ATI Catalyst 8.5 Proprietary Linux Display Driver released

New ATI Catalyst™ 8.5 Proprietary Linux Display Driver was released the day before yesterday and according to release notes it has many improvements.
New Features
This release of the Catalyst™ Linux software driver introduces Mipmap Detail, Catalyst A.I., and AA Filters in the 3D ORCA page of the Catalyst™ Control Center Linux Edition.
Resolved Issues
* The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
* Support for video playback on the second head in dual head mode is now available. Further details can be found in topic number 737-26985
* Unresolved symbols in Xorg log under RHEL 4u6 32 and 64 bit no longer occur. Further details can be found in topic number 737-34284
* The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-34285
* Change VT no longer fails when kernel module is not loaded. Further details can be found in topic number 737-34286
* Switching to the virtual terminal multiple times no longer results in X displaying corruption. Further details can be found in topic number 737-34287
* Catalyst Control Center: The Preference page is now localized for all supported languages. Further details can be found in topic number 737-34275
* The Linux kernel module is no longer installed to wrong location if the Linux kernel is updated. Further details can be found in topic number 737-34288
* Random system hangs no longer occur when calls to the ATI driver are made from Ring3. Further details can be found in topic number 737-34289
* X window no longer fails to respond when GoogleEarth is maximized. Further details can be found in topic number 737-34290
* A segmentation fault no longer occurs when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34276
* Enabling Composite extension no longer displays 8x AA for graphic cards that do not support 8x AA under the Ubuntu 7.10 operating system. Further details can be found in topic number 737-34291
* Display corruption is no longer noticed at logon when compiz is enabled. Further details can be found in topic number 737-34292
* Launching the glxgears application no longer results in segmentation faults. Further details can be found in topic number 737-34293
* GoogleEarth: Launching the application in horizontal mode on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-34293
* Specviewperf 8.1 64 bit version: Segmentation faults no longer occurs on IGP systems. Further details can be found in topic number 737-34294
* Maya 2008: Moving the render window no longer results in the operating system failing. Further details can be found in topic number 737-34295
* Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-34296
Known Issues
* The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
* Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
* SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center but does not apply to the TV display output. Further details can be found in topic number 737-34297
* Running X server without a window manager may result in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
* Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-34298
* Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
* Corruption may be noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
* Quake 3 Arena (demo): Segmentation faults may occur when attempting to play the game. Further details can be found in topic number 737-34302
* Specviewperf: Launching the application may result in the Linux operating system failing to respond. Further details can be found in topic number 737-34282
* Opening a terminal and running semi-automated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-34283
* A segmentation fault may occur when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34319
* FGL_GLXGEARS or GLXGEARS: X may fail to respond when launching either of the applications. Further details can be found in topic number 737-34316
* Maya 2008: Various comparison failures may be noticed. Further details can be found in topic number 737-34277
* The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-34317
* DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
* SPEC Viewperf 8.1: A performance drop may be noticed when running the application under Linux. Further details can be found in topic number 737-34279
* Maya2008: The hardware render buffer may fail to render/display the image. Further details can be found in topic number 737-34280
* May2008: The hardware render Perl script may display an error message when rendering. Further details can be found in topic number 737-34281
I wonder when it will appear in Arch's repositories

Yea, it would be great as at Phoronix forums some people are reporting 10% performance increase in games
EDIT: Some release notes from AMD
New Features
This release of the Catalyst™ Linux software driver introduces UYVY and YUY2 pixel format support. This support provides interleaved stream support for video playback applications such as TVTime and MythTV.
Resolved Issues
The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
*Enemy Territory: Quake Wars: Playing the demo on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-35208
*Maya 2008: An incorrect colormap is no longer displayed for texture selector on systems running X. Further details can be found in topic number 737-35207
*Quake 3 Arena (demo): Segmentation faults no longer occur when attempting to play the game. Further details can be found in topic number 737-35206
*Quake3: Corruption is no longer noticed when changing the display resolution when the game is running. Further details can be found in topic number 737-35209
*SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center and now gets applied to the TV display output. Further details can be found in topic number 737-34297
*Running X server without a window manager no longer results in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
*Clock Gating is now supported and enable under the Linux operating system. Further details can be found in topic number 737-35191
*The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-35192
*Using the wrong delimiter in aticonfig --set-dispattrib=<disp>,<attr>, <value> no longer results in a segmentation fault. Further details can be found in topic number 737-35194
*Audio out is now functioning after the installation of the ATI graphics drivers for Ubuntu 7.10. Further details can be found in topic number 737-35196
*Bandwidth corruption is no longer noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Playing a video clip using mplayer with the Xv extension enabled no longer results in an error indicating that Xv could not find a free Xv port. Further details can be found in topic number 737-35198
*Corruption is no longer noticed when enabling Big Desktop on systems containing an ATI FireGL X1 series of product and running X. Further details can be found in topic number 737-35199
*Running the X server generations test no longer results in the operating system failing to respond or a Kernel panic to occur after first server generation on SuSE 10.3 64 bit. Further details can be found in topic number 737-35200
*Attempting to resize a 2D application window no longer results in poor performance being noticed when composing is enabled. Further details can be found in topic number 737-35201
*Screen flicker is no longer noticed after running amdcccle in X. Further details can be found in topic number 737-35202
*Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-35203
*Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-35204
*Starting glxgears and/or fgl_glxgears no longer results in the gears failing to render on SuSE 10.2 x86_64. Further details can be found in topic number 737-35205
*FGL_GLXGEARS or GLXGEARS: X no longer fails to respond when launching either of the applications. Further details can be found in topic number 737-35210
Known Issues
The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-35219
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
*Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI *Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
*Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
*DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
*Setting the Overscan to an invalid value may result in segmentation faults. Further details can be found in topic number 737-35211
*An incorrect error message may be returned when applying an unsupported TV geometry in a console terminal. Further details can be found in topic number 737-35212
*Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-35213
*An X segmentation fault may occur when launching SUZI/textured video. Further details can be found in topic number 737-35214
*Creating two successive connections may result in direct GL context to fail. Further details can be found in topic number 737-35215
*Moving the mouse or tapping a key may fail to close an OpenGL screen-saver and bring the user back to the x desktop. Further details can be found in topic number 737-35216
*The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-35217
*Opening a terminal and running semiautomated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-35218
Last edited by Zibi1981 (2008-06-19 15:42:23)

Similar Messages

ATI Catalyst 9.2 and "Incompatible display adapter has been disabled."

Hi,
I have this issue... on 3 GPUs. Only one is working. 2 x 3870x2 in crossfire / Vista x64 SP1
I tried everything possible : uninstall all ATI software before, clean registry, delete files, temporary files, many uninstall and reboots, trying different settings in BIOS . Same issue.
This time I choose to install 9.2 drivers only (without Control Center), but the result is the same.
The problem appears since v8.11, but I was able to install at the end by cleaning / reinstalling many times.
v8.12, v9.1, v9.2 are impossible to install correctly on my system. I'm very disapointed.
I've been waiting about 6 month for 8.10 to have stable drivers...
Maybe installing ATI drivers should be proposed to Olympic Games category...
I asked to ATI if they have a tool to clean all previous drivers, and they suggested this link :
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1447
Look at the utility cat-uninstaller.exe date : 10/08/2003 !!!
It's possible that the problem comes from old drivers, but I refuse to format / reinstall the system each time ATI release a new driver. I did that for 8.12 and I had the same issue.
For users who have this problem : OPEN A TICKET TO ATI CUSTOMER CARE !!!
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=31625
That's the olny way to solve this issue.
My system below :
AMD Phenom 9950 BE / Sunbeam Core-Contact Freezer / ASUS M3A32-MVP DELUXE-WIFI-AP (AMD 790FX/SB600 - BIOS v1406) / OCZ Reaper HPC Edition 8Go ( 4*2Go ) PC8500 1066MHz Cas 5-5-5-18 / Quad CrossfireX : dual MSI R3870X2-T2D1G-OC - ATI Catalyst 8.11 / RAID0 : 2x Samsung - Spinpoint F1 - 320 Go 7200 rpm SATA II 16 Mo cache / PSU : Thermaltake - TOUGHPOWER 1200W / VISTA x64 SP1

I did tests on my second system :
System 2 :
AMD Athlon X2 6400+ / ASUS M3A79-T Deluxe (AMD 790FX/SB750) / 8GB DDR2 800MHz Corsair Doninator / RAID0 2x Samsung 200 Go SATA II
CrossfireX : 2x MSI RX3870-T2D512E-OC (v120 + v803) / ATI Catalyst 9.1 / Cooler Master Real Power M620 (620W/efficiency >80%) / VISTA x64 SP1
On this system :
Catalyst 9.1 working and Crysis Warhead too
Catalyst 9.2 installation is OK, but :
- Crysis Warhead hang at 85% when a level is loaded
- Crysis v1.2.1 load correctly, but hang after 1 minute
- I noticed that when I lanch CPU-Z 0.3.2 I have on "Bus Interface"
-card 1 : PCI-E x16 2.0@ x16 2.0
-card 2 : PCI-E x16 2.0@ x16 (in catalyst 8.10, both are @2.0)
Uninstall 9.2 and visual c++ x64, reboot, install 9.1 => 2 x GPU disabled error 43 !!!
Going back to 8.10 : it's the last working stable revision from MSI.
For users who use MSI Live update, and drivers from MSI : what are the last ATI Catalyst revision drivers furbished by MSI ?
I would like to have feedback (vista x64, crossfirex).
Thanks

Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control

i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website
But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,,
i have now this drivers :
http://driverscollection.com/?H=Radeon%20HD%203100&By=ATI&SS=Windows%20XP
Manufacturer:ATI
Hardware:ATI Radeon HD 3100
Software type:Catalyst Software Suite
Version:11.8
File Size:51.38Mb (53881048 bytes)
Released:16 Aug 2011
Uploaded:27 Aug 2011
Views:159
Downloads:55
System:
Windows XPWindows XP Media Center
Description:Catalyst Software Suite for ATI Radeon HD 3100
Package Includes:
Display Driver
OpenCL Driver
ATI Integrated Driver
Catalyst Control Center
Download ATI Radeon HD 3100 Catalyst Software Suite v.11.8
im not sure if its not t o `BIG` driver for this graph card..
cus its for Ati Radeon HD 3100 and in my Toshiba L350D 20-D i have Ati Radeon 3100 ....

Hi
Here you can download the latest Catalyst software:
http://www.amd.com/us/products/technologies/amd-catalyst/Pages/catalyst.aspx

Satellite M300 - display driver stopped and recovered keeps popping up

Hi
I am new to this forum took me half hour to find how to post this.
If any one knows a fix please help

Hi
As I understood your very short posting: you got an message that the display driver stopped or crashed and recovered again.
Right?
Maybe an new display driver installation would help to sort of this issue.?
I would recommend you to uninstall the previous driver.
Clean the system using CCLeaner (or other 3rd party tool)
Reboot the unit, download and finally install the newest version of display driver released for your notebook model. Reboot the unit.
Voila

ATI Proprietary Linux Driver Version 8.29.6

The new ATI drivers are out.
Be aware that people using Radeon cards < 9500 should stay with version 8.28.8 as it is mentioned on the ati website.

R200 series didn't work correctly at all with the latest few driver releases, so it's quite logic to get those off the "known problems" list in this way. The R200 series are damn old these days and are fully supported by the opensource drivers, just like the R100 series that were dropped before.
I wouldn't even recommend fglrx with Xorg 7.1 for the older ATI cards, the opensource drivers work so much better.

Arch linux doesn't boot after installing AMD ATI Catalyst

I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
AMD Catalyst ArchWiki.
I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
[catalyst-stable]
Server = http://catalyst.wirephire.com/repo/catalyst/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
#Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
Then I have update pacman's database and install below packages:
catalyst-hook
catalyst-utils-pxp
lib32-catalyst-utils-pxp
(No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
After installing it, I have configured the driver, configuring X using below command:
# aticonfig --initial
In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
To perform a switch into Intel's IGP I have also installed the mesa-libgl package and Intel's drivers: xf86-video-intel and intel-dri .
I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
# systemctl enable catalyst-hook
# systemctl start catalyst-hook
And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
blacklist radeon
and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
catalyst_build_module all
Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
Starting temp files linker to catalyst...
Starting Catalyst event Daemon...
[ OK ] Started Catalyst event Daemon
Starting Catalyst's fglrx kernel' module builder...
[ OK ] Started temp files linker for catalyst.
[ OK ] Started Catalyst's fglrx kernel' modue builder.
[ OK ] Started gnome Display manager.
[ OK ] Started Network manager.
[ OK ] Reached target Multi-User system.
[ OK ] Reached target Graphical Interface.
[ OK ] Reached target Network.
I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
Any ideas?
Package versions:
Kernel version 3.17.6-1-ARCH
catalyst-hook 14.12-1
catalyst-utils-pxp 14.12-1
lib32-catalyst-utils-pxp 14.12-1
xorg-server 1.16.2.901-1
xf86-video-intel 2.99.916-3
Last edited by toni (2014-12-13 19:38:38)

FInally I managed to boot arch linux.
I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
Finally I had to add an entry in pacman.conf:
[xorg115]
Server = http://catalyst.wirephire.com/repo/xorg115/$arch
## Mirrors, if the primary server does not work or is too slow:
#Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
#Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
Then performs following actions:
1) # pacman -Syuu catalyst-hook catalyst-utils-pxp
2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev, xf86-input-synaptics, etc.
3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
I have put a comment here.
Last edited by toni (2014-12-14 12:31:29)

[SOLVED] ATI Catalyst Driver Issues

I'm sure issues with these drivers get posted often, but I'm honestly not entirely sure how to search for this. I installed the base system with no issues, but when it came to adding a DE, I had some issues. I tried several times to install the catalyst drivers for my radeon hd 6800. I installed from the official repository using:
#pacman -S catalyst-dkms catalyst-utils
I had no luck starting X server after that so I tried installing from Vi0l0's unnoficial repository. This caused X Server to seg fault every time I attempted to start it.
I'm a little confused on how I am even using gnome at this point considering I have not successfully installed a graphics driver.
I blacklisted radeon and uninstalled catalyst and somehow was able to start X Server. I'm obviously using a lame driver considering every time I move a console window around it moves at around 2 FPS.
How can I successfully install the proprietary fglrx/catalyst drivers?
Last edited by instantaphex (2012-12-10 04:49:49)

Thanks for the replies. It's been a busy week and I have to move my desktop into the kitchen to get internet access because I'm also having ndiswrapper issues. Here is my Xorg.0.log
[ 6.208]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 6.208] X Protocol Version 11, Revision 0
[ 6.208] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 6.209] Current Operating System: Linux archbox 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64
[ 6.209] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8c2fca85-5d82-4e80-9492-3ffe9e0760e5 ro quiet
[ 6.209] Build Date: 08 November 2012 07:09:29PM
[ 6.209]
[ 6.209] Current version of pixman: 0.28.0
[ 6.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6.209] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6.209] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 9 06:53:08 2012
[ 6.231] (==) Using config file: "/etc/X11/xorg.conf"
[ 6.231] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 6.233] (==) ServerLayout "aticonfig Layout"
[ 6.233] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 6.233] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 6.233] (**) | |-->Device "aticonfig-Device[0]-0"
[ 6.233] (==) Automatically adding devices
[ 6.233] (==) Automatically enabling devices
[ 6.233] (==) Automatically adding GPU devices
[ 6.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6.246] Entry deleted from font path.
[ 6.266] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6.266] Entry deleted from font path.
[ 6.266] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6.267] Entry deleted from font path.
[ 6.267] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6.267] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 6.267] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6.267] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6.267] (II) Loader magic: 0x7fcc40
[ 6.267] (II) Module ABI versions:
[ 6.267] X.Org ANSI C Emulation: 0.4
[ 6.267] X.Org Video Driver: 13.1
[ 6.267] X.Org XInput driver : 18.0
[ 6.267] X.Org Server Extension : 7.0
[ 6.270] (--) PCI:*(0:1:0:0) 1002:6739:174b:174b rev 0, Mem @ 0xd0000000/268435456, 0xfd5c0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 6.270] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6.270] Initializing built-in extension Generic Event Extension
[ 6.270] Initializing built-in extension SHAPE
[ 6.270] Initializing built-in extension MIT-SHM
[ 6.270] Initializing built-in extension XInputExtension
[ 6.270] Initializing built-in extension XTEST
[ 6.270] Initializing built-in extension BIG-REQUESTS
[ 6.271] Initializing built-in extension SYNC
[ 6.271] Initializing built-in extension XKEYBOARD
[ 6.271] Initializing built-in extension XC-MISC
[ 6.271] Initializing built-in extension SECURITY
[ 6.271] Initializing built-in extension XINERAMA
[ 6.271] Initializing built-in extension XFIXES
[ 6.271] Initializing built-in extension RENDER
[ 6.271] Initializing built-in extension RANDR
[ 6.271] Initializing built-in extension COMPOSITE
[ 6.271] Initializing built-in extension DAMAGE
[ 6.271] Initializing built-in extension MIT-SCREEN-SAVER
[ 6.271] Initializing built-in extension DOUBLE-BUFFER
[ 6.271] Initializing built-in extension RECORD
[ 6.271] Initializing built-in extension DPMS
[ 6.271] Initializing built-in extension X-Resource
[ 6.271] Initializing built-in extension XVideo
[ 6.271] Initializing built-in extension XVideo-MotionCompensation
[ 6.271] Initializing built-in extension XFree86-VidModeExtension
[ 6.271] Initializing built-in extension XFree86-DGA
[ 6.271] Initializing built-in extension XFree86-DRI
[ 6.271] Initializing built-in extension DRI2
[ 6.271] (II) "glx" will be loaded by default.
[ 6.271] (II) LoadModule: "glx"
[ 6.307] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6.325] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 6.325] compiled for 6.9.0, module version = 1.0.0
[ 6.326] Loading extension GLX
[ 6.326] (II) LoadModule: "fglrx"
[ 6.326] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 6.497] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 6.498] compiled for 1.4.99.906, module version = 9.0.2
[ 6.498] Module class: X.Org Video Driver
[ 6.499] (II) Loading sub module "fglrxdrm"
[ 6.499] (II) LoadModule: "fglrxdrm"
[ 6.499] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.513] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.513] compiled for 1.4.99.906, module version = 9.0.2
[ 6.513] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[ 6.513] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[ 6.513] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[ 6.513] (++) using VT number 1
[ 6.513] (WW) Falling back to old probe method for fglrx
[ 6.541] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 6.555] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.555] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.569] (--) Chipset Supported AMD Graphics Processor (0x6739) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:4:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 6.576] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 6.577] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 6.577] (II) AMD Video driver is signed
[ 6.577] (II) fglrx(0): pEnt->device->identifier=0x1cfb770
[ 6.578] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[ 6.578] (II) Loading sub module "vgahw"
[ 6.578] (II) LoadModule: "vgahw"
[ 6.578] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 6.591] (II) Module vgahw: vendor="X.Org Foundation"
[ 6.591] compiled for 1.13.0, module version = 0.1.0
[ 6.591] ABI class: X.Org Video Driver, version 13.1
[ 6.591] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 6.591] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 6.591] (==) fglrx(0): Default visual is TrueColor
[ 6.591] (**) fglrx(0): Option "DPMS" "true"
[ 6.592] (==) fglrx(0): RGB weight 888
[ 6.592] (II) fglrx(0): Using 8 bits per RGB
[ 6.592] (==) fglrx(0): Buffer Tiling is ON
[ 6.592] (II) Loading sub module "fglrxdrm"
[ 6.592] (II) LoadModule: "fglrxdrm"
[ 6.592] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 6.592] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 6.592] compiled for 1.4.99.906, module version = 9.0.2
[ 6.596] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.596] ukiDynamicMajor: failed to open /proc/ati/major
[ 6.596] (**) fglrx(0): NoAccel = NO
[ 6.596] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 6.596] (--) fglrx(0): Chipset: "AMD Radeon HD 6800 Series " (Chipset = 0x6739)
[ 6.596] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x174b)
[ 6.596] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 6.596] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 6.596] (--) fglrx(0): MMIO registers at 0xfd5c0000
[ 6.596] (--) fglrx(0): I/O port at 0x0000ce00
[ 6.596] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 6.619] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 6.621] (II) Loading sub module "vbe"
[ 6.621] (II) LoadModule: "vbe"
[ 6.621] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 6.622] (II) Module vbe: vendor="X.Org Foundation"
[ 6.622] compiled for 1.13.0, module version = 1.1.0
[ 6.622] ABI class: X.Org Video Driver, version 13.1
[ 6.622] (II) fglrx(0): VESA BIOS detected
[ 6.622] (II) fglrx(0): VESA VBE Version 3.0
[ 6.622] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 6.622] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 6.622] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 6.622] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 6.622] (II) fglrx(0): VESA VBE OEM Product: BARTS
[ 6.622] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 6.662] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 6.662] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 6.662] (II) fglrx(0): PCIE card detected
[ 6.662] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 6.662] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 6.662] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 6.662] (EE) fglrx(0): Fail to init MGPU configuration:0x0!
[ 6.662] (II) fglrx(0): RandR 1.2 support is enabled!
[ 6.662] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 6.662] (==) fglrx(0): Center Mode is disabled
[ 6.662] (II) Loading sub module "fb"
[ 6.662] (II) LoadModule: "fb"
[ 6.662] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6.663] (II) Module fb: vendor="X.Org Foundation"
[ 6.663] compiled for 1.13.0, module version = 1.0.0
[ 6.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6.663] (II) Loading sub module "ddc"
[ 6.663] (II) LoadModule: "ddc"
[ 6.663] (II) Module "ddc" already built-in
[ 6.783] (EE) fglrx(0): ASYNCIO service has not started yet while register message handler for DAL
[ 6.785] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 6.785] (II) fglrx(0): Output DFP2 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP3 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP4 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP5 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP6 has no monitor section
[ 6.785] (II) fglrx(0): Output DFP7 has no monitor section
[ 6.785] (II) fglrx(0): Output CRT1 has no monitor section
[ 6.785] (II) Loading sub module "ddc"
[ 6.785] (II) LoadModule: "ddc"
[ 6.785] (II) Module "ddc" already built-in
[ 6.785] (II) fglrx(0): Connected Display0: CRT1
[ 6.785] (II) fglrx(0): Display0: Failed to get EDID information.
[ 6.785] (II) fglrx(0): EDID for output DFP1
[ 6.785] (II) fglrx(0): EDID for output DFP2
[ 6.785] (II) fglrx(0): EDID for output DFP3
[ 6.785] (II) fglrx(0): EDID for output DFP4
[ 6.785] (II) fglrx(0): EDID for output DFP5
[ 6.785] (II) fglrx(0): EDID for output DFP6
[ 6.785] (II) fglrx(0): EDID for output DFP7
[ 6.785] (II) fglrx(0): EDID for output CRT1
[ 6.785] (II) fglrx(0): Manufacturer: ACR Model: 53 Serial#: 2456821854
[ 6.785] (II) fglrx(0): Year: 2009 Week: 27
[ 6.785] (II) fglrx(0): EDID Version: 1.3
[ 6.785] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 6.785] (II) fglrx(0): Sync: Separate
[ 6.786] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 6.786] (II) fglrx(0): Gamma: 2.20
[ 6.786] (II) fglrx(0): DPMS capabilities: StandBy Suspend; RGB/Color Display
[ 6.786] (II) fglrx(0): First detailed timing is preferred mode
[ 6.786] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.292 greenY: 0.603
[ 6.786] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 6.786] (II) fglrx(0): Supported established timings:
[ 6.786] (II) fglrx(0): 720x400@70Hz
[ 6.786] (II) fglrx(0): 640x480@60Hz
[ 6.786] (II) fglrx(0): 640x480@67Hz
[ 6.786] (II) fglrx(0): 640x480@72Hz
[ 6.786] (II) fglrx(0): 640x480@75Hz
[ 6.786] (II) fglrx(0): 800x600@56Hz
[ 6.786] (II) fglrx(0): 800x600@60Hz
[ 6.786] (II) fglrx(0): 800x600@72Hz
[ 6.786] (II) fglrx(0): 800x600@75Hz
[ 6.786] (II) fglrx(0): 832x624@75Hz
[ 6.786] (II) fglrx(0): 1024x768@60Hz
[ 6.786] (II) fglrx(0): 1024x768@70Hz
[ 6.786] (II) fglrx(0): 1024x768@75Hz
[ 6.786] (II) fglrx(0): 1280x1024@75Hz
[ 6.786] (II) fglrx(0): 1152x864@75Hz
[ 6.786] (II) fglrx(0): Manufacturer's mask: 0
[ 6.786] (II) fglrx(0): Supported standard timings:
[ 6.786] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 6.786] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 6.786] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 6.786] (II) fglrx(0): Supported detailed timing:
[ 6.786] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 6.786] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 6.786] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 6.786] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 6.786] (II) fglrx(0): Monitor name: Acer V173
[ 6.786] (II) fglrx(0): Serial No: LE10D0928502
[ 6.786] (II) fglrx(0): EDID (in hex):
[ 6.786] (II) fglrx(0): 00ffffffffffff00047253005e207092
[ 6.786] (II) fglrx(0): 1b13010368221b78ca3dc5a6564a9a25
[ 6.786] (II) fglrx(0): 125054bfef80714f8140818001010101
[ 6.786] (II) fglrx(0): 010101010101302a009851002a403070
[ 6.786] (II) fglrx(0): 1300520e1100001e000000fd00384c1f
[ 6.786] (II) fglrx(0): 500e000a202020202020000000fc0041
[ 6.786] (II) fglrx(0): 63657220563137330a0a0a0a000000ff
[ 6.786] (II) fglrx(0): 004c45313044303932383530320a001d
[ 6.786] (II) fglrx(0): Printing probed modes for output CRT1
[ 6.786] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 6.786] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1328 1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1376 1488 1800 768 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1376 1488 1800 720 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 6.786] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6.786] (II) fglrx(0): Output DFP1 disconnected
[ 6.786] (II) fglrx(0): Output DFP2 disconnected
[ 6.786] (II) fglrx(0): Output DFP3 disconnected
[ 6.786] (II) fglrx(0): Output DFP4 disconnected
[ 6.786] (II) fglrx(0): Output DFP5 disconnected
[ 6.786] (II) fglrx(0): Output DFP6 disconnected
[ 6.786] (II) fglrx(0): Output DFP7 disconnected
[ 6.786] (II) fglrx(0): Output CRT1 connected
[ 6.786] (II) fglrx(0): Using exact sizes for initial modes
[ 6.786] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 6.786] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6.786] (II) fglrx(0): DPI set to (96, 96)
[ 6.786] (II) fglrx(0): Eyefinity capable adapter detected.
[ 6.786] (II) fglrx(0): Adapter AMD Radeon HD 6800 Series has 6 configurable heads and 1 displays connected.
[ 6.786] (==) fglrx(0): PseudoColor visuals disabled
[ 6.786] (II) Loading sub module "ramdac"
[ 6.786] (II) LoadModule: "ramdac"
[ 6.786] (II) Module "ramdac" already built-in
[ 6.786] (==) fglrx(0): NoDRI = NO
[ 6.786] (==) fglrx(0): Capabilities: 0x00000000
[ 6.786] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 6.786] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 6.786] (==) fglrx(0): UseFastTLS=0
[ 6.786] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 6.786] (--) Depth 24 pixmap format is 32 bpp
[ 6.786] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 6.786] (WW) fglrx(0): ***********************************************************
[ 6.786] (WW) fglrx(0): * DRI initialization failed *
[ 6.786] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 6.787] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 6.787] (WW) fglrx(0): ***********************************************************
[ 6.787] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 6.796] (II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
[ 6.796] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1280) (front color buffer - assumption)
[ 6.796] (II) fglrx(0): Largest offscreen area available: 1280 x 6911
[ 6.797] (==) fglrx(0): Backing store disabled
[ 6.797] Loading extension FGLRXEXTENSION
[ 6.797] (**) fglrx(0): DPMS enabled
[ 6.798] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 6.798] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 6.798] (II) LoadModule: "glesx"
[ 6.798] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 6.863] (II) Module glesx: vendor="X.Org Foundation"
[ 6.863] compiled for 1.4.99.906, module version = 1.0.0
[ 6.863] Loading extension GLESX
[ 6.863] (II) fglrx(0): GLESX enableFlags = 576
[ 6.867] (II) LoadModule: "amdxmm"
[ 6.868] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 6.878] (II) Module amdxmm: vendor="X.Org Foundation"
[ 6.878] compiled for 1.4.99.906, module version = 2.0.0
[ 6.878] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 6.878] (EE) fglrx(0): XMM failed to initialize
[ 6.878] (WW) fglrx(0): No XV video playback available
[ 6.878] (II) fglrx(0): Enable composite support successfully
[ 6.878] (WW) fglrx(0): Option "VendorName" is not used
[ 6.878] (WW) fglrx(0): Option "ModelName" is not used
[ 6.878] (==) fglrx(0): Silken mouse enabled
[ 6.878] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 6.879] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6.939] (--) RandR disabled
[ 6.968] (II) AIGLX: Screen 0 is not DRI capable
[ 6.968] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 6.968] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 7.220] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 7.220] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.220] (II) LoadModule: "evdev"
[ 7.221] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.232] (II) Module evdev: vendor="X.Org Foundation"
[ 7.232] compiled for 1.13.0, module version = 2.7.3
[ 7.232] Module class: X.Org XInput Driver
[ 7.232] ABI class: X.Org XInput driver, version 18.0
[ 7.232] (II) Using input driver 'evdev' for 'Power Button'
[ 7.232] (**) Power Button: always reports core events
[ 7.232] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 7.232] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.232] (--) evdev: Power Button: Found keys
[ 7.232] (II) evdev: Power Button: Configuring as keyboard
[ 7.232] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input13/event13"
[ 7.232] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 7.232] (**) Option "xkb_rules" "evdev"
[ 7.232] (**) Option "xkb_model" "evdev"
[ 7.232] (**) Option "xkb_layout" "us"
[ 7.268] (II) config/udev: Adding input device Power Button (/dev/input/event12)
[ 7.268] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.268] (II) Using input driver 'evdev' for 'Power Button'
[ 7.268] (**) Power Button: always reports core events
[ 7.268] (**) evdev: Power Button: Device: "/dev/input/event12"
[ 7.268] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.268] (--) evdev: Power Button: Found keys
[ 7.268] (II) evdev: Power Button: Configuring as keyboard
[ 7.268] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input12/event12"
[ 7.268] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 7.268] (**) Option "xkb_rules" "evdev"
[ 7.268] (**) Option "xkb_model" "evdev"
[ 7.268] (**) Option "xkb_layout" "us"
[ 7.268] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 7.268] (II) No input driver specified, ignoring this device.
[ 7.268] (II) This device may have been added with another device file.
[ 7.269] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event0)
[ 7.269] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 7.269] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 7.269] (**) Logitech Optical USB Mouse: always reports core events
[ 7.269] (**) evdev: Logitech Optical USB Mouse: Device: "/dev/input/event0"
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Vendor 0x46d Product 0xc016
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found 3 mouse buttons
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found scroll wheel(s)
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found relative axes
[ 7.269] (--) evdev: Logitech Optical USB Mouse: Found x and y relative axes
[ 7.269] (II) evdev: Logitech Optical USB Mouse: Configuring as mouse
[ 7.269] (II) evdev: Logitech Optical USB Mouse: Adding scrollwheel support
[ 7.269] (**) evdev: Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 7.269] (**) evdev: Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/input/input0/event0"
[ 7.269] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE, id 8)
[ 7.269] (II) evdev: Logitech Optical USB Mouse: initialized for relative axes.
[ 7.269] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 7.269] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 7.269] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 7.269] (II) No input driver specified, ignoring this device.
[ 7.269] (II) This device may have been added with another device file.
[ 7.269] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 7.269] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.269] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.269] (**) Logitech USB Keyboard: always reports core events
[ 7.269] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 7.269] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 7.269] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.269] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/input/input1/event1"
[ 7.269] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 7.269] (**) Option "xkb_rules" "evdev"
[ 7.269] (**) Option "xkb_model" "evdev"
[ 7.269] (**) Option "xkb_layout" "us"
[ 7.270] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 7.270] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.270] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 7.270] (**) Logitech USB Keyboard: always reports core events
[ 7.270] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 7.270] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 7.270] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 7.270] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 7.270] (--) evdev: Logitech USB Keyboard: Found keys
[ 7.270] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 7.270] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 7.270] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 7.270] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/input/input2/event2"
[ 7.270] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 7.270] (**) Option "xkb_rules" "evdev"
[ 7.270] (**) Option "xkb_model" "evdev"
[ 7.270] (**) Option "xkb_layout" "us"
[ 7.271] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[ 7.271] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 7.271] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 7.272] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.273] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event11)
[ 7.273] (II) No input driver specified, ignoring this device.
[ 7.273] (II) This device may have been added with another device file.
[ 7.273] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 7.273] (II) No input driver specified, ignoring this device.
[ 7.273] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event7)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.275] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event8)
[ 7.275] (II) No input driver specified, ignoring this device.
[ 7.275] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event9)
[ 7.276] (II) No input driver specified, ignoring this device.
[ 7.276] (II) This device may have been added with another device file.
[ 7.276] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 7.276] (II) No input driver specified, ignoring this device.
[ 7.276] (II) This device may have been added with another device file.
[ 7.279] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 7.287] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 7.287] (II) fglrx(0): Using EDID range info for horizontal sync
[ 7.287] (II) fglrx(0): Using EDID range info for vertical refresh
[ 7.287] (II) fglrx(0): Printing DDC gathered Modelines:
[ 7.287] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 7.287] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.287] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 7.287] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.287] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.288] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 7.288] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7.288] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 7.288] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10.785] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 10.785] (II) fglrx(0): Using hsync ranges from config file
[ 10.785] (II) fglrx(0): Using vrefresh ranges from config file
[ 10.785] (II) fglrx(0): Printing DDC gathered Modelines:
[ 10.785] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.785] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.786] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.786] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10.786] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.739] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 23.739] (II) fglrx(0): Using hsync ranges from config file
[ 23.739] (II) fglrx(0): Using vrefresh ranges from config file
[ 23.739] (II) fglrx(0): Printing DDC gathered Modelines:
[ 23.739] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.739] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 23.739] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 23.739] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 24.928] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 24.928] (II) fglrx(0): Using hsync ranges from config file
[ 24.928] (II) fglrx(0): Using vrefresh ranges from config file
[ 24.928] (II) fglrx(0): Printing DDC gathered Modelines:
[ 24.928] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 24.928] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 24.928] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 24.928] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 24.928] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 24.928] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 24.929] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 24.929] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 24.929] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 24.929] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 27.583] (II) fglrx(0): EDID vendor "ACR", prod id 83
[ 27.583] (II) fglrx(0): Using hsync ranges from config file
[ 27.583] (II) fglrx(0): Using vrefresh ranges from config file
[ 27.583] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.583] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 27.583] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 27.583] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 27.583] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
I'll try out the suggestions you guys have given and update.

ATI Display Driver

I am trying to install the the ATI Display Driver package for a T500 without any of the applications that are included with it. In other words, I only want to install the drivers and nothing else like the Catalyst Control Center, etc.
When I try to do a customized install, I cannot uncheck any of the boxes I don't want installed. It seems like it is all or nothing. what's customizable about that?
Is there a way to do what I want?
Thanks

You could ignore the fact that catalyst control center is installed and just remove CCC from startup (under HKLM\.....\Run in registry) when Windows is starting. Or you could uncompress the package and just install the driver by going into device manager and choose to update driver the driver then select the directory where you uncompressed the package.
-gan

ATI Catalyst /displays/properties/graphics controller

First, I have successfully installed my ATI video card and have downloaded all of the needed updated drivers.
However, I am receiving the following warning message: The ATI Catalyst Control Center is not supported by the
driver version of my enabled graphics adapter the ( Intel(R) 82845G/GL/GE/PE/GV) graphics controller. It goes on to say please update your ATI graphics driver. Or enable your ATI using the displays manager which, is located in the "ATI Catalyst Control Center".
I've gone to the ATI Catalyst Control Center. There I find basic and advanced settings. I tried using the basic step by
step easy set up wizard, and quick settings. I could not get past step one on either one. This wizard told me it was to convert a video file to a differn't video format. My question is would converting a video file to a differn't video format fix the driver version and graphics adapter? Or do I maybe need to install a differn't graphics adapter/controller?

Please stay with your other post.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Satelite Pro A200 ATI display driver problem

Hello there,
Have following problem: Can't install ATI software on my notebook. There is an error message during installation: "Catalyst Install Manager can't initialize Detection Manager".
OS - Vista Business
Display adapter - Mobility Radeon HD2600
Any suggestions?

Hi
You could try to use another installation procedure;
- Unzip the ATI graphic card driver package
- access the device manager and choose the graphic card
- choose update the driver and point to the palace where the display driver package was unzipped.
This should help to renew and to reinstall the graphic driver.

Can I download the ATI Catalyst driver or something for my new iMac?

I've got Windows Vista 32 bit and I would like to have the Catalyst control center stuff so I can control the graphics.
Where can I get this stuff? Can I just download the latest Radeon 4800 series catalyst/driver/software from ATI?
thanks

I need to rephrase my question:
This is the software I need: ATI Catalyst Control Center http://ati.amd.com/products/catalystcontrolcenter/index.html
It's not the display driver I need, but the control center for an ATI product. I need more specific control, which the Catalyst Control Center would give me.
Apple's cd only has the display driver and not this control center.
I downloaded the full suite here: http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista32/common-vista32
When this installs no control center shows up. Any idea, anyone?

ATI display driver rollback

I have desktop running Enterprise Linux server 2.6.18-164. Recently I installed ATI display driver on it. After that I am not able to restart my machine. Is there any way to roll back the recent driver changes???

You can try to boot in text mode (no graphics) and check /etc/X11 directory. Usually, whenever a change in graphics settings occurs, the system makes a backup of the original configuration file (xorg.conf) and then applies the new settings. So, you can try to replace the current configuration file (xorg.conf) with the old one (xorg.conf.backup), if it exists...
kido

Amd catalyst & built-in display driver clash

Hello,
I have a core i5 HP pavilion dv6 entertainment notebook pc with the following specs:
Processor: 2.53Ghz
RAM: 8 Gb
Operating system: Win 7 x64
AMD Radeon HD 6500M/5600/5700 Series: 1 GB
System Model: 3141se
I had a recovery partition on my laptop but a while back when I tried to run it, I kept on getting the same error message " your partition is of GPT style or something like that" and I had to wipe the whole drive and tried recovering from the backup DVDs, without any luck.
Having said that, I installed another copy of Win 7 with the original key provided and it was working fine. A couple of days back I installed a fresh copy of windows and now the problem I am facing is something like that:
Built-in intel display and AMD display driver installs, but I dont see anything in adapter section. Which means no graphics card is installed. When ever I install AMD catalyst driver, my windows turn black and stay that way forever (even though windows in running normally).
Whenever I disable built-in display driver from "device manager" it works fine. But I have had no luck installing AMD catalyst control, I tried literally every version available.
Kindly, help me fix this issue. My Laptop is a crap without the graphics card.
quick help would be appreciated.
Thank you

Use the recovery media to install the AMD graphics driver softpaq.
Choose the AMD video graphics softpaq from the list that appears. The following image is an example from a former HP product loan I was provided by HP. What you see will be a bit different since the notebooks are not in the same model range.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

ATI Radeon 5470 Corrupted Display Driver

Hi, I've updated to windows 8.1 and I'm trying to install the old ATI Mobility Radeon HD 5470 Display Drivers, but when I go to AMD website it tells me to download a new version, and after I install that version I get like 10 fps at Counter Strike: Global Offensive, I think that before I updated to Windows 8.1 I had the ATI Mobility Radeon HD 5470 Display Driver, but it got corrupted so I had to download the new one, but I want to use the old version because atleast it was stable and I could run the game smoothly. Is there anyway I can download the ATI display driver that comes with the computer? Since mine got corrupted and I need to replace it. I don't even know how to keep windows from installing the corrupt one..
Please help

BUMP, @HP
I tried installing every driver that hp recommends me to from this website. Still when I restart my computer I get to a black screen after Windows Logo, but I can boot in Safe Mode (what I'm using right now), I read somewhere that I need to replace the atikmdag in my Drivers folder because it might be corrupt but I don't have any non-corrupted driver to replace it

ATI display driver fails to work with new kernel

Hi,
I've just upgraded from
OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
to most current
OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
Maybe Sergio or Tommy can help?
Thanks in advance.
NJ

I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

ATI Catalyst 8.5 Proprietary Linux Display Driver released

Similar Messages

Maybe you are looking for