ATI HD5770 Problem

Hey guys I was wondering if anyone could help me solving a little problem that I have with my newly purchased graphic card.... It's and ATI HD5770 i just can't get it working with the opensource driver xf86-video-ati the login manager just won't start up I'm using the vesa driver for now i just don't wanna install the catalyst driver...
By the way is that card supported by the opensource driver?
thanks

The reason why I didn't wanted to install the proprietary driver is because I was using the opensource one with my old graphic card and I was very satisfied with it... but since the series HD5XXX is not supported I've decided to install the proprietary and thank you for sharing your opinion about the catalyst driver And yes its working smoothly
Thank you once again

Similar Messages

ATI HD5770 and 2008 Mac Pro - Only DVI Port works

I went through 4 ATI Radeon HD 2600 video cards since 2008. Enough is enough. I bought a ATI HD5770 and i hope this is the end of it.
However, I have two monitors and I am unable to use the second monitor.
The main monitor is hooked into the DVIPort. It is a 24" NEC. The cable is a VGA to DVI.
I have another small 15" NEC monitor and I have a VGA to mini adapter into the mini port on the video card and it will not work.
I use both 10.5 and 10.8 on this machine and have no luck on either operating system.
When I plug into the mini port, the monitor in the DVI port tries to act as the second monitor yet the Mini port monitor will not turn on or activate. To elaborate, the working monitor will switch from the startup monitor and display as if it were a 2nd screen.
ideas?
help?

yes. 'tis tricky. I'd say see if mirroring is turned on, but I suspect it is. acorrding to apple, the monitor on the dvi port is fine. However, the 2nd one needs a mini displayport to VGA adapter. It ought to be active, rather than passive. the DVI I'm presuming is a Dual link one?
apparently, there's a mini DP to vga adapter firmware update, found here:
About the Mini DisplayPort to VGA adapter firmware update - Apple Support
so, maybe give that a try
JB

Ati driver problem linked with HP on Dutch win7 Pro

Hello,
There are 2 notifications that show up about having display adapter problem and Ati driver problem .
Is there a solutions ?

Please upload a copy of your system information file. Click "start" , type "msinfo32" , Click "file" at the top of the page, select "export" and give the file a name and click "save" .
Navigate to where the file was saved to, and upload the generated text file to a public folder on your OneDrive account and post the link here.

ATI HD5770 Performance Issue

I have a HD5770 card driving an Acer 22" monitor and my old HD2600XT powering another 17" IBM monitor. Everything works well, I think. I do alot of FCP and Logic stuff and play World of Warcraft, but I im not really seeing any performance increase from the 5770 to the 2600.
I ran Xbench on each card, and im actualy showing better performance on the 2600... Doesnt make since. WoW has framerate counters, and i really dont see any difference. It looks better with the 5770, but at the same in game setting on the old card, im getting the same frame rates. Just for **** and giggles, i removed the 2600 and ran xbench with just the 5770, and again, better performance number on the 2600. I was 1/2 tempted to grab a spare HD, and do a OS reinstall, but that seems kinda harsh. Granted my main HD is kinda slow, which im going to replace and do a clean install when 10.7 releases, but I still dont think thats the problem.
This is a MacPro 3.1 with a quad core 2.8, 16gb ram, 500gb main HD, and 2 1.5tb drives.
Any ideas?

Yeah, I know xbench is kinda old and i figured prolly not all that accurate anymore, but between that, and WoW, i really dont see any difference with the cards. Here is the info from the system profiler:
System Software Overview:
System Version:          Mac OS X 10.6.7 (10J869)
Kernel Version:          Darwin 10.7.0
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache:          12 MB
Memory:          16 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
Serial Number (system):          xxxxxxxxxxxx
Hardware UUID:          xxxxxxxxxxxxxxxxxxxxxxxx
ATI Radeon HD 5770:
Chipset Model:          ATI Radeon HD 5770
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          1024 MB
Vendor:          ATI (0x1002)
Device ID:          0x68b8
Revision ID:          0x0000
ROM Revision:          113-C0160C-155
EFI Driver Version:          01.00.436
Displays:
Acer AL2216W:
Resolution:          1680 x 1050 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Display Connector:
Status:          No Display Connected
Display Connector:
Status:          No Display Connected
ATI Radeon HD 2600 XT:
Chipset Model:          ATI Radeon HD 2600
Type:          GPU
Bus:          PCIe
Slot:          Slot-2
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          ATI (0x1002)
Device ID:          0x9588
Revision ID:          0x0000
ROM Revision:          113-B1480A-252
EFI Driver Version:          01.00.252
Displays:
IBM L170:
Resolution:          1280 x 1024 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Mirror:          Off
Online:          Yes
Rotation:          Supported
Display Connector:
Status:          No Display Connected
ATI Radeon HD 5770:
Name:          ATY,Hoolock
Type:          display
Driver Installed:          Yes
Bus:          PCI
Slot:          Slot-1
Vendor ID:          0x1002
Device ID:          0x68b8
Subsystem Vendor ID:          0x106b
Subsystem ID:          0x00cf
Revision ID:          0x0000
Link Width:          x16
Link Speed:          5.0 GT/s
ATI Radeon HD 5770:
Name:          ATY,HoolockParent
Type:          ATY,HoolockParent
Driver Installed:          No
Bus:          PCI
Slot:          Slot-1
Vendor ID:          0x1002
Device ID:          0xaa58
Subsystem Vendor ID:          0x106b
Subsystem ID:          0xaa58
Revision ID:          0x0000
Link Width:          x16
Link Speed:          5.0 GT/s
ATI Radeon HD 2600:
Name:          ATY,Lamna
Type:          display
Driver Installed:          Yes
Bus:          PCI
Slot:          Slot-2
Vendor ID:          0x1002
Device ID:          0x9588
Subsystem Vendor ID:          0x106b
Subsystem ID:          0x00a6
Revision ID:          0x0000
Link Width:          x16
Link Speed:          5.0 GT/s

[Solved] xf86-video-ati install problem

I've just downgraded xorg because I was having problems with the recent upgrade, and its working fine now, but I can't install xf86-video-ati. I get the following error:
error: failed to commit transaction (conflicting files)
xf86-video-ati: /usr/lib/xorg/modules/drivers/ati_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/drivers/radeon_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/multimedia/theatre200_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so exists in filesystem
xf86-video-ati: /usr/lib/xorg/modules/multimedia/theatre_drv.so exists in filesystem
xf86-video-ati: /usr/share/licenses/xf86-video-ati/LICENSE exists in filesystem
xf86-video-ati: /usr/share/man/man4/ati.4.gz exists in filesystem
xf86-video-ati: /usr/share/man/man4/radeon.4.gz exists in filesystem
Errors occurred, no packages were upgraded.
I'm installing xf86-video-ati-6.12.4-1 from http://arm.kh.nu/old/extra/os/i686/.
xorg-server version is 1.6.3.901-1.
Last edited by ataylor (2009-11-05 18:29:32)

From what I can see it looks like they are files from a previous xf86-video-ati installation, although I've no idea why they would be there since I removed it cleanly. I was thinking perhaps I should just force the install?

Ati HD5770 - catalyst 10.x - no mouse pointer at all :|

hallo.
i (was) using the old_xorg repo with the catalyst drivers. My hd5770 used to work pretty fine. Yesterday i did a pacman -Syu.
Since then, my mouse pointer disappeared (in Xorg.N.log there are no evidence of this). I tryed to start X without an actual WM/DM and the mouse pointer is still missing. This makes me suppose i have some glitch with xorg or ati drivers.
Does anyone incurred in this? Is it solvable?
I tryed to update xorg to a newer version (commenting hte xorg_old repo), but now i get nothing (X crashes).
Is there a way to remove X and all its libraries and start from a fresh point using the right xorg/driver version?
I'm using arch64.
Thanks!
Luca

betaneptune wrote:
I don't know where else to turn.
Microsoft's own forums for their Mac software http://answers.microsoft.com/en-us/mac

Radeon ATI 4870 PROBLEM????

Hey Everyone,
So I have a brand new MacPro with the Dual Quad 2.93 and 16GB of Ram, I have the ATI 4870 Card running along with my DeckLink HD Extreme 3 capture card. My question is that it seems like this graphics card is having trouble supporting my 30inchACD and TWO Samsung P2570HD's TOTAL OF 3 DISPLAYS, one of the Samsungs is connected via HDMI from my Decklink HD Ex and the other through MiniDisplay to DVI, I get weird issues like my mouse pointer freezing up and sometimes weird dropped frames in FCP7...can i or should i add another graphics card??? any solutions...MANY THANKS!!!!

Nice. 150 bucks for the converter. And its out of stock.
Luckily I found a much better solution... sold my 24inch cinema display on craiglist, and buy an ASUS VW266H for 280 bucks on amzn. Turns out the image quality on it is much better as well.
I'd highly recommend anyone to ditch their apple lcd for a higher quality lcd for a fraction of the cost. And leave these horrific compatibility problems behind you.

ATI Driver Problem - Encore CS5

Hi All,
I have spent a number of hours now trying to troubleshoot an issue with Encore CS5. I have it installed on a HP 6930p Notebook computer with a ATI HD3400 onboard video card. Whenever Encore starts, my screens go black and I get an error "display driver stopped responding and has recovered". I have the latest (22nd October 2010) drivers installed and I have tried changing nearly every setting for the display card, but to no avail. It is obviously the driver, because if I change the driver back to the standard Microsoft driver, the software works, but with limited resolution and without the ability to extend screens. If I also revert to the oldest version of the ATI driver, it doesn't black out, just crashes with a "application has stopped working" error.
Now I could just keep changing drivers when I use Encore, but this is a bit extreme and you would think it would work. All my other CS5 software works ok... PPro, AE, Photoshop, InDesign etc.
Operating System is Windows 7 Enterprise 64Bit with 4GB Memory.
Anyone got any suggestions or advice? Or is anyone else having a similar issue and managed to solve the problem?
I could always install my older version of Encore CS4, but does installing Encore CS4 after CS5 has been installed cause any issues or problems? Is this the easiest answer?
Regards, John.

You have to do what you have to do, but I would be reluctant to settle for EN CS4 with a CS5 suite - dynamic link is further improved, and you'll be giving that up or complicating it.
(Yes, there are some users with problems, particularly doing Bluray, and they refer to using CS4 at times to fix things. I like dual installations.)
No real idea on the video card issues. I do think it is interesting that it is only Encore.

ATI x1600 problem almost fixed!

Hello there,
As you already know, there are frequent display artifact problems and in general GPU stability problems with iMac (and macbook pro!) models featuring the notorious ATI x1600.
My last attempt at fixing this problem was to check the GPU diode temperature, which was around 59 degrees Celcius. The video card stability tests that I made showed beyond doubt that graphics chip stability was compromised at this temperature. One program showed random video RAM errors suggesting GPU bus instability, and the other program found artifacts in under 10 seconds.
Therefore, I downloaded the wonderful freeware program called smcFanControl and adjusted the minimum fan speed to about first 2000 rpm and then 1500 rpm, yes there is more noise, but the GPU Diode temperature is about 44 degrees now and there haven't been any nasty crashes for a while, and on the boot camp the video card stability surpassed the one minute mark. And I haven't seen any crashes since then, let's see how far it will go, it's past one day and there is no sign of a storm yet. I also keep the LCD brightness as low as possible (around median) to avoid excessive heat and do not use graphics intensive screensavers just to be on the safe side.
Hope this helps somebody around here!
Regards,
Eray Ozkural
Researcher, Erendiz Superbilgisayar Ltd.
PS: The Apple Hardware Test cannot find any fault when the GPU is malfunctioning....

The only difference is that people with problems tend to post on forums to state that they have problems. People who do not have problems generally do not have any reason to post that everything is perfectly fine. Therefore, such anecdotal evidence is heavy skewed to the negative.
Also, when I do a Google search on "ati x1600 mac," most of the hits are about people over-clocking their X1600 and how to do it (not about problems). Because they are able to over-clock from the stock settings, that tells me Apple designed a fairly large safety margin into the design, since any over-clocking will increase heat and decrease reliability. I have not personally over-clocked anything, since I am happy with the stock performance.
(I see no evidence to justify calling it "notorious.")
So my guess would be that I am not particularly lucky, but you may be unlucky. Or perhaps your iMac's cooling system is not working as well as it should, since you say that increasing the fan speed improves reliability; maybe airflow is being blocked or hindered internally or one of the fans is not working properly. Or your iMac's power supply is becoming faulty. Or you are plugging it into an old surge suppressor (power strip) or one with too many other devices connected (overloaded).

Radeon Mobility HD 4650 / xf86-video-ati driver problem

Hi everyone,
I am under Archlinux with my laptop (Asus N81vp) since a year, and i've got this problem since the begining. With the radeon driver installed, my X work well but the fan of my card is screaming and my laptop anormaly hot. I do not have this problem under Windows or with the catalyst driver (witch is working). I really want to use the radeon, more maintained (and free ^^).
I cannot have the temperature and the state of the fan, my ic2 chips aren't recognized by lm-sensors...
I really don't know where the problem is : if anyone have a Radeon mobility HD 4650, i would like to know if they have the same problem or a solution. Maybe it's a bug of the driver, or a configuration problem...
Anyway, if anyone have a solution, i googlize it for hours, and this problem outclass my knowledge...
Here's a bit of my hardware and configs files. I you want more, tell me
Thanx in advance (and i'm sorry if my english sucks, i'm from France ...)
uname -r
2.6.39-ARCH
Version de xf86-video-ati : 6.14.2-1 (Testing)
I do not have a xorg.conf
[arsenik@Spartakus ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M96 [Mobility Radeon HD 4650]
01:00.1 Audio device: ATI Technologies Inc RV710/730
03:00.0 Network controller: Intel Corporation WiFi Link 5100
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:03.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
dmesg
http://pastebin.com/nmZYeTKf
/etc/rc.conf
http://pastebin.com/v6q4LQD4
Last edited by Spartakus (2011-07-19 18:30:40)

As far as I know, the open source driver simply churns through quite a bit more power than catalyst when idling. The higher core temperature is the unfortunate direct result of this.
I'm using xf86-video-ati 6.14.2-1 too, but with a Radeon Mobility HD4570 (which is detected by lm-sensors, by the way). With the default driver settings (highest power state), I see core temperatures as high as 88 degrees C when doing nothing. I've added
echo mid > /sys/class/drm/card0/device/power_profile
to /etc/rc.local as a workaround for the issue. This basically forces a lower power mode than default at boot. Currently, my GPU idles at 64 degrees C, which is sort of acceptable in my opinion. The obvious side effect of this workaround is that your graphics performance goes down, which I'd even notice in Gnome 3's transitions (not being as smooth as before).
This page may be relevant to your interests: https://wiki.archlinux.org/index.php/ATI#Powersaving

Linux 3.1.9 and HDA ATI SB problem [SOLVED]

I`ve just updated kernel from 3.1.8 to 3.1.9 and now my HDA ATI SB (ALC889 Analog) audio card is now unavailable for system. Any suggestions?
I have KDE, and phonon-gstreamer.
Last edited by RealGecko (2012-01-14 11:38:02)

Well problem solved. Of course it is strange, but.. Before update I installed fluidsynth and enabled to run it as daemon through rc.conf. Then was update and restart after that I had message that my sound card doesn`t work. I was thinking and decided to remove fluidsynth from daemons array. After restart everything works again. The strangest thing is that if I start fluidsynth daemon during system run(/etc/rc.d/fluidsynth start) everything works fine.

[ATI] Resolution Problems

Okay, so my monitor's native resolution is 1440x900 (19" 16:10) but for some reason xorg will only display at 1400x1050 (4:3) which makes my eyes very sad, and I was hoping someone here could help me get it to the right resolution.
xorg conf: http://pastebin.com/m717e1aa9
Oh and I have a radeon 3870.

R00KIE wrote:It does so because your xorg.conf says your monitor can do it.
In the "Section "Monitor"" try to comment modes your monitor doesn't support or that you don't want to use, I would delete or comment every resolution except the native one (if you are using a tft which I guess you do).
Or you could give autodetection a try,
The problem is my monitor's native resolution isn't in there, and I don't know exactly how to make a new one. I have tried tweaking the 1400x1050 resolution but it doesn't work (probably doin it wrong.) I have heard also from a friend that it might be the VESA driver which I'd like to replace anyway but I can't seem to get the ATI driver loaded.
Aprz wrote:
Under Section "Monitor", add Option "PreferredMode" "1440x900".
Section "Monitor"
Option "PreferredMode" "1440x900"
EndSection
Thanks for the suggestion, but doesn't work when the proper mode isn't in there anyways.

Overheating the laptop - Ati driver problem (SOLVED)

Hi ppl.
I have Acer Aspire 5732 Z laptop. Intel Pentium processor T4400 2.2 GHz. Ati Mobility Radeon HD 4570 512 MB VRAM, 15.6", 3 GB RAM, 320 GB HDD.
I successfully solved all the problems during the installation, but this one I can not handle. The laptop is HEATING too much. I also have Ubuntu 9.10 on the other partition and its all fine. Its working on the temperature of ~46 C. And my Arch is working on the temperature of ~60 C. So its about 15 C difference between Ubuntu and Arch. Way too much.
Arch is running in KDE mode. Have to add that I installed all KDE packages. Maybe the cause of this problem ?
I am using the proprietary Ati Radeon driver. I tried to change it with open source Ati driver but Xorg refused to configure again (gave me a blank screen).
I checked Wiki on laptop, but didnt succeded to solve this problem. Here s my rc.conf:
MODULES=( acpi-cpufreq )
DAEMONS=(syslog-ng dbus hal !acpid !acpi-support powernowd wicd !network !netfs alsa crond laptop-mode kdm)
powernowd configuration:
OPTIONS="-q -u 30 -l 10"
acpi-support is blacklisted because I installed it from AUR and didnt managed it to work. Its just saying "no permission" during the boot. I actually installed it because I read that its Ubuntus Acpi management. ~ I repeat Acpi is working fine on my Ubuntu.
I can also show my laptop-mode configuration files - if needed.
I am a newbie for Arch but I rlly done my best on this issue as I want to use this system. I think its great and highly configurable and I just love the fact its a rolling distro. But I cant use it overheating.
So, please help.
Last edited by webmasteryoda (2010-04-05 19:10:54)

Linux Mint 8 lsmod:
Module Size Used by
binfmt_misc 8356 1
ppdev 6688 0
vboxnetadp 78344 0
vboxnetflt 84840 0
vboxdrv 121160 1 vboxnetflt
dm_crypt 12928 0
arc4 1660 2
ecb 2524 2
snd_hda_codec_realtek 203328 1
snd_hda_intel 26920 2
joydev 10272 0
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
ath9k 258744 0
snd_mixer_oss 16028 1 snd_pcm_oss
mac80211 181236 1 ath9k
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
ath 8060 1 ath9k
snd_seq_midi 6432 0
iptable_filter 3100 0
snd_rawmidi 22208 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
ip_tables 11692 1 iptable_filter
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
cfg80211 93052 3 ath9k,mac80211,ath
x_tables 16544 1 ip_tables
uvcvideo 59080 0
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
fglrx 1989532 34
snd 59204 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
led_class 4096 1 ath9k
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
videodev 36736 1 uvcvideo
atl1c 30880 0
v4l1_compat 14496 2 uvcvideo,videodev
psmouse 56180 0
lp 8964 0
serio_raw 5280 0
parport 35340 2 ppdev,lp
dm_raid45 84228 0
xor 15620 1 dm_raid45
usbhid 38208 0
video 19380 0
output 2780 1 video
intel_agp 27484 0
agpgart 34988 2 fglrx,intel_agp
ramzswap 8880 1
xvmalloc 5180 1 ramzswap
lzo_decompress 2620 1 ramzswap
lzo_compress 2300 1 ramzswap
Arch lsmod:
Module Size Used by
ipv6 237596 14
radeon 525058 2
ttm 31045 1 radeon
drm_kms_helper 21971 1 radeon
drm 126556 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 4219 1 radeon
fuse 51628 2
joydev 7768 0
arc4 1058 2
ecb 1545 2
snd_hda_codec_realtek 179443 1
snd_hda_intel 18985 2
snd_hda_codec 56728 2 snd_hda_codec_realtek,snd_hda_intel
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33693 0
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57351 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_mixer_oss 14810 1 snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
ath9k 263503 0
snd 43847 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_hwdep,snd_pcm,snd_mixer_oss,snd_timer
usbhid 33579 0
soundcore 5007 1 snd
mac80211 149018 1 ath9k
psmouse 56309 0
i2c_i801 7122 0
uvcvideo 54591 0
iTCO_wdt 7577 0
ath 6552 1 ath9k
cpufreq_powersave 646 0
intel_agp 23225 0
videodev 31763 1 uvcvideo
hid 61085 1 usbhid
v4l1_compat 13478 2 uvcvideo,videodev
cfg80211 106663 3 ath9k,mac80211,ath
uhci_hcd 19156 0
ehci_hcd 31594 0
snd_page_alloc 5841 2 snd_hda_intel,snd_pcm
pcspkr 1347 0
serio_raw 3620 0
rfkill 12320 1 cfg80211
atl1c 26168 0
i2c_core 15369 5 radeon,drm,i2c_algo_bit,i2c_i801,videodev
cpufreq_ondemand 6897 2
agpgart 23331 3 ttm,drm,intel_agp
usbcore 118921 5 usbhid,uvcvideo,uhci_hcd,ehci_hcd
sg 21079 0
video 14871 0
iTCO_vendor_support 1453 1 iTCO_wdt
evdev 6970 16
output 1404 1 video
ac 2255 0
battery 7328 0
thermal 9326 0
led_class 1933 1 ath9k
button 3638 0
wmi 4083 0
acpi_cpufreq 5631 0
freq_table 1955 2 cpufreq_ondemand,acpi_cpufreq
processor 26526 3 acpi_cpufreq
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext4 313138 2
mbcache 4278 1 ext4
jbd2 68146 1 ext4
crc16 1041 1 ext4
sr_mod 13161 0
sd_mod 24101 5
cdrom 31625 1 sr_mod
ahci 29834 4
libata 135579 1 ahci
scsi_mod 78933 4 sg,sr_mod,sd_mod,libata
I am using lmsensors on Arch and some kind of panel sensor on Mint, but its ok for sure. Few minutes ago I checked temperature on Arch and it was 56 C. Then I rebooted and when I logged into Mint it was 56 C. But few mins later temperature normalized to 45 C in Mint. After lsmod I logged into Arch again and temperature raised to 54 C.
So its Arch problem for sure.
@hokasch
I am not sure about noise level of fans. Sounds similar to me. But maybe its a fan problem. I know its sometimes loud and sometimes silent. Probably depends on the system temperature. Maybe Arch cant control it normaly. Is there any kind of software that is used for fan speed ?
Last edited by webmasteryoda (2010-04-03 19:18:38)

ATI GraphicCaralyst problem

Hi
I have a problem with my graphic driver
Now I found the solution in this article
https://wiki.archlinux.org/index.php/AT … _or_startx
But anybody can explain me what does the below text mean ?
Wiki wrote:Boot to init3, add the number 3 at the end of the menu.lst kernel options:
# rm /etc/ati/amdpcsdb
Finally forgive my poor English
Thank you so much

Right after boot you get in the GRUB menu. Select the entry with the arrow keys but dont press 'enter' as you normally would. Press 'e' instead, this will allow you to edit the entry. You will get to a new screen with all the lines of that entry, select the line tha says 'kernel ....' and press 'e' again. Put a '3' at the end of the line, 'enter' when you are done and 'b' to boot.
Normally you should boot to init5 which willl start X. Booting to init3 will only give you a terminal.

ATI Driver Problems Version 8.533.3.1-081110a-075168C-Lenovo

I hope I'm pasting this in the correct location.
The lastet version of the ATI drivers for my ThinkPad (T60) have a problem. The Catalyst Control Panel will simply open and close really fast. It will not run. Is there anyway to diagnose and fix this issue?
At this time I am forced to use NGO's Optimized drivers, but I'd rather use Lenovo's drivers.
Thank you.

I hope I'm pasting this in the correct location.
The lastet version of the ATI drivers for my ThinkPad (T60) have a problem. The Catalyst Control Panel will simply open and close really fast. It will not run. Is there anyway to diagnose and fix this issue?
At this time I am forced to use NGO's Optimized drivers, but I'd rather use Lenovo's drivers.
Thank you.

ATI HD5770 Problem

Similar Messages

Maybe you are looking for