Ati open source driver not working.

I have an ATI 4650 mobility radeon, and the open radeonhd driver and the catalyst driver work.  However, I would like to use the open radeon driver instead, yet when I install the driver and use Xorg -configure it just uses the vesa driver.  I tried configuring xorg.conf and it errors our with "No screens found."  I've been told by a few people that my card is supported by the open radeon driver, so I am at a loss as to why it doesn't work, unless it isn't really supported.
Last edited by cyclotomic (2009-06-27 07:00:04)

tomk wrote:Install radeonhd and run X with no xorg.conf - it will autodetect the driver.
The radeonhd works.  It's the radeon driver that doesn't work, I tried no xorg.conf and it still used the vesa driver.
Last edited by cyclotomic (2009-06-27 07:11:12)

Similar Messages

  • [ATI open source driver, laptop] Screen not refreshing properly.

    Hi guys, I've been using ATI Catalyst driver and everything was working well until I decided to switch to open source driver.
    Now I have strange problem. My screen is not refreshing properly, I mean, for example I use Facebook and I decide to read something in other card in browser and after I switch cards I can still see some of the facebook page elements, window title does not change. After I move cursor over page elements are refreshing. When I scroll page, even a little bit, it refreshes as well. Or I use terminal, I type some command, press enter and sometimes screen doesn't refresh and I can't see output until I try to resize window or select text (which I can't see...).
    Sorry for not the best description, I will give you screens tomorrow because today I can't.
    My graphics card is Radeon HD 5400 Series and I use ASUS X52J laptop.

    tomk wrote:Install radeonhd and run X with no xorg.conf - it will autodetect the driver.
    The radeonhd works.  It's the radeon driver that doesn't work, I tried no xorg.conf and it still used the vesa driver.
    Last edited by cyclotomic (2009-06-27 07:11:12)

  • Help with ati open-source driver :what problems with my xorg.conf?

    I removed vesa driver and then :
    sudo pacman -S xf86-video-ati libgl
    I have browser http://wiki.archlinux.org/index.php/ATI
    I add me to the group video,add radeon to my rc.conf.
    and changed my xorg.conf like that.and then I type "startx",It did work,but the resolution is not right (it should be 1027x768 but I got a resolution 640x480),and I run glxinfo it said :"unable to open  display"
    I'm sure the     HorizSync VertRefresh is right besause when I try catalyst it works well :<
    my card is ati X550
    Here's my config:(can anyone who's ati card work with open-source driver works well give me your xorg.conf ?THX!)
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "radeon"
    Load "glx"
    Load "record"
    Load "extmod"
    Load "xtrap"
    Load "GLcore"
    Load "dbe"
    Load "dri"
    Load "drm"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "ImPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 320 240 # mm
    Identifier "Monitor0"
    VendorName "KTC"
    ModelName "1700"
    ### Comment all HorizSync and VertRefresh values to use DDC:
    HorizSync 28.0 - 80.0
    VertRefresh 50.0 - 200.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RV370 [Sapphire X550 Silent]"
    Option "XAANoOffscreenPixmaps" "true"
    Option "AGPMode" "4"
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    Option "AGPFastWrite" "true"
    BusID "PCI:1:0:0"
    EndSection
    Section "DRI"
    Group "video"
    Mode 0666
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768"
    EndSubSection
    EndSection

    Ok, seems like you don't use [testing] because in this case x wouldn't even start, because RgbPath in the Section "Files" doesn't exist anymore and has to be removed.
    I do always recommend people to disable any kind of options in the Section "Device", if there are problems with the video card. You usually do not have to put radeon neigher into the Section "Module", nor into rc.conf! So remove them, radeon should be loaded because it's set as Driver in the Section "Device"
    Your problem with wrong resolution ... I'm not an expert in this, didn't ever have such a problem, but are you sure, that your HorizSync and VertRefresh values are right?

  • ATI open-source driver and modelines

    Since the 8.3x versions of fglrx do not work with custom modelines, I have tried to switch to the open-source driver. However, I still seem to have a problem with modelines. Here is the relevant section in my xorg.conf file:
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "LCD Panel 1280x768"
    HorizSync 30-82
    VertRefresh 40-70
    Option "dpms"
    # 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
    Modeline "1280x768_60" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
    EndSection
    Here is what I get when I start X (excerpt from Xorg.0.log):
    (--) RADEON(0): Virtual size is 1280x768 (pitch 1280)
    (**) RADEON(0): *Mode "1280x768_60": 68.9 MHz (scaled from 0.0 MHz), 49.0 kHz, 6
    0.0 Hz
    (II) RADEON(0): Modeline "1280x768_60" 68.93 1280 1296 1320 1408 768 771 777
    816
    I don't understand why the driver changes the modeline parameters. Any ideas?
    On a related issue - anyone got the 8.2x fglrx drivers working with the latest kernel and X? Everything was fine with my setup before I upgraded to 2.6.20 and 7.2.0.
    Elad

    What's changed?  If the monitor works fine (without bad resolution or the streaks characteristic of ugly refresh rates), I'd leave it alone.  The driver probably has its own ideas about modes.  Of course, that's just me.
    This stuff might concern you, from the radeon man page.
    Option "DDCMode" "boolean"
    Force to use the modes queried from the connected monitor.
    The default is off.
    Option "MonitorLayout" "string"
    This option is used to overwrite the detected monitor types. This is only required when driver makes a false detection. The possible monitor types are:
    NONE -- Not connected
    CRT -- Analog CRT monitor
    TMDS -- Desktop flat panel
    LVDS -- Lapto flat panel
    This option can be used in following format:
    Option "MonitorLayout" "[type on primary], [type on secondary]"
    For example, Option "MonitorLayout" "CRT, TMDS"
    Primary/Secondary head for dual-head cards:
    (when only one port is used, it will be treated as the primary regardless)
    Primary head:
    DVI port on DVI+VGA cards
    LCD output on laptops
    Internal TMDS prot on DVI+DVI cards
    Secondary head:
    VGA port on DVI+VGA cards
    VGA port on laptops
    External TMDS port on DVI+DVI cards
    The default value is undefined.
    Last edited by skale (2007-03-13 00:56:19)

  • Ati open source driver dual head problem

    I have an AMD FirePro M5950 video card in my laptop. Using the open source ATI driver I can't seem to get my dual monitor setup working and GDM won't even start. However KDM is working.
    Still, the problem I am having with KDM can be viewed in the following image.
    The display somehow starts a little left from the middle of the screen. When I continue moving the mouse to the right the mouse appears on the left part of the screen.
    How can this weird offset be fixed? Do some log files help, which one?

    append "nomodeset" in the bootloader, before booting, maybe that will fix the issue.

  • [SOLVED] Compiz, ATI 4850, open source driver: fail?

    Hi!
    I'm trying to use compiz with my ATI 4850 and open source driver, but it doesn't work.
    Actually I'm under GNOME.
    I used KDE and Kwin compositing using OpenGL works flawlessy. Where is the problem?
    When I launch compiz I get:
    IRQ's not enabled, falling back to busy waits: 2 0
    compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
    compiz (core) - Error: Failed to manage screen: 0
    compiz (core) - Fatal: No manageable screens found on display :0.0
    but...
    $ glxinfo | grep GLX_EXT_texture_from_pixmap
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
    Here's the complete glxinfo output:
    $ glxinfo
    name of display: :0.0
    IRQ's not enabled, falling back to busy waits: 2 0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: SGI
    server glx version string: 1.2
    server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample,
    GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
    client glx vendor string: Mesa Project and SGI
    client glx version string: 1.4
    client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
    GLX version: 1.2
    GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group
    OpenGL vendor string: Advanced Micro Devices, Inc.
    OpenGL renderer string: Mesa DRI R600 (RV770 9442) 20090101 TCL
    OpenGL version string: 1.5 Mesa 7.7
    OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_depth_clamp, GL_ARB_draw_buffers,
    GL_ARB_fragment_program, GL_ARB_imaging, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_point_parameters,
    GL_ARB_provoking_vertex, GL_ARB_shadow, GL_ARB_shadow_ambient,
    GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_MESAX_texture_float,
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_array_bgra,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord,
    GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
    GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_provoking_vertex,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
    GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
    GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, GL_APPLE_packed_pixels,
    GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
    GL_ATI_texture_mirror_once, GL_ATI_separate_stencil,
    GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip,
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_MESA_window_pos,
    GL_NV_blend_square, GL_NV_depth_clamp, GL_NV_light_max_exponent,
    GL_NV_packed_depth_stencil, GL_NV_texture_rectangle,
    GL_NV_texgen_reflection, GL_NV_vertex_program, GL_OES_read_format,
    GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
    Packages installed:
    ati-dri 7.7-1
    xf86-video-ati 6.12.4-3
    libgl 7.7-1
    mesa 7.7-1
    libdrm-git 20091222-1
    kernel26 2.6.32.7-1
    EDITED:
    installing libdrm 2.4.17-3 doesn't changes...
    Last edited by ziabice (2010-02-01 20:31:46)

    how are you launching compiz? try it through fusion-icon, it makes it much more easier. Try it under xfce/openbox whatever else you have, a month ago I couldn't start fusion under gnome, but with another card.
    I suppose you aren't using kms.
    I have those packages, and compiz is running fine with my hd 4850, but I'm using it as a standalone window manager. I tried it with xfce too, and it was fine.

  • Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

    Problem description:
    mac mail not opening, software updates not working, app store not opening. 10.9.5
    EtreCheck version: 2.0.11 (98)
    Report generated 1 December 2014 16:51:49 CET
    Hardware Information: ℹ️
      iMac (21.5-inch, Late 2009) (Verified)
      iMac - model: iMac10,1
      1 3.06 GHz Intel Core 2 Duo CPU: 2-core
      12 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 0/DIMM1
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400 - VRAM: 256 MB
      iMac 1920 x 1080
      BenQ GL2240 1920 x 1080 @ 60 Hz
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 1:32:17
    Disk Information: ℹ️
      WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (164.03 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GA11N 
    USB Information: ℹ️
      EPSON EPSON Epson Stylus S22 Series
      Canon MX410 series
      ASMedia AS2105 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk3s1) <not mounted> : 210 MB
      Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader 7.95 GB
      S.M.A.R.T. Status: Verified
      EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
      Western Digital My Book 1140 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
      Wacom Co.,Ltd. CTE-450
      Contour Design ShuttlePRO v2
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
      /Applications/Toast 10 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      /Library/Extensions
      [loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
      [not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
      /System/Library/Extensions
      [not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
      [not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ℹ️
      ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
      WkSvMacX: Path: /Library/StartupItems/WkSvMacX
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [running] at.obdev.LittleSnitchUIAgent.plist Support
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS4ServiceManager.plist Support
      [running] com.epson.epw.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [running] at.obdev.littlesnitchd.plist Support
      [failed] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.versioncueCS4.plist Support
      [loaded] com.barebones.textwrangler.plist Support
      [running] com.cleverfiles.cfbackd.plist Support
      [not loaded] com.gopro.stereomodestatus.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [invalid?] com.tvmobili.tvmobilisvcd.plist Support
      [loaded] fi.polar.libpolar.plist Support
      [running] fi.polar.polard.plist Support
      [failed] xxx.qnation.PeerGuardian.kextload.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac.helperTool.plist Support
      [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
      [running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
      [invalid?] com.plexapp.helper.plist Support
      [not loaded] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
      SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
      Dropbox Application (/Applications/Dropbox.app)
      Garmin ANT Agent UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      DirectorShockwave: Version: 11.5.7r609 Support
      Google Earth Web Plug-in: Version: 6.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      PandoWebInst: Version: 1.0 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.0 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 Support
      AdobePDFViewer: Version: 10.1.12 Support
      GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      fbplugin_1_0_3: Version: (null) Support
    Safari Extensions: ℹ️
      Open in Internet Explorer
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
      Adobe Version Cue CS4  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      GoPro  Support
      Growl  Support
      Java  Support
      MacFUSE  Support
      MenuMeters  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: NO - Auto backup turned off
      Destinations:
      Back Up [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Excellent
      Backup size 0 B > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          12% Google Chrome
          12% WindowServer
          4% Dock
          2% Little Snitch Agent
          2% SystemUIServer
    Top Processes by Memory: ℹ️
      399 MB iTunes
      322 MB mds_stores
      216 MB Google Chrome Helper
      193 MB Google Chrome
      155 MB com.apple.IconServicesAgent
    Virtual Memory Information: ℹ️
      6.64 GB Free RAM
      3.51 GB Active RAM
      1.36 GB Inactive RAM
      1.11 GB Wired RAM
      1.91 GB Page-ins
      0 B Page-outs

      [not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
    Un-install according to the developer's un-install instructions.
    You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
    CleanMyMac - Uninstall
    CleanMyMac2 Un-install
    After un-installing, run this program to make sure you got all the pieces.
    EasyFind – Spotlight Replacement
    Do a backup.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
    Restart, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.
    Thanks to leonie for some information contained in this.

  • Amber update but map and bere drive not work

    After amber update my here map and here drive not work just open the app but not open and close automatically

    Same thing here. I have tried all things and have a similar issue
    http://discussions.nokia.com/t5/HERE-Location-base​d-services/Settings-gt-Applications-does-not-have-​...
    NOKIA NEED HELP HERE !!

  • Window 10 upgrade. Graphics driver not working even after re-install

    Notebook pavilion DV6 3280.  Just upgraded to Windows 10 and AMD graphics driver not working even after re-install.  What do I do?  Is there another driver not on the HP Website that I should try?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Open dataset is not working in background in PRD

    Dear All,
    Open dataset is not working in background in PRD .
    OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    Whike running in foregroundits working dev as well as prd.
    but when i am running in background  its giving error like file not found .
    but al11 is working (i mean my file path is working ).
    Thanks N Regards,
    Srinivasa Reddy

    your authority team shall check the batch user of that abap!
    Could you please tell us the detailed error message?
    grx
    Andreas

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    Here's basic troubleshooting for iOS:
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
    (Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

  • I need a reliable office suite.   Open Office is not working well for me.  Any suggestions?

    I need a good reliable office suite.  Open Office is not working well for me.  Any suggestions?

    If you mean Open Office is not always able to correctly open documents received from clients created with MS Office, then the only real solution is to purchase Office 2011 for Mac. As good as some of the free alternatives are, they can't duplicate every feature of MS Office.

  • MacBook Pro Late 2011 : Optical Disk Drive not working?

    MacBook Pro Late 2011 : Optical Disk Drive not working?
    When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
    I have resetted SMC and PRAM; no chages.
    Don't know what to do. Please help.
    Thank you.

    Clean the heads.
    check to see if it is under warranty.
    buy external DVD/CD rw

Maybe you are looking for

  • Can anyone tell me is BC a stand-alone proprietary system or can it be hosted by another provider??

    @Have had a website built using BC by a website company that I have parted ways with after 18 months of hell.  I now have the BC platform and website, but have no idea what I'm doing.  They never activated the emails for me, but after tearing my hair

  • Each request gets a new session problem

    I have a standalone oc4j and I have deployed an application that uses Dynamic JDBC Credentials as described in ½How To Support Dynamic JDBC Credentials½. The application works fine when oc4j runs on every computer except one (the one it should be on)

  • 5400 rpm vs 7200 rpm?

    Ok so I have the lacie rugged 5400rpm drive which I thought was 7200 when I bought it but oh well. But I noticed when I do a aja system test I still get like 50mb/sec read / write. Isn't that good enough for video, nevermind the speed?

  • Loading library

    I have an ibook G4 256 memory. I opened iphoto. It asked to update the library. I said yes. The library began loading photos (there are no photos in the application at this time). It continues in loading mode non stop. I quit Iphoto. Reopened the app

  • How to add a tone to the ring tones

    I have a tune - it is the Last Post - that I have on my iPhone4S that I want to add to my ring tones so it can be the tone when the phone rings.  How do I do it?