Ati card, msi board, kingston ram, blank screen at reboot.

i see an awful lot of listings in this forum for the problem of screen remaining blank after reboot.
i also see the psu being blamed and yet it has almost never solved the issue for people.
there is a problem and there is no solution right?
all my components are fine, they are up to 'spec' yet they dont work, why?
i am fed up with opening my pc to tweak it, reset cmos, unplug drives, check power supply. at this rate i am going to fry something. you cant keep doing these things without f'ing something up, its messing with probabilities. a half dozen times? fine. dozens? youre screwed.
there is something going on with the mb. i see others claim all boards with that chipset have issues. so what? it is still an MSI issue since i have an MSI board.
i set everything up according to instructions and i am screwed. MSI lied to me and to you.
the board does not run as it claims. i can not run a chip at its normal speed with a graphics card it should. again why? nothing is oc'd, all temps are norma, even with noting but mb, vid card and ram, its screwed.
go ahead and blame my temps, blame my psu, blame ati but at the end i have an MSI board that does not perform as sold.
i also see a lot of mention of previos bios versions working better. again seems like MSI is screwing around with us. i have so many spare parts from trying to get this board to run well that i can build another pc. it will NOT be MSI.

Same thread in the bios section already so this one is closed.

Similar Messages

  • KT4 Ultra + Geil 512mb pc3200 ram = Blank Screen

    Hello
    Recently purchased one 512mb pc3200 Geil ram, but I cannot get my system to run with this. I have not flashed a new bios so it is still running Amibios 1.2.
    Any ideas/suggestions?

    One is glad to be of service.

  • Yosemite 10.10.3 update will not go past blank screen on reboot

    I have a early 2008 iMac 2.8 Ghz intel Core 2 Duo running Yosemite 10.10.2. When doing the 10.10.3 update, everything is fine until after the reboot when the  apple logo disappears and I'm left frozen on a white screen. I had to restore from Time Machine backup and tried to update again with the same result. I still have not updated to 10.10.3.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Blank screen after reboot - M30-70

    Hi @ All,
    I have received 5 Lenevo M30-70's last week (1st April 2015) - all brand new in the box (with Windows 7 x64 Professional pre-installed as the OS). 
    I've successfully setup one laptop with all of our standard applications within our domain - this laptop was working fine all day on Thursday and this morning (Monday 7th).
    After I was happy that all applications we use on standard laptop builds were installed, I proceeded to connect the laptop to our domain with a personalised computer name (in the standard way, via Computer). This process required a restart.
    This is where the issue began; after the reboot, the laptop to the Windows 7 boot screen displayed for a very long time (around 30 minutes) - I knew this was an issue, as previous reboots took around 15-20 seconds at the very most. I then powered down the machine by pressing the power button (until the Power LED notification light went out).
    Now when I turn the machine back on, the screen stays completely blank (not even a post screen!). I've tried using an external HDMI monitor, to no avail. I've also tried increasing the brightness with the Fn keys, and also the Fn key to turn your monitor off (F9). I can tell the system is powered on due to the power LED being lit, and also the power button is eluminated.
    I've done the usual thing of taking the laptop battery out and booting, but that makes no difference. The only interaction I get with the laptop at this point is a 'BIOS Beep' when I plug the external power adapter into it.
    I've called the Lenenvo UK support line who immediately said that it needs a repair.. I just wanted to post this here just incase it's an easy fix, as I'm pretty sure this isn't a hardware issue.
    Any ideas? I don't want this issue to happy with the remaining laptops.
    Thanks in advance. If there is anything I've missed, please let me know.
    Thanks,
    Jake
    Solved!
    Go to Solution.

    Hi JakeBloomfield,
    Welcome to Lenovo Community Forums!
    Try, When you remove the battery Remove the ACadapter as well then hold the power button down for 15 sec.
    This should drain the motherboard.
    Reconnec the battery and AC but do not turn it on yet, Let it sit there for at least 10 mins. and try.
    If that doesn't work
    Check the AC adapter, Check the power Cable,
    If the AC adapter comes in two parts (removable power cord) Try replugging it and see if that fixes it.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Blank screen when rebooting an ibm thinkpad over ssh

    I have an ibm thinkpad t23, and when i reboot it over ssh with closed lid the screen is blank, i can't see no tty or something but the screen works, and i need to reboot it with an open lid so i can use the screen. Anyone expirienced a similar issue?, google is not really helpfull. Thanks

    In my opinion what is happening is that the backlight is just not turned on when the computer comes back up. If this compter has X on it I would recommend trying to startx as when it starts it will take over control of the backlight. Or,you could try running
    # echo 5 > /sys/class/backlight/acpi_video0/brightness
    as root. Finally xbacklight may help if you can get X running.

  • Ati 3650 Blank screen?!

    I ran Xorg - configure with a new ati 3650 and getting just a blank screen on the test and does nothing and have to restart. Happens on both the vesa and ati drivers. Any ideas? Runs fine on xp.
    thanks for any help.

    I ran Xorg - configure with a new ati 3650 and getting just a blank screen on the test and does nothing and have to restart. Happens on both the vesa and ati drivers. Any ideas? Runs fine on xp.
    thanks for any help.

  • Pavilion H8-1240t boots to a blank screen ! ?

    Every so often my 2 year old Pavilion with an AMD Radeon 7070 video card will boot to a blank screen and will continue to reboot over and over again until I pull the plug. Aside from this one snafu the PC works great !
    The way I got it to boot right today was by reseating the video card and pulling out the battery on the motherboard for a few seconds. Is this common? What exactly is causing this problem?  HP Tech offers no answers whenever I call them?
    This question was solved.
    View Solution.

    Ok thanks for you reply..... I do not think it is the video card because my original H8-1240t came with an Nividia card and I sent it bacck because I was experiancing the same problem...... Is there a new bios that I should upgrade too?
    The PC is working fine now.
    Also my other related problem is that I have been unable to boot from my DVD rom drive. This machine never seems to reconize any boot disk that I place in it even though I have tried them successfully on other PC's.
    The boot order setup screen is a bit confusing.... please explain.

  • When I try to download updates on my iPad I just get a blank screen

    I can't get updates on my iPad 2 all I get is a blank screen.

    Try rebooting your router first. Unplug it for 30 seconds and then plug it in again. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you still can't connect to the iTunes store, look here for help.
    Can't connect to the iTunes Store.
    http://support.apple.com/kb/TS1368
    And look here for more advanced troubleshooting help.
    iTunes: Advanced iTunes Store troubleshooting.
    http://support.apple.com/kb/TS3297

  • Blank screen of death after iphoto 11 freeze

    Dear iphoto users
    Last night after a deep freeze during iphoto 11 presentation my Imac is stuck in the blank screen during reboot, no way to recover it (all devices disconnected, zapped PRAM, reset PMU and so on).
    Disk seems OK after a check in Single user mode, I can even access disk content from LAN. I cannot even start from the DVD: it make some noise but the device is not recognize (booting with option key only HD is recognized as bootable device).
    Any advice? TIA

    Try the repair method from this Apple Doc: FSCK - File System Check
    To start up in single-user mode
    1. Restart the computer.
    2. Immediately after the startup sound, press and hold both the Command (⌘) and "s" keys on your keyboard. The computer will display a series of text messages, at which time you may release these keys.   When the computer has started up, it will display a command line prompt (#). The computer is now in single-user mode.
    How to Run the File System Check from the Command Line Once you have reached a command line, follow these steps to use fsck:
    1. At the prompt, type: fsck -fy (NOTE: there is a space between the k and the “-”) The fsck utility will go through five "phases" and then return information about the disk's utilization and fragmentation. Once the check is finished, if no issue is found, you should see "** The volume  appears to be OK."   If fsck alters, repairs, or fixes anything, it will display the message:
    ****** FILE SYSTEM WAS MODIFIED *****
    2 - IMPORTANT: If this message appears, repeat the "fsck -fy" command until this message no longer appears. It is not unusual for your computer to require several "passes" of fsck, because first-pass repairs may uncover additional errors. Run it until you get two consecutive times with an "OK" result. 
    3. When fsck reports that no problems were found, type: reboot  
    4. Press Return.
    If you can get into Single User Mode and run the file system check it might be able to fix the damage to the system that appears to have occurred.  Worth a try.
    OT

  • Blank screen while using a ati radeon x1300 pro graphics card

    i'm getting a blank screen at start up while using my radeon x1300 pro... dont really know whats wrong with it. the agp slot is good, i'm getting power to the card, my board is set to boot agp/pci for the video so thats good. only problem is is that i'm not sure what the model of my motherboard is to check with compatiblity. got the mb and processor from a buddy of mine. he got the mb and processor from a friends grandpa... so to make long storys short. i have no idea what my computer is made of but from what i hear ati products dont seem to get along well with msi. is there any logical reason? and if so is there anything that i have overlooked here? common problems and such. i've updated everything i could update but still no signs of life comming from my video card " and yes the card was pushed in all the way". any feed back would be appreciated.

    Example of what system spex should look like:-
    MSI P865 Platinum with 3.A bios ( MS-6728 VER 2 )
    Enermax 465 20 pin PSU +3.3V = 35A +5V = 35A +12V = 33A
    Intel P4 Northwood 3.0Ghz (No overclock) (Arctic cooling Freezer HSF unit with Coolalabs thermal metal coolant)
    512Mb Corsair XMS ddr400 memory (2x256Mb in dual mode)
    Trust Dugital Pci Sound card
    Nvidia 6800GT 256Mb memory AGP card (No overclock)
    80Gb Western Digital IDE hard disk on Primary
    LG DVD IDE optical drive on Secondary
    Jeantech Phong case (120mm in front intake and 120mm at back exhaust)
    Win 98 SE (Del modded edition)
    I am sure this will help you.
    Del

  • Blank screen on TV with MSI ATI RX300HM

    Greetings
    I got two VGA cards:
    1) RX300HM-TD128E (DDR2)
    2) RX300HM-TD128E
    On different PC's
    The two card work fine in Windows & Games
    But i didn't get any Tv-Out cable with them so i bought it separatly (7pin).
    I tested the cable on my laptop (Acer) it worked fine.
    Now i used it on the two MSI cards, i went to:
    Control panel => display ==> settings ==> advanced ==> display
    I saw that the On/Off icon near the TV turned RED i click on it and click Apply then ok
    I looked at my TV there is nothing just blank screen
    So what seems to be the problem???
    Note:
    PC specification:
    Intel 3.0GHz / 2mb
    1.0GB DDR2
    MSI board 915G
    TV:
    Toshiba Bomba 29"
    Cable:
    7pin to Composite
    Thanks in advance

    U need to press the connector in real firm.
    Whenever I put my tv-out cable in, it will allways tell me that it detects a TV-out device, but will never work 1st time, only after wiggleing the connector a bit...

  • MSI K8N TV tuner card gives blank screen?

    Now besides other problems, My TV tuner card, that has and still does , run perfectly normal in every other board I have. Abit KV8, KV8-Pro, and NF7S, gives me black blank screen after watching it for more than 5 minutes. I have never had any such problems before. I have read all support at Hauppage and found no mention of this problem.
    When I take it out of this board and put it into another machine, it works perfect.
    Help please.
    MSI K8N Neo MS-7030
    1.4 Bios
    Radeon 9800
    Corsair 3200XL and tried Muchkin Special222
    Maxtor Diamond Plus
    Hauppage TV Tuner Card
    Win XP-Pro
    All normal updates etc, graphics drivers, DX9c
    Never had this many problems with a Mobo since using cheapo Elite MB.

    I have been seeing some amazing video using my msi TV-Tuner card (older card) and HDTV S-video inputs from my digital HDTV cable box.  I understand what SteveK is saying about how S-video is not capable of displaying 1080i, but dang it looks awesome using dscaler.  I did some searching and this guys says:
    A better solution is S-video. Almost all players have s-video output. S-video looks much better than composite video, and only slightly inferior to component video. Hook an s-video cable from the player to the display (or to an A/V receiver that can switch s-video). The round, 4-pin connectors may be labelled Y/C, s-video, or S-VHS.
    Link found here:  http://www.home-theater-faq.com/whats_the_difference_between_composite_s-video_component_and_rgb_video.htm
    Anyway I found some similar links that said about the same.  In any case, if anyone wants to play with the HDTV viewing using dscaler and an HDTV s-video connection, it might be of interest.

  • My MSI Board and ATI Cards

    I have been looking into upgrading my Video Card and I am very much looking at one of the higher-end ATI Radeaon cards. But I also hear some complaints concerning my board and the ATI cards, with respect to the AGP slot and the whole 4x/8x issue. Can somone tell me what ATI board, if any, will work with my board with no issues?
    Or am I being forced t ostay ith GeForce Boards?
    I currently have the 1.80 BIOS for my board.
    Thanks

    Quote
    Official statement from MSI :
    KT4 Ultra was tested OK with ATI Radeon 9700 in MSI lab.
    Some applications incorrectly detected the card as AGP2x. (refer to [1] knowing that this board only supports AGP4x and AGP8x). ATI addresses this issue here. Other tools like PowerStrip correctly shown AGP8x.
    Detail discussions were taken place here. The current workaround is :
    * do not install or uninstall any VIA AGP drivers, including those in VIA 4-in-1 drivers.
    Thanks to everyone contributed to the KT4 vs Radeon 9700 thread.
    We assume Radeon 9700 Pro, 9700, 9500 Pro and 9500 should work flawlessly with KT4 Ultra as virtually no complain report against these products at the moment.
    I saw this in the Forum Troubleshooting FAQ. I was Planning on getting a 9700 PRO or later card. Has anynone had any issues with that card?

  • Kms, ati, compiz = blank screen or segfault on xorg

    Hello.
    I seem to have never ending trouble with this combination of packages.
    I have two kernels installed right now: 2.6.30 and 2.6.31.
    2.6.30 is my main kernel now. I recompiled it and changed some wireless configuration to work with my card. Otherwise stock stuff.
    2.6.31 is pure repository kernel.
    When 2.6.31 came out, I tried using KMS. It worked, but compiz was giving me blank screen. With compiz off I all worked, but performance dropped from 1700 fps to 400 fps in glxgears. I disabled KMS for this reason.
    2.6.30 does not have KMS enabled, worked fine.
    Today I upgraded these packages:
    upgraded libdrm (2.4.16-1 -> 2.4.17-2)
    upgraded libgl (7.6-2 -> 7.6.1-1)
    upgraded ati-dri (7.6-2 -> 7.6.1-1)
    upgraded mesa (7.6-2 -> 7.6.1-1)
    upgraded xf86-video-ati (6.12.99.git20091014-1 -> 6.12.4-2)
    After that, I could not log into my system. I got to GDM, but after entering password, my system froze. I was able to log in via SSH, so just graphics froze. MY search revealed segfault on Xorg.
    With 2.6.31 kernel and KMS off it behaves the same. With KMS on, there is no segfault, but I get blank screen with compiz + performance hit.
    For now I reverted back to previous versions of packages, but I'd like to get this sorted out.

    Here is the dmesg with errors.
    Can someone point me which way to look ?
    Linux version 2.6.32.3-ARCHc (raqua@Phenom) (gcc version 4.4.2 20091208 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 7 20:29:58 CET 2010
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
    BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
    BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
    BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
    BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
    DMI present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-EFFFF uncachable
    F0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000000 mask FFFF80000000 write-back
    1 disabled
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000007ffa0000 (usable)
    modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
    modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS)
    modified: 000000007fff0000 - 0000000080000000 (reserved)
    modified: 00000000fec00000 - 00000000fec01000 (reserved)
    modified: 00000000fee00000 - 00000000fef00000 (reserved)
    modified: 00000000ff700000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 10000-15000
    RAMDISK: 7fe68000 - 7ff8f5d2
    Allocated new RAMDISK: 00100000 - 002275d2
    Move RAMDISK from 000000007fe68000 - 000000007ff8f5d1 to 00100000 - 002275d1
    ACPI: RSDP 000fa720 00014 (v00 ACPIAM)
    ACPI: RSDT 7ffa0000 00044 (v01 050509 RSDT1955 20090505 MSFT 00000097)
    ACPI: FACP 7ffa0200 00084 (v01 050509 FACP1955 20090505 MSFT 00000097)
    ACPI: DSDT 7ffa0450 08824 (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
    ACPI: FACS 7ffae000 00040
    ACPI: APIC 7ffa0390 00080 (v01 050509 APIC1955 20090505 MSFT 00000097)
    ACPI: MCFG 7ffa0410 0003C (v01 050509 OEMMCFG 20090505 MSFT 00000097)
    ACPI: OEMB 7ffae040 00073 (v01 050509 OEMB1955 20090505 MSFT 00000097)
    ACPI: HPET 7ffaa450 00038 (v01 050509 OEMHPET0 20090505 MSFT 00000097)
    ACPI: INFO 7ffae0c0 00124 (v01 050509 AMDINFO 20090505 MSFT 00000097)
    ACPI: NVHD 7ffae1f0 00284 (v01 050509 NVHDCP 20090505 MSFT 00000097)
    ACPI: SSDT 7ffaa490 00672 (v01 A M I POWERNOW 00000001 AMD 00000001)
    ACPI: Local APIC address 0xfee00000
    1159MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    node 0 low ram: 00000000 - 377fe000
    node 0 bootmap 00011000 - 00017f00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0001000000 - 0001525f44] TEXT DATA BSS ==> [0001000000 - 0001525f44]
    #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #5 [0001526000 - 000152c0db] BRK ==> [0001526000 - 000152c0db]
    #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
    #7 [0000100000 - 00002275d2] NEW RAMDISK ==> [0000100000 - 00002275d2]
    #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
    found SMP MP-table at [c00ff780] ff780
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0007ffa0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007ffa0
    On node 0 totalpages: 524079
    free_area_init_node: node 0, pgdat c13d3c00, node_mem_map c152e200
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3951 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 2320 pages used for memmap
    HighMem zone: 294546 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x2008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10de8201 base: 0xfed00000
    SMP: Allowing 4 CPUs, 1 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
    Booting paravirtualized kernel on bare hardware
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c2800000 s34616 r0 d22728 u1048576
    pcpu-alloc: s34616 r0 d22728 u1048576 alloc=1*4194304
    pcpu-alloc: [0] 0 1 2 3
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519983
    Kernel command line: root=/dev/disk/by-uuid/61784892-7568-4816-b930-99a4dcb7a571 ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    Initializing HighMem for node 0 (000377fe:0007ffa0)
    Memory: 2071292k/2096768k available (2773k kernel code, 23952k reserved, 1176k data, 408k init, 1187464k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc13dc000 - 0xc1442000 ( 408 kB)
    .data : 0xc12b5576 - 0xc13db6a8 (1176 kB)
    .text : 0xc1000000 - 0xc12b5576 (2773 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Fast TSC calibration using PIT
    Detected 2799.715 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5601.73 BogoMIPS (lpj=9332383)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    using C1E aware idle routine
    Performance Events: AMD PMU driver.
    ... version: 0
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 00007fffffffffff
    ... fixed-purpose events: 0
    ... event mask: 000000000000000f
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20090903
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 5602.39 BogoMIPS (lpj=9333424)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: AMD Phenom(tm) II X3 720 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Booting processor 2 APIC 0x2 ip 0x6000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 5602.37 BogoMIPS (lpj=9333398)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 2
    CPU2: AMD Phenom(tm) II X3 720 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    Brought up 3 CPUs
    Total of 3 processors activated (16806.50 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-2 level MC
    groups: 0 1 2
    CPU1 attaching sched-domain:
    domain 0: span 0-2 level MC
    groups: 1 2 0
    CPU2 attaching sched-domain:
    domain 0: span 0-2 level MC
    groups: 2 0 1
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
    PCI: Using configuration type 1 for base access
    PCI: Using configuration type 1 for extended access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Executed 1 blocks of module-level executable AML code
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI Warning: Incorrect checksum in table [OEMB] - C2, should be B9 (20090903/tbutils-314)
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff]
    pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f]
    pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
    pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
    pci 0000:00:01.1: PME# supported from D3hot D3cold
    pci 0000:00:01.1: PME# disabled
    pci 0000:00:01.3: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
    pci 0000:00:02.0: reg 10 32bit mmio: [0xfde7f000-0xfde7ffff]
    pci 0000:00:02.0: supports D1 D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:02.1: reg 10 32bit mmio: [0xfde7ec00-0xfde7ecff]
    pci 0000:00:02.1: supports D1 D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    pci 0000:00:04.0: reg 10 32bit mmio: [0xfde7d000-0xfde7dfff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: reg 10 32bit mmio: [0xfde7e800-0xfde7e8ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
    pci 0000:00:07.0: reg 10 32bit mmio: [0xfde78000-0xfde7bfff]
    pci 0000:00:07.0: PME# supported from D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487]
    pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403]
    pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087]
    pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003]
    pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f]
    pci 0000:00:09.0: reg 24 32bit mmio: [0xfde76000-0xfde77fff]
    pci 0000:00:0a.0: reg 10 32bit mmio: [0xfde7c000-0xfde7cfff]
    pci 0000:00:0a.0: reg 14 io port: [0xc880-0xc887]
    pci 0000:00:0a.0: reg 18 32bit mmio: [0xfde7e400-0xfde7e4ff]
    pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfde7e000-0xfde7e00f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:12.0: PME# disabled
    pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:13.0: PME# disabled
    pci 0000:00:08.0: transparent bridge
    pci 0000:02:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff]
    pci 0000:02:00.0: reg 20 io port: [0xe000-0xe0ff]
    pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfdfc0000-0xfdfdffff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfe0000-0xfdfeffff]
    pci 0000:02:00.1: supports D1 D2
    pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
    pci 0000:00:10.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
    pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
    ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
    ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
    ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
    ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
    ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
    ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
    ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *9
    ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
    ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:06: ioport range 0x4d0-0x4d1 has been reserved
    system 00:06: ioport range 0x800-0x80f has been reserved
    system 00:06: ioport range 0x2000-0x207f has been reserved
    system 00:06: ioport range 0x2080-0x20ff has been reserved
    system 00:06: ioport range 0x2400-0x247f has been reserved
    system 00:06: ioport range 0x2480-0x24ff has been reserved
    system 00:06: ioport range 0x2800-0x287f has been reserved
    system 00:06: ioport range 0x2880-0x28ff has been reserved
    system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved
    system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
    system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
    system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0a: ioport range 0xa00-0xa0f has been reserved
    system 00:0a: ioport range 0xa10-0xa1f has been reserved
    system 00:0a: ioport range 0xa20-0xa2f has been reserved
    system 00:0a: ioport range 0xa30-0xa3f has been reserved
    system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0c: iomem range 0x0-0x9ffff could not be reserved
    system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
    system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
    system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
    system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
    pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:08.0: IO window: disabled
    pci 0000:00:08.0: MEM window: disabled
    pci 0000:00:08.0: PREFETCH window: disabled
    pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:10.0: IO window: 0xe000-0xefff
    pci 0000:00:10.0: MEM window: 0xfdf00000-0xfdffffff
    pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:12.0: IO window: disabled
    pci 0000:00:12.0: MEM window: disabled
    pci 0000:00:12.0: PREFETCH window: disabled
    pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:13.0: IO window: disabled
    pci 0000:00:13.0: MEM window: disabled
    pci 0000:00:13.0: PREFETCH window: disabled
    pci 0000:00:08.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
    pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:10.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
    pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:12.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
    pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:13.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 3 io: [0x00-0xffff]
    pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
    pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
    pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff]
    pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    pci 0000:00:08.0: Enabling HT MSI Mapping
    pci 0000:00:09.0: Enabling HT MSI Mapping
    pci 0000:00:0a.0: Enabling HT MSI Mapping
    pci 0000:02:00.0: Boot video device
    Unpacking initramfs...
    Freeing initrd memory: 1181k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1263882773.466:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1730
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pcieport 0000:00:10.0: irq 24 for MSI/MSI-X
    pcieport 0000:00:10.0: setting latency timer to 64
    pcieport 0000:00:12.0: irq 25 for MSI/MSI-X
    pcieport 0000:00:12.0: setting latency timer to 64
    pcieport 0000:00:13.0: irq 26 for MSI/MSI-X
    pcieport 0000:00:13.0: setting latency timer to 64
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 408k freed
    Linux agpgart interface v0.103
    [drm] Initialized drm 1.1.0 20060810
    [drm] radeon defaulting to userspace modesetting.
    pci 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:02:00.0: setting latency timer to 64
    [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:06.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
    pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
    pata_acpi 0000:00:09.0: setting latency timer to 64
    pata_acpi 0000:00:09.0: PCI INT A disabled
    ahci 0000:00:09.0: version 3.0
    ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
    ahci 0000:00:09.0: irq 27 for MSI/MSI-X
    ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
    ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
    ahci 0000:00:09.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76100 irq 27
    ata2: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76180 irq 27
    ata3: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76200 irq 27
    ata4: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76280 irq 27
    ata5: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76300 irq 27
    ata6: SATA max UDMA/133 abar m8192@0xfde76000 port 0xfde76380 irq 27
    pata_amd 0000:00:06.0: version 0.4.1
    pata_amd 0000:00:06.0: setting latency timer to 64
    scsi6 : pata_amd
    scsi7 : pata_amd
    ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    ata7.00: ATAPI: PLEXTOR DVDR PX-820A, 1.00, max UDMA/66
    ata7.01: ATA-7: ST3120814A, 3.AAD, max UDMA/100
    ata7.01: 234441648 sectors, multi 16: LBA48
    ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c60000) ACPI=0x1f01f (30:20:0x15)
    ata7: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc5c60000) ACPI=0x3f01f (30:20:0x15)
    ata7.00: configured for UDMA/66
    ata7.01: configured for UDMA/100
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: ST3320620NS, 3.AEK, max UDMA/133
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5
    scsi 6:0:0:0: CD-ROM PLEXTOR DVDR PX-820A 1.00 PQ: 0 ANSI: 5
    scsi 6:0:1:0: Direct-Access ATA ST3120814A 3.AA PQ: 0 ANSI: 5
    ata8: port disabled. ignoring.
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 6:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:
    sd 6:0:1:0: [sdb] Write Protect is off
    sd 6:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 6:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1
    sd 6:0:1:0: [sdb] Attached SCSI disk
    sda1 sda2 sda3 sda4 < sda5 sda6 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 6:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda1): INFO: recovery required on readonly filesystem
    EXT4-fs (sda1): write access will be enabled during recovery
    EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with ordered data mode
    Driver 'rtc_cmos' needs updating - please use bus_type methods
    rtc_cmos 00:08: RTC can wake from S4
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 146
    fuse init (API version 7.13)
    processor LNXCPU:00: registered as cooling_device0
    processor LNXCPU:01: registered as cooling_device1
    processor LNXCPU:02: registered as cooling_device2
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 6:0:0:0: Attached scsi generic sg1 type 5
    sd 6:0:1:0: Attached scsi generic sg2 type 0
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (30 C)
    ACPI: WMI: Mapper loaded
    powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor processors (3 cpu cores) (version 2.20.00)
    powernow-k8: 0 : pstate 0 (2800 MHz)
    powernow-k8: 1 : pstate 1 (2100 MHz)
    powernow-k8: 2 : pstate 2 (1600 MHz)
    powernow-k8: 3 : pstate 3 (800 MHz)
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
    forcedeth 0000:00:0a.0: setting latency timer to 64
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
    vboxdrv: counter framework which can generate NMIs is active. You have to prevent
    vboxdrv: the usage of hardware performance counters by
    vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
    vboxdrv: Found 3 processor cores.
    vboxdrv: fAsync=0 offMin=0x493 offMax=0x1272
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.0.10 (interface 0x000e0001).
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:11:15:b4:e5
    forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt lnktim msi desc-v3
    i2c i2c-0: nForce2 SMBus adapter at 0x2d00
    ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f]
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    nForce2_smbus 0000:00:01.1: Error probing SMB2.
    ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
    ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:02.1: setting latency timer to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:02.1: irq 21, io mem 0xfde7ec00
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    HDA Intel 0000:00:07.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
    HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
    HDA Intel 0000:00:07.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [UB12] enabled at IRQ 23
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 23, io mem 0xfde7e800
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
    ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
    ohci_hcd 0000:00:02.0: setting latency timer to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:02.0: irq 22, io mem 0xfde7f000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:04.0: irq 21, io mem 0xfde7d000
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    usb 2-2: new high speed USB device using ehci_hcd and address 2
    usb 2-2: configuration #1 chosen from 1 choice
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    cfg80211: Calling CRDA to update world regulatory domain
    usb 2-3: configuration #1 chosen from 1 choice
    hub 2-3:1.0: USB hub found
    hub 2-3:1.0: 4 ports detected
    Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
    usb 2-2: reset high speed USB device using ehci_hcd and address 2
    cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    phy0: Selected rate control algorithm 'pid'
    zd1211rw 2-2:1.0: phy0
    usbcore: registered new interface driver zd1211rw
    usb 3-3: new low speed USB device using ohci_hcd and address 2
    usb 3-3: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: HID 04d9:1203 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input4
    generic-usb 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:02.0-3/input0
    input: HID 04d9:1203 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input5
    generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:02.0-3/input1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    usb 2-3.1: new low speed USB device using ehci_hcd and address 4
    usb 2-3.1: configuration #1 chosen from 1 choice
    input: Genius NetScroll + Traveler as /devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3.1/2-3.1:1.0/input/input6
    generic-usb 0003:0458:002E.0003: input,hidraw2: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:04.1-3.1/input0
    usb 2-3.4: new high speed USB device using ehci_hcd and address 5
    usb 2-3.4: configuration #1 chosen from 1 choice
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
    input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:04.1/usb2/2-3/2-3.4/2-3.4:1.0/input/input7
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    usbcore: registered new interface driver snd-usb-audio
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
    nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
    sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
    ClusterIP Version 0.8 loaded successfully
    xt_time: kernel timezone is +0100
    u32 classifier
    input device check on
    Actions configured
    it87: Found IT8718F chip at 0xa10, revision 4
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    [drm] Setting GART location based on new memory map
    [drm] Loading R500 Microcode
    platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
    [drm] Num pipes: 1
    [drm] writeback test succeeded in 1 usecs
    forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
    eth0: no link during initialization.
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    usb 2-2: firmware: requesting zd1211/zd1211b_ub
    usb 2-2: firmware: requesting zd1211/zd1211b_uphr
    zd1211rw 2-2:1.0: firmware version 4725
    zd1211rw 2-2:1.0: zd1211b chip 0586:3410 v4810 high 00-19-cb AL2230_RF pa0 g--NS
    cfg80211: Calling CRDA for country: DE
    cfg80211: Regulatory domain changed to country: DE
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
    CPU0 attaching NULL sched-domain.
    CPU1 attaching NULL sched-domain.
    CPU2 attaching NULL sched-domain.
    BUG: unable to handle kernel paging request at 96829001
    IP: [<c10d8831>] kmem_cache_alloc+0x51/0x150
    *pde = 00000000
    Oops: 0000 [#1] PREEMPT SMP
    last sysfs file: /sys/devices/system/cpu/sched_mc_power_savings
    Modules linked in: ipv6 it87 hwmon_vid cls_u32 sch_htb sch_ingress sch_sfq xt_time xt_connlimit xt_realm iptable_raw xt_hashlimit xt_comment xt_owner xt_recent xt_iprange xt_policy xt_multiport ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle nfnetlink iptable_filter ip_tables x_tables cpufreq_ondemand snd_usb_audio uvcvideo snd_usb_lib videodev v4l1_compat snd_rawmidi usbhid hid arc4 ecb zd1211rw mac80211 cfg80211 rfkill ohci_hcd snd_hda_codec_nvhdmi snd_hda_codec_via fan battery snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_hda_intel ehci_hcd snd_seq snd_seq_device snd_pcm_oss usbcore snd_hda_codec snd_hwdep snd_mixer_oss evdev i2c_nforce2 snd_pcm ac snd_timer button vboxdrv psmouse forcedeth snd soundcore snd_page_alloc video output powernow_k8 serio_raw wmi freq_table thermal pcspkr sg processor fuse rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod floppy pata_amd ahci pata_acpi ata_generic libata scsi_mod radeon ttm drm_kms_helper drm agpgart i2c_algo_bit i2c_core
    Pid: 2312, comm: preload Not tainted (2.6.32.3-ARCHc #1) GF8100VM-M5
    EIP: 0060:[<c10d8831>] EFLAGS: 00010082 CPU: 1
    EIP is at kmem_cache_alloc+0x51/0x150
    EAX: c2905348 EBX: 96829001 ECX: c1056988 EDX: 00000000
    ESI: c13ade98 EDI: 00000202 EBP: 000000d0 ESP: f64efe94
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    Process preload (pid: 2312, ti=f64ee000 task=f69e5c20 task.ti=f64ee000)
    Stack:
    f61ca380 f64dabf8 000000d0 00000040 bf9f6000 f63f5c20 fffffff4 f62ccd4c
    <0> 01200011 c1056988 c116bc4f f69636c0 f6963818 c1029e31 f29bfa10 00000000
    <0> c103cca6 f29bf9b8 00000202 f61ca380 f29bfa04 c13b7540 00000030 f69636f4
    Call Trace:
    [<c1056988>] ? alloc_pid+0x18/0x400
    [<c116bc4f>] ? cpumask_any_but+0x1f/0x30
    [<c1029e31>] ? flush_tlb_mm+0x31/0x90
    [<c103cca6>] ? dup_mm+0x2f6/0x450
    [<c103d561>] ? copy_process+0x701/0x1050
    [<c103df2a>] ? do_fork+0x7a/0x3c0
    [<c1025b92>] ? do_page_fault+0x102/0x300
    [<c1002133>] ? sys_clone+0x33/0x40
    [<c10039f3>] ? sysenter_do_call+0x12/0x28
    Code: 9c 58 66 66 66 90 89 c7 fa 66 66 90 66 90 64 a1 10 ba 43 c1 8b 84 86 84 00 00 00 8b 50 10 89 54 24 0c 8b 18 85 db 74 55 8b 50 0c <8b> 14 93 89 10 89 f8 50 9d 66 66 66 90 8b 44 24 08 85 db 0f 95
    EIP: [<c10d8831>] kmem_cache_alloc+0x51/0x150 SS:ESP 0068:f64efe94
    CR2: 0000000096829001
    ---[ end trace 17bfbcf0445b31cb ]---
    BUG: unable to handle kernel paging request at 96829001
    IP: [<c10d9237>] __kmalloc+0x77/0x1e0
    *pde = 00000000
    Oops: 0000 [#2] PREEMPT SMP
    last sysfs file: /sys/devices/system/cpu/sched_mc_power_savings
    Modules linked in: ipv6 it87 hwmon_vid cls_u32 sch_htb sch_ingress sch_sfq xt_time xt_connlimit xt_realm iptable_raw xt_hashlimit xt_comment xt_owner xt_recent xt_iprange xt_policy xt_multiport ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle nfnetlink iptable_filter ip_tables x_tables cpufreq_ondemand snd_usb_audio uvcvideo snd_usb_lib videodev v4l1_compat snd_rawmidi usbhid hid arc4 ecb zd1211rw mac80211 cfg80211 rfkill ohci_hcd snd_hda_codec_nvhdmi snd_hda_codec_via fan battery snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_hda_intel ehci_hcd snd_seq snd_seq_device snd_pcm_oss usbcore snd_hda_codec snd_hwdep snd_mixer_oss evdev i2c_nforce2 snd_pcm ac snd_timer button vboxdrv psmouse forcedeth snd soundcore snd_page_alloc video output powernow_k8 serio_raw wmi freq_table thermal pcspkr sg processor fuse rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod floppy pata_amd ahci pata_acpi ata_generic libata scsi_mod radeon ttm drm_kms_helper drm agpgart i2c_algo_bit i2c_core
    Pid: 2466, comm: sched-powersave Tainted: G D (2.6.32.3-ARCHc #1) GF8100VM-M5
    EIP: 0060:[<c10d9237>] EFLAGS: 00010082 CPU: 1
    EIP is at __kmalloc+0x77/0x1e0
    EAX: c2905348 EBX: 96829001 ECX: c1034331 EDX: 00000000
    ESI: c13ade98 EDI: 00000202 EBP: 000080d0 ESP: f2b79e4c
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    Process sched-powersave (pid: 2466, ti=f2b78000 task=f6375c20 task.ti=f2b78000)
    Stack:
    00000008 00000005 0000002c 000080d0 00000040 00000008 00000000 00000000
    <0> f2b79e98 c1034331 f2b79eb8 00000020 c134095f 00000000 00000000 f6413c00
    <0> f2b79edc c1441260 c1441260 00000002 f2b79ed8 f6375c20 00000000 00000001
    Call Trace:
    [<c1034331>] ? register_sched_domain_sysctl+0x101/0x3d0
    [<c10360e0>] ? default_wake_function+0x0/0x10
    [<c1039c00>] ? partition_sched_domains+0x190/0x2e0
    [<c1039c2e>] ? partition_sched_domains+0x1be/0x2e0
    [<c1039c58>] ? partition_sched_domains+0x1e8/0x2e0
    [<c12b2ebc>] ? __mutex_lock_slowpath+0x1ec/0x2c0
    [<c1039dfa>] ? sched_power_savings_store+0x6a/0x90
    [<c1039e20>] ? sched_mc_power_savings_store+0x0/0x10
    [<c11f4d79>] ? sysdev_class_store+0x29/0x40
    [<c11314a9>] ? sysfs_write_file+0x99/0x100
    [<c1131410>] ? sysfs_write_file+0x0/0x100
    [<c10df610>] ? vfs_write+0xa0/0x190
    [<c10df7c1>] ? sys_write+0x41/0x70
    [<c10039f3>] ? sysenter_do_call+0x12/0x28
    Code: 66 90 89 c7 fa 66 66 90 66 90 64 a1 10 ba 43 c1 8b 84 86 84 00 00 00 8b 50 10 89 54 24 10 8b 18 85 db 0f 84 25 01 00 00 8b 50 0c <8b> 14 93 89 10 89 f8 50 9d 66 66 66 90 8b 54 24 0c 85 db 0f 95
    EIP: [<c10d9237>] __kmalloc+0x77/0x1e0 SS:ESP 0068:f2b79e4c
    CR2: 0000000096829001
    ---[ end trace 17bfbcf0445b31cc ]---
    zd1211rw 2-2:1.0: error ioread32(CR_REG1): -110
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    BUG: unable to handle kernel paging request at 96829001
    IP: [<c10d8831>] kmem_cache_alloc+0x51/0x150
    *pde = 00000000
    Oops: 0000 [#3] PREEMPT SMP
    last sysfs file: /sys/devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/ieee80211/phy0/rfkill0/state
    Modules linked in: ipv6 it87 hwmon_vid cls_u32 sch_htb sch_ingress sch_sfq xt_time xt_connlimit xt_realm iptable_raw xt_hashlimit xt_comment xt_owner xt_recent xt_iprange xt_policy xt_multiport ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle nfnetlink iptable_filter ip_tables x_tables cpufreq_ondemand snd_usb_audio uvcvideo snd_usb_lib videodev v4l1_compat snd_rawmidi usbhid hid arc4 ecb zd1211rw mac80211 cfg80211 rfkill ohci_hcd snd_hda_codec_nvhdmi snd_hda_codec_via fan battery snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_hda_intel ehci_hcd snd_seq snd_seq_device snd_pcm_oss usbcore snd_hda_codec snd_hwdep snd_mixer_oss evdev i2c_nforce2 snd_pcm ac snd_timer button vboxdrv psmouse forcedeth snd soundcore snd_page_alloc video output powernow_k8 serio_raw wmi freq_table thermal pcspkr sg processor fuse rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod floppy pata_amd ahci pata_acpi ata_generic libata scsi_mod radeon ttm drm_kms_helper drm agpgart i2c_algo_bit i2c_core
    Pid: 2267, comm: NetworkManager Tainted: G D (2.6.32.3-ARCHc #1) GF8100VM-M5
    EIP: 0060:[<c10d8831>] EFLAGS: 00010082 CPU: 1
    EIP is at kmem_cache_alloc+0x51/0x150
    EAX: c2905348 EBX: 96829001 ECX: c1240ddc EDX: 00000000
    ESI: c13ade98 EDI: 00000202 EBP: 000080d0 ESP: f6125c6c
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    Process NetworkManager (pid: 2267, ti=f6124000 task=f69e10c0 task.ti=f6124000)
    Stack:
    00100100 00200200 000080d0 00000040 00000019 f29e4e00 f655eb40 f29e4e00
    <0> f7079e00 c1240ddc f5f1ea90 c2908730 ffffffff ffffffff c13cf8a0 f29e4e00
    <0> f655eb40 c12316c0 00000000 c1231f25 c12316c0 00000000 c12b2ebc c13cf8a8
    Call Trace:
    [<c1240ddc>] ? netlink_dump_start+0x1c/0x1e0
    [<c12316c0>] ? rtnl_dump_ifinfo+0x0/0xa0
    [<c1231f25>] ? rtnetlink_rcv_msg+0xb5/0x1f0
    [<c12316c0>] ? rtnl_dump_ifinfo+0x0/0xa0
    [<c12b2ebc>] ? __mutex_lock_slowpath+0x1ec/0x2c0
    [<c1231e70>] ? rtnetlink_rcv_msg+0x0/0x1f0
    [<c1241d3e>] ? netlink_rcv_skb+0x7e/0xa0
    [<c1231e64>] ? rtnetlink_rcv+0x14/0x20
    [<c12419ff>] ? netlink_unicast+0x24f/0x290
    [<c12421fa>] ? netlink_sendmsg+0x1ca/0x2d0
    [<c1217a01>] ? sock_sendmsg+0x111/0x130
    [<c10594b0>] ? autoremove_wake_function+0x0/0x40
    [<c10594b0>] ? autoremove_wake_function+0x0/0x40
    [<c1294518>] ? unix_stream_recvmsg+0x218/0x540
    [<c1217b83>] ? sys_sendmsg+0x163/0x260
    [<c1218e5c>] ? sys_recvmsg+0x17c/0x210
    [<c10594b0>] ? autoremove_wake_function+0x0/0x40
    [<c10aa670>] ? filemap_fault+0x0/0x410
    [<c10630e0>] ? ktime_get_ts+0xd0/0x100
    [<c121964c>] ? sys_socketcall+0xcc/0x2a0
    [<c106333d>] ? do_gettimeofday+0xd/0x30
    [<c1043a90>] ? sys_gettimeofday+0x30/0x80
    [<c10039f3>] ? sysenter_do_call+0x12/0x28
    Code: 9c 58 66 66 66 90 89 c7 fa 66 66 90 66 90 64 a1 10 ba 43 c1 8b 84 86 84 00 00 00 8b 50 10 89 54 24 0c 8b 18 85 db 74 55 8b 50 0c <8b> 14 93 89 10 89 f8 50 9d 66 66 66 90 8b 44 24 08 85 db 0f 95
    EIP: [<c10d8831>] kmem_cache_alloc+0x51/0x150 SS:ESP 0068:f6125c6c
    CR2: 0000000096829001
    ---[ end trace 17bfbcf0445b31cd ]---
    BUG: unable to handle kernel paging request at 96829001
    IP: [<c10d9237>] __kmalloc+0x77/0x1e0
    *pde = 00000000
    Oops: 0000 [#4] PREEMPT SMP
    last sysfs file: /sys/devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/ieee80211/phy0/rfkill0/state
    Modules linked in: ipv6 it87 hwmon_vid cls_u32 sch_htb sch_ingress sch_sfq xt_time xt_connlimit xt_realm iptable_raw xt_hashlimit xt_comment xt_owner xt_recent xt_iprange xt_policy xt_multiport ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle nfnetlink iptable_filter ip_tables x_tables cpufreq_ondemand snd_usb_audio uvcvideo snd_usb_lib videodev v4l1_compat snd_rawmidi usbhid hid arc4 ecb zd1211rw mac80211 cfg80211 rfkill ohci_hcd snd_hda_codec_nvhdmi snd_hda_codec_via fan battery snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_hda_intel ehci_hcd snd_seq snd_seq_device snd_pcm_oss usbcore snd_hda_codec snd_hwdep snd_mixer_oss evdev i2c_nforce2 snd_pcm ac snd_timer button vboxdrv psmouse forcedeth snd soundcore snd_page_alloc video output powernow_k8 serio_raw wmi freq_table thermal pcspkr sg processor fuse rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod floppy pata_amd ahci pata_acpi ata_generic libata scsi_mod radeon ttm drm_kms_helper drm agpgart i2c_algo_bit i2c_core
    Pid: 2487, comm: gdm-session-wor Tainted: G D (2.6.32.3-ARCHc #1) GF8100VM-M5
    EIP: 0060:[<c10d9237>] EFLAGS: 00010082 CPU: 1
    EIP is at __kmalloc+0x77/0x1e0
    EAX: c2905348 EBX: 96829001 ECX: f84a0aca EDX: 00000000
    ESI: c13ade98 EDI: 00000206 EBP: 00008050 ESP: f2bd9b08
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    Process gdm-session-wor (pid: 2487, ti=f2bd8000 task=f63f7110 task.ti=f2bd8000)
    Stack:
    f6828000 00000000 00000038 00008050 00000040 00000000 f20af810 f20af898
    <0> 00000000 f84a0aca f63f72bc c143c724 f63f72bc c1441260 c1441260 00000000
    <0> f20af898 00000000 00000000 f20afa5c f20af898 00000000 f84a1d66 00000000
    Call Trace:
    [<f84a0aca>] ? ext4_ext_find_extent+0x25a/0x2a0 [ext4]
    [<f84a1d66>] ? ext4_ext_get_blocks+0xe6/0x14f0 [ext4]
    [<c12b3785>] ? schedule_hrtimeout_range+0x125/0x140
    [<f84a1d3c>] ? ext4_ext_get_blocks+0xbc/0x14f0 [ext4]
    [<f8482880>] ? ext4_get_block+0x0/0x110 [ext4]
    [<c10a9dc9>] ? find_get_page+0x29/0xc0
    [<c11018cf>] ? __find_get_block_slow+0xbf/0x150
    [<c11d0a71>] ? mix_pool_bytes_extract+0x51/0x160
    [<c10b2af8>] ? activate_page+0xc8/0x110
    [<f848132a>] ? ext4_get_blocks+0x7a/0x470 [ext4]
    [<c11018cf>] ? __find_get_block_slow+0xbf/0x150
    [<c1101e89>] ? __getblk+0x29/0x350
    [<f84828f1>] ? ext4_get_block+0x71/0x110 [ext4]
    [<c110ad39>] ? do_mpage_readpage+0x1d9/0x730
    [<f8482880>] ? ext4_get_block+0x0/0x110 [ext4]
    [<c10aa32f>] ? add_to_page_cache_locked+0x7f/0xf0
    [<c110b3cb>] ? mpage_readpages+0xcb/0x100
    [<f8482880>] ? ext4_get_block+0x0/0x110 [ext4]
    [<c10f09c2>] ? __d_instantiate+0x82/0xc0
    [<c110d63a>] ? inotify_d_instantiate+0x1a/0x60
    [<c10ef6be>] ? d_rehash+0x2e/0x50
    [<f847fba0>] ? ext4_readpages+0x0/0x20 [ext4]
    [<c10b1fb9>] ? __do_page_cache_readahead+0x1a9/0x260
    [<f8482880>] ? ext4_get_block+0x0/0x110 [ext4]
    [<c10b208e>] ? ra_submit+0x1e/0x30
    [<c10b24e7>] ? page_cache_sync_readahead+0x27/0x30
    [<c10abe7e>] ? generic_file_aio_read+0x37e/0x6c0
    [<c10deb55>] ? do_sync_read+0xd5/0x120
    [<c10594b0>] ? autoremove_wake_function+0x0/0x40
    [<c11446ac>] ? security_file_permission+0xc/0x10
    [<c10dec06>] ? rw_verify_area+0x66/0xe0
    [<c10dea80>] ? do_sync_read+0x0/0x120
    [<c10df88d>] ? vfs_read+0x9d/0x190
    [<c10dfa41>] ? sys_read+0x41/0x70
    [<c10039f3>] ? sysenter_do_call+0x12/0x28
    Code: 66 90 89 c7 fa 66 66 90 66 90 64 a1 10 ba 43 c1 8b 84 86 84 00 00 00 8b 50 10 89 54 24 10 8b 18 85 db 0f 84 25 01 00 00 8b 50 0c <8b> 14 93 89 10 89 f8 50 9d 66 66 66 90 8b 54 24 0c 85 db 0f 95
    EIP: [<c10d9237>] __kmalloc+0x77/0x1e0 SS:ESP 0068:f2bd9b08
    CR2: 0000000096829001
    ---[ end trace 17bfbcf0445b31ce ]---
    [drm] Num pipes: 1
    BUG: unable to handle kernel paging request at 96829001
    IP: [<c10d8831>] kmem_cache_alloc+0x51/0x150
    *pde = 00000000
    Oops: 0000 [#5] PREEMPT SMP
    last sysfs file: /sys/devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/ieee80211/phy0/rfkill0/state
    Modules linked in: ipv6 it87 hwmon_vid cls_u32 sch_htb sch_ingress sch_sfq xt_time xt_connlimit xt_realm iptable_raw xt_hashlimit xt_comment xt_owner xt_recent xt_iprange xt_policy xt_multiport ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle nfnetlink iptable_filter ip_tables x_tables cpufreq_ondemand snd_usb_audio uvcvideo snd_usb_lib videodev v4l1_compat snd_rawmidi usbhid hid arc4 ecb zd1211rw mac80211 cfg80211 rfkill ohci_hcd snd_hda_codec_nvhdmi snd_hda_codec_via fan battery snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_hda_intel ehci_hcd snd_seq snd_seq_device snd_pcm_oss usbcore snd_hda_codec snd_hwdep snd_mixer_oss evdev i2c_nforce2 snd_pcm ac snd_timer button vboxdrv psmouse forcedeth snd soundcore snd_page_alloc video output powernow_k8 serio_raw wmi freq_table thermal pcspkr sg processor fuse rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod floppy pata_amd ahci pata_acpi ata_generic libata scsi_mod radeon ttm drm_kms_helper drm agpgart i2c_algo_bit i2c_core
    Pid: 2356, comm: console-kit-dae Tainted: G D (2.6.32.3-ARCHc #1) GF8100VM-M5
    EIP: 0060:[<c10d8831>] EFLAGS: 00010082 CPU: 1
    EIP is at kmem_cache_alloc+0x51/0x150
    EAX: c2905348 EBX: 96829001 ECX: c1056988 EDX: 00000000
    ESI: c13ade98 EDI: 00000202 EBP: 000000d0 ESP: f29dbe94
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    Process console-kit-dae (pid: 2356, ti=f29da000 task=f63f57f0 task.ti=f29da000)
    Stack:
    000000d0 c13d5004 000000d0 00000040 02000000 f63f53c0 fffffff4 f67edb04
    <0> 003d0f00 c1056988 f29dbecc c100e2c5 00000001 f63f53c0 00000006 b7448b70
    <0> 000fffff 00000051 f63f53c0 00000000 f1401ff8 c13b7540 c10024ae 00000000
    Call Trace:
    [<c1056988>] ? alloc_pid+0x18/0x400
    [<c100e2c5>] ? do_set_thread_area+0xd5/0xe0
    [<c10024ae>] ? copy_thread+0xde/0x140
    [<c103d561>] ? copy_process+0x701/0x1050
    [<c10594b0>] ? autoremove_wake_function+0x0/0x40
    [<c103df2a>] ? do_fork+0x7a/0x3c0
    [<c10df90e>] ? vfs_read+0x11e/0x190
    [<c1002133>] ? sys_clone+0x33/0x40
    [<c1003ad4>] ? syscall_call+0x7/0xb
    Code: 9c 58 66 66 66 90 89 c7 fa 66 66 90 66 90 64 a1 10 ba 43 c1 8b 84 86 84 00 00 00 8b 50 10 89 54 24 0c 8b 18 85 db 74 55 8b 50 0c <8b> 14 93 89 10 89 f8 50 9d 66 66 66 90 8b 44 24 08 85 db 0f 95
    EIP: [<c10d8831>] kmem_cache_alloc+0x51/0x150 SS:ESP 0068:f29dbe94
    CR2: 0000000096829001
    ---[ end trace 17bfbcf0445b31cf ]---

  • [SOLVED] Blank screen starting new Xorg (ATI)

    Yes, it's another blank screen problem with xorg.  Sorry. 
    After months of sticking with an older Xorg (due to problems with my ATI Radeon X1550 card and the new Xorg w/ dual head), I decided to make a jump and update to the latest Xorg and ati drivers, foregoing dual screens.  I've read you can just start Xorg without a config, which I tried, but no luck.  I just get a blank screen.  I autogenerated a config file and still get a blank screen.  Either way there's no default X cursor or xterm anywhere. 
    I've tried adding the AllowEmptyInput flag as suggested in related threads, but that doesn't help.  My .conf file and log file are listed below.  If someone could give me some suggestions to solve this, I'd appreciate it.;
    My xorg.conf.new file:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "ServerFlags"
    Option "DontZap" "false"
    Option "AllowEmptyInput" "off"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # Load "glx"
    Load "extmod"
    Load "record"
    Load "dri2"
    Load "dbe"
    Load "dri"
    Load "drm"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 380 300 # mm
    Identifier "Monitor0"
    VendorName "ACR"
    ModelName "AL1916"
    HorizSync 31.0 - 81.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "FBTexPercent" # <i>
    #Option "DepthBits" # <i>
    #Option "PCIAPERSize" # <i>
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "ColorTiling" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "RageTheatreCrystal" # <i>
    #Option "RageTheatreTunerPort" # <i>
    #Option "RageTheatreCompositePort" # <i>
    #Option "RageTheatreSVideoPort" # <i>
    #Option "TunerType" # <i>
    #Option "RageTheatreMicrocPath" # <str>
    #Option "RageTheatreMicrocType" # <str>
    #Option "ScalerWidth" # <i>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "DynamicClocks" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "ReverseDDC" # [<bool>]
    #Option "LVDSProbePLL" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "ConnectorTable" # <str>
    #Option "DefaultConnectorTable" # [<bool>]
    #Option "DefaultTMDSPLL" # [<bool>]
    #Option "TVDACLoadDetect" # [<bool>]
    #Option "ForceTVOut" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "IgnoreLidStatus" # [<bool>]
    #Option "DefaultTVDACAdj" # [<bool>]
    #Option "Int10" # [<bool>]
    #Option "EXAVSync" # [<bool>]
    #Option "ATOMTVOut" # [<bool>]
    #Option "R4xxATOM" # [<bool>]
    Identifier "Card0"
    Driver "ati"
    VendorName "ATI Technologies Inc"
    BoardName "RV505 [Radeon X1550 Series]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    My Xorg.0.log:
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
    Build Date: 18 July 2009 08:27:13PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 18:18:46 2009
    (++) Using config file: "./xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "DontZap" "false"
    (**) Option "AllowEmptyInput" "off"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (II) Loader magic: 0x7a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000f5000000
    (II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
    (WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
    IOBaseAddress: 0xb000
    Filename: SV25429.bin
    BIOS Bootup Message:
    7143.9.13.1.29.AS01
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 550000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1600
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): Skipping Component Video
    encoder: 0x15
    encoder: 0x13
    encoder: 0x16
    (II) RADEON(0): Output VGA-0 using monitor section Monitor0
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_KLDSCP_DAC2
    DFP1: INTERNAL_KLDSCP_TMDS1
    DDC reg: 0x7e50
    (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    finished output detect: 1
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    (II) RADEON(0): Output VGA-0 connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
    after xf86InitialConfiguration
    (**) RADEON(0): Display dimensions: (380, 300) mm
    (**) RADEON(0): DPI set to (85, 108)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x10000000
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
    (II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
    (II) RADEON(0): Largest offscreen area available: 1280 x 6909
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x1b80000
    (II) RADEON(0): Will use depth buffer at offset 0x21c0000
    (II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
    (II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93c5000
    (II) RADEON(0): [pci] ring handle = 0xf93c5000
    (II) RADEON(0): [pci] Ring mapped at 0xa765d000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0xf94c6000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0xb792c000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94c7000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa745d000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0xf96c7000
    (II) RADEON(0): [pci] GART Texture map mapped at 0xa57dd000
    (II) RADEON(0): [drm] register handle = 0x2ea00000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (**) Option "dpms"
    (**) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
    (II) RADEON(0): Largest offscreen area available: 1280 x 6901
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output CRT1 disable success
    Mode 1280x1024 - 1688 1066 5
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    freq: 108000000
    best_freq: 108000000
    best_feedback_div: 48
    best_ref_div: 2
    best_post_div: 6
    (II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
    (II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output DAC1 setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 enable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 376 x 301
    (**) Option "Protocol" "auto"
    (**) Option "Device" "/dev/input/mice"
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (**) Mouse0: Device: "/dev/input/mice"
    (**) Mouse0: Protocol: "auto"
    (**) Option "CorePointer"
    (**) Mouse0: always reports core events
    (**) Option "Device" "/dev/input/mice"
    (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5 6 7"
    (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
    (**) Mouse0: Buttons: 11
    (**) Mouse0: Sensitivity: 1
    (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
    (**) Mouse0: (accel) keeping acceleration scheme 1
    (**) Mouse0: (accel) filter chain progression: 2.00
    (**) Mouse0: (accel) filter stage 0: 20.00 ms
    (**) Mouse0: (accel) set acceleration profile 0
    (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    (II) Mouse0: ps2EnableDataReporting: succeeded
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "us"
    (**) Keyboard0: XkbLayout: "us"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
    (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
    (**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
    (II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
    (II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
    (II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
    (II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
    (**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
    (**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) AIGLX: Suspending AIGLX clients for VT switch
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): avivo_restore !
    Enable CRTC 0 success
    Unblank CRTC 0 success
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) ImExPS/2 Logitech Explorer Mouse: Close
    (II) UnloadModule: "evdev"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "kbd"
    (II) UnloadModule: "mouse"
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb792d000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by edenxavier (2009-07-28 22:33:44)

    Did like you said, however it didn't work.  It complained this time about not having the fbdev available.  It's not installed because I didn't think it was related.  Here's the new Xorg.log.0 file:
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
    Build Date: 18 July 2009 08:27:13PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 23:20:52 2009
    (II) Loader magic: 0x7a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default ati Device 0"
    Driver "ati"
    EndSection
    Section "Screen"
    Identifier "Builtin Default ati Screen 0"
    Device "Builtin Default ati Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default ati Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default ati Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default ati Device 0"
    (==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
    (II) VESA: driver for VESA chipsets: vesa
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (WW) Falling back to old probe method for vesa
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000f5000000
    (II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
    (WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
    IOBaseAddress: 0xb000
    Filename: SV25429.bin
    BIOS Bootup Message:
    7143.9.13.1.29.AS01
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 550000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1600
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): Skipping Component Video
    encoder: 0x15
    encoder: 0x13
    encoder: 0x16
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_KLDSCP_DAC2
    DFP1: INTERNAL_KLDSCP_TMDS1
    DDC reg: 0x7e50
    (II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using EDID range info for horizontal sync
    (II) RADEON(0): Using EDID range info for vertical refresh
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    finished output detect: 1
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
    (II) RADEON(0): Year: 2006 Week: 13
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    (II) RADEON(0): Sync: Separate Composite SyncOnGreen
    (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
    (II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: AL1916
    (II) RADEON(0): ACER
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0004727c07e4060000
    (II) RADEON(0): 0d1001030e261e782e6875a25a499f23
    (II) RADEON(0): 135054bfef00714f8180010101010101
    (II) RADEON(0): 010101010101302a009851002a403070
    (II) RADEON(0): 1300782d1100001e000000fd00384b1f
    (II) RADEON(0): 510e000a202020202020000000fc0041
    (II) RADEON(0): 4c313931360a202020202020000000fe
    (II) RADEON(0): 00414345520a202020202020202000b1
    (II) RADEON(0): EDID vendor "ACR", prod id 1916
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    (II) RADEON(0): Output VGA-0 connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
    after xf86InitialConfiguration
    (**) RADEON(0): Display dimensions: (380, 300) mm
    (**) RADEON(0): DPI set to (85, 108)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x10000000
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
    (II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
    (II) RADEON(0): Largest offscreen area available: 1280 x 6909
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x1b80000
    (II) RADEON(0): Will use depth buffer at offset 0x21c0000
    (II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
    (II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93e3000
    (II) RADEON(0): [pci] ring handle = 0xf93e3000
    (II) RADEON(0): [pci] Ring mapped at 0xb77ac000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0xf94e4000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0xb799f000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94e5000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa74dc000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0xf96e5000
    (II) RADEON(0): [pci] GART Texture map mapped at 0xa585c000
    (II) RADEON(0): [drm] register handle = 0x2ea00000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
    (II) RADEON(0): Largest offscreen area available: 1280 x 6901
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output CRT1 disable success
    Mode 1280x1024 - 1688 1066 5
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    freq: 108000000
    best_freq: 108000000
    best_feedback_div: 48
    best_ref_div: 2
    best_post_div: 6
    (II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
    (II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output DAC1 setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 enable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 376 x 301
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
    (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
    (**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
    (II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
    (II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
    (II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
    (II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
    (**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
    (**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) ImExPS/2 Logitech Explorer Mouse: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): avivo_restore !
    Enable CRTC 0 success
    Unblank CRTC 0 success
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb79a0000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by edenxavier (2009-07-28 03:31:10)

Maybe you are looking for