.569] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 6.577] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 6.577] (II) AMD Video driver is signed
[ 6.577] (II) fglrx(0): pEnt->device->identifier=0x1cfb770
[ 6.578] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 6.578] (II) Loading sub module "vgahw"
[ 6.578] (II) LoadModule: "vgahw"
[ 6.578] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 6.591] (II) Module vgahw: vendor="X.Org Foundation"
[ 6.591] compiled for 1.13.0, module version = 0.1.0
[ 6.591] ABI class: X.Org Video Driver, version 13.1
[ 6.591] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 6.591] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 6.591] (==) fglrx(0): Default visual is TrueColor
[ 6.591] (**) fglrx(0): Option "DPMS" "true"
[ 6.592] (==) fglrx(0): RGB weight 888
[ 6.592] (II) fglrx(0): Using 8 bits per RGB
[ 6.592] (==) fglrx(0): Buffer Tiling is ON
[ 6.592] (II) Loading sub module "fglrxdrm"
[ 6.592] (II) LoadModule: "fglrxdrm"
[ 6.592] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.592] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.592] compiled for 1.4.99.906, module version = 9.0.2
[ 6.596] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.596] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.596] (**) fglrx(0): NoAccel = NO
[ 6.596] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 6.596] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739)
[ 6.596] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x174b)
[ 6.596] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 6.596] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 6.596] (--) fglrx(0): MMIO registers at 0xfd5c0000
[ 6.596] (--) fglrx(0): I/O port at 0x0000ce00
[ 6.596] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 6.619] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 6.621] (II) Loading sub module "vbe"
[ 6.621] (II) LoadModule: "vbe"
[ 6.621] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 6.622] (II) Module vbe: vendor="X.Org Foundation"
[ 6.622] compiled for 1.13.0, module version = 1.1.0
[ 6.622] ABI class: X.Org Video Driver, version 13.1
[ 6.622] (II) fglrx(0): VESA BIOS detected
[ 6.622] (II) fglrx(0): VESA VBE Version 3.0
[ 6.622] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 6.622] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 6.622] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 6.622] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 6.622] (II) fglrx(0): VESA VBE OEM Product: BARTS
[ 6.622] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 6.662] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 6.662] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 6.662] (II) fglrx(0): PCIE card detected
[ 6.662] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 6.662] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 6.662] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 6.662] (EE) fglrx(0): Fail to init MGPU configuration:0x0!
[ 6.662] (II) fglrx(0): RandR 1.2 support is enabled!
[ 6.662] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 6.662] (==) fglrx(0): Center Mode is disabled
[ 6.662] (II) Loading sub module "fb"
[ 6.662] (II) LoadModule: "fb"
[ 6.662] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.663] (II) Module fb: vendor="X.Org Foundation"
[ 6.663] compiled for 1.13.0, module version = 1.0.0
[ 6.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.663] (II) Loading sub module "ddc"
[ 6.663] (II) LoadModule: "ddc"
[ 6.663] (II) Module "ddc" already built-in
[ 6.783] (EE) fglrx(0): ASYNCIO service has not started yet while register message handler for DAL
[ 6.785] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 6.785] (II) fglrx(0): Output DFP2 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP3 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP4 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP5 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP6 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP7 has no monitor section
[ 6.785] (II) fglrx(0): Output CRT1 has no monitor section
[ 6.785] (II) Loading sub module "ddc"
[ 6.785] (II) LoadModule: "ddc"
[ 6.785] (II) Module "ddc" already built-in
[ 6.785] (II) fglrx(0): Connected Display0: CRT1
[ 6.785] (II) fglrx(0): Display0: Failed to get EDID information.
[ 6.785] (II) fglrx(0): EDID for output DFP1
[ 6.785] (II) fglrx(0): EDID for output DFP2
[ 6.785] (II) fglrx(0): EDID for output DFP3
[ 6.785] (II) fglrx(0): EDID for output DFP4
[ 6.785] (II) fglrx(0): EDID for output DFP5
[ 6.785] (II) fglrx(0): EDID for output DFP6
[ 6.785] (II) fglrx(0): EDID for output DFP7
[ 6.785] (II) fglrx(0): EDID for output CRT1
[ 6.785] (II) fglrx(0): Manufacturer: ACR Model: 53 Serial#: 2456821854
[ 6.785] (II) fglrx(0): Year: 2009 Week: 27
[ 6.785] (II) fglrx(0): EDID Version: 1.3
[ 6.785] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 6.785] (II) fglrx(0): Sync: Separate
[ 6.786] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 6.786] (II) fglrx(0): Gamma: 2.20
[ 6.786] (II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
[ 6.786] (II) fglrx(0): First detailed timing is preferred mode
[ 6.786] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603
[ 6.786] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 6.786] (II) fglrx(0): Supported established timings:
[ 6.786] (II) fglrx(0): 720x400@70Hz
[ 6.786] (II) fglrx(0): 640x480@60Hz
[ 6.786] (II) fglrx(0): 640x480@67Hz
[ 6.786] (II) fglrx(0): 640x480@72Hz
[ 6.786] (II) fglrx(0): 640x480@75Hz
[ 6.786] (II) fglrx(0): 800x600@56Hz
[ 6.786] (II) fglrx(0): 800x600@60Hz
[ 6.786] (II) fglrx(0): 800x600@72Hz
[ 6.786] (II) fglrx(0): 800x600@75Hz
[ 6.786] (II) fglrx(0): 832x624@75Hz
[ 6.786] (II) fglrx(0): 1024x768@60Hz
[ 6.786] (II) fglrx(0): 1024x768@70Hz
[ 6.786] (II) fglrx(0): 1024x768@75Hz
[ 6.786] (II) fglrx(0): 1280x1024@75Hz
[ 6.786] (II) fglrx(0): 1152x864@75Hz
[ 6.786] (II) fglrx(0): Manufacturer's mask: 0
[ 6.786] (II) fglrx(0): Supported standard timings:
[ 6.786] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.786] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.786] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.786] (II) fglrx(0): Supported detailed timing:
[ 6.786] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 6.786] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 6.786] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 6.786] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 6.786] (II) fglrx(0): Monitor name: Acer V173
[ 6.786] (II) fglrx(0): Serial No: LE10D0928502
[ 6.786] (II) fglrx(0): EDID (in hex):
[ 6.786] (II) fglrx(0): 00ffffffffffff00047253005e207092
[ 6.786] (II) fglrx(0): 1b13010368221b78ca3dc5a6564a9a25
[ 6.786] (II) fglrx(0): 125054bfef80714f8140818001010101
[ 6.786] (II) fglrx(0): 010101010101302a009851002a403070
[ 6.786] (II) fglrx(0): 1300520e1100001e000000fd00384c1f
[ 6.786] (II) fglrx(0): 500e000a202020202020000000fc0041
[ 6.786] (II) fglrx(0): 63657220563137330a0a0a0a000000ff
[ 6.786] (II) fglrx(0): 004c45313044303932383530320a001d
[ 6.786] (II) fglrx(0): Printing probed modes for output CRT1
[ 6.786] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 6.786] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1328 1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.786] (II) fglrx(0): Output DFP1 disconnected
[ 6.786] (II) fglrx(0): Output DFP2 disconnected
[ 6.786] (II) fglrx(0): Output DFP3 disconnected
[ 6.786] (II) fglrx(0): Output DFP4 disconnected
[ 6.786] (II) fglrx(0): Output DFP5 disconnected
[ 6.786] (II) fglrx(0): Output DFP6 disconnected
[ 6.786] (II) fglrx(0): Output DFP7 disconnected
[ 6.786] (II) fglrx(0): Output CRT1 connected
[ 6.786] (II) fglrx(0): Using exact sizes for initial modes
[ 6.786] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 6.786] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.786] (II) fglrx(0): DPI set to (96, 96)
[ 6.786] (II) fglrx(0): Eyefinity capable adapter detected.
[ 6.786] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected.
[ 6.786] (==) fglrx(0): PseudoColor visuals disabled
[ 6.786] (II) Loading sub module "ramdac"
[ 6.786] (II) LoadModule: "ramdac"
[ 6.786] (II) Module "ramdac" already built-in
[ 6.786] (==) fglrx(0): NoDRI = NO
[ 6.786] (==) fglrx(0): Capabilities: 0x00000000
[ 6.786] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 6.786] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 6.786] (==) fglrx(0): UseFastTLS=0
[ 6.786] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 6.786] (--) Depth 24 pixmap format is 32 bpp
[ 6.786] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 6.786] (WW) fglrx(0): ***********************************************************
[ 6.786] (WW) fglrx(0): * DRI initialization failed *
[ 6.786] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 6.787] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 6.787] (WW) fglrx(0): ***********************************************************
[ 6.787] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 6.796] (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
[ 6.796] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
[ 6.796] (II) fglrx(0): Largest offscreen area available: 1280 x 6911
[ 6.797] (==) fglrx(0): Backing store disabled
[ 6.797] Loading extension FGLRXEXTENSION
[ 6.797] (**) fglrx(0): DPMS enabled
[ 6.798] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 6.798] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 6.798] (II) LoadModule: "glesx"
[ 6.798] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 6.863] (II) Module glesx: vendor="X.Org Foundation"
[ 6.863] compiled for 1.4.99.906, module version = 1.0.0
[ 6.863] Loading extension GLESX
[ 6.863] (II) fglrx(0): GLESX enableFlags = 576
[ 6.867] (II) LoadModule: "amdxmm"
[ 6.868] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 6.878] (II) Module amdxmm: vendor="X.Org Foundation"
[ 6.878] compiled for 1.4.99.906, module version = 2.0.0
[ 6.878] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 6.878] (EE) fglrx(0): XMM failed to initialize
[ 6.878] (WW) fglrx(0): No XV video playback available
[ 6.878] (II) fglrx(0): Enable composite support successfully
[ 6.878] (WW) fglrx(0): Option "VendorName" is not used
[ 6.878] (WW) fglrx(0): Option "ModelName" is not used
[ 6.878] (==) fglrx(0): Silken mouse enabled
[ 6.878] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 6.879] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.939] (--) RandR disabled
[ 6.968] (II) AIGLX: Screen 0 is not DRI capable
[ 6.968] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 6.968] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 7.220] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 7.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.220] (II) LoadModule: "evdev"
[ 7.221] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.232] (II) Module evdev: vendor="X.Org Foundation"
[ 7.232] compiled for 1.13.0, module version = 2.7.3
[ 7.232] Module class: X.Org XInput Driver
[ 7.232] ABI class: X.Org XInput driver, version 18.0
[ 7.232] (II) Using input driver 'evdev' for 'Power Button'
[ 7.232] (**) Power Button: always reports core events
[ 7.232] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 7.232] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.232] (--) evdev: Power Button: Found keys
[ 7.232] (II) evdev: Power Button: Configuring as keyboard
[ 7.232] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event13"
[ 7.232] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.232] (**) Option "xkb_rules" "evdev"
[ 7.232] (**) Option "xkb_model" "evdev"
[ 7.232] (**) Option "xkb_layout" "us"
[ 7.268] (II) config/udev: Adding input device Power Button (/dev/input/event12)
[ 7.268] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.268] (II) Using input driver 'evdev' for 'Power Button'
[ 7.268] (**) Power Button: always reports core events
[ 7.268] (**) evdev: Power Button: Device: "/dev/input/event12"
[ 7.268] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.268] (--) evdev: Power Button: Found keys
[ 7.268] (II) evdev: Power Button: Configuring as keyboard
[ 7.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input12/event12"
[ 7.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.268] (**) Option "xkb_rules" "evdev"
[ 7.268] (**) Option "xkb_model" "evdev"
[ 7.268] (**) Option "xkb_layout" "us"
[ 7.268] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 7.268] (II) No input driver specified, ignoring this device.
[ 7.268] (II) This device may have been added with another device file.
[ 7.269] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event0)
[ 7.269] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 7.269] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 7.269] (**) Logitech Optical USB Mouse: always reports core events
[ 7.269] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event0"
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
[ 7.269] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[ 7.269] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
[ 7.269] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 7.269] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/input/input0/event0"
[ 7.269] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8)
[ 7.269] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
[ 7.269] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 7.269] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 7.269] (II) No input driver specified, ignoring this device.
[ 7.269] (II) This device may have been added with another device file.
[ 7.269] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 7.269] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.269] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.269] (**) Logitech USB Keyboard: always reports core events
[ 7.269] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 7.269] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 7.269] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.269] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/input/input1/event1"
[ 7.269] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 7.269] (**) Option "xkb_rules" "evdev"
[ 7.269] (**) Option "xkb_model" "evdev"
[ 7.269] (**) Option "xkb_layout" "us"
[ 7.270] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 7.270] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.270] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.270] (**) Logitech USB Keyboard: always reports core events
[ 7.270] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 7.270] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 7.270] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 7.270] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 7.270] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.270] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 7.270] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 7.270] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.270] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/input/input2/event2"
[ 7.270] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 7.270] (**) Option "xkb_rules" "evdev"
[ 7.270] (**) Option "xkb_model" "evdev"
[ 7.270] (**) Option "xkb_layout" "us"
[ 7.271] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 7.271] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 7.272] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.273] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event11)
[ 7.273] (II) No input driver specified, ignoring this device.
[ 7.273] (II) This device may have been added with another device file.
[ 7.273] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 7.273] (II) No input driver specified, ignoring this device.
[ 7.273] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event7)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event8)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event9)
[ 7.276] (II) No input driver specified, ignoring this device.
[ 7.276] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 7.276] (II) No input driver specified, ignoring this device.
[ 7.276] (II) This device may have been added with another device file.
[ 7.279] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 7.287] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 7.287] (II) fglrx(0): Using EDID range info for horizontal sync
[ 7.287] (II) fglrx(0): Using EDID range info for vertical refresh
[ 7.287] (II) fglrx(0): Printing DDC gathered Modelines:
[ 7.287] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 7.287] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.287] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.287] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.288] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7.288] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7.288] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10.785] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 10.785] (II) fglrx(0): Using hsync ranges from config file
[ 10.785] (II) fglrx(0): Using vrefresh ranges from config file
[ 10.785] (II) fglrx(0): Printing DDC gathered Modelines:
[ 10.785] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.785] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.786] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.739] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 23.739] (II) fglrx(0): Using hsync ranges from config file
[ 23.739] (II) fglrx(0): Using vrefresh ranges from config file
[ 23.739] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.739] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.739] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.928] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 24.928] (II) fglrx(0): Using hsync ranges from config file
[ 24.928] (II) fglrx(0): Using vrefresh ranges from config file
[ 24.928] (II) fglrx(0): Printing DDC gathered Modelines:
[ 24.928] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 24.928] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.928] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.928] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.929] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.929] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.929] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 27.583] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 27.583] (II) fglrx(0): Using hsync ranges from config file
[ 27.583] (II) fglrx(0): Using vrefresh ranges from config file
[ 27.583] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.583] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 27.583] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
I'll try out the suggestions you guys have given and update.

[SOLVED] Artifacts with EXAPixmap ON and KMS with ATI OSS drivers

I had some problems for many months on my Arch Linux installation and I couldnt figure out what was causing it, so, because I found the sollution, I wanted to post it here and share it with you.
I, like others, was experiencing huge artifacts with KMS and EXAPixmaps on, on various cases, visuals and textures. After fiddling with all radeon options in xorg.conf and KMS on/off I found out thats its best for me to have KMS on (I couldnt play wine games otherwise) and EXAPixmaps off. But then again, when EXAPixmaps was off, I had poor 2D performance with KMS on, Xrender acceleration wasnt working and was falling back to software engine. Solution came from something that was brought to my attention in this topic. I ve set ARGB visuals off, raster engine for rendering and tried EXAPixmaps on.
It worked! Everything are as they supposed to be. Xrender engine and composite manager are finally working, no more artifacts. Framebuffer memory on my radeon card was somehow cleared. I then later found out an awkward solution on how to clear it by demand... Start X with vesa driver... then fix again xorg.conf back to radeon driver and reboot.
Now I have both 2D and 3D acceleration, I am logged in with KDE and have good performance. My glxgears output is 1000 to 1150 fps (vsync off) and I am using Xrender for the KDE desktop effects.
EDIT: I must clarify that I have an ATI Radeon 9200 Mobility M9+ (R200 serries)
Last edited by twilight0 (2011-05-13 20:30:27)

I 've made some more edits and this is my current xorg.conf
http://pastebin.com/x6ubG80K
I have ColorTiling set on for performance, be careful as it may be resource hungry in 3D apps but it increases dramatically fps.
You can try setting off EXAPixmaps as well and see how it goes, but then you ll have poor 2D performance and yet videos will play just fine either way.

[SOLVED] kms, xf86-video-ati: direct rendering issues

Hi,
Quite possible I'm doing something completely wrong, but how to enable direct rendering on an r500 chip (x1400 mobility radeon) with kms enabled?
I let the module be loaded early (-> mkinitcpio) and have radeon.modeset=1 in my grub-menu.lst. kernel mode setting works, the x-server starts (in contrast to when having modeset=0, then Xorg segfaults due to libglx) and in the Xorg.0.log when looking for DRI, it tells me that the modules dri, dri2 and glx are all properly loaded. Nevertheless, glxgears is damn slow as well as glxinfo telling me that direct rendering is not enabled.
Using the git versions of xf86-video-ati and libdrm didn't change the bahaviour.
package versions:
kernel 2.6.36.2-1
mesa 7.9-1
libdrm-git (from a few minutes ago)
xf86-video-ati-git (from a few minutes ago)
xorg.conf: there's no difference in having LoadModule "dri", "dri2" in the Module-Section or having Option "DRI" "on" in the Device section or not having any xorg.conf at all.
Any ideas? or is dri up and running and glxgears just sucks and glxinfo doesn't show the correct information?
Last edited by rochus (2010-12-17 18:27:56)

you have to install ati-dri
and BTW, you should not use libdrm-git if you don't planning compile mesa yourself. libdrm in arch repo is new enough.

[SOLVED] Steam not working or installing well and AMD drivers issues

Well, I figured this was the place to post.
I just installed Arch in my main box. Since I tried to install steam from the repos using pacman but i got the 'package not found'.
So I downloaded from the mirror in the official arch repos.
Then i was going to run steam (that's in /usr/bin/steam) and the script couldnt find a file that was just next door. Thing was, the script couldnt find a file next door cause it will try to find it from / . I added /home/[myuser] .
I changed the code sightly to my directory so it will find the .xz file.
Then, the client apparently installed (since it created a .steam dir) but it did not appear on the screen. I tried running it from .steam, but i get absolutely nothing.
Also, looking at the script, the installation should have created a desktop icon and, it did not. So its possible that the installation itself is not working.
Since I make this thread (and since i have your attention) , I want to post another problem that may be, maybe lagging my XFCE interface.
Its the AMD drivers for my 6950 cards. I saw that the drivers ran with good performance on one of the games I like, so I tried to install them.
Weirdly, they didnt (couldnt run a module at the ending) ... it thre an error saying that there were problems with the installation. I wasnt running X, and no drivers were previously installed.. but I booted into X and it worked, and also I can see the signature saying 'Testing use Only' from AMD at the bottom.
Last edited by nullwiz (2013-08-23 13:43:47)

ChemBro wrote:
You usually get a "package not found", if you don't update pacman (pacman -Sy) beforehand.
I changed the code sightly to my directory so it will find the .xz file.
And this sounds like you don't know how to install Arch packages.
and also I can see the signature saying 'Testing use Only' from AMD at the bottom.
Um. Where did you get that driver? Because this thing is so old, AMD does not do the watermark thing anymore.
I did pacman -Sy , why it still cant find it?
Got the driver from the page, its a beta driver.. You sure? Im triying to reinstall but i still get an error.
Please, enlighten me.

ATi Binary drivers issue [SOLVED]

Similar Messages

Maybe you are looking for