ATI catalyst lockups

Hello everyone!
I've been fiddling around with this problem a couple of days, and I can't figure out what is wrong!
I'm using a Radeon 9800XT with the catalyst drivers.
This is my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "RV350 NJ [Radeon 9800 XT]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Whenever I run startx, my gnome loads succesfully. However, as soon as I start a terminal, open a browser.. anything actually - it locks the entire system. I can't move my mouse, can't use the keyboard and have to press the reset button on my PC.
I've tried alot of configs for my xorg.conf file, atm i'm using vesa as driver, so I don't have any hardware acceleration.
Any ideas? If you need me to post the output of any commands, let me know, 'cause I'm a bit rusty atm.
Thanks in advance,
Kevin
Last edited by kevin89 (2008-01-18 14:46:00)

@May-C:
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "false"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "GLcore"
Load "glx"
Load "drm"
Load "dbe"
Load "dri"
Load "extmod"
Load "record"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS" "true"
EndSection
Section "Device"
Option "OpenGLOverlay" "on"
Option "VideoOverlay" "off"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "RV350 NJ [Radeon 9800 XT]"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.23-ARCH i686
Current Operating System: Linux dont-panic 2.6.23-ARCH #1 SMP PREEMPT Tue Jan 15 06:34:36 UTC 2008 i686
Build Date: 20 January 2008 08:27:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 22 01:45:10 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d65c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,00e1 card 0000,0000 rev a1 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,00e0 card 10de,0c11 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,00e4 card 10de,0c11 rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,00e8 card 10de,0c11 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:05:0: chip 10de,00df card 10de,0c11 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:06:0: chip 10de,00ea card 10de,0c11 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,00e5 card f0de,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4e4a card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e6a card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0a:0: chip 10ec,8139 card 4554,434e rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:11:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xec000000 - 0xecffffff (0x1000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:14:0), (0,2,2), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xed000000 - 0xedffffff (0x1000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 NJ [Radeon 9800 XT] rev 0, Mem @ 0xd8000000/27, 0xec030000/16, I/O @ 0xc000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV350 NJ [Radeon 9800 XT] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xec020000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xed021000 - 0xed0210ff (0x100) MX[b]
[1] -1 0 0xee001000 - 0xee001fff (0x1000) MX[b]
[2] -1 0 0xee000000 - 0xee000fff (0x1000) MX[b]
[3] -1 0 0xee005000 - 0xee0050ff (0x100) MX[b]
[4] -1 0 0xee004000 - 0xee004fff (0x1000) MX[b]
[5] -1 0 0xee003000 - 0xee003fff (0x1000) MX[b]
[6] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[7] -1 0 0xec030000 - 0xec03ffff (0x10000) MX[b](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[11] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[b]
[12] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[b]
[13] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b]
[14] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[15] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[16] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[17] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xec020000 - 0xec02ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xed021000 - 0xed0210ff (0x100) MX[b]
[1] -1 0 0xee001000 - 0xee001fff (0x1000) MX[b]
[2] -1 0 0xee000000 - 0xee000fff (0x1000) MX[b]
[3] -1 0 0xee005000 - 0xee0050ff (0x100) MX[b]
[4] -1 0 0xee004000 - 0xee004fff (0x1000) MX[b]
[5] -1 0 0xee003000 - 0xee003fff (0x1000) MX[b]
[6] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[7] -1 0 0xec030000 - 0xec03ffff (0x10000) MX[b](B)
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[11] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[b]
[12] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[b]
[13] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b]
[14] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[15] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[16] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[17] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xec020000 - 0xec02ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xed021000 - 0xed0210ff (0x100) MX[b]
[5] -1 0 0xee001000 - 0xee001fff (0x1000) MX[b]
[6] -1 0 0xee000000 - 0xee000fff (0x1000) MX[b]
[7] -1 0 0xee005000 - 0xee0050ff (0x100) MX[b]
[8] -1 0 0xee004000 - 0xee004fff (0x1000) MX[b]
[9] -1 0 0xee003000 - 0xee003fff (0x1000) MX[b]
[10] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[11] -1 0 0xec030000 - 0xec03ffff (0x10000) MX[b](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[13] -1 0 0xec020000 - 0xec02ffff (0x10000) MX[b](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[19] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[b]
[20] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[b]
[21] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.45.4
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.45.4
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.452.1
(II) ATI Proprietary Linux Driver Build Date: Jan 16 2008 10:42:57
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E4A) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xed021000 - 0xed0210ff (0x100) MX[b]
[5] -1 0 0xee001000 - 0xee001fff (0x1000) MX[b]
[6] -1 0 0xee000000 - 0xee000fff (0x1000) MX[b]
[7] -1 0 0xee005000 - 0xee0050ff (0x100) MX[b]
[8] -1 0 0xee004000 - 0xee004fff (0x1000) MX[b]
[9] -1 0 0xee003000 - 0xee003fff (0x1000) MX[b]
[10] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[11] -1 0 0xec030000 - 0xec03ffff (0x10000) MX[b](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[13] -1 0 0xec020000 - 0xec02ffff (0x10000) MX[b](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[19] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[b]
[20] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[b]
[21] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x820acd8
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xed021000 - 0xed0210ff (0x100) MX[b]
[5] -1 0 0xee001000 - 0xee001fff (0x1000) MX[b]
[6] -1 0 0xee000000 - 0xee000fff (0x1000) MX[b]
[7] -1 0 0xee005000 - 0xee0050ff (0x100) MX[b]
[8] -1 0 0xee004000 - 0xee004fff (0x1000) MX[b]
[9] -1 0 0xee003000 - 0xee003fff (0x1000) MX[b]
[10] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[11] -1 0 0xec030000 - 0xec03ffff (0x10000) MX[b](B)
[12] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[13] -1 0 0xec020000 - 0xec02ffff (0x10000) MX[b](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[b]
[23] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[b]
[24] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b]
[25] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[26] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[27] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[28] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "on"
(**) fglrx(0): Option "VideoOverlay" "off"
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "RADEON 9800 XT" (Chipset = 0x4e4a)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xec030000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.45.4
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: PCI:1:0:0.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: BNQ Model: 766e Serial#: 696
(II) fglrx(0): Year: 2004 Week: 7
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate Composite
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.609
(II) fglrx(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): [email protected]
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1296 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: BenQ FP767-12
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0009d16e76b8020000
(II) fglrx(0): 070e01036c221b78eac4f6a3574a9c23
(II) fglrx(0): 114f54bdef80714f8180818c01010101
(II) fglrx(0): 010101010101bc34009851002a401090
(II) fglrx(0): 1300520e1100001ed50980a0205e6310
(II) fglrx(0): 10605208520e1100001a000000fd0038
(II) fglrx(0): 4c1f530e000a202020202020000000fc
(II) fglrx(0): 0042656e512046503736372d31320015
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 4 power states available:
(II) fglrx(0): 1. 419/365MHz @ 50Hz [enable load balancing, overdrive]
(II) fglrx(0): 2. 317/365MHz @ 50Hz [enable load balancing, overdrive]
(II) fglrx(0): 3. 419/365MHz @ 50Hz [overclocked, enable load balancing, overdrive]
(II) fglrx(0): 4. 419/365MHz @ 50Hz [overclocked, enable load balancing, overdrive]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): OpenGL Overlay enabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 35 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync (60.3 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0 38.16 1024 1048 1152 1280 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): Default mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 (31.0 kHz)
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350"x70.0 25.17 640 656 752 800 350 387 389 449 +vsync (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync (60.3 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"x60.0 38.16 1024 1048 1152 1280 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): Default mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 (31.0 kHz)
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350"x70.0 25.17 640 656 752 800 350 387 389 449 +vsync (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] Mode=0x1f00421b bridge: 0x10de/0x00e1
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00431a
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe8000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [pcie] 0 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xec030000 - 0xec03ffff (0x10000) MX[b]
[1] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xed021000 - 0xed0210ff (0x100) MX[b]
[7] -1 0 0xee001000 - 0xee001fff (0x1000) MX[b]
[8] -1 0 0xee000000 - 0xee000fff (0x1000) MX[b]
[9] -1 0 0xee005000 - 0xee0050ff (0x100) MX[b]
[10] -1 0 0xee004000 - 0xee004fff (0x1000) MX[b]
[11] -1 0 0xee003000 - 0xee003fff (0x1000) MX[b]
[12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[b]O
[13] -1 0 0xec030000 - 0xec03ffff (0x10000) MX[b](B)
[14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[15] -1 0 0xec020000 - 0xec02ffff (0x10000) MX[b](B)
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[20] 0 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[25] -1 0 0x0000e300 - 0x0000e37f (0x80) IX[b]
[26] -1 0 0x0000e200 - 0x0000e2ff (0x100) IX[b]
[27] -1 0 0x0000e100 - 0x0000e107 (0x8) IX[b]
[28] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[29] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[30] -1 0 0x0000e600 - 0x0000e61f (0x20) IX[b]
[31] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x1aa000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.45.4
(II) fglrx(0): Date: Jan 16 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x001ac000
(II) fglrx(0): Interrupt handler installed at IRQ 20.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x00708000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1440)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 416
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 20008000
...dwIRQEnableId: 00000004
Receive enable interrupt ret message
...irqEnableMask: 10000000
...dwIRQEnableId: 00000005
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Also I have this catalyst installed:
catalyst 8.1-2
catalyst-utils 8.1-1
fglrx is also added to the modules array in /etc/rc.conf
Last edited by kevin89 (2008-01-22 00:47:37)

Similar Messages

  • [SOLVED] ATI Catalyst / Xorg issue with Multihead (3monitor)

    i'm having problems for a long time, with different versions of the ATI Catalyst driver and Xorg,
    right now i'm using this versions,
    catalyst-hook 11.2-2
    catalyst-utils 11.2-1
    lib32-catalyst-utils 11.2-1
    xorg-server 1.9.4.901-1
    xorg-server-common 1.9.4.901-1
    xorg-server-utils 7.6-2
    the catalyst package are from the catalyst server recommended by the Arch Wiki
    http://catalyst.apocalypsus.net/repo/catalyst/x86_64
    the problem that i have is that when i try to pass from one monitor to another, when
    i pass to the 3rd one the X crashes, this happen always with the same monitor no matter what.
    here is the backtrace from the startx logs,
    Backtrace:
    0: /usr/bin/X (xorg_backtrace+0x28) [0x49f788]
    1: /usr/bin/X (0x400000+0x60349) [0x460349]
    2: /lib/libpthread.so.0 (0x7f28028b7000+0xf150) [0x7f28028c6150]
    3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86ffff) [0x7f27ff563fff]
    4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f27fecf4000+0x86fb5d) [0x7f27ff563b5d]
    5: /usr/bin/X (0x400000+0x13bce2) [0x53bce2]
    6: /usr/bin/X (0x400000+0x13be31) [0x53be31]
    7: /usr/bin/X (0x400000+0x13a880) [0x53a880]
    8: /usr/bin/X (miPointerUpdateSprite+0x18c) [0x45871c]
    9: /usr/bin/X (0x400000+0x5892d) [0x45892d]
    10: /usr/bin/X (0x400000+0x164266) [0x564266]
    11: /usr/bin/X (mieqProcessDeviceEvent+0x172) [0x49ef52]
    12: /usr/bin/X (mieqProcessInputEvents+0xcc) [0x49f08c]
    13: /usr/bin/X (ProcessInputEvents+0x9) [0x469969]
    14: /usr/bin/X (0x400000+0x2cf73) [0x42cf73]
    15: /usr/bin/X (0x400000+0x2131e) [0x42131e]
    16: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f2801837dcd]
    17: /usr/bin/X (0x400000+0x20ec9) [0x420ec9]
    Segmentation fault at address (nil)
    Fatal server error:
    Caught signal 11 (Segmentation fault). Server aborting
    i wanted to know if there is any official forum / bug tracker  of amd/ati where report this bug,
    or if one of you had this kind of problem before and can give me a hand to resolve this, i would be grateful.
    here is the ati report about the system info,
    http://pastebin.com/jU73mU4W
    http://ideone.com/mcISC
    thanks in advance.
    regards.
    Last edited by hord (2011-07-10 20:26:12)

    solved!
    since the cursor used through the proprietary catalyst driver have issues, use instead the SW cursor,
    Section "Device"
    Option "SWCursor" "true"
    EndSection
    [0] http://ati.cchtml.com/show_bug.cgi?id=86
    [1] http://ati.cchtml.com/show_bug.cgi?id=117
    [2] http://phoronix.com/forums/showthread.p … post209030
    Last edited by hord (2011-07-10 20:25:23)

  • Error in installing ATI catalyst control center after formatting my laptop

    please see this thread. thankyou
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/error-in-installing-ATI-catalyst-control...

    Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

  • Can't install ATI Catalyst

    Hate to ask for help, but can't find anything from google.  Also sorry if this is the wrong place to post it.  Anywho, I'm having trouble installing ATI Catalyst.  When I installed Arch I installed the oss drivers, but I can't play any resource heavy games (like Urban Terror).  If there's another way o fix it without installing Catalyst, that's cool to.
    Anyway, when I do pacman -S catalyst I get:
    resolving dependencies...
    looking for inter-conflicts...
    :: catalyst-utils conflicts with libgl. Remove libgl? [Y/n] y
    error: failed to prepare transaction (could not satisfy dependencies)
    :: ati-dri: requires libgl>=7.2
    I'm not exactly sure how I should take care of that.  Do I need to remove everything installed by the OS driver or what?

    Alright so I think I've got it good. 
    http://crunchbanglinux.org/pastebin/176 - xorg.conf
    I removed libgl and xf86-video-ati, thats all the OS driver comes with, right?  Tryin' to make sure I have everything cleaned up. ;o

  • T500 ATI Catalyst Control Center cannot be started

    I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the graphic drive. But the problem is not solved. I am wondering what could I do now?

    Right click on the battery in the task bar and make sure your Switchable graphics are set to Performance, if it is in energy savings the ATI control panel will not function, you need to use the Intel graphics setup instead.
    Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
    Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

  • ATI Catalyst 4.9 problem

    I searched for this problem with this board in this forum but didn't find anything.  I just upgraded the driver for my built by ATI 9600XT to Catalyst 4.9 without the .NET Framework thing from Catalyst 4.4.  I tried running Aquamark and got a reboot both times I tried it.  The first time was about 30 seconds in, the second time was about 5 seconds in.  I re-installed 4.4 and it works fine.  Has anyone else had this exact problem?  If there's already a post on this, please direct me.  Thanks in advance for any advice you can give me.
    By the way, it's not an overheat or power supply problem as I have plenty of fans and a somewhat competent power supply.  Overdrive was not activated either.  Everything in the system is at stock speeds.  This is the first time I've ever had a spontaneous reboot andI built this PC last December.  I can't think of anything other than the driver that could cause this.

    Here's the verdict.  I got crashes that caused complete reboots and crashes that only crashed back to the desktop and caused the error report thing to come up with both the ATI Catalyst 4.9 Driver and the Omega Driver with fastwrites enabled and disabled with AGP at 8X.  I knew that lowering AGP to 4X fixed a lot of other people's problems, but I was hesitant to try it since I had always been rock stable.  Based on the adivce in this thread, I lowered AGP to 4X and Aquamark 3 finished.  However, I got a score of 30,436 at 30.44 fps where I used to get 31,273 at 31.27 fps with Catalyst 4.4 AGP X8 Fastwrites on.  I know that this is very minor an I will see no real world difference, but an "upgraded" driver should not cause decreased performance or require the user to use less aggressive settings, shame on ATI.
    McGeyser, I've been playing for about 12 years I guess.  Unfortunately for me now, I didn't force myself to learn right-handed.  What's wierd is that I'm right handed for most things, but I do write, eat, shoot a slingshot, play guitar, and brush my teeth left handed.....59 reissue....nice

  • ATI Catalyst /displays/properties/graphics controller

    First, I have successfully installed my ATI video card and have downloaded all of the needed updated drivers.
    However, I am receiving the following warning message: The ATI Catalyst Control Center is not supported by the
    driver version of my enabled graphics adapter the ( Intel(R) 82845G/GL/GE/PE/GV) graphics controller. It goes on to say please update your ATI graphics driver. Or enable your ATI using the displays manager which, is located in the "ATI Catalyst Control Center".
    I've gone to the ATI Catalyst Control Center. There I find basic and advanced settings. I tried using the basic step by
    step easy set up wizard, and quick settings. I could not get past step one on either one. This wizard told me it was to convert a video file to a differn't video format. My question is would converting a video file to a differn't video format fix the driver version and graphics adapter? Or do I maybe need to install a differn't graphics adapter/controller?

    Please stay with your other post.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • ATI Catalyst Install Manager and catalyst Control Center Help

    I just run the Windows 7 Upgrade
    advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
    Could someone direct me where I might t find these programs for Windows 7

    You must not do this. Just continue upgrade installation.
    On my Satellite I got the same message but I have simply continued with upgrade.
    At the end everything went fine.

  • ATI catalyst reinstall

    please how can i reinstall ATI catalyst install manager which i unistall mistakenly?

    Download it from AMD archive and reinstall. Sometimes cpp runtime is needed.
    Regards
    Milos

  • AutoUpdate/Ati Catalyst Broken!

    AutoUpdate/Ati Catalyst Broken!? When using AutoUpdate here are some things I had to do to get it working:
    ) installed standard Creative drivers for my X-FI Titanium 2.7.007
    it worked
    2)? installed ATI Catalyst 9.0
    it stopped working.
    3) by mistake I let Windows Update install its WHQL Creative driver
    AutoUpdate started working
    used the other shortcut for AutoUpdateA.exe to get updates for Creative products in windows 7 64, and it worked everytime to reinstall the Creative 2.7.007
    4) three weeks later I installed Catalyst 9.2 drivers, and immediately after reboot, AutoUpdate is broken.
    Windows 7 Action Center reports errors with Creative AutoUpdate.
    If I delete Creative drivers using CTZAPP, Windows Update upon reboot will install its own update to Creative's drivers......... I reinstall Creative 2.7.007 and Creative AutoUpdate still works.
    5) installed ATI Catalyst and it is broken again. The Catalyst installation breaks it everytime. Reinstalling Windows Update version of Creative drivers, uninstalling those and installing Creative's several times usually fixes AutoUpdate. Within a few days, Autoupdate will be broken.
    Anybody else have the issue with Catalyst 9.0 to 9.2 and Creative AutoUpdate?
    Keep in mind, this is not my "new cause" of the week. I just did a clean format a week or so ago, and I am trying to duplicate the problems others are having with AutoUpdate. About 40-45% of users have ATI cards I would guess and I am trying to figure out if this is a common thing with about half of the Creative users. We install Creative drivers and go along for a few weeks, as many people always say, and then something goes wrong.......A new Catalyst is released about once a month or every six weeks.

    #Re: AutoUpdate/Ati Catalyst Broken!B <div class="lia">"" try and just uninstall the CCC (Catalyst Control Center) and not the actual video drivers. Its the CCC (the little red "ATI" box in your task manager on the lower right) that is causing this problem. You will still have accelerated video with the drivers installed but not the special ATI utility to configure them. Use the built-in Windows 7 advanced graphics utility when you right click on the desktop (right-click and choose "Screen Resolution"). Inside that window is a link called "Advanced settings" which will let you do the same functions as the CCC does without the CCC's interference.
    I hope this hel
    ps.
    Well this is not a good solution as you will loose advanced settings for your graphic card.

  • Arch linux doesn't boot after installing AMD ATI Catalyst

    I have a laptop which has a integrated graphic card intel 4th generation (4600) and an AMD ATI R9 m265x (hybrid Intel/AMD graphics card) so I have just installed AMD ATI Catalyst proprietary ones by following
    AMD Catalyst ArchWiki.
    I have used "Installing from the unofficial repository" method so in my pacman.conf I have added below entry for [catalyst-stable]:
    [catalyst-stable]
    Server = http://catalyst.wirephire.com/repo/catalyst/$arch
    ## Mirrors, if the primary server does not work or is too slow:
    #Server = http://70.239.162.206/catalyst-mirror/repo/catalyst/$arch
    #Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/catalyst/$arch
    #Server = http://mirror.hactar.bz/Vi0L0/catalyst/$arch
    Then I have update pacman's database and install below packages:
    catalyst-hook
    catalyst-utils-pxp
    lib32-catalyst-utils-pxp
    (No need to install catalyst-total-pxp as I have installed catalyst-utils-pxp)
    After installing it, I have configured the driver, configuring X using below command:
    # aticonfig --initial
    In order to use PowerXpress support I have installed catalyst-utils-pxp package plus additional lib32-catalyst-utils-pxp.
    To perform a switch into Intel's IGP I have also installed the mesa-libgl  package and Intel's drivers: xf86-video-intel  and intel-dri .
    I have enable the automatic update by enabling the catalyst-hook.service with below commands since it automatically rebuilds the fglrx modules while the system shuts down or reboots (so I haven't to do it manually each time kernel is updated using Catalyst-generator):
    # systemctl enable catalyst-hook
    # systemctl start catalyst-hook
    And finally I have blacklisted radeon module by creating "/etc/modprobe.d/blacklisted.conf" file which content is:
    blacklist radeon
    and also I have ensured that fglrx line is added in "/etc/modules-load.d/Catalyst.conf" file.
    To avoid problems, I have rebuilt the fglrx module by doing (I know it is not necessary as it is done by catalyst-hook):
    catalyst_build_module all
    Once I reboot, arch linux does not boot. Last lines printed out are below and then it freezes:
    Starting temp files linker to catalyst...
    Starting Catalyst event Daemon...
    [ OK ] Started Catalyst event Daemon
    Starting Catalyst's fglrx kernel' module builder...
    [ OK ] Started temp files linker for catalyst.
    [ OK ] Started Catalyst's fglrx kernel' modue builder.
    [ OK ] Started gnome Display manager.
    [ OK ] Started Network manager.
    [ OK ] Reached target Multi-User system.
    [ OK ] Reached target Graphical Interface.
    [ OK ] Reached target Network.
    I have tried to put nomodeset as a kernel parameter but it does not work. Also, after reading ArchWiki, I have noticed that it is recommended to don't do this as I am using catalyst-utils-pxp because intel driver needs it so I have removed nomodeset parameter from kernel but It continues not working.
    Any ideas?
    Package versions:
    Kernel version 3.17.6-1-ARCH
    catalyst-hook 14.12-1
    catalyst-utils-pxp 14.12-1
    lib32-catalyst-utils-pxp 14.12-1
    xorg-server 1.16.2.901-1
    xf86-video-intel 2.99.916-3
    Last edited by toni (2014-12-13 19:38:38)

    FInally I managed to boot arch linux.
    I had to downgrade xorg-server from 1.16.2.901-1 to 1.15.2-1.
    It seems there is a problem with Catalyst 14.12-1 and xorg-server 1.16.2.901-1.
    Also I had to replace desktop manager from gdm to lightdm as gdm raises segmentation faults using xorg-server versions 1.16.2.901-1 and 1.15.2-1.
    Finally I had to add an entry in pacman.conf:
    [xorg115]
    Server = http://catalyst.wirephire.com/repo/xorg115/$arch
    ## Mirrors, if the primary server does not work or is too slow:
    #Server = http://mirror.rts-informatique.fr/archlinux-catalyst/repo/xorg115/$arch
    #Server = http://mirror.hactar.bz/Vi0L0/xorg115/$arch
    Then performs following actions:
    1)  # pacman -Syuu catalyst-hook catalyst-utils-pxp
    2) Uninstall all the packages xf86* such as xf86-video-intel, xf86-input-evdev,  xf86-input-synaptics, etc.
    3) Install the packages uninstalled in step 2 and install them again using xorg115 repo, for example, # pacman -S xorg115/xf86-video-intel xorg115/xf86-input-evdev xorg115/xf86-input-synaptics
    I have put a comment here.
    Last edited by toni (2014-12-14 12:31:29)

  • ATI Catalyst 9.2 and "Incompatible display adapter has been disabled."

    Hi,
    I have this issue... on 3 GPUs. Only one is working.  2 x 3870x2 in crossfire / Vista x64 SP1
    I tried everything possible : uninstall all ATI software before, clean registry, delete files, temporary files, many uninstall and reboots, trying different settings in BIOS . Same issue.
    This time I choose to install 9.2 drivers only (without Control Center), but the result is the same.
    The problem appears since v8.11, but I was able to install at the end by cleaning / reinstalling many times.
    v8.12, v9.1, v9.2 are impossible to install correctly on my system. I'm very disapointed.
    I've been waiting about 6 month for 8.10 to have stable drivers...
    Maybe installing ATI drivers should be proposed to Olympic Games category...
    I asked to ATI if they have a tool to clean all previous drivers, and they suggested this link :
    https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=1447
    Look at the utility cat-uninstaller.exe date : 10/08/2003 !!!
    It's possible that the problem comes from old drivers, but I refuse to format / reinstall the system each time ATI release a new driver. I did that for 8.12 and I had the same issue.
    For users who have this problem : OPEN A TICKET TO ATI CUSTOMER CARE !!!
    http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questionID=31625
    That's the olny way to solve this issue.
    My system below :
    AMD Phenom 9950 BE / Sunbeam Core-Contact Freezer / ASUS M3A32-MVP DELUXE-WIFI-AP (AMD 790FX/SB600 - BIOS v1406) / OCZ Reaper HPC Edition 8Go ( 4*2Go ) PC8500 1066MHz Cas 5-5-5-18 / Quad CrossfireX : dual MSI R3870X2-T2D1G-OC - ATI Catalyst 8.11 / RAID0 : 2x Samsung - Spinpoint F1 - 320 Go 7200 rpm SATA II 16 Mo cache / PSU : Thermaltake - TOUGHPOWER 1200W / VISTA x64 SP1

    I did tests on my second system :
    System 2 :
    AMD Athlon X2 6400+ / ASUS M3A79-T Deluxe (AMD 790FX/SB750) / 8GB DDR2 800MHz Corsair Doninator / RAID0 2x Samsung 200 Go SATA II
    CrossfireX : 2x MSI RX3870-T2D512E-OC (v120 + v803) / ATI Catalyst 9.1 / Cooler Master Real Power M620 (620W/efficiency >80%) / VISTA x64 SP1
    On this system :
    Catalyst 9.1 working and Crysis Warhead too
    Catalyst 9.2 installation is OK, but :
        - Crysis Warhead hang at 85% when a level is loaded
        - Crysis v1.2.1 load correctly, but hang after 1 minute
        - I noticed that when I lanch CPU-Z 0.3.2 I have on "Bus Interface"
            -card 1 : PCI-E x16 [email protected] x16 2.0
            -card 2 : PCI-E x16 [email protected] x16          (in catalyst 8.10, both are @2.0)
    Uninstall 9.2 and visual c++ x64, reboot, install 9.1 => 2 x GPU disabled error 43 !!!
    Going back to 8.10 : it's the last working stable revision from MSI.
    For users who use MSI Live update, and drivers from MSI : what are the last ATI Catalyst revision drivers furbished by MSI ?
    I would like to have feedback (vista x64, crossfirex).
    Thanks

  • ATI Catalyst 8.5 Proprietary Linux Display Driver released

    New ATI Catalyst™ 8.5 Proprietary Linux Display Driver was released the day before yesterday and according to release notes it has many improvements.
    New Features
    This release of the Catalyst™ Linux software driver introduces Mipmap Detail, Catalyst A.I., and AA Filters in the 3D ORCA page of the Catalyst™ Control Center Linux Edition.
    Resolved Issues
    * The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
    * Support for video playback on the second head in dual head mode is now available. Further details can be found in topic number 737-26985
    * Unresolved symbols in Xorg log under RHEL 4u6 32 and 64 bit no longer occur. Further details can be found in topic number 737-34284
    * The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-34285
    * Change VT no longer fails when kernel module is not loaded. Further details can be found in topic number 737-34286
    * Switching to the virtual terminal multiple times no longer results in X displaying corruption. Further details can be found in topic number 737-34287
    * Catalyst Control Center: The Preference page is now localized for all supported languages. Further details can be found in topic number 737-34275
    * The Linux kernel module is no longer installed to wrong location if the Linux kernel is updated. Further details can be found in topic number 737-34288
    * Random system hangs no longer occur when calls to the ATI driver are made from Ring3. Further details can be found in topic number 737-34289
    * X window no longer fails to respond when GoogleEarth is maximized. Further details can be found in topic number 737-34290
    * A segmentation fault no longer occurs when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34276
    * Enabling Composite extension no longer displays 8x AA for graphic cards that do not support 8x AA under the Ubuntu 7.10 operating system. Further details can be found in topic number 737-34291
    * Display corruption is no longer noticed at logon when compiz is enabled. Further details can be found in topic number 737-34292
    * Launching the glxgears application no longer results in segmentation faults. Further details can be found in topic number 737-34293
    * GoogleEarth: Launching the application in horizontal mode on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-34293
    * Specviewperf 8.1 64 bit version: Segmentation faults no longer occurs on IGP systems. Further details can be found in topic number 737-34294
    * Maya 2008: Moving the render window no longer results in the operating system failing. Further details can be found in topic number 737-34295
    * Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-34296
    Known Issues
    * The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
    * Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
    * Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
    * SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center but does not apply to the TV display output. Further details can be found in topic number 737-34297
    * Running X server without a window manager may result in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
    * Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-34298
    * Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
    * Corruption may be noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
    * Quake 3 Arena (demo): Segmentation faults may occur when attempting to play the game. Further details can be found in topic number 737-34302
    * Specviewperf: Launching the application may result in the Linux operating system failing to respond. Further details can be found in topic number 737-34282
    * Opening a terminal and running semi-automated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-34283
    * A segmentation fault may occur when running SPECViewperf on systems containing an ATI FireGL V5100 series product and running SUSE 10.3 x86. Further details can be found in topic number 737-34319
    * FGL_GLXGEARS or GLXGEARS: X may fail to respond when launching either of the applications. Further details can be found in topic number 737-34316
    * Maya 2008: Various comparison failures may be noticed. Further details can be found in topic number 737-34277
    * The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-34317
    * DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
    * SPEC Viewperf 8.1: A performance drop may be noticed when running the application under Linux. Further details can be found in topic number 737-34279
    * Maya2008: The hardware render buffer may fail to render/display the image. Further details can be found in topic number 737-34280
    * May2008: The hardware render Perl script may display an error message when rendering. Further details can be found in topic number 737-34281
    I wonder when it will appear in Arch's repositories

    Yea, it would be great as at Phoronix forums some people are reporting 10% performance increase in games
    EDIT: Some release notes from AMD
    New Features
    This release of the Catalyst™ Linux software driver introduces UYVY and YUY2 pixel format support. This support provides interleaved stream support for video playback applications such as TVTime and MythTV.
    Resolved Issues
    The following section provide a brief description of resolved issues with the latest version of the ATI Catalyst™ Linux software suite. These include:
    *Enemy Territory: Quake Wars: Playing the demo on a system running X no longer results in corruption being noticed. Further details can be found in topic number 737-35208
    *Maya 2008: An incorrect colormap is no longer displayed for texture selector on systems running X. Further details can be found in topic number 737-35207
    *Quake 3 Arena (demo): Segmentation faults no longer occur when attempting to play the game. Further details can be found in topic number 737-35206
    *Quake3: Corruption is no longer noticed when changing the display resolution when the game is running. Further details can be found in topic number 737-35209
    *SECAM, NTSC or PAL signal changes when using aticonfig or Catalyst Control Center and now gets applied to the TV display output. Further details can be found in topic number 737-34297
    *Running X server without a window manager no longer results in the X server flashing green for a moment, going black, and the computer becoming unresponsive. Further details can be found in topic number 737-34299
    *Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-34301
    *Clock Gating is now supported and enable under the Linux operating system. Further details can be found in topic number 737-35191
    *The desktop background color is no longer displayed incorrectly when using xcommgr. Further details can be found in topic number 737-35192
    *Using the wrong delimiter in aticonfig --set-dispattrib=<disp>,<attr>, <value> no longer results in a segmentation fault. Further details can be found in topic number 737-35194
    *Audio out is now functioning after the installation of the ATI graphics drivers for Ubuntu 7.10. Further details can be found in topic number 737-35196
    *Bandwidth corruption is no longer noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
    *Playing a video clip using mplayer with the Xv extension enabled no longer results in an error indicating that Xv could not find a free Xv port. Further details can be found in topic number 737-35198
    *Corruption is no longer noticed when enabling Big Desktop on systems containing an ATI FireGL X1 series of product and running X. Further details can be found in topic number 737-35199
    *Running the X server generations test no longer results in the operating system failing to respond or a Kernel panic to occur after first server generation on SuSE 10.3 64 bit. Further details can be found in topic number 737-35200
    *Attempting to resize a 2D application window no longer results in poor performance being noticed when composing is enabled. Further details can be found in topic number 737-35201
    *Screen flicker is no longer noticed after running amdcccle in X. Further details can be found in topic number 737-35202
    *Corruption is no longer noticed when connecting a DFP display device to a system running X after setting the TV mode to 1080i. Further details can be found in topic number 737-35203
    *Glxgears corruption is no longer noticed in big desktop mode. Further details can be found in topic number 737-35204
    *Starting glxgears and/or fgl_glxgears no longer results in the gears failing to render on SuSE 10.2 x86_64. Further details can be found in topic number 737-35205
    *FGL_GLXGEARS or GLXGEARS: X no longer fails to respond when launching either of the applications. Further details can be found in topic number 737-35210
    Known Issues
    The following section provides a brief description of known issues associated with the latest version of ATI Catalyst™ Linux software suite. These issues include:
    *DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-35219
    *Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-29578
    *Bandwidth corruption may be noticed when setting the desktop resolution to 2048x1536 on systems containing an ATI *Radeon HD 3200 series of product. Further details can be found in topic number 737-33499
    *Connecting a CRT display device to a system containing an ATI Mobility Radeon X1600 product may result in the display device flashing multiple times or failing to display an image when attempting to launch the Catalyst Control Center. Further details can be found in topic number 737-34300
    *DiscoveryStudio1.7: The print preview and save as functions may fail to work properly. Further details can be found in topic number 737-34278
    *Setting the Overscan to an invalid value may result in segmentation faults. Further details can be found in topic number 737-35211
    *An incorrect error message may be returned when applying an unsupported TV geometry in a console terminal. Further details can be found in topic number 737-35212
    *Desktop corruption may be noticed when dragging the overlay/video when using dual-display mode. Further details can be found in topic number 737-35213
    *An X segmentation fault may occur when launching SUZI/textured video. Further details can be found in topic number 737-35214
    *Creating two successive connections may result in direct GL context to fail. Further details can be found in topic number 737-35215
    *Moving the mouse or tapping a key may fail to close an OpenGL screen-saver and bring the user back to the x desktop. Further details can be found in topic number 737-35216
    *The X Server may fail to reset clearly when AIGLX is enabled. Further details can be found in topic number 737-35217
    *Opening a terminal and running semiautomated DPPT tests via lnxtest.sh may result in the operating system failing to respond. Further details can be found in topic number 737-35218
    Last edited by Zibi1981 (2008-06-19 15:42:23)

  • Satellite L350D-20D: ATI radeon 3100 with Ati Catalyst Control

    i was instaled on my Satelite L350D 20-D graphic drivers from Toshiba website
    But after instalaton i dont have Ati Catalyst Control Center i have ion my Program Files some Foler with instalation but this is some 0.2 MB ,,,
    i have now this drivers :
    http://driverscollection.com/?H=Radeon%20HD%203100&By=ATI&SS=Windows%20XP
    Manufacturer:ATI
    Hardware:ATI Radeon HD 3100
    Software type:Catalyst Software Suite
    Version:11.8
    File Size:51.38Mb (53881048 bytes)
    Released:16 Aug 2011
    Uploaded:27 Aug 2011
    Views:159
    Downloads:55
    System:
    Windows XPWindows XP Media Center
    Description:Catalyst Software Suite for ATI Radeon HD 3100
    Package Includes:
    Display Driver
    OpenCL Driver
    ATI Integrated Driver
    Catalyst Control Center
    Download ATI Radeon HD 3100 Catalyst Software Suite v.11.8
    im not sure if its not t o `BIG` driver for this graph card..
    cus its for Ati Radeon HD 3100 and in my Toshiba L350D 20-D i have Ati Radeon 3100 ....

    Hi
    Here you can download the latest Catalyst software:
    http://www.amd.com/us/products/technologies/amd-catalyst/Pages/catalyst.aspx

  • ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

    I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
    And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
    Thank you in advance.

    Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

Maybe you are looking for