ATI Catalyst 13.1 - Not Good with Photoshop CS6 13.0.1

I installed Catalyst 13.1 last night.
On Windows 7 x64 and Photoshop CS6 13.0.1  I still see the GPU-based color-management issue noted in this thread:
http://forums.adobe.com/thread/1093163?tstart=0
Some workarounds: 
Configure Photoshop to Basic GPU mode and wait for a Photoshop update to potentially fix it so Normal or Advanced mode can be used again.
Uninstall Catalyst 13.1 and install 12.8 specifically (which works okay with Photoshop CS6).  After testing a bit further this is probably what I'm going to do.
There may be a problem with the reporting of the VRAM size to Photoshop.  I'm not sure what's up, but I have 2GB of VRAM on my ATI 7850, and 2GB was the full amount reported to Photoshop by Catalyst 12.8.  With Catalyst 13.1 in place, however, I see the following.  Worse yet, the number seems to vary.
Also, there seems to be a problem now with the implementation of the Windows power policy - specifically the power-down of the monitors on inactivity.  They do power-down when left idle, but then they power back up again in a few moments.
I have not found a workaround for this issue yet, save for punching the actual power buttons on the monitors.
I found no speed increase or other compelling reason to upgrade to 13.1 in any case.  I think that release must be all about gaming and nothing more.
My recommendation, at least until Adobe releases an update that works around the color black-out problem, is to avoid updating to Catalyst 13.1.
-Noel

In all seriousness, I do prefer things that work. 
For 5 years or so ATI was on top of the quality heap - long enough that I bought a 4670, 5670, and just recently a 7850 card.  However, the last 6 to 8 months have been markedly worse, and unless some kind of major turnaround happens, I am starting to think that ATI is moving down the list, making way for nVidia to dominate.  I have heard that AMD in general is having financial troubles.
In my long career in software engineering, having many PCs (and having run departments full of engineers with PCs), I have seen a number of different graphics manufacturers dominate the industry at various times...  Matrox, nVidia, ATI...  Maybe it's just nVidia's time to shine again.
Assuming you are speaking of "jumping ship" at a higher level to Apple, that thought has crossed my mind, but in all seriousness I don't think you lot have much better a time of it overall.  Reference recent Mac-only problems with Photoshop licensing/activation for example.  At the moment I enjoy the greater control the PC environment gives me over what I choose to integrate together. 
Perhaps it sounds as if "things are bad" for me, but they're not really.  For one thing, Catalyst 12.8 really does work pretty well.  My system goes for weeks between reboots and I rarely get application crashes.  Testing these drivers is something I need to do to keep abreast of problems my own software customers, who use my GPU-accelerated plug-ins, may encounter.  Fortunately with the newest Catalyst drivers I've found no problems with my own software, which uses the GPU differently than Photoshop (in these modern times, it's a certainty that no two applications use the GPU in quite the same way).
By the way, I am no fanatic - In addition to two desktop Dell workstations and one laptop Dell PC, I have in the family a Macbook, three iPads, and an AppleTV.  Like I said, I like things that work.
-Noel

Similar Messages

  • Bridge is not connunicating with Photoshop CS6

    I own Photoshops v CS3, CS5.1 and CS6 which I bought as an update.
    All versions were installed on my PC and to make moore room on my hard drive I uninstalled CS3 and CS5.
    I now find my Bridge CS6 cannot open images. I get the error message 'Windows cannot find C:/Programme Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe   The Updater in CS6 has never worked for me - I always get an error message (I did uninstall and re-install CS6 about 3 times when I purchased it but this didn't make any difference to the error messages) 

    Many thanks for your good advice. Bridge is now communicating with Photoshop - Phew!!! Thanks
    I have done as you suggested. I already had a backup copy from when I downloaded CS6 earlier in the year and I have re-installed it. Strangely enough I wasn't prompted for my previous version licence no.
    However I am still getting error messages which I thought might have been erradicated with these actions (Extension Manager 6.0.8 Update
    Installation failed. Error Code: U44M1P7) and I now find the Text Tool doesn't work!
    After re-starting my PC the TEXT Tool is now working!  There seems to be a bug in my PC!
    I have discovered that the Error Code U44M1P7 relates to Extension Manager - I have no idea what this software is - so maybe I don't need it

  • Can not edit with Photoshop CS6

    Hi Guys
    I just got Photoshop CS6 and I am working with LR 4.1 on Mac and I got this message when I try to edit my images from LR to Shop: The files could not be edited because Adobe Photoshop CS6 could not be launched
    sometimes, I have to redo this demand 2/3 times to get my images opend finally
    Please let me know
    Many thanks, Thierry

    Yes, I've had the same problem using IDCS4 on Win XP. I got MS Paint opening and I vaguely recall what I did to fix it.
    Thinking it was a memory problem I know I 'Closed' and 'Re-Opened' IDCSC4 at least once. I must have closed Photoshop and Acrobat also to free up RAM prior to doing this. I think failing that, I rebooted (maybe more than once, and to a full, dead, shut down and wait for the RAM to fully discharge for 5 minutes, as I recall). Then I just started and launched ID only, and it went away, finally. It hasn't reared it's ugly head since.

  • Could not load MMXCore Routines module because it does not work with Photoshop CS6?

    What is this - should I be concerned?
    Thanks,
    DrDisk

    Hi Joel,
    Check out this FAQ: http://forums.adobe.com/message/4221311#4221311
    regards,
    steve

  • I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

    I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

    If it's the same machine (same CPU) there should not be any need to activate.  The actiovation is tied to your CPU.
    If you run into problems, then:
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
    The platforms don't matter, but you still need file transfer that doesn't corrupt files...

  • Hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.

    hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.

    Just to assist those who might help you with this, please give the exact version of Photoshop CS6 you are running, for instance CS6 13.0.1.3.
    I had already asked for that in my previous post, but I guess you didn't quite know what I was referencing when I typed "exact version".
    Sorry, I cannot help you myself because I don't deal with that kind of 3D images, don't use Windows, and in all frankness I'm not quite following your last post.
    Also please give the exact model of your graphics card, so they can check whether it is on the list of cards tested by Adobe.
    Thank you.

  • I am not good with computers. I work on Imac 10.8. I do not use iphone or ipad. How do I save a note with 'notes?' thanks

    Hi
    I am not good with computers.
    I work on an Imac 10.8.4
    How do I save a note using "notes"?
    I do not use a, or own an iphone or an ipad.
    thanks,
    Jeannie

    It will auto-save. Open the Notes app & type. When you are done, quit Notes.
    To create a new note, click the "+" on the bottom left.

  • HT2488 Is there a way to highlight a lot of folders at the same time to replace underscore between the title words with a space? If it's possible can someone please explain in easy to follow steps for somebody not good with the mac .. Thanks

    Is there a way to replace, on a list of folders at the same time, underscore between title words on a folder with a space? If someone has the know how could they please explain in real simple to follow way for somebody not good with Mac .... Thanks

    You need a "bulk renamer" to do this.
    I personally use ABetterFinderRename, but there are cheaper and some that are free. ABFR has a free trial.
    Renamer4Mac is cheap. Check the App Store too.

  • Using Mac Mini with Photoshop CS6 and Lightroom

    Hi
    I use Photoshop CS6 and Lightroom 4 mainly as I am a photographer. It involves both programmes live and some huge PSD files kicking around. I would be interested in hearing from any one who does similar on a high end mac mini. I am thinking of getting the high end new i7 with 16g and an SSD.
    Any good ?

    While it will not deliver 'blazing fast' performance, it has tested OK with Photoshop CS6 MGE recently and it has faired decently well in some benchmark reports. Since the OP insisted Mac Mini, I think he can go for it. Also, since his work demands more 'Photo-specific' editing, I guess he should be good. Not much 3D I assume!
    Here are some references:
    http://www.pugetsystems.com/labs/articles/Adobe-Photoshop-CS6-GPU-Acceleration-161 - Look at benchmark reports (images) for Z77 chipset
    http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html - HD4000 has been tested with CS6 by Adobe
    And I haven't heard of a 'reported failure' per se yet.
    -ST

  • Kuler with photoshop CS6

    I everyone! My question is : How do I use Kuler with photoshop CS6? Because it doesn't appear where it should. Do I have to install it on my computer ? If yes where do I find it ?
    Thanks you everyone !

    OK, law "Toubon" [that means "all good" in french- but many think that it's "all bad "="Tout mauvais" ;-)]  says that all functionalities and manuals of a commercial product have to be translated in french.
    But, IMHO, it does'nt forbid to let the user insert plugins or something, that is not in the inital product he bought. Then give us the possibility to add BY OURSELVES those extensions. It would be fine.
    Thanks in advance.

  • Problem with Photoshop CS6. If I open a file using Camera RAW

    I have a new problem with Photoshop CS6.  If I open a file using Camera RAW, and process it as usual, CS6 doesn't want to save it the way it used to.  I don't know if I changed something by accident or not. 
    Here's what happens now: After opening from ACR to CS6 and completinhg all of my work, I choose "Save as..."  The save as window opens showing the file name and format.  The default format seems to be .PSD.  I use the drop down to select .jpg.  The file saves normally as a .jpg.  When I go to close the image from, I get a new prompt asking, "Save changes to Adobe Photoshop document DSC_xxxx.NEF before closing?
    I looked up at the file name in the bar above the work space and noticed that it does NOT change from "DSC_xxxx.NEF" to "DSC_xxxx.jpg" after I have saved the file as a .jpg,in my webesite  but it always used to do that.  This adds a few extra steps when closing a document and it really slows me down.
    In fact, I wouldn't swear to this, but I think it used to save to .jpg by default, without me specifying this.
    I don't see a setting in the preferences for what to use as the default file format for saving, so I don't know where to change it back.
    Any ideas?
    Thanks in advance

    You are in the wrong forum;  You actually need Photoshop forum at this link:
    <http://forums.adobe.com/community/photoshop?view=discussions>
    Hope you can repost your question at the correct link.

  • Can I use Adobe photoshop CC classroom in a book with Photoshop CS6?

    Can I use Photoshop CC classroom in a book lessons with Photoshop CS6?

    Yes, there will be some new features in CC that CS6 does not have, but 97% will be the same.

  • Trouble with Photoshop Cs6

    Having trouble with Photoshop cs6. Brushes that i have downloaded from 3rd party websites were deleted from Photoshop after months of use. We replaced all the brushes 1 by 1 but now there is an extreme lag in almost every function in photoshop that i had never experienced before. Dont know what is going wrong.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for