ATI Mobility Radeon HD 4350 with 512 MB primiere pro

Will i3 process with 4GB RAM, 320GB (7200RPM) HDD and ATI Mobility Radeon HD 4350 with 512 MB be compatible with premiere pro????
Please assist..!

So Mr Millaard I will have to buy a laptop with 2 hard drives???
I am stuck if so is the case,
I have two options
getting a HP laptop with
Intel Core i3-370M Processor (2.4 GHz, 3 MB L3 cache)
512 MB dedicated video RAM (ATI) one
RAM 3 GB DDR3
500 GB 7200 rpm SATA II Hard Drive
or
DELL XPS with i7 processor
2GB graphics card
4GB card
500 GB hard
I just want to use that software for subtitling
please assist

Similar Messages

  • ATI Mobility Radeon X1600 compatible with Motion?

    Hi, is this card in the MacBook Pro and the version in the iMac compatible with running Motion?
    ATI Mobility Radeon X1600 or does it need a bit 'more'?
    thanks.

    Search is your friend:
    http://discussions.apple.com/thread.jspa?messageID=1809447&#1809447
    Patrick

  • AMD M880G with ATI Mobility Radeon HD 4250 display driver stopped responding

    I have received the following message on my HP Pavilion dv7:
    Display driver AMD driver stopped responding and has successfully recovered. It is an AMD M880G with ATI Mobility Radeon HD 4250.
    The screen randomly does this starting a day or so ago. Maybe once every few hours or it may do it once every 5 min three times in a row. The screen has random little blue dots here and there.
    What do I need to do? Is this something I could potentially fix/replace/etc?

    Is this they way you did a factory reset tomu96?  Performing an HP System Recovery (Windows 7)
    If so, that should have resolved the issue, but since it continues to crash if you made no changes after that restore, you probably have hardware failure.
    In North America, call (800)-474-6836 outside of North America find your support number here HP Technical Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Re: Trying to run at 256 colours with Ati Mobility Radeon HD2600 on Satelli

    Hi, I need to run some applications in 256 colours in Windows Vista 32bit. Right clicking and ticking in the properties run at 256 colours doesn't work. At the properties of the Ati Mobility Radeon HD2600 one can only choose between 16bit or 32bit colours.
    Can you support me a solution to my problem? Maybe a tweaked driver?
    Thanks.

    Hi there,
    Vista disables 256 color mode by default, but if you right-click on the file, select properties, then the Compatibility Tab there should be
    an option to run in 256 color mode, though I don't know if these setting your system to 256 color mode will fix the program.
    Since youve already tried it you could also try to install some Virtual system like VMware and then install Win95/98 into VMware. Then it should work.
    Sorry, but I searched and couldnt find any solution. Maybe you should google on some microsoft sites to find a workaround....typing "256 colors Vista" should help.
    Greest

  • [Solved] ATI Mobility Radeon HD 2300 Problem - fglrx not loading

    I changed the currently unreliable GS 8600 nvidia card in my laptop to a compatible old ATI HD 2300 card from a similar model laptop but I can't get the Catalyst drivers to work with it. The open source driver xf86-video-ati works well with it for basic use, but is not so good for 3D. This card should work with an Amilo xi-2428 & has done for other people who have developed faulty nvidia cards.
    I have the legacy driver installed from AUR (Catalyst-total-hd234k) and have enabled Vi0L0's [xorg112] server properly in pacman.conf & downgraded to Xorg-server 1.12. I also tried downgrading to Xorg-server 1.11 & reinstalling the drivers from AUR. Plus I have enabled and tried Vi0L0's [catalyst-hd234k] repo in place of the AUR package each time too. Made no difference. I've blacklisted radeon too.
    When the laptop boots systemd-modules-load.service shows as failed.
    $ sudo systemctl --failed
    UNIT LOAD ACTIVE SUB DESCRIPTION
    systemd-modules-load.service loaded failed failed Load Kernel Modules
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    1 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    [fyn@Finnix ~]$ systemctl status systemd-modules-load
    systemd-modules-load.service - Load Kernel Modules
    Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
    Active: failed (Result: exit-code) since Wed, 2012-12-19 15:29:57 GMT; 7min ago
    Docs: man:systemd-modules-load.service(8)
    man:modules-load.d(5)
    Process: 121 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
    It is only the fglrx module which fails to load:-
    $ sudo journalctl -b _PID=121
    -- Logs begin at Fri, 2012-10-26 09:21:22 GMT, end at Wed, 2012-12-19 15:38:07 G
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Failed to insert 'fglrx': No such device
    Dec 19 15:29:56 Finnix systemd-modules-load[121]: Inserted module 'nfs'
    Dec 19 15:29:57 Finnix systemd-modules-load[121]: Inserted module 'vboxnetflt'
    I have no idea how to get fglrx to load & since it fails to load so early during boot I doubt the problem lies with my Xorg.conf. Likewise neither aticonfig or the ATI control center work.
    aticonfig: No supported adapters detected
    amdcccle just give this message
    "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
    No AMD graphics driver is installed, or the AMD driver is not functioning properly.
    Please install the AMD driver appropriate for you AMD hardware, or configure using aticonfig."
    Graphic card info
    $ hwinfo --gfxcard
    27: PCI 100.0: 0300 VGA compatible controller (VGA)
    [Created at pci.319]
    Unique ID: VCu0.SZRyUClQNUF
    Parent ID: vSkL.rRA4AOLb3d5
    SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
    SysFS BusID: 0000:01:00.0
    Hardware Class: graphics card
    Model: "ATI M71 [Mobility Radeon X2100]"
    Vendor: pci 0x1002 "ATI Technologies Inc"
    Device: pci 0x7210 "M71 [Mobility Radeon X2100]"
    SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
    SubDevice: pci 0x1107
    Revision: 0xce
    Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
    I/O Ports: 0x2000-0x2fff (rw)
    Memory Range: 0xcfef0000-0xcfefffff (rw,non-prefetchable)
    Memory Range: 0xcfe00000-0xcfe1ffff (ro,non-prefetchable,disabled)
    IRQ: 5 (no events)
    I/O Ports: 0x3c0-0x3df (rw)
    Module Alias: "pci:v00001002d00007210sv00001734sd00001107bc03sc00i00"
    Driver Info #0:
    Driver Status: radeon is not active
    Driver Activation Cmd: "modprobe radeon"
    Config Status: cfg=new, avail=yes, need=no, active=unknown
    Attached to: #8 (PCI bridge)
    Primary display adapter: #27
    my Xorg.conf derived mainly from a newly generated config using Xorg :0 -configure
    Section "ServerLayout"
    Identifier "Arch"
    Screen 0 "Screen0" 0 0
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "ColorTiling" # [<bool>]
    #Option "ColorTiling2D" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "EXAVSync" # [<bool>]
    #Option "EXAPixmaps" # [<bool>]
    #Option "ZaphodHeads" # <str>
    #Option "EnablePageFlip" # [<bool>]
    #Option "SwapbuffersWait" # [<bool>]
    Identifier "Card0"
    Driver "fglrx" # Essential.
    # Driver "vesa"
    BusID "PCI:1:0:0" # Recommended if autodetect fails.
    Option "OpenGLOverlay" "0" ##
    Option "XAANoOffscreenPixmaps" "false" ##
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card1"
    Driver "fglrx"
    # Driver "vesa"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24 # Should not change from '24'
    Modes "1280x800" "1280x800" ## 1st value=default resolution, 2nd=maximum.
    Virtual 1664 1200 ## (x+64, y) to workaround potential OGL rect. artifacts/
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "Card1"
    Monitor "Monitor1"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666 # May help enable direct rendering.
    EndSection
    Xorg log
    [ 22.305]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 22.306] X Protocol Version 11, Revision 0
    [ 22.306] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 22.307] Current Operating System: Linux Finnix 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
    [ 22.307] Kernel command line: root=/dev/sda3 ro video=vesa:off vga=0x360 init=/usr/lib/systemd/systemd nomodeset
    [ 22.308] Build Date: 27 August 2012 08:04:39AM
    [ 22.308]
    [ 22.309] Current version of pixman: 0.28.2
    [ 22.309] Before reporting problems, check
    to make sure that you have the latest version.
    [ 22.310] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.312] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 19 13:14:33 2012
    [ 22.312] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 22.313] (==) ServerLayout "Arch"
    [ 22.313] (**) |-->Screen "Screen0" (0)
    [ 22.313] (**) | |-->Monitor "Monitor0"
    [ 22.313] (**) | |-->Device "Card0"
    [ 22.313] (**) |-->Screen "Screen1" (1)
    [ 22.313] (**) | |-->Monitor "Monitor1"
    [ 22.313] (**) | |-->Device "Card1"
    [ 22.313] (**) |-->Input Device "Mouse0"
    [ 22.313] (**) |-->Input Device "Keyboard0"
    [ 22.313] (==) Automatically adding devices
    [ 22.313] (==) Automatically enabling devices
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 22.313] Entry deleted from font path.
    [ 22.313] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 22.313] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 22.313] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 22.313] (WW) Disabling Mouse0
    [ 22.314] (WW) Disabling Keyboard0
    [ 22.314] (II) Loader magic: 0x7c8b00
    [ 22.314] (II) Module ABI versions:
    [ 22.314] X.Org ANSI C Emulation: 0.4
    [ 22.314] X.Org Video Driver: 12.1
    [ 22.314] X.Org XInput driver : 16.0
    [ 22.314] X.Org Server Extension : 6.0
    [ 22.315] (--) PCI:*(0:1:0:0) 1002:7210:1734:1107 rev 206, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
    [ 22.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 22.315] (II) "extmod" will be loaded by default.
    [ 22.315] (II) "dbe" will be loaded by default.
    [ 22.315] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 22.315] (II) "record" will be loaded by default.
    [ 22.315] (II) "dri" will be loaded by default.
    [ 22.315] (II) "dri2" will be loaded by default.
    [ 22.315] (II) LoadModule: "glx"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 22.315] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 22.315] compiled for 6.9.0, module version = 1.0.0
    [ 22.315] (II) Loading extension GLX
    [ 22.315] (II) LoadModule: "extmod"
    [ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 22.315] (II) Module extmod: vendor="X.Org Foundation"
    [ 22.315] compiled for 1.12.4, module version = 1.0.0
    [ 22.315] Module class: X.Org Server Extension
    [ 22.315] ABI class: X.Org Server Extension, version 6.0
    [ 22.315] (II) Loading extension MIT-SCREEN-SAVER
    [ 22.316] (II) Loading extension XFree86-VidModeExtension
    [ 22.316] (II) Loading extension XFree86-DGA
    [ 22.316] (II) Loading extension DPMS
    [ 22.316] (II) Loading extension XVideo
    [ 22.316] (II) Loading extension XVideo-MotionCompensation
    [ 22.316] (II) Loading extension X-Resource
    [ 22.316] (II) LoadModule: "dbe"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 22.316] (II) Module dbe: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension DOUBLE-BUFFER
    [ 22.316] (II) LoadModule: "record"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 22.316] (II) Module record: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.13.0
    [ 22.316] Module class: X.Org Server Extension
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension RECORD
    [ 22.316] (II) LoadModule: "dri"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 22.316] (II) Module dri: vendor="X.Org Foundation"
    [ 22.316] compiled for 1.12.4, module version = 1.0.0
    [ 22.316] ABI class: X.Org Server Extension, version 6.0
    [ 22.316] (II) Loading extension XFree86-DRI
    [ 22.316] (II) LoadModule: "dri2"
    [ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 22.317] (II) Module dri2: vendor="X.Org Foundation"
    [ 22.317] compiled for 1.12.4, module version = 1.2.0
    [ 22.317] ABI class: X.Org Server Extension, version 6.0
    [ 22.317] (II) Loading extension DRI2
    [ 22.317] (II) LoadModule: "fglrx"
    [ 22.317] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 22.333] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] Module class: X.Org Video Driver
    [ 22.333] (II) Loading sub module "fglrxdrm"
    [ 22.333] (II) LoadModule: "fglrxdrm"
    [ 22.333] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 22.333] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [ 22.333] compiled for 1.4.99.906, module version = 8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
    [ 22.333] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
    [ 22.333] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
    [ 22.333] (++) using VT number 1
    [ 22.334] (WW) Falling back to old probe method for fglrx
    [ 22.337] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 22.337] (EE) No supported AMD display adapters were found
    [ 22.337] (EE) No devices detected.
    [ 22.337]
    Fatal server error:
    [ 22.337] no screens found
    [ 22.337]
    Please consult the The X.Org Foundation support
    at
    for help.
    [ 22.337] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 22.337]
    Solved. The  ATI Mobility Radeon HD 2300 was based on an earlier design & was not really one of the HD 2*** cards, even tho it was released as one (HD 2*** cards are R600 series while the HD 2300 is based on the R500 generation). So the offical drivers for it were relegated to legacy in 2009 with AMD's Catalyst 9.3 release & are no longer supported. Pretty crappy considering the HD 2300 was only on the market from 2007.
    To use the official catalyst drivers would require xorg 1.5.3 and kernel 2.6.29..... with no support for newer distros.
    Using open source drivers, cannot remember all the packages but have listed some below in case it helps anyone:-
    xf86-video-ati
    ati-dri
    lib32-ati-dri
    libtxc_dxtn
    lib32-libtxc_dxtn
    mesa
    lib32-mesa
    No xorg.conf needed for it using kms, but can make a config file to tweak if you like in the xorg.conf.d directory called 20-radeon.conf
    Last edited by Nixie (2012-12-24 17:21:29)

    Thanks for the response. It is not an obvious hardware issue. I would contact HP phone support to get the hardware addressed. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks!
    Mario
    I worked on behalf of HP.

  • Flash Player Crashes completely on ATI Mobility Radeon

    hello,
    I am the administrator of a couple of websites, that share the same AJAX/Flash AS3 basic structures. Normally, everything works fine, but on a few notebooks, every browser crashes at that moment, the flash components start to work.
    the notebook:
    DELL studio XPS 16
    ATI Mobility Radeon HD 3670
    Windows Vista
    http://www.dell.com/us/en/home/notebooks/laptop-studio-xps-16/pd.aspx?refid=laptop-studio- xps-16&cs=19&s=dhs
    an example page:
    http://www.thadasuanduanchai.com
    i have no idea, why that happens, but i suggest, that a problem with flash-graphics card or flash-built-in camera may be responsable for the problem.
    Has anybody an idea?
    thank you very much,
    C.Brosdau
    Germany

    If you read in graphics hardware support in some previous releases of Flash Player, flash video decoding support a.k.a. h.264 hardware video decoding is supported fully by ATi(or AMD) Radeon HD 4xxx and higher. The Radeon HD 3xxx and lower can't support h.264 video decoding for flash video decoding fully enough.

  • Gx623 ati mobility radeon 4670

    I have problem with ati mobility radeon 4670, as i can understand full core speed is reached just in 3d mode (675MHz), normal mode 300 MHz.
    I made a test with game "Blur" and it seems like something wrong with 3d control, because  i got lag. maybe drivers ? or smth ? 
    Driver version: 8.741.0.0
     i guess in 3d mode it should stay stable at 675MHz

    The temperatures are a bit high if it is a new laptop. If it's not, there may be some dust inside building the heat up. You should try installing system control manager and using the turbo mode. It improves the performance quite a lot. Also, i would suggest to update the game to the latest version, it may improve the performance too. This issue was really significant with GTA4. With the original version, it lagged with low settings, and with the latest patch i can play on medium settings with no lag at all.

  • Can not install latest ATI mobility Radeon x1600 display driver for my Satellite A100

    Hello,
    my Satellite A100-704 PSAA9E is equipped with the ATI Mobility Radeon X1600 display graphic card, for which ATI provides a new driver, named Catalyst 8.3. My issue is that when I run the verification software I get a message telling me that driver is not suitable to be installed on my system.
    Is that any information available about it? Can I still install the new Catalyst driver or it's better if I don't? Oh, the current driver I have running on my notebook is the one downloaded from the Toshiba site, 8.292 I believe.
    Any information is appreciated. Thank you very much.

    > Can I still install the new Catalyst driver or it's better if I don't?
    I dont recommend the installation of any 3rd party graphic drivers. The fact is that such drivers are not tested and not certified and nobody knows how such driver would affect the notebooks hardware in worst case it could lead to the GPU overheating and damage
    best regards

  • HP G-72 Video driver UPDATE (ATI Mobility Radeon HD 5470)

    Hi...
    Pleas I need latest video driver for my GPU Ati Mobility Radeon 5470...win7 64bit
    I found only driver of 2010 (sp 50231) and I need the newer...
    When I download for example Catalyst 13.9...with graphics driver and install, switchable graphics stop working...
    Pleas can you help me? Witch product I can download?
    Thx so much
    This question was solved.
    View Solution.

    Hi Sirec,
    Please let me know what is your model number and current operating system?
    Here is a link that will help you find that out.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&lc=en&cc=us&dlc=en
    Please let me know.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • ATI Mobility Radeon X1600 graphics card Windows 8 driver missing

    I just installed Windows 8 Enterprise Trial version on HP nx9420 laptop (2GHz dual core prosessor, 4gb memory, ATI Motility Radeon X1600 graphics card with 256mb own memory, 1680x1050 native display resolution) on second partition, side by side with existing
    Windows 7. 
    Installation succeeded perfect, except Windows 8 couldn't install, nor did find from Windows Update display driver for ATI Mobility Radeon X1600 graphics card. Only Microsoft generic display driver was installed and it offered maximum 1450x800 resolution,
    so not laptops native 1680x1050 screen resolution. 
    Windows 7 can install working ATI driver right from Windows Update for that graphics card (version 8.561.0.0 dated 1.12.2008). 
    Laptop manufacturer HP has latest, old driver for Vista (version 8.453.0.0 dated 22.1.2008), so I installed that, selecting compatibility mode Vista with setup-program in Windows 8. That installed, but seems to have some problems, telling of missing library,
    maybe with some ATI extra diplay manager software and C++ 2005 library, that it installed. 
    MY QUESTION: Is there some problems with Windows 8 and that ATI Mobility Radeon X1600 graphics card? Why isn't the Windows 7 -version of ATI mobility radeon X1600 display driver available in Windows Update for Windows 8 too? 

    Thank you all of your thanks. 
    I can confirm that this solution works with Windows 10 Technology/Insider preview too. And surely works with forthcoming Windows RTM too. 
    Windows 8.1 and Windows 10 TP work both like a charm with nearly 10 years old HP Compaq nx9420 laptop, with Intel Core 2 Duo and ATI Mobility Radeon X1600 display adapter. Nice co-operation of "old" hardware and very Modern Windows OS.
    So in brief:
    If you have laptop with ATI Mobility Radeon X1600 or other X1000-series display adapter and
    you want to install Windows 8, 8.1 or 10, do this:
    0) First just install Windows 8.x/10. It will install Microsoft Generic display driver, but that doesn't support full resolution of ATI Mobility Radeon X1000 -series - for example it may show maximum 1400x1050 -resolution, thus your laptop display and Radeon
    X1000 may support native 1650x1050, but you can't obtain that resolution with that Microsoft generic driver. So you need ATI-driver and you can get it this way: 
    1) With Internet Explorer (this doesn't work with other browsers) go to
    Microsoft Update -catalog:   http://catalog.update.microsoft.com/
    2) Search "ATI Mobility Radeon X1600"
      (or X1300, X1800 etc)
    3) Sort search results by date (last update -column), latest on top. You will see drivers for Windows 7
    - they will work with Windows 8.x and 10 too. There is certainly two of them; other is 32 bit only and other is 64 bit dirver.
    4) Select proper driver version of them, according your Windows 32 or 64 bit, so click Add
    5) At top-right click Show basket and then download those driver packages to your computer. They are cab-file
    -packages. 
    6) Obtain 7-zip -utility, install it and with it unpack that cab-driver package on folder with its package-name.
    7) On start of taskbar, right mouse button click Windows-Start and then select Hardware management. On
    Hardware management -window open Display adapter -section, then mouse right click Microsoft adapter and select Update driver. Then on next window, select search driver from computer. 
    8) Browse on folder, where you unpacked ATI driver (on stage 6 earlier) and select Next ... that updates
    driver, on the go and you don't need even to reboot Windows. 
    9) Now you have proper ATI Mobility Radeon -driver in use. It  surely sets automatically resolution
    according your laptop screen (so recommended native resolution of screen panel) or you can select that on diplay settings. 
    Extra: For that Windows 8.x/10 boot works fine too, do this too: 
    Seems that Windows 8.x (and Windows 10 too), with their hybrid-shutdown -functionality, require some support of the display adapter, that ATI Radeon Mobility x1000 -series don't have. 
    So the solution is to disable that Windows 8.x (or Windows 10) hybrid boot -functionality (that is quicker boot) and to use "normal boot". 
    You can fix that this way:
    - at end of Taskbar click battery/power icon and select Power settings
    - navigate to power and sleep settings
    - either at bottom of those settings, or in Win10 more power settings, select power buttons functionality/settings (so what power button, sleep button or closing laptop screen does)
    - at bottom of those settings is shutdown options (or with similar name). uncheck "use quick boot" -settings (for to uncheck that you may need to click first upper "changing disabled settings" (or similar name) at top or windows) 
    (I recommend to check Hibernate at the same time too, because that is usefull)
    - then Save settings and reboot Windows and you have got rid of that problem that Windows 8.x/10 don't show Lock screen, now it does.
    Boot takes just a little longer, so practically no problem. And if you need quicker boot with laptop, use Hibernate-state, so don't shut down your laptop, but instead put it into Hibernate-state (that is better than Sleep mode, because Hibernate-mode doesn't
    consume battery-power, like Sleep-mode does)

  • No hardware video decoding on ATI Mobility Radeon HD 3470

    Hi all,
    does anybody know why accelerated video decoding isn't avaiable on ATI Mobility Radeon HD 3xxx Series? From what I read in the corresponding KB article it works on the desktop counterparts that are based on the same hardware.
    In my case I'm using an ATI Mobility Radeon HD 3470 on a T400 with switchable graphics (same as reported in this thread). When watching a video on Youtube (e.g. http://www.youtube.com/watch?v=eI3f4b-b8ig) and displaying video information it says "accelerated video rendering, software video decoding". So hardware video rendering works, but hardware video decoding doesn't! It's acceptable on my machine since it's equipped with a decent fast Intel P8400 CPU, but since my graphics card supports hardware decoding for h264 video it's just a waste of ressources.
    Does anybody know if Adobe plans support forhardware decoding with these graphics cards? Or is there even a way to use hardware decoding although not fully supported?
    Thanks
    Eduard
    System Information:
    Windows 7 Prof. x86
    Firefox 10.0.2
    Flash Player 11.1.102.63
    DxDiag report: http://pastebin.com/FKxtBA2i

    If you read in graphics hardware support in some previous releases of Flash Player, flash video decoding support a.k.a. h.264 hardware video decoding is supported fully by ATi(or AMD) Radeon HD 4xxx and higher. The Radeon HD 3xxx and lower can't support h.264 video decoding for flash video decoding fully enough.

  • Will the ATI Mobility Radeon HD 3400 Series Graphics card be capable of outputting at 2560x1440?

    I currently have a dell studio 15 laptop with an ATI Mobility Radeon HD 3400 graphics card, i'm planning to upgrade to an iMac with the same 27 inch display as the one in this forum but i was hoping to continue to use this computer and use the iMacs great display as an external monitor whenever i want to use windows, i was wondering if my graphics card supports such a high resolution or not?
    Thanks

    Since I'm running Windows 7 Enterprise, I cannot use Windows Update as it is controlled by WSUS. Anyway, after hours of discussing with the IT experts at my workplace, none of them could solve the problem. They even said I can never run my video card again as it is not compatible with Windows 7.
    But I didn't give up.
    After hours of figuring out a solution, I decided to download and try out the "ThinkPad Switchable Graphics Driver for Windows 7 - ThinkPad R400, T400, T500, W500" and guessed what? It worked! The Catalyst center was also installed. Who knew it was the Switchable Graphics Driver when the ATI card was the only one shown in Device Manager to be not working.
    Here's the link:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73641
    I hope this works for all of you who had the same problems as me. Cheers!

  • What h/w to connect ACD to PC ATI Mobility Radeon X1300

    Hi – I have a 23” Apple Cinema display that I run with my Mac PowerBook G4. I now have a Lenovo T60 with an ATI Mobility Radeon X1300 graphics card. Two questions,
    1. What do I need to purchase to use the Apple display with my PC laptop?
    2. What kind of KVM do I need to switch my Apple keyboard, mouse, and USB hub between my PowerBook and the PC laptop?
    PowerBook G4 Mac OS X (10.4.9) 23" ACD; Lenovo T60 w/ ATI Mbility Radeon X1300
    PowerBook G4   Mac OS X (10.4.9)   23" ACD; Lenovo T60 w/ ATI Mobility Radeon X1300

    Hi @anglngr9 ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that after reinstalling Windows 7 when you connect a TV via HDMI  or watched a video on it the image would start to break and the freeze the computer. You have had this difficulty since you reinstalled Windows 7.
    I suggest you reinstall the original driver and then run the HP Support Assistant  to check for HP updates.
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    If you would like further assistance, please provide your exact model as HP manufactures more then one model of Pavilion DV7 t. 
    How Do I Find My Model Number or Product Number?
    For your convenience I am also including the HP Pavilion dv7 Entertainment PC Maintenance and Service Guide.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Ati Mobility Radeon HD 5870 in DV6-1144ET

    Well, I think my topic title is clear. I have HP Paviliom DV6-1144et notebook and ı want to upgrade my graphic card to Ati Mobility Radeon HD 5870, is it possible?
    Thank you...

    So sorry you can not do it wothout changing the whole system board.
    Better buy a new notebook compared buying a new system board.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • ATI Mobility Radeon HD 6370 switchable graphics driver

    Is there any way to get a new driver for the ATI Mobility Radeon HD 6370 switchable graphics card? I have a HP Pavilion dv7-4276nr Entertainment Notebook PC and the latest driver I can download from HP are from 2010!! Lots of games are not running properly because of the lack of updated drivers and I cannot download them from de ATI page since they wont work. Please tell me if there is any other place from where I can download a more updated driver. Thanks in advance.

    @stormsfury 
    I understand that you are looking for help with disabling the more powerful GPU on your notebook.
    I did some searching and found a few posts on this matter, by a few of the HP forum experts. Check through these pages:
    how to disable switchable graphics
    Disabling switchable graphics or setting global default.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Maybe you are looking for