ATI PowerCinema Upgrade with GemStar Guide Plus+

PowerCinema and Gemstar GuidePlus+ is available for the TV Wonder Elite. ATI PowerCinema
Will the MSI version of PowerCinema include this upgrade as well? I have registered my MSI PowerCinema with CyberLink but nothing is there for an upgrade. I hope we will not be left in the dark as having a working TV Guide would make PowerCinema bearable to use.
iQix

Kari,
I see that you've posted your issue in the Photohsop.com forum. That's likely a much better place than this forum (Photoshop Elements), since real Adobe employees post there and are often (but not always) quite helpful in resolving basic membership problems. There are almost no posts in this forum by Adobe employees or people who have much experience with Photoshop.com.
For what it's worth, Adobe seems to have finally acknowledged at a very high level that they have serious problems with customer service:
http://forums.adobe.com/thread/484712?tstart=0

Similar Messages

Help upgrade to Digital Vault Plus

I have recently left bt broadband and had an email notifying me that my digital vault would be cancelled unless i upgrade to digital vault plus. I have tried to do this but when I go to upgrade and enter my payment details it says it is undergoing maintenance. This has been going on for 5 days now and my deadline is tomorrow or my account is cancelled and I will lose all my photo's as they are from an old pc.
Please help.

Hi Billie123,
Welcome to the forum and thanks for posting. I am sorry for the problems that you have run into. Can you please get your details off to me and I will be able to help sort this out?
Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details, your Digital Vault username and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Boot with Startup CD plus simple backup?

Is it possible to reboot to a formatted iMac with just the original 10.6 startup
cd plus a simple backup (SilverKeeper) of library, system, applications and users? Now using 10.6.8.

Gordon McGilvray wrote:
Is it possible to reboot to a formatted iMac with just the original 10.6 startup
cd...
Yes you hold c and it boots off the installer disk that came with your comptuer or the OS X version you upgraded with.
You can also install OS X onto a external drive provided it's formatted HFS+Journaled in Disk Utility.
Gordon McGilvray wrote:
....plus a simple backup (SilverKeeper) of library, system, applications and users? Now using 10.6.8.
Ok, you don't need to boot from the installer disk, all it does is install OS X and perform some disk repairs and reformatting. You go this route if you have to rebuild OS X completely, or reinstall it over the previous OS X to solve issues. Are you having a issue of some sort?
We could use some more information why,
What you seem to want to do is CLONE your boot drive to a Disk Utility > HFS+ journaled formatted (self powered) external drive.
You can do this with the free (donations accepted) Carbon Copy Cloner, which clones and makes the external drive "bootable"
When your done cloning, the external clone is hold option bootable which you select the external clone to boot from.
CCC only does OS X, no bootcamp or filevaulted drives.
Once you have a clone, it can be updated much faster for small changes, the first clone takes longer as everything is copied.
Only use one drive for a clone, it's a good idea to have two drives with two clones rotated every couple of weeks, updated daily with the auto-updte feature.
This way if somethng goes bad, at least you can go back a week or two and recover by option booting off the older clone.
More hardware redundancy also protects your data from hardware failure. Store a clone off site for any potential fire, theft etc.

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus. Here is my issue. On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus.
Here is my issue.
On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus was it charged the phone as well. All worked great.
Now with the 6 Plus, neither of things work. The message on the radio (Kenwood) says I Pod error. The message on my phone say's "this device is supported".
I have called on this before and was told you are aware and that the issue will be addressed in a future update. There have been several updates on IOS 8 and the issue remains.

I have a Kenwood KDC-X695. When I purchased this stereo and had it installed, I had an ATT iPhone 4.
It worked with the stereo, but had a few issues. I had purchased a few audio books that I would listen to while driving. When I plugged it in it would immediately begin to play the book from the beginning or if I had been listening to music, it would start playing the song that was at the top of the song list.
The stereo came equipped with Firmware version 3.05. I upgraded to the iPhone 5 a year later. I had that phone for approximately 2 years. The song or book issue remained the same.
I just recently upgraded to the iPhone 6 and the Bluetooth function still works, however the USB port on the stereo that the phone plugs into to allow files on the phone to play through the stereo no longer works.
I contacted the service provider (Verizon) and after speaking to several different technical support technicians, they provided me the phone numbers for Kenwood and Apple because they were unable to help me.
I spoke with Kenwood technical support the following day and after a few fumbling miscues from the technical advisor, it was suggested that I upgrade the firmware, even though the Kenwood literature warns against this if the Bluetooth portion is working, because if there is a problem with the upgrade, it can render the Bluetooth useless and non-functional. The advisor did suggest the latest firmware on the second or third attempt, after I pointed out what I was able to glean from my initial search.
Later that day, I went back to the Kenwood site (from their homepage) and by using their selection tools, discovered that this particular model was only ever intended to be used with the iPhone 4S (the technical advisor was not aware of this, even though I mentioned this during my phone call earlier in the day). According to the Firmware selection tool, my iPhone 5 should not have worked with it.
I performed the Firmware upgrade, and it took 13 minutes. This was less than the 15 minutes that was forecast in the Kenwood literature. The Bluetooth still works but the USB cable connection still causes the unsupported device message that I received prior to the upgrade. I am incredibly annoyed and disappointed.
By upgrading to the iPhone 6, I have three choices; (1) only use the Bluetooth for phone calls without the ability to play other files from my iPhone 6 (2) forced obsolescence of my stereo, requires buying a new stereo (3) return my iPhone 6 and go back to my iPhone 5.
I do not believe that I should have to be a software/Firmware/hardware engineer, vetting every single device that I own; prior to upgrading a cell phone.
I am incredibly annoyed with Apple at the moment.
I have a separate Bluetooth headset that worked with both my iPhone 4 and iPhone 5 that the iPhone 6 simply does not recognize. That is another story for another time.
Currently, I am incredibly underwhelmed with Apple.

12.1.0.3 Agent Upgrade shows agent Not Upgradable with Oracle Home Property Missing

I have completed upgrading my Enterprise Manager OMS from 12.1.0.1 to 12.1.0.3 and am not in the process of upgrading the agents. Several agents show agent as not upgradable with error Oracle Home Property Missing and I am having problems trying to resolve that. In addition to the information in Chapter 5 of the upgrade guide I have found Metalink notes 1564380.1 & 1576084.1 and am trying to follow them.
Looking at the targets.xml on one machine I find -
<Target TYPE="oracle_home" NAME="cannon-columbo_cluster_home" IDENTIFIER="TARGET_GUID=615AE33355A4D531DBFC35831C2A2952">
<Target TYPE="oracle_home" NAME="mothpa.ucdavis.edu_mothpa1_oracle_database_home" IDENTIFIER="TARGET_GUID=DFE64CFD805C3C3F88E20EE0E74E556F">
<Target TYPE="oracle_home" NAME="LISTENER_SCAN1_cannon-columbo_oracle_listener_home" IDENTIFIER="TARGET_GUID=964A37630D9E7E321E0EA845B79F5CD7">
and following the notes I use emctl and run runCollection -
./emctl control agent runCollection mothpa.ucdavis.edu_mothpa1_oracle_database_home:oracle_home oracle_home_config
But the console still shows Oracle Home Property Missing. emctl listtargets shows -
mothpa1:product/agent12g/agent_inst/bin->./emctl config agent listtargets
Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
[cannon.ucdavis.edu:3872, oracle_emd]
[LISTENER_cannon.ucdavis.edu, oracle_listener]
[cannon-columbo_cluster_home, oracle_home]
[mothpa.ucdavis.edu_mothpa1_oracle_database_home, oracle_home]
[LISTENER_SCAN1_cannon-columbo_oracle_listener_home, oracle_home]
[cannon.ucdavis.edu, host]
[mothpa.ucdavis.edu, rac_database]
[cannon-columbo, cluster]
[has_cannon.ucdavis.edu, has]
[ricep1_ricep11, oracle_database]
[mothpa_mothpa1, oracle_database]
[mothpa, rac_database]
[ricep1, rac_database]
[+ASM1_cannon.ucdavis.edu, osm_instance]
[+ASM_cannon-columbo, osm_cluster]
[LISTENER_SCAN1_cannon-columbo, oracle_listener]
I have found some information pertaining to promoting targets but I don't understand that very well, essentially how to know if a target needs to be promoted. One note suggested running repvfy which I need to do. I will download it and run it to see if that helps but at the moment I am puzzled and seeking assistance. Any suggestions gratefully appreciated.
Thank you.
Bill Wagman

I will do so, thank you.
Bill Wagman

CRM upgrade with EHP inclusion

Hi All,
We are upgrading CRM 2007 to CRM 7. Both CRM Abap and Java stacks are installed seperately on different servers.
Can we inculde/ combine the CRM upgrade with CRM EHP1 upgrade? How big would be the time effort involved if we go ahead with CRM EHP1?
Thanks,
Antarpreet

Hi Antarpreet ,
Yes you can go straight from CRM 2007 to CRM 7 EHP1 in one step.
The main advantage is that you have the new functionality of EHP1 in a single project instead of upgrading to CRM 7 and then having to start another project to implement EHP1.
The guides are available at
http://service.sap.com/instguides
scroll down to
SAP CRM
on the main window
Select
SAP enhancement package 1 for SAP CRM 7.0
from the left side and click on upgrade for all the details on how to upgrade straight from CRM 2007 to CRM7 EHP1
Best regards,
Paul

When access WiFi home with new iphone6 plus, this WiFi stops

I upgraded into iPhone 6 plus.
When I access WiFi home with new iphone, this WiFi stops.
(Macbook pro worked with this WiFi.)
Then I reset the modem and router.
WiFi recovers.
But when I access WiFi with new iphone again, WiFi stops.

Hi JeremyDesign,
Start with the article below to troubleshoot issues with Wi-Fi on your iPhone 6 plus. To do that, start with forgetting the network by going to Settings > Wi-Fi, tap the info button to look at the settings and you will see the option to forget it. Join the network again and test it.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/en-us/TS1398
Take care,
-Norm G.

HT4972 Can iPad2 be upgraded with ios 5.0 ?

Can iPad2 be upgraded with ios 5.0 or above version ?
If yes, please let me know the process.
Rgds

The iPad 2 can be upgraded to 6.1.3.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848

How can I upgrade my iCloud account's storage but pay for the upgrade with another Apple ID?

I want to upgrade my iCloud account so that I can back-up my iPhone, however I would like to pay for the upgrade using a different Apple ID than the Apple ID associated with my iCloud account. I can not figure out how to do this, when I hit buy after selecting my desired plan it wants be the buy the upgrade with the Apple ID my iCloud account uses. Please help!

I don't think that's possible. (If you're trying to get it on another credit card, one option would be to purchase an iTunes gift card with it and redeem it to create an iTunes store credit. Storage upgrades will first charge your iTunes store credit before charging your card.)

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

How many computers can be upgraded with one 1 purchase mountain lion?

How many computers can be upgraded with one 1 purchase mountain lion?

What if I have a Mac with a different apple ID. Can I sign out of that ID and sign in with my other ID and still download it with one purchase?

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!

Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

What hard drive can I upgrade with on iMac intel early 2010

what hard drive can I upgrade with on iMac intel 27 inches early 2010

You can install any 3'5" SATA hard drive on a Late 2009 iMac. Have a look at OWC > http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
Note that Late 2009 and later iMacs have got the temperature sensor inside the hard drive. If you install a hard drive without a sensor, fans won't work correctly. Read > http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs

ATI PowerCinema Upgrade with GemStar Guide Plus+

Similar Messages

Maybe you are looking for