ATI HD 3870 drivers

Hello, where can I find these? I looked on ATI / AMD site and they don't have them there anymore. Or I just can't find them there.
What happened was I upgraded to 10.6.5 a few weeks back. All was well. My ATI HD 3870 and my NVidia GeForce 7300GT were working great. Well, I was working in ZBrush and getting bad artifacts on my Nvidia screen and my ATI screen. Someone mentioned upgrading the drivers and I found on the internet latest drivers for ATI OS X 10.6.xx
I installed them and when I went to re-boot, my screens all went black. Then I zapped the pram and reset the Mac. Ran repair disc permissions from the DVD. Re started and now my screens are blue. The login screen pops up but when I enter my password. It doesn't recognize it. So, I reset my password from the DVD. And still I get stuck at the login page.
Any help much appreciated. Luckily I kept 10.4.11 on another drive!

Hi,
This is odd.. Have you tried re-installing Snow Leopard from the DVD? Remember, the archive and install feature in Leopard is no longer in Snow Leopard... if you boot up the Snow Leopard DVD it will only overwrite the current system folder with a fresh new system folder + apps.. Your existing 3rd party applications will NOT be affected.. Try that, and report back.
I have a feeling the windowserver.plist is corrupt and you might need to re-install SL from the DVD.. Remember, it won't erase your hard drive.. it will only overwrite the system folder and original software that came with your computer... but any service updates you applied(10.6.5,10.6.6) will resort back to the original which will require you to download the updates.

Similar Messages

  • ATI  HD 3870 under OS 10.6.2

    Does anyone know if 10.6.2 includes drivers for the ATI HD 3870 graphics card? I have seen some posts that imply that is so, but want to be sure before I mess things up installing the drivers that came with the card. ATI site is no help, they're still on 10.5.
    Thanks...

    Once there has been an update to Mac OS X (as in 10.5.6 or something) there shouldn't be any need and you don't want to install older driver; and you don't want to install drivers from Leopard.
    Can't be said enough: backup; and I'd do a clean install - format a drive and then import or migrate your old settings.

  • ATI HD 3870 and gaming video corruption after 10.5.6 update

    I have an early 2006 MacPro 8 core in which I replaced the factory ATI X1900 graphics card with the highly recommended ATI HD 3870 card. The upgrade went smoothly and now I can play Call of Duty 2 for Mac on my 1920 x 1200 display at the highest quality of detail and shading with no problems.
    After upgrading my OSX to 10.5.6, I started having random video corruption while playing COD2. It appears as random magenta, cyan or green flashes with a screen-like texture in various parts of the display. It seems totally random. After speaking with ATI tech support and the great guys at Other World Computing where I bought the card, the determination was that the card was the problem. I sent it into ATI for a warranty repair or replacement. While waiting, I borrowed the same card from a friend and installed it. The same problem occurred.
    I think the issue now tracks back to the 10.5.6 upgrade which according to Apple provided updates to the video drivers for ATI cards. Now I don't know how to go back to the previous drivers. I checked ATI's web site and there are no drivers available for download for Leopard.
    Any suggestions?
    Thanks.
    Bud James

    Backup - always - before you apply updates. Start using SuperDuper.
    Wait for 10.5.7.
    The first 8-core was 3GHz and came in March 2007. But you had the X1900 so that says it is pre-2008 (most that say "early 200x" mean Early 2008 Mac Pro).
    Drivers are part of OS X bundle, there is no discreet driver package.
    If you don't have a backup, make one, and then you are faced with fresh install or archive and install, and you may need 10.5.2 DVD (with the 8800 you can't boot from a system w/o getting a panic if it is lower than 10.5.2).

  • ATI Radeon 3870 for photomation pan/scan/zoom

    Hi all,
    I'm thinking about upgrading to the ATI Radeon 3870, but before I commit I would like to know if it will help with faster renders on the photo pan/scan/zoom (i.e. Ken Burns) style moves that make up the bulk of my work. I know it's good for Motion, but what I'm really after is speed on FCP renders for photos that have keyframe animated scale, rotation, and position parameters, as well as basic filters and transitions.
    Thanks!

    I don't know what your workflow is, but I've animated hundreds of photos in Motion before without problem. And if I'm dealing with a long sequence (one was about 25 minutes long), I simply break it up into manageable pieces of 4-5 minutes long and reassemble in FCP. I could do all that and still be finished before I had the chance to animate a third of the photos in FCP alone.
    To me, speed is a primary concern because obviously time is money. But as I said, I don't know how your workflow differs.
    Andy

  • ATI Radeon 8750M drivers

    I installed windows 7 32 bit into my Probook 450 GO i5 HoU99 and  I could not find any ATI Radeon 8750M drivers to it. Can you help me please.

    Hi:
    Below is the link to the W7 32 bit AMD graphics driver you need.
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&sp...

  • TA48312 ati radeon 5770 drivers

    ati radeon 5770 drivers i need the drivers for this not working in my mac 3,1 mac pro
    microcenter said it would work

    This discussion is very helpful to me, but I still have questions. I have a similar configuration:
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 3 GB
    Bus Speed: 1.33 GHz
    I want to upgrade my graphics card so my kids can play a game I bought them via Steam. Their website tells me I need "NVIDIA GeForce 8 or higher, or ATI X1600 or higher." Does the ATI Radeon 5770 fit in that range? If not, is there another card compatible with my MacPro that does? Thanks...

  • Windows 8.1 ATI Radeon 8750M Drivers

    I installed windows 8.1 on my Probook 450 G1 and  I could not find any ATI Radeon 8750M drivers to it. The windows 8 drivers are not working properly in windows 8.1.
    I found another read-only topic with the same name (and post) and a very promising solution, but the link to said solution is down. Could it please be reuploaded?
    This question was solved.
    View Solution.

    Hi:
    Please see if this driver works for you...
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...

  • Windows 8.1 ATI Radeon 8750M Drivers For Probook 450 G1

    I installed windows 8.1 into my Probook 450 G1 and I could not find any ATI Radeon 8750M drivers to it. The windows 8 drivers are not working properly in windows 8.1 .
    This question was solved.
    View Solution.

    Try drivers from here:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405422&spf_p... - Graphics
    ELSE
    Try installing HP Support Assistant which will automatically download and install drivers/updates:
    HPSA Link:
    http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Is it possible to have multiple "ATI HD 3870" in a macpro?

    is it possible to have multiple "ATI HD 3870" in a macpro?
    thinking of getting me a mp but want more videocards with more vram (more more more)
    now there is the option to get 4 ati2600 can i also install 4 3870's?
    -mj

    Power limit on the video card power supply is 350 watts. A 3870's maximum power consumption is 170 watts.
    There are slots for up to four video cards. That's all. If the four cards don't require more power than the power supply can provide, then you could install four cards. For example you could install four 7300s since each card only requires 50 watts..
    As I said more video cards just gets you more monitors. There is not improvement in video performance nor amount of video RAM.

  • Arch64 ati radeon 3870 radeonhd driver. Problem with xorg.conf.

    I've got a small problem with my xorg. I won't hide that i'm not a xorg nerd and i've used the automatic xorg tool to generate the xorg.conf. After starting X, the screen goes black and then after ~5 seconds  montior switches to power-saving mode.
    So here we go.
    That's xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "record"
    Load "dri2"
    Load "dbe"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon HD 3870"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "AccelMethod" # [<str>]
    #Option "offscreensize" # [<str>]
    #Option "SWcursor" # [<bool>]
    #Option "ignoreconnector" # [<str>]
    #Option "forcereduced" # [<bool>]
    #Option "forcedpi" # <i>
    #Option "useconfiguredmonitor" # [<bool>]
    #Option "HPD" # <str>
    #Option "NoRandr" # [<bool>]
    #Option "RROutputOrder" # [<str>]
    #Option "DRI" # [<bool>]
    #Option "TVMode" # [<str>]
    #Option "ScaleType" # [<str>]
    #Option "UseAtomBIOS" # [<bool>]
    #Option "AtomBIOS" # [<str>]
    #Option "UnverifiedFeatures" # [<bool>]
    #Option "Audio" # [<bool>]
    #Option "HDMI" # [<str>]
    #Option "COHERENT" # [<str>]
    Identifier "Card1"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon HD 3870"
    BusID "PCI:2:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    and that's the log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:31:45 2009
    (++) Using config file: "xorg.conf.new"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Screen "Screen1" (1)
    (**) | |-->Monitor "Monitor1"
    (**) | |-->Device "Card1"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeonhd"
    (II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
    (II) Module radeonhd: vendor="AMD GPG"
    compiled for 1.6.0, module version = 1.2.5
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
    RV505 : Radeon X1550, X1550 64bit.
    RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
    RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
    R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
    RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
    RV535 : Radeon X1300, X1650.
    RV550 : Radeon X2300 HD.
    RV560 : Radeon X1650.
    RV570 : Radeon X1950, X1950 GT; FireGL V7400.
    R580 : Radeon X1900, X1950; AMD Stream Processor.
    R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
    RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
    RV620 : Radeon HD 3450, HD 3470.
    RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
    FireGL V3600/V5600.
    RV635 : Radeon HD 3650, HD 3670.
    RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
    R680 : Radeon HD 3870 X2.
    M52 : Mobility Radeon X1300.
    M54 : Mobility Radeon X1400; M54-GL.
    M56 : Mobility Radeon X1600; Mobility FireGL V5200.
    M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
    M62 : Mobility Radeon X1350.
    M64 : Mobility Radeon X1450, X2300.
    M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
    M68 : Mobility Radeon X1900.
    M71 : Mobility Radeon HD 2300.
    M72 : Mobility Radeon HD 2400; Radeon E2400.
    M74 : Mobility Radeon HD 2400 XT.
    M76 : Mobility Radeon HD 2600;
    (Gemini ATI) Mobility Radeon HD 2600 XT.
    M82 : Mobility Radeon HD 3400.
    M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
    M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
    RS600 : Radeon Xpress 1200, Xpress 1250.
    RS690 : Radeon X1200, X1250, X1270.
    RS740 : RS740, RS740M.
    RS780 : Radeon HD 3100/3200/3300 Series.
    RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
    R700 : Radeon R700.
    M98 : Radeon M98 Mobility.
    RV730 : Radeon HD4670, HD4650.
    M96 : Radeon M96 Mobility.
    RV710 : Radeon HD4570, HD4350.
    (II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
    (II) Primary Device is:
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] 1 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [8] 1 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [9] 1 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [11] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [12] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [13] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    [14] 1 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [15] 1 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
    (**) RADEONHD(0): Selected ShadowFB.
    (II) RADEONHD(0): Unknown card detected: 0x9501:0x1458:0x21A4.
    If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x9501:0x1458:0x21A4: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    (--) RADEONHD(0): Detected an RV670 on an unidentified card
    (II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(0): PCIE Card Detected
    (II) RADEONHD(0): Getting BIOS copy from PCI ROM
    (II) RADEONHD(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
    IOBaseAddress: 0xa000
    Filename: Test.bin
    BIOS Bootup Message:
    GV-RX387512HP_F10
    (II) RADEONHD(0): Default Engine Clock: 825000
    (II) RADEONHD(0): Default Memory Clock: 900000
    (II) RADEONHD(0): Calling ASIC Init
    (II) RADEONHD(0): ASIC_INIT Successful
    (II) RADEONHD(0): Analog TV Default Mode: 1
    (II) RADEONHD(0): Found default TV Mode NTSC
    (II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
    (II) RADEONHD(0): Using only 262144kB of the total 524288kB.
    (--) RADEONHD(0): VideoRAM: 262144 kByte
    (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16
    (II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffc000
    (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space
    (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffc000
    (WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536854528 (size: 16384) extends beyond available framebuffer size 268435456
    (II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEONHD(0): Default Engine Clock: 825000
    (II) RADEONHD(0): Default Memory Clock: 900000
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEONHD(0): Maximum Pixel Clock: 400000
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): Direct rendering not officially supported on R600 and up
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f80
    (II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f80
    (II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) RADEONHD(0): Detected VGA mode.
    (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(0): Maximum Pixel Clock: 400000
    (II) RADEONHD(0): Reference Clock: 27000
    (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    (II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
    (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
    (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1
    (--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1
    (--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN
    (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2
    (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
    (II) RADEONHD(0): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
    (II) RADEONHD(0): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
    (II) RADEONHD(0): Output DVI-I_1/digital using monitor section Monitor0
    (II) RADEONHD(0): Output DVI-I_1/digital has no monitor section
    (II) RADEONHD(0): Output DVI-I_1/analog has no monitor section
    (II) RADEONHD(0): Output TV_7PIN_DIN has no monitor section
    (II) RADEONHD(0): Output DVI-I_2/digital has no monitor section
    (II) RADEONHD(0): Output DVI-I_2/analog has no monitor section
    (II) RADEONHD(0): TMDS A: Sensed Output: DVI
    (II) RADEONHD(0): Setting TMDS A to incoherent
    (II) RADEONHD(0): I2C device "RHD I2C line 1:E-EDID segment register" registered at address 0x60.
    (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0.
    (II) RADEONHD(0): EDID data for W2253
    (II) RADEONHD(0): Manufacturer: GSM Model: 56dc Serial#: 385315
    (II) RADEONHD(0): Year: 2009 Week: 5
    (II) RADEONHD(0): EDID Version: 1.3
    (II) RADEONHD(0): Digital Display Input
    (II) RADEONHD(0): Max Image Size [cm]: horiz.: 49 vert.: 32
    (II) RADEONHD(0): Gamma: 2.20
    (II) RADEONHD(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEONHD(0): First detailed timing is preferred mode
    (II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    (II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    (II) RADEONHD(0): Supported established timings:
    (II) RADEONHD(0): 720x400@70Hz
    (II) RADEONHD(0): 640x480@60Hz
    (II) RADEONHD(0): 640x480@75Hz
    (II) RADEONHD(0): 800x600@56Hz
    (II) RADEONHD(0): 800x600@60Hz
    (II) RADEONHD(0): 800x600@75Hz
    (II) RADEONHD(0): 832x624@75Hz
    (II) RADEONHD(0): 1024x768@60Hz
    (II) RADEONHD(0): 1024x768@75Hz
    (II) RADEONHD(0): 1280x1024@75Hz
    (II) RADEONHD(0): 1152x870@75Hz
    (II) RADEONHD(0): Manufacturer's mask: 0
    (II) RADEONHD(0): Supported standard timings:
    (II) RADEONHD(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEONHD(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
    (II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) RADEONHD(0): Supported detailed timing:
    (II) RADEONHD(0): clock: 138.5 MHz Image Size: 510 x 290 mm
    (II) RADEONHD(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    (II) RADEONHD(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    (II) RADEONHD(0): Supported detailed timing:
    (II) RADEONHD(0): clock: 148.5 MHz Image Size: 510 x 290 mm
    (II) RADEONHD(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    (II) RADEONHD(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    (II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEONHD(0): Monitor name: W2253
    (II) RADEONHD(0): EDID (in hex):
    (II) RADEONHD(0): 00ffffffffffff001e6ddc5623e10500
    (II) RADEONHD(0): 0513010380312078eaee91a3544c9926
    (II) RADEONHD(0): 0f5054a76b80b3008180818f714f0101
    (II) RADEONHD(0): 0101010101011a3680a070381f403020
    (II) RADEONHD(0): 3500fe221100001e023a801871382d40
    (II) RADEONHD(0): 582c4500fe221100001c000000fd0038
    (II) RADEONHD(0): 4b1e530f000a202020202020000000fc
    (II) RADEONHD(0): 0057323235330a202020202020200081
    (II) RADEONHD(0): EDID vendor "GSM", prod id 22236
    (II) RADEONHD(0): Using EDID range info for horizontal sync
    (II) RADEONHD(0): Using EDID range info for vertical refresh
    (II) RADEONHD(0): Printing DDC gathered Modelines:
    (II) RADEONHD(0): Modeline "1920x1080"x0.0 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync (66.6 kHz)
    (II) RADEONHD(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 -hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEONHD(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEONHD(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEONHD(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEONHD(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEONHD(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEONHD(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEONHD(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEONHD(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEONHD(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEONHD(0): Output DVI-I_1/digital connected
    (II) RADEONHD(0): Output DVI-I_1/analog disconnected
    (II) RADEONHD(0): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(0): Output DVI-I_2/digital disconnected
    (II) RADEONHD(0): Output DVI-I_2/analog disconnected
    (II) RADEONHD(0): Using exact sizes for initial modes
    (II) RADEONHD(0): Output DVI-I_1/digital using initial mode 1920x1080
    (II) RADEONHD(0): RandR 1.2 support enabled
    (==) RADEONHD(0): RGB weight 888
    (==) RADEONHD(0): Default visual is TrueColor
    (==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) RADEONHD(0): Using 1920x1920 Framebuffer with 1920 pitch
    (II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x00E10000)
    (**) RADEONHD(0): Display dimensions: (490, 320) mm
    (**) RADEONHD(0): DPI set to (99, 152)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) Loading sub module "shadow"
    (II) LoadModule: "shadow"
    (II) Loading /usr/lib/xorg/modules//libshadow.so
    (II) Module shadow: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) RADEONHD(0): Using ShadowFB
    (==) RADEONHD(1): Depth 24, (--) framebuffer bpp 32
    (**) RADEONHD(1): Selected ShadowFB.
    (II) RADEONHD(1): Unknown card detected: 0x9501:0x1458:0x21A4.
    If - and only if - your card does not work or does not work optimally
    please contact [email protected] to help rectify this.
    Use the subject: 0x9501:0x1458:0x21A4: <name of board>
    and *please* describe the problems you are seeing
    in your message.
    (--) RADEONHD(1): Detected an RV670 on an unidentified card
    (II) RADEONHD(1): Mapped IO @ 0xf5000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(1): PCIE Card Detected
    (II) RADEONHD(1): Getting BIOS copy from PCI ROM
    (II) RADEONHD(1): ATOM BIOS Rom:
    SubsystemVendorID: 0x1458 SubsystemID: 0x21a4
    IOBaseAddress: 0x0000
    Filename: Test.bin
    BIOS Bootup Message:
    GV-RX387512HP_F10
    (II) RADEONHD(1): Default Engine Clock: 825000
    (II) RADEONHD(1): Default Memory Clock: 900000
    (II) RADEONHD(1): Calling ASIC Init
    (II) RADEONHD(1): ASIC_INIT Successful
    (II) RADEONHD(1): Analog TV Default Mode: 27049664
    (II) RADEONHD(1): The detected amount of videoram exceeds the PCI BAR aperture.
    (II) RADEONHD(1): Using only 262144kB of the total 524288kB.
    (--) RADEONHD(1): VideoRAM: 262144 kByte
    (II) RADEONHD(1): Framebuffer space used by Firmware (kb): 0
    (WW) RADEONHD(1): rhdAtomGetFbBaseAndSize: AtomBIOS specified VRAM scratch space size invalid
    (II) RADEONHD(1): default to: 20480
    (II) RADEONHD(1): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEONHD(1): Default Engine Clock: 825000
    (II) RADEONHD(1): Default Memory Clock: 900000
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEONHD(1): Maximum Pixel Clock: 400000
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): Direct rendering not officially supported on R600 and up
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f90
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f90
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 0" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f94
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f94
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 1" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f98
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f98
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 2" initialized.
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask: 0x1f80
    (II) RADEONHD(1): GPIO_I2C_Clk_Mask_Shift: 0x0
    (II) RADEONHD(1): GPIO_I2C_Data_Mask: 0x1f80
    (II) RADEONHD(1): GPIO_I2C_Data_Mask_Shift: 0x8
    (II) RADEONHD(1): I2C bus "RHD I2C line 3" initialized.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) RADEONHD(1): Detected VGA mode.
    (II) RADEONHD(1): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEONHD(1): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEONHD(1): Maximum Pixel Clock: 400000
    (II) RADEONHD(1): Reference Clock: 27000
    (II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
    (II) RADEONHD(1): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
    (II) RADEONHD(1): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
    (II) RADEONHD(1): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
    (II) RADEONHD(1): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } }
    (--) RADEONHD(1): Attaching Output TMDS A to Connector DVI-I 1
    (--) RADEONHD(1): Attaching Output DAC B to Connector DVI-I 1
    (--) RADEONHD(1): Attaching Output DAC B to Connector TV 7PIN_DIN
    (--) RADEONHD(1): Attaching Output TMDS B to Connector DVI-I 2
    (--) RADEONHD(1): Attaching Output DAC A to Connector DVI-I 2
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/digital for Output TMDS A
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_1/analog for Output DAC B
    (II) RADEONHD(1): RandR: Adding RRoutput TV_7PIN_DIN for Output DAC B
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/digital for Output TMDS B
    (II) RADEONHD(1): RandR: Adding RRoutput DVI-I_2/analog for Output DAC A
    (II) RADEONHD(1): Output DVI-I_1/digital using monitor section Monitor1
    (II) RADEONHD(1): Output DVI-I_1/digital has no monitor section
    (II) RADEONHD(1): Output DVI-I_1/analog has no monitor section
    (II) RADEONHD(1): Output TV_7PIN_DIN has no monitor section
    (II) RADEONHD(1): Output DVI-I_2/digital has no monitor section
    (II) RADEONHD(1): Output DVI-I_2/analog has no monitor section
    (II) RADEONHD(1): Output DVI-I_1/digital disconnected
    (II) RADEONHD(1): Output DVI-I_1/analog disconnected
    (II) RADEONHD(1): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(1): Output DVI-I_2/digital disconnected
    (II) RADEONHD(1): Output DVI-I_2/analog disconnected
    (WW) RADEONHD(1): No outputs definitely connected, trying again...
    (II) RADEONHD(1): Output DVI-I_1/digital disconnected
    (II) RADEONHD(1): Output DVI-I_1/analog disconnected
    (II) RADEONHD(1): Output TV_7PIN_DIN disconnected
    (II) RADEONHD(1): Output DVI-I_2/digital disconnected
    (II) RADEONHD(1): Output DVI-I_2/analog disconnected
    (WW) RADEONHD(1): Unable to find initial modes
    (EE) RADEONHD(1): RandR: No valid modes. Disabling RandR support.
    (EE) RADEONHD(1): Failed to detect a connected monitor
    (II) RADEONHD(1): Destroying TMDS A
    (II) RADEONHD(1): Destroying DAC B
    (II) RADEONHD(1): Destroying TMDS B
    (II) RADEONHD(1): Destroying DAC A
    (II) RADEONHD(1): I2C bus "RHD I2C line 0" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 1" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 2" removed.
    (II) RADEONHD(1): I2C bus "RHD I2C line 3" removed.
    (II) UnloadModule: "radeonhd"
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) RADEONHD(0): Mapped IO @ 0xf7000000 to 0x7f39ca36f000 (size 0x00010000)
    (II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0x7f39b66f6000 (size 0x10000000)
    (WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
    (==) RADEONHD(0): Backing store disabled
    (==) RADEONHD(0): Silken mouse enabled
    (II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1920x1080" 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync +vsync
    None
    (II) RADEONHD(0): RHDAudioSetClock: using TMDS A as clock source with 138500 khz
    (II) RADEONHD(0): Using ACR timing N=4096 CTS=138500 for frequency 32000
    (II) RADEONHD(0): Using ACR timing N=6272 CTS=153888 for frequency 44100
    (II) RADEONHD(0): Using ACR timing N=6144 CTS=138500 for frequency 48000
    (II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
    (II) RADEONHD(0): DPMS enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) RADEONHD(0): Setting screen physical size to 510 x 290
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
    (II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) ImPS/2 Logitech Wheel Mouse: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    (II) Power Button: Close
    (II) UnloadModule: "evdev"
    Last edited by warnab (2009-10-21 18:53:12)

    i'm getting then such log
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux kasia 2.6.31-ARCH #1 SMP PREEMPT Tue Oct 13 11:33:39 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 22:35:22 2009
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (!!) More than one possible primary device found
    (--) PCI: (0:1:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xd0000000/268435456, 0xf7000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
    (--) PCI: (0:2:0:0) 1002:9501:1458:21a4 ATI Technologies Inc Radeon HD 3870 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
    Primary device is not PCI
    (==) Using default built-in configuration (21 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default vesa Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "vesa"
    (WW) Warning, couldn't open module vesa
    (II) UnloadModule: "vesa"
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (EE) No drivers available.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  • Ati Radeon 3870 installation questions.

    Hi,
    I've just ordered a Ati Radeon HD 3870 to replace my nVidia 8800gt in my 2008 2.8ghz Mac Pro.
    My question is:
    Do i use the internal Power cable that is currently plugged into the 8800gt or the cables that come with the 3870?
    I've also sold the 8800gt on ebay so does the current cable have to go with the card?
    Also do i need to install the drivers that come with the 3870 or are they in os x?
    Reading through bloggs and posts about this people also can't seem to decide weather to install the drivers first or install the card first.
    Thanks.

    Two ideas:
    Always backup before running any updates, patches, security or OS X update.
    Rerun the full combo update 10.5.6.
    At worst, do an Archive and Install, or do a fresh install on a newly formatted drive and then let it migrate your old files. Takes about an hour.
    It could be something about how you 'downgraded' the drivers over what was present already.
    Is there an ATI control panel?
    If you look around, there are reports like yours, but I saw way more last Aug/Setp time frame. Either people are living with it, or RMA'd, or gave up, but it was common. Heck, there is an active thread on Mac Pro forum @ MacRumors site.
    http://forums.macrumors.com/forumdisplay.php?f=1
    I like the 8800, it kicks in on cold boot in the AM and I don't push it, or hear it, but it does have a fan.
    I wish there was a graphic driver from ATI/Nvidia, and option to use GPU-Z along with eVGA Precision in OS X. Even Hardware Monitor and iStatPro don't report temp and fan speed and other variables. +(I never used Windows in my life until lately, and I actually have fun playing around and learning more.)+

  • ATI Radeon 3870 HD Video/X-Fi extreme Music Issu

    Here is a new problem that so far no one has any ideas about.
    Got a new Radeon 3870 HD, and it works great, BUT ever since i intalled this card i can not run 5. speaker configuration because all i get is real bad noise and distortion, sometimes the sound cutting out all together. I have tried both the vid card in both PCIe slots and X-FI in different PCI Slots but that didnt help, i have the latest driver version for everything on my system. It works fine in 2 speaker mode and 4 speaker mode. Switched to onboard sound and i have no problems running 5..... This video card also has a realtek HD audio chip on it to output sound through an HDMI cable. Im thinking htere is some sort of conflict between the HD Audio drivers and the X-Fi drivers causing this problem. Disabling this HD audio on the Vid card in device manager helps the problem a little bit, but does not fix it. I have even made sure that the X_Fi was set as default audio device.
    Here is my basic system configuration:
    Vista Ultimate 64bit, 3 GB RAM, Radeon 3870 HD Video, X-Fi extreme music, Nforce 4 x6 MoBo.
    Im thinking its a low level driver issue causing problems with the onboard HD audio on the vid card.

    lpenix wrote:
    hi i had a simular peoblem with the xfi music, and the hd 3870. i could not get my xfi to work at all, in device manager it kept saying error code 0 . in device manager there was a hd audio that i could not uninstall to save my life i thought it was the on board audio for the motherboard. but after i read your email it clicked, i uninstalled the ati drivers and rebooted the machine and bam the xfi started working, then installed the ati drivers, and i think it fixed it. i still get some strange noise sometimes, and i think it is because of the hd audio, i wish their was a way to uninstall it , if you do it in divice manager, it just comes back .
    You've got do disable your onboard sound in your bios.

  • 32 bit ATI Windows 7 drivers for the tm2t?

    Hi,
    I'm trying to get my 32-bit (I need 32-bit because I have some other devices which only have 32-bit drivers) Windows 7 (fresh install) on my tm2t to work... but HP's "32-bit" Radeon drivers located here fail to install:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=4121...
    I've even tried the older version and it doesn't work as well. Strangely in the older version is a PDF document that seems to indicate that HP engineering has tested and delivered both the 64 and 32 bit versions...
    Video Driver Release HP LUKE SG 1.0 M93
    Packaging Version 8.672.4-091125a-092132C-HP
    0OS Supported WIN7 32 & 64
    Certification Status WHQLCERTIFIED
    Significant file
    (version)
    ATIKMDAG.SYS
    (8.01.01.973)
    LIST OF FUNCTIONAL CHANGES and BUG FIXES (includes all OTS, EPR and ECR)
    Packaging Version OTS/
    EPR/
    ECR/
    others
    Description
    8.672.4-091125a
    (BR No. – 092132)
    N/A
    N/A
    N/A
    • Updated to the latest base build 8.672.4 RC3.
    • Intel Driver Version 8.15.10.1892.
    • WHQL CERTIFIED
    KEY KNOWN ISSUES OR MISSING FUNCTIONALITY
    Issue Comments
    SETUP ASIC IDs ATI Mobility Radeon HD 4550 (9555)
    I've contacted support and they have tried to escalate this for me, but since then there hasn't been any updates since, so I thought I would try this channel as well. I'm hoping someone else from HP is reading this and will help me out.
    BTW this isn't a new problem. I wished I had known it existed before and perhaps I would have avoided the tm2t and went for the X200t as has this other person (it seems he gave up on HP and returned the tm2t... so HP this is affecting your sales)...
    http://forum.tabletpcreview.com/hp-touchsmart-tm2-wacom/31065-32-bit-windows-7-ati-driver.html
    howard.

    Hi,
    For those who are in the same boat as me (and having NO follow up support from HP   ) Here is a tip, download and install the most recent 32 bit Vista/Win7 ATI Mobility drivers. This current version does (finally!) have the support for the Radeon HD 4550 (9555). Here's the link:
    https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/mobile/10-7_mobility_vista_win7_32_dd_cc...
    However this is just a partial fix. The switchable graphics does not work since this is the generic driver set from ATI. If anyone has a clue on how to hack/install the required stuff in please post here! Otherwise we'll need to wait on HP to provide this. HELLO HP?!

  • I want to upgrade my Mac Pro video card. I am using a mac quad core 2.7 GHz 8 megs of ram and an ATI Radeon 3870. Where do I start?

    I am using a mac pro with a 2.7 GHz processor 8 gigs of ram and a Radeon HD 3870 video card with 512 megs of vram.
    I want to upgrade to 1 gig of vram if possible.
    Can anyone tell me where I can begin looking, what brand to buy, and what options I have?
    I want to be able to use the Element 3D plug in After Effects.
    Also, would I need to upgrade my operating system?
    Thanks,
    Faucheux

    Shop for them at the Apple Online Store. I would suggest the ATI 5770 or 5870 or one of the new Nvidia GTX models - 650 Ti, 660, or 680.
    Note that unless your Mac Pro has PCIe 2.0 slots you should stick with the ATI 5770.

  • ATI Prop. Drivers - config problem:

    Hey all,
    First off, I'm a new Arch user, coming off a basic Gentoo install - like the forums here - everyone seems very helpful!
    Pleased with how setting up Arch is going - basic desktop install.  I'm having problems though with the ATI drivers.  I'm trying to get the proprietary driverrs working, and having problems running the aticonfig program.  Here's the problem:
    [root@myhost X11]# aticonfig --initial --input=/etc/X11/xorg.conf
    Uninitialised file found, configuring.
    Using /etc/X11/xorg.conf
    Saved back-up to /etc/X11/xorg.conf.original-0
    *** glibc detected *** aticonfig: munmap_chunk(): invalid pointer: 0xbfe10c25 ***
    Then it prints a backtrace and memory map and aborts:
    ======= Backtrace: =========
    /lib/libc.so.6[0xb7d085e6]
    aticonfig[0x805c5c7]
    aticonfig[0x805c875]
    aticonfig[0x8054528]
    aticonfig[0x804985e]
    aticonfig[0x80496cb]
    /lib/libc.so.6(__libc_start_main+0xe0)[0xb7cb8970]
    aticonfig[0x8049601]
    ======= Memory map: ========
    08048000-08067000 r-xp 00000000 08:13 111078 /usr/bin/aticonfig
    08067000-0806a000 rw-p 0001e000 08:13 111078 /usr/bin/aticonfig
    0806a000-0808b000 rw-p 0806a000 00:00 0 [heap]
    b7c95000-b7c96000 rw-p b7c95000 00:00 0
    b7c96000-b7c98000 r-xp 00000000 08:13 2366 /lib/libdl-2.6.so
    b7c98000-b7c9a000 rw-p 00001000 08:13 2366 /lib/libdl-2.6.so
    b7c9a000-b7c9e000 r-xp 00000000 08:13 32630 /usr/lib/libXdmcp.so.6.0.0
    b7c9e000-b7c9f000 rw-p 00003000 08:13 32630 /usr/lib/libXdmcp.so.6.0.0
    b7c9f000-b7ca1000 r-xp 00000000 08:13 32611 /usr/lib/libXau.so.6.0.0
    b7ca1000-b7ca2000 rw-p 00001000 08:13 32611 /usr/lib/libXau.so.6.0.0
    b7ca2000-b7ca3000 rw-p b7ca2000 00:00 0
    b7ca3000-b7dcd000 r-xp 00000000 08:13 2355 /lib/libc-2.6.so
    b7dcd000-b7dce000 r--p 0012a000 08:13 2355 /lib/libc-2.6.so
    b7dce000-b7dd0000 rw-p 0012b000 08:13 2355 /lib/libc-2.6.so
    b7dd0000-b7dd3000 rw-p b7dd0000 00:00 0
    b7dd3000-b7df5000 r-xp 00000000 08:13 2344 /lib/libm-2.6.so
    b7df5000-b7df7000 rw-p 00021000 08:13 2344 /lib/libm-2.6.so
    b7df7000-b7edf000 r-xp 00000000 08:13 32950 /usr/lib/libX11.so.6.2.0
    b7edf000-b7ee3000 rw-p 000e7000 08:13 32950 /usr/lib/libX11.so.6.2.0
    b7ee3000-b7ef0000 r-xp 00000000 08:13 33724 /usr/lib/libXext.so.6.4.0
    b7ef0000-b7ef1000 rw-p 0000c000 08:13 33724 /usr/lib/libXext.so.6.4.0
    b7ef1000-b7ef8000 r-xp 00000000 08:13 34374 /usr/lib/libXrender.so.1.3.0
    b7ef8000-b7ef9000 rw-p 00006000 08:13 34374 /usr/lib/libXrender.so.1.3.0
    b7ef9000-b7efe000 r-xp 00000000 08:13 35188 /usr/lib/libXrandr.so.2.1.0
    b7efe000-b7eff000 rw-p 00004000 08:13 35188 /usr/lib/libXrandr.so.2.1.0
    b7eff000-b7f00000 rw-p b7eff000 00:00 0
    b7f0a000-b7f14000 r-xp 00000000 08:13 8375 /usr/lib/libgcc_s.so.1
    b7f14000-b7f15000 rw-p 00009000 08:13 8375 /usr/lib/libgcc_s.so.1
    b7f15000-b7f16000 rw-p b7f15000 00:00 0
    b7f16000-b7f17000 r-xp b7f16000 00:00 0 [vdso]
    b7f17000-b7f31000 r-xp 00000000 08:13 2328 /lib/ld-2.6.so
    b7f31000-b7f32000 r--p 00019000 08:13 2328 /lib/ld-2.6.so
    b7f32000-b7f33000 rw-p 0001a000 08:13 2328 /lib/ld-2.6.so
    bfdfc000-bfe12000 rw-p bfdfc000 00:00 0 [stack]
    Aborted
    I haven't been able to find much on this invalid pointer problem - any suggestions?  Below is my original xorg.conf:
    Regards,
    Mike
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5 - 64.3
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "* Generic VESA compatible"
    Driver "vesa"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "* Generic VESA compatible"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection

    Tried hwd -xa, here's the xorg.conf it generated.  Didn't work - went to black, blank screen when it went to KDM at startup.  Thoughts?  Did I do something wrong changing the driver?  I modprobe'd fglrx, I get no output - normal?
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "PS/2 Mouse" "CorePointer"
    # Serial Mouse not detected
    # USB Mouse not detected
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    # Additional fonts: Locale, Gimp, TTF...
    FontPath "/usr/share/fonts/cyrillic"
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" ""
    Option "XkbVariant" ""
    EndSection
    Section "InputDevice"
    Identifier "Serial Mouse"
    Driver "mouse"
    Option "Protocol" "Microsoft"
    Option "Device" "/dev/ttyS0"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "PS/2 Mouse"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "true"
    Option "Emulate3Timeout" "70"
    Option "SendCoreEvents" "true"
    EndSection
    Section "InputDevice"
    Identifier "USB Mouse"
    Driver "mouse"
    Option "Device" "/dev/input/mice"
    Option "SendCoreEvents" "true"
    Option "Protocol" "IMPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Buttons" "5"
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Monitor"
    Identifier "Monitor0"
    Option "DPMS" "true"
    # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
    HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
    VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
    # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
    # Default modes distilled from
    # "VESA and Industry Standards and Guide for Computer Display Monitor
    # Timing", version 1.0, revision 0.8, adopted September 17, 1998.
    # $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
    # 640x350 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
    # 640x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
    # 720x400 @ 85Hz (VESA) hsync: 37.9kHz
    ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
    # 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
    ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    # 640x480 @ 72Hz (VESA) hsync: 37.9kHz
    ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    # 640x480 @ 75Hz (VESA) hsync: 37.5kHz
    ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    # 640x480 @ 85Hz (VESA) hsync: 43.3kHz
    ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    # 800x600 @ 56Hz (VESA) hsync: 35.2kHz
    ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    # 800x600 @ 60Hz (VESA) hsync: 37.9kHz
    ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    # 800x600 @ 72Hz (VESA) hsync: 48.1kHz
    ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    # 800x600 @ 75Hz (VESA) hsync: 46.9kHz
    ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    # 800x600 @ 85Hz (VESA) hsync: 53.7kHz
    ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    # 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
    ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
    # 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
    ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    # 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
    ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    # 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
    ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    # 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
    ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    # 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
    ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    # 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
    ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
    # 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
    ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    # 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
    ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
    ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    # 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
    ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    # 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
    ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
    ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
    ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
    ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
    ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    # 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
    ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    # 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
    ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
    # 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
    ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    # 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
    # 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
    ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    # 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
    ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
    # Additional modelines
    ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
    # Extended modelines with GTF timings
    # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
    ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
    # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
    ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
    # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
    ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
    # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
    ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
    # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
    ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
    # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
    ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
    # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
    ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
    # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
    ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
    # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
    ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
    # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
    ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
    # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
    ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
    # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
    ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
    # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
    ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
    # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
    ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
    # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
    ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
    # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
    ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
    # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
    ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
    # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
    ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
    # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
    ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
    # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
    ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
    # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
    ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
    EndSection
    # Auto-generated by Archie mkxcfg
    Section "Device"
    Identifier "Card0"
    Driver "fglrx"
    VendorName "All"
    BoardName "All"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 16
    SubSection "Display"
    Depth 1
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection

Maybe you are looking for

  • ITunes won't open. Crashes system

    I don't know what happened! I haven't made any software installs lately, iTunes or otherwise. Then suddenly the other day, iTunes died. It doesn't come up when I hook up my iPod. If I try to run it, it will crash my desktop (makes all the icons and t

  • Hyperlinks in ePub output

    Hi all, currently Robohelp includes hyperlinks into the ePub output but when the user clicks them they produce errors (at least with Adobes own ePub reader ADE). Because the output files are contained in an archive it may not be possible to link to o

  • Connecting an iPhone to a laptop without iTunes

    My laptop does not have iTunes. What I would like to know us what would happen if I connected my iPhone to it and what would happen if I tried to move items to it, such as pictures. Thanks.

  • Automatic tempfile offline due to write error on

    Hi everybody, I am getting the following in my alert log and my TEMPFILE went offline. KCF: write/open error block=0x5a909 online=1 file=4 /database1/oratemp1/temp1_04.dbf error=27091 txt: 'HP-UX Error: 28: No space left on device Automatic tempfile

  • Change purchase requisition item number

    Hi, I want to copy an existing line item in the PR but, also I want to assign it the item number. Right now this field is display only for existing line items. Example: I have one line item with item number 10. Item number can not be changed (display