Ati drivers doesn`t work correctly

I have a trouble setting up ATI RadeonHD 3470 crossfire properly. I know that the support for the proprietary drivers was dropped in Arch a long time ago(and I think this was a good solution since they were no good anyways) and I've been hearing really great stuff about the progress in the development of the free ati driver so I installed it following the instructions in the wiki. After I started X with it, the resolution was perfect, but everything was exceptionally slow, even browsing with firefox - it seems as if there is no 2d acceleration at all. I tried a more recent build of the driver (6.13 from git), but the problem remained. I'm probably missing something. Does anybody have an idea what that might be? Thanks in advance for your time and help.

X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64
Current Operating System: Linux igoshin 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 23 19:43:46 CET 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/1e965387-0f8f-440b-976d-71a605bcfaa1 ro
Build Date: 17 February 2010 07:57:38PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 5 00:10:21 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c0fa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI: (0:1:5:0) 1002:9612:1734:113b ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xa0000000/268435456, 0x9fdf0000/65536, 0x9fe00000/1048576, I/O @ 0x00009000/256
(--) PCI:*(0:2:0:0) 1002:95c4:1734:113b ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xc0000000/536870912, 0x9fbf0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 6.12.191
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 6.12.191
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) Primary Device is: PCI 02@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(II) RADEON(0): TOTO SAYS 000000009fbf0000
(II) RADEON(0): MMIO registers at 0x000000009fbf0000: size 64KB
(II) RADEON(0): PCI bus 2 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "DRI" "on"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (ChipID = 0x95c4)
(--) RADEON(0): Linear framebuffer at 0x00000000c0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1734 SubsystemID: 0x113b
IOBaseAddress: 0xa000
Filename: br29133.001
BIOS Bootup Message:
M82ME A11 FSC Amilo P15 GDDR2 32Mx16 256M 400m/500e
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 680000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:02:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=262144K, accessible=524288K (PCI BAR=524288K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(EE) RADEON(0): mask: 3
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 32, HSyncWidth: 32
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Output LVDS using monitor section Configured Monitor
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e60
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e20
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(**) RADEON(0): Display dimensions: (330, 210) mm
(**) RADEON(0): DPI set to (98, 154)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit c0000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
mc fb loc is 00df00c0
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x20000000
(II) RADEON(0): MC_FB_LOCATION : 0x00df00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
(II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
(II) RADEON(0): Will use 120832 kb for textures at offset 0x012c8000
(II) RADEON(0): Will use 122016 kb for X Server offscreen at offset 0x088c8000
(WW) RADEON(0): Direct rendering is not supported when VGA arb is necessary for the device
(EE) RADEON(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00df00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output DIG0 transmitter setup success
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC memreq 0 success
Disable CRTC 0 success
Mode 1280x800 - 1408 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00df00c0 0x00df00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
Picked PLL 0
before 6890
after 6890
best_freq: 68929
best_feedback_div: 86
best_frac_feedback_div: 8
best_ref_div: 2
best_post_div: 17
(II) RADEON(0): crtc(0) Clock: mode 68900, PLL 689290
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x56(86), fracfbdiv 8, pdiv 17
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output DIG1 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC 0 success
Enable CRTC memreq 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC memreq 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Found 2 VGA devices: arbiter wrapping enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device A4Tech PS/2+USB Mouse
(**) A4Tech PS/2+USB Mouse: always reports core events
(**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event11"
(II) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
(II) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
(II) A4Tech PS/2+USB Mouse: Found relative axes
(II) A4Tech PS/2+USB Mouse: Found x and y relative axes
(II) A4Tech PS/2+USB Mouse: Configuring as mouse
(**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
(**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
(**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
(**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
(II) A4Tech PS/2+USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5121
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1312 1344 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 1401 Serial#: 0
(II) RADEON(0): Year: 2008 Week: 30
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.595 redY: 0.343 greenX: 0.317 greenY: 0.559
(II) RADEON(0): blueX: 0.156 blueY: 0.132 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1312 h_sync_end 1344 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CPT
(II) RADEON(0): CLAA154WB03A
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e14011400000000
(II) RADEON(0): 1e120103802115780a743d9857518f28
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010302020
(II) RADEON(0): 13004bcf100000190000000f00202020
(II) RADEON(0): 2020202020206e050f00000000fe0043
(II) RADEON(0): 50540a202020202020202020000000fe
(II) RADEON(0): 00434c41413135345742303341200056
(II) RADEON(0): EDID vendor "CPT", prod id 5121
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0

Similar Messages

  • ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

    iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

    Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
    For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
    System:
    Windows 7 Ultimate x64
    iTunes 10.4
    ATI 5750 video card

  • Game Center doesn't work correctly

    Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
    It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
    Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
    The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
    I've restored my device several times, but it didn't help.
    How to solve it?

    I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
    There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
    Other than waiting for Apple to fix it I don't think there is a solution.

  • AddChild doesn't work correctly in 11.9

    comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows  7 IE debug version and I see no script errors
    Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
    (Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

    Could you please open a new bug report on this over at bugbase.adobe.com?  When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally.  If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]). 
    Once added, please post back with the bug URL and I'll investigate internally.
     

  • IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

    iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

    It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
    report to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • After upgrade my iphone 4 to IOS6, sound doesn't work correctly

    After upgrade my iphone 4 to IOS6, sound doesn't work correctly.
    During a phone call, there is no sound. But if I turn on the speaker, there is sound. itune works fine since it's on the speaker.

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Translation from CS5 to Cloud doesn't  work correct, navi and linked images are broken.

    Translation from CS5 to Cloud doesn't  work correct, <navi> and linked images are broken.
    The data of CS5 was created at another PC. I installed Cloud version into two different PC. One has had the site data since dreamweaver CS5 and it works correct in Cloud version. Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.

    Another PC got the site data from remote server and it doesn't work correct. <navi> and linked image are broken.
    This implies your site is not properly defined in DW.  Go to Site > Manage Sites.
    Or simply go to your other installation of DW and export the site definition file from Manage Sites.
    Save it to a flash stick or other removable drive.  Then import the STE file into your 2nd installation of  DW.
    Nancy O.

  • [svn] 4028: Bug: Draining of buffered messages doesn' t work correctly with long-polling.

    Revision: 4028
    Author: [email protected]
    Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
    Log Message:
    Bug: Draining of buffered messages doesn't work correctly with long-polling.
    QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
    Doc: No
    Checkintests: Pass.
    Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    Sounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems.  http://wiki.archlinux.org/index.php/CUPS
    The first section describes how to troubleshoot CUPS and printing problems.
    I've also found a few other posts and links that may help.
    http://hplipopensource.com/hplip-web/mo … eries.html
    http://ubuntuforums.org/showthread.php?t=419163
    Hope this helps!

  • How can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    how can I avoid duplicates on contacts and how do I get contacts created on iPhone/ipad synchronized on my mac? so far it doesn't work correctly, just sometimes. same for icalendar

    On your Mac, for duplicates, switching Contacts off then back on in System Preferences > iCloud may prevent duplicates.
    On the iPhone / iPad tap Settings > iCloud. Make sure Contacts and Calendars are swtiched on.
    Try restarting your Mac and your iOS devices when items won't sync as they should.
    To restart an iOS device:  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • ASR1002 - For DNS it seems that NAT doesn't work correctly

    Hi Folks,
    For DNS it seems that NAT doesn't work correctly
    The ASR 1002 works as a NAT-Router. But for DNS it seems that NAT doesn't work correctly.
    All DNS packets with a frame size greater than 512byte are not processed (they donїt arrive at the DNS Server), but we can't verify if they are dropped or just not processed.

    Sorry guys its everytime*

  • Link on my website doesn't work correctly on my iMac. It works correctly on Safari, and both browsers on my laptop.

    Link on my website doesn't work correctly on my iMac. It works okay when using Safari. It also works correctly on my laptop using either browser.

    We worked out my problem. My solution turned out to be: Firefox Preferences/Applications. Scroll down until you find "Portable Document Format (application)", click on it and use the dropdown menu to the right and changed "Save file" to "Use Adobe Acrobat Pro (default). I had trouble at first finding if the listing was under Adobe, Acrobat, or what so I used the search feature and found it immediately.
    Hope this helps.

  • Portege Z930 - Display Driver doesn't work correctly

    Hello,
    we have a Portege Z930 with Windows 7 64 bit in use where the Intel Display Driver seem to work incorrectly.
    First problem is the slow presentation on display - if we open a picture (simple JPG) and move the window, the window frame will break during the move and be shown very bizarre.
    Next we installed a dynadock U3.0 docking station for using two external displays additionally. This works even worse. For the docking station we used the driver from the CD included on delivery, and we connect it over an USB 3.0 slot.
    On booting switching onto the 2 displays instead of the internal notebook display doesn't work - so we use the workaround of using an extended desktop over all 3 displays (2 externals and the internal notebook display as third).
    In Internet Explorer we had to switch off GPU Rendering and use Software Rendering instead because otherwise we observed critical misfunctions on the external displays (having 2 windows open the display froze or couldn't show moving windows). Nevertheless the display is not satisfactioning.
    We already tried 3 different versions of the recommendet Intel Driver which is also offered by Toshiba for download; we loaded it there and also 2 more versions (one newer, one older) from Intel directly.
    So how can we get that working correctly?
    Thanks in advance and regards,
    N. Cochems

    Most importantly. make sure you have Win7 Service Pack 1 installed. New notebooks have problems running in win7 RTM (no service packs).
    Sounds like Windows is using the standard VGA driver instead of the Intel driver. Uninstall all the display drivers from Control Panel->Programs and Features then go to the Toshiba website and install the Intel Chipset Utility then the Intel Display Driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new DisplayLink v7.xx driver fixes many problems found in the v6.xx drivers.
    Double check that the Intel drivers are installed correctly in Device Manager.

  • Ati drivers no longer work after upgrade

    I was trying to mount a vfat partition the other day, to copy files from a friends USB drive. It would not mount no matter what I did. I had found out that for some reason, the last kernel that I updated to did not have the proper character set enabled in it before it was compiled. I noticed there was a new kernel, and decided what the heck, and gave it the old pacman -Syu
    I rebooted after this only to find my x server now crashes. So I did some research and it seems that there is a lot of complaints about this new xorg 1.5. So I thought about downgrading, but decided against it. I did a hwd -x, and copied over the xorg.conf.vesa, and restarted X. It worked. I then tried with the ati driver and it doesnt work.
    So I am using x, with the vesa driver. And I can view videos (these were the files I wanted to copy from my friends USB drive. Although I can now mount it, and have copied them fine.)
    Here is some output
    [shawn@lungbox ~]$ lspci | grep -i vga
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
    [shawn@lungbox ~]$ pacman -Q xf86-video-ati
    xf86-video-ati 6.9.0-5
    [shawn@lungbox ~]$ cat /etc/X11/xorg.conf.ati
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    # PS/2 Mouse not detected
    # Serial Mouse not detected
    InputDevice "USB Mouse" "CorePointer"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "False"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    # Load "synaptics"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "ati"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    BTW, when the xserver fails, I select yes to see the output, and it skips the output and tells me to re-enable x when I have configured it properly. So I cant seem to get you that information.
    Side note: I can also not upgrade gnome-terminal. I get this error:
    [root@lungbox shawn]# pacman -S gnome-terminal
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): gnome-terminal-2.24.2-1
    Total Download Size: 0.00 MB
    Total Installed Size: 9.58 MB
    Proceed with installation? [Y/n] y
    checking package integrity...
    (1/1) checking for file conflicts [#####################] 100%
    error: could not prepare transaction
    error: failed to commit transaction (conflicting files)
    gnome-terminal: /usr/share/gnome-terminal/encodings-dialog.ui exists in filesystem
    gnome-terminal: /usr/share/gnome-terminal/keybinding-editor.ui exists in filesystem
    gnome-terminal: /usr/share/gnome-terminal/profile-manager.ui exists in filesystem
    gnome-terminal: /usr/share/gnome-terminal/profile-new-dialog.ui exists in filesystem
    gnome-terminal: /usr/share/gnome-terminal/profile-preferences.ui exists in filesystem
    gnome-terminal: /usr/share/gnome-terminal/skey-challenge.ui exists in filesystem
    gnome-terminal: /usr/share/gnome-terminal/terminal.xml exists in filesystem
    gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/figures/gnome-terminal-default.png exists in filesystem
    gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/figures/gnome-terminal-tabbed.png exists in filesystem
    gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/gnome-terminal.xml exists in filesystem
    gnome-terminal: /usr/share/locale/kn/LC_MESSAGES/gnome-terminal.mo exists in filesystem
    gnome-terminal: /usr/share/locale/mai/LC_MESSAGES/gnome-terminal.mo exists in filesystem
    gnome-terminal: /usr/share/locale/ps/LC_MESSAGES/gnome-terminal.mo exists in filesystem
    gnome-terminal: /usr/share/locale/sr@latin/LC_MESSAGES/gnome-terminal.mo exists in filesystem
    gnome-terminal: /usr/share/omf/gnome-terminal/gnome-terminal-cs.omf exists in filesystem
    Errors occurred, no packages were upgraded.
    I am not impressed by the update problems I have been having recently. I've been using arch for a while now, and everything has gone smooth exept for the last 2 months, I have had about 5 seperate issues. Not sure if im the only one feeling this. Might be my set up who knows.

    The xorg.conf.ati was renamed to xorg.conf. I had named it back when it didnt work. And renamed xorg.conf.vesa to xorg.conf to have a usable x session.
    Here is my output for Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux lungbox 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 26 22:52:03 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "USB Mouse"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AutoAddDevices" "False"
    (**) Not automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/PEX" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
    (WW) The directory "/usr/share/fonts/ttf/western" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
    Entry deleted from font path.
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/75dpi,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/100dpi,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100, Mem @ 0x40000000/0, 0x41000000/0, I/O @ 0x00002000/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (WW) Warning, couldn't open module type1
    (II) UnloadModule: "type1"
    (EE) Failed to load module "type1" (module does not exist, 0)
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (WW) Warning, couldn't open module record
    (II) UnloadModule: "record"
    (EE) Failed to load module "record" (module does not exist, 0)
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 6.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "mach64"
    (WW) Warning, couldn't open module mach64
    (II) UnloadModule: "mach64"
    (EE) Failed to load module "mach64" (module does not exist, 0)
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (EE) No drivers available.
    Fatal server error:
    no screens found
    I have tried to remove the xorg.conf and retry the x server. It opens but I have no keyboard or mouse control and the resolution is incredibly small (640.480?). I can not log in, or change to any tty because of a lack of keyboard, and I am stuck rebooting my computer, which results in a fsck and all that good stuff.
    As for the gnome-terminal problem, I managed t get around it by removing the package, updating my system, and reinstalling gnome-terminal. I wanted to try that since there were new ATI drivers waiting to be installed. But the new ATI drivers do not seem to do me justice. :S
    And sorry for not getting back right away. I was just using the VESA drivers to get me by. I had a lot of work to do before the holidays. And now im back on it.

  • Outlook advanced search & Exchange 2013 - "Sent to...." field doesn't work correctly in online mode?

    Hello,<o:p></o:p>
    We've come across what seems to be a problem with advanced find in Outlook in online mode, when used with Exchange 2013. 
    Using the "Messages" tab of "Advanced Find", anything typed into the "Sent to...." field produces no search results.  If the field is populated by clicking
    "Sent to..." and selecting a name from a contact list or GAL, results are returned. 
    eg. 
    Sent items contains messages to "Charlie" who has the email address
    [email protected] and sender is
    "Dave" who has the email address
    [email protected] 
    Entering "charlie" or
    [email protected], (or any previously acceptable partial term such as "charl" or "@contoso.com") into the "Sent to"" field produces no results.  If the user exists in a contact
    list and is selected from it, the search works fine.  The same is true searching the inbox, using the local user's id of "Dave" or
    [email protected]
    We've confirmed this issue occurs at four client's sites, plus our own internal Exchange 2013 CU3 system.  Four of the sites have been transitioned from Exchange 2010, the fifth was a completely new installation.  The problem occurs with Outlook
    2007, 2010 and 2013. 
    This works fine in cached mode (not a solution as our clients are predominantly Citrix/RDS).  Exchange search doesn't report any issues and the index states are all "healthy",
    we've also tried rebuilding the indexes with no improvement.
    Any ideas would be appreciated, or even if someone else can confirm they see the same thing.
    Thanks.

    Hi Winnie,
    Thanks for your reply, and I'm sorry I've not responded earlier.  While this problem is one that's annoying several of our clients, and while I have been doing further testing and investigation, it's had to take a back seat to other more pressing issues
    until now.
    OWA search works fine, as does using "From:" in instant search, and the "From" query on the Advanced tab in Advanced Find.  The search services have been restarted, indexing state and copy status etc are all healthy, the indexes
    have been rebuilt/reseeded, and I've gone through the diagnostics again.  Nothing is logged in event viewer, and the only error that comes up when checking failed index docs for a user are for unsupported format handlers (.png etc).
    The issue seems purely to be with the "Sent to..." field on the Messages tab, it's as if it gets completely ignored.  The search returns instantly with "There are no items to show in this view".  Just to make sure I wasn't losing
    my marbles, I've compared searches on Exchange 2007 and 2010, and on those I can enter as little as a single letter or email domain and receive the expected results.  On 2013 I get nothing whatsoever whatever I enter, unless I pick an address from a contact
    list.
    At this point, I thought that since Office 365 is Exchange 2013 based it'd be worth testing that, and sure enough I got exactly the same issue.  I setup an Office 365/Outlook 2010 profile on a machine that is currently in an existing Exchange 2010
    environment where search works correctly, searching Office 365 doesn't work on that either.
    EDIT - Ignore this bit, a fresh install of Windows 7 and Office 2010 doesn't work with Office 365 either.  I am exploring another avenue.  I setup a fresh Windows 7 VM, installed Office 2010 and connected that to Office 365, search worked fine,
    so I'm now looking into what the difference with that VM and the servers and workstations out "in the wild" could be.  For example, the test VM isn't on a domain, it's not fully patched, it has no additional software installed etc.  Outside
    of Microsoft applications and operating systems and having similar configurations, I haven't isolated a common link across all of our client sites that are affected, there's no single 3rd party application or anti-virus solution in place at all of them for
    example. 
    I'll update with any findings, but if you or anyone else has any idea in the meantime I'd be grateful for your input.
    Regards.

  • Touchpad doesn't work correctly

    My touchpad isn't working correctly anymore.
    i don't know if this is due to hardware or software but i will explain the problem and maybe someone can help me.
    the pad is working correctly, so i can move the mouse, but when i try to push the touch pad it doesn't work anymore. i've already activated the touch option so that i can still whithout a usb mouse.
    But please someone help me

    If the click function is working with the tap, but not by physically clicking the touch pad, it is more than likely a hardware failure. Take it to the apple store for a diagnosis.

Maybe you are looking for